Denon AVR-1909 and Apple TV reverting back to 720p

I have my Apple TV running through my Denon AVR-1909 amp (HDMI). If both units are off and I start them up, my Apple TV reverts back to 720p resolution. The resolution before I turned off the Apple TV is set to 1080p.
It wasn't until I ran the Apple TV through this Receiver did I start experiencing this problem.
If the receiver is already on, then the resolution on Apple TV remains at 1080p when I turn it on.
I'm using a Harmony One Remote to Turn on my devices. I have setup the functionality to Start the receiver first, then I have a created various delays before it starts the Apple TV, thinking that the amp needs sometime before it sends a signal. Even with this delay, the problem still exists.
Is anyone else experiencing this issue, and is there a fix?
Any help would be greatly appreciated.

Welcome to the Apple Community.
Contact the developer of the Air Video app.

Similar Messages

Denon AVR-X1000 and Apple TV

Does Denon AVR-x1000 cooperates with Apple TV 3rd generation perfectly?
Is someone tried that?

Search the forums or google and find out for yourself.
Do you have a specific issue?

My APPLE ID is NOT working properly. I am frustrated beyond belief I have tried time and time again to change my apple ID and it keeps reverting back to my original ID!! I even set up a new email to try to submit a new id and it still does not work

My APPLE ID is NOT working properly. I am frustrated beyond belief I have tried time and time again to change my apple ID and it keeps reverting back to my original ID!! I even set up a new email to try to submit a new id and it still does not work

To change your Apple ID, follow these steps:
Go to My Apple ID (appleid.apple.com), click "Manage your Apple ID", and sign in.
If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you are unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
In the "Apple ID and Primary Email Address section," click Edit.
Enter the email address you want to use, then click Save Changes. Apple will send a verification email to that address.
Open the email from Apple, then click Verify Now in the email.
When the My Apple ID page opens, sign in with your renamed Apple ID.
If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID.
After you see a message indicating that verification is complete, remember to update all of the stores and services that you use with your Apple ID.

When I stream videos from my laptop onto my Apple TV via my iPad 2 using the Air Video app/server the video plays great however when I pause the video the Apple TV reverts back to the home screen within a few seconds and then when I want to restart watchi

When I stream videos from my laptop onto my Apple TV via my iPad 2 using the Air Video app/server the video plays great however when I pause the video the Apple TV reverts back to the home screen within a few seconds and then when I want to restart watching the video I have to re-buffer the video. Is there any way I can stop the Apple TV from reverting back to the home screen when I pause the video I’m watching?

Welcome to the Apple Community.
Contact the developer of the Air Video app.

Denon 791 Receiver and Apple Tv

I have a Denon 791 Receiver and Apple Tv. Which source do i connect the apple Tv to? thanks

I also have an AVR-2113 and am experiencing this issue with Apple TV 3G. I have to switch everything off for up to a minute, sometimes disconnect the HDMI cable and then switch it all back on again. I haven't worked out which order I need to turn stuff on in. Sometimes it takes me about 5 attempts before the things works.
It usually goes like this:
* Turn everything on
* Apple logo appears
* Apple logo disappears, I receive a warning from the TV that there is no HDMI signal
* pull out the HDMI cable from the Apple TV
* DENON logo appears on the screen
* plug it back in
* No HDMI signal warning message reappears
This sounds like some HDMI handshaking issue between the Apple TV and the Denon receiver. Is this Apple's fault, Denon's, or a mixture of the two?

My ipad touch wont play music, an arrow flashes by the battery icon, which is charged and it just reverts back to the selected song without playing...what can i do to fix this?

Help!
My ipad touch wont play music, an arrow flashes by the battery icon, which is charged and it just reverts back to the selected song in a second without playing...what can i do to fix this? thanks, joe

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

Even via time machine the new osx lion has deleted all my latest files in iPhoto and will only revert back to an old 2009 backup?

even via time machine the new osx lion has deleted all my latest files in iPhoto and will only revert back to an old 2009 backup?... Help?!

Have you verified that the original files are missing from the Originals/Masters folder? There are time when the library might appear empty due to a damaged database file but still has the files. If you can open the library package via the Finder to see if the files are really missing or just can't be seen by iPhoto there are fixes you can try.
If the files are there make a temporary, backup copy of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Denon AV receiver and Apple TV

Why doesn't Apple TV show picture or sound when hooking up in Denon AVR-1912 receiver? Apple TV works fine when plugging directly into TV.

I also have an AVR-2113 and am experiencing this issue with Apple TV 3G. I have to switch everything off for up to a minute, sometimes disconnect the HDMI cable and then switch it all back on again. I haven't worked out which order I need to turn stuff on in. Sometimes it takes me about 5 attempts before the things works.
It usually goes like this:
* Turn everything on
* Apple logo appears
* Apple logo disappears, I receive a warning from the TV that there is no HDMI signal
* pull out the HDMI cable from the Apple TV
* DENON logo appears on the screen
* plug it back in
* No HDMI signal warning message reappears
This sounds like some HDMI handshaking issue between the Apple TV and the Denon receiver. Is this Apple's fault, Denon's, or a mixture of the two?

Strange problem with mac mini hdmi, denon avr 3310 and itunes

Hello,
I just bought the new mac mini with HDMI. It is connected via HDMI to my receiver Denon AVR 3310. The receiver shows that it has "multi channel in" on the display.
I made all the configurations so that i can watch dvd an the mac mini. When i play a movie with Dolby Digital the receiver does show that on the display and playback is possible without any problems. I hear sound on all my 5.1 speakers.
The big problem is with iTunes. When I want to watch rented series, for example Dr. House, only 2 speakers of my 5.1 are used. And when I change to surround in iTunes I can only hear static noise.
What is the problem? Did I make a wrong configuration or is something wrong with iTunes?
Thanks in advance

Great news! My Mac mini is sending true 5.1 to my reciever through the HDMI cable! Okay so here's my list of gear.
MAC MINI 2011 2.5 i5 8gb ram
Using a quality audioquest hdmi I have connected my Mac mini to my Denon 1712 Reciever. I have connected this hdmi cable into hdmi port entitled game 2. I have connect my reciever to my tv with a monster 1000 hdx thx certified hdmi cable. It has a transmission sped of 17 gb or so...meaning it can handle transmitting 3d...if only I had a 3d tv.
Okay so that's the gear. Now onto the changes in audio midi. Open audio midi and Simply change it to 48000 hz and to 2 channel 16 bit integer. That's all I did and now it works. Before I had it set to 8 channel 24 bit and when I pulled up my surround sound options I could pretty much only get multi channel stereo. Now I can get several Dolby choices.
The voices are coming out of the center speaker and all the action is coming out of the other speakers....so in other words 5.1 surround sound has been achieved on my Mac mini 2011 which has Lion on it.
I have tested this with iTunes and Netflix. Both are in 5.1 and sound great. In iTunes I have tested both music and digital copies of movies. Both worked flawlessly.
Rejoice Mac mini owners 5.1 surround is now possible over your Mac mini 2011 edition with just an hdmi cable to your reciever. You can throw away that toslink cable becuase now you don't need it!
I hope this works for you. Remember not all hdmi cables and the same holds true for your reciever. If it does not work consider getting either audioquest or monster....everything else is junk.

I updated my phone to 5.1 and now my pictures are missing, my calendar is blank and my contacts reverted back to a year ago

I updated my iPhone 3 to 5.1 and now my calendar is blank, my contacts and photos reverted back to about a year ago!!

Contacts should be synched to your computer (outlook, address book) or a cloud service (iCloud, Google). If you haven't been using your phone as recommended, your contacts are gone.

Ipad lock screen and apple sign flashing back and forth.

When I went to use it this morning the white apple logo on a black screen is flashing back and forth with the lock screen. It won't turn off. I tired a hard reset and it didn't work either. I let it die completely and then plugged it back in. Nothing has worked. I am currently in the process of downloading iTunes onto my laptop but from there I'm not sure where to go.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Apple id reverting back to an old email

All phone settings are set to correct apple id, iTunes, iCloud, email, app store etc
But when it comes to update an app and apple id requires you to enter a password its brining up an email which is over 10 years old thats my girlfriends which has only been used due to verifying music on my phone.

Once you purchase or download an app that app is forever connected to the Apple ID used to purchase or download it. even after you change Apple IDs if that app requires an update it will ask for the old Apple ID and password before it can be updated. You can ntering that old ID and password or delete the app and download or purchase it again Using your current Apple ID.

HT6312 I updated to iCloud Drive prematurely and want to revert back to iCloud. Is that possible?

How can I (or can I) revert to regular iCloud so that my documents can be easily accessible, editable, and sharable across my 4 Apple devices which I use daily?

No, sorry. There is no way back. You can disable iCloud drive, but it will not enable "Documents in the Cloud" again. You can only wait for Yosemite to be released. See the links below:
iCloud Drive FAQ
Be aware, be careful, be prepared for iCloud Drive | TUAW: Apple news, reviews and how-tos since 2004

8130 pearl - ringtones and desktop keep reverting back to preloaded version

If there is a thread that addresses this please direct
I am a new owner. I have transferred pics to data card and selected for desktop, however every few days the phone reverts the desktop back to one of the preloaded versions.
The same is happening with my ringtone... Installed an mp3 and selected as ringtone... Then reverts to a randomly selected pre installed version ringtone
Ideas? Have I got something set wrong?
Solved!
Go to Solution.

Yes, that is correct. That is how I have it.

Air play Icon Missing at Iphone, Ipad and I tunes.Hi, I have a Denon AVR 2112CI and says that support Airplay feature. I can not play any music trought the Denon receiver.

Hello . jus ask for help. I installed 2 Denon receivers AVR 2112ci. This amplifiers says built in airplay feature. I can not do anything. The airplay con not appears at Itunes in my toshiba lap, and same happen with my iPhone and with Ipad. Some says that we need to turn on Home sharing . I did it, but icon still missing.
The only thing that i want is stream my music with Denon amplifiers at those 2 diferrent zones.
Please any help ?

Hello . jus ask for help. I installed 2 Denon receivers AVR 2112ci. This amplifiers says built in airplay feature. I can not do anything. The airplay con not appears at Itunes in my toshiba lap, and same happen with my iPhone and with Ipad. Some says that we need to turn on Home sharing . I did it, but icon still missing.
The only thing that i want is stream my music with Denon amplifiers at those 2 diferrent zones.
Please any help ?

Denon AVR-1909 and Apple TV reverting back to 720p

Similar Messages

Maybe you are looking for