Denon AVR 591 stereo output instead of 5.1 from new apple tv(3rd gen)

I have a setup such as:
aTV 3rd gen -> HDMI -> Denon AVR591 -> HDMI -> Sony KDL 40V5100
my speaker setup is a 3.1, 2 fronts, center and sub
i'm having trouble getting a 5.1 output when i'm streaming music from my imac through home sharing, and also netflix.
i do not have an extra optical port(used by my xbox) to bypass this issue, so i'm wondering if this is a known problem, or something wrong with my setup.
my PS3 run just fine in 5.1(multi ch.) when it streams the correct format through a single HDMI cable.
this is a brand new apple tv that i just got today from the mail, and hoping someone can shed some light in my problem.
Thanks in advance!

I was only able to get 5.1 via optical, DTS was fine via HDMI.

Similar Messages

PDF creator display bold output instead of defined mix from SAP Script

Dear all,
we've a little trouble with the pdf converter in SAP 4.6C.
In the systeme there is a custom based soft font implemented (RSTXPDF2). The Forms work with SAPScript and use the global imported soft font , the direct printed output and local created pdf are fine.
But when i try to use the archive for this documents the output use the right font, some characters are different so that i can see that the creator use the font.
But the created and stored document in the archiv display all character in bold version, so that this isn't like the original.
I try to use the testreport RSTXPDFT4 from sap to create a pdf download from spool, which was created witht the printer that create the paper output as well.
The created pdf has the same problems, so that all is printed in a bold version of the style.
The form has a headline in bold and after this there are some normal characters parts and two parts with bold words.
It's seems that the data in the output send all, but the converter can't interpret the bold end information as in the paper output.
The target solution is to archive the pdf, but when the short spool isn't fine so i think that the archive printer isn't the problem. The printer was copied from the default, because the archivlink type can't use global softfonts.
The fonts are activated in the se73 for the archive printer type and e. g. sapwin.
Hint when i use the archive default which can't use softfonts the courier was used and the different areas will be display in bold and normal as defined.
Every hint is welcome to find out why the convertor makes all in bold.
Best regards
Thorsten Stracke

Dear all,
we've a little trouble with the pdf converter in SAP 4.6C.
In the systeme there is a custom based soft font implemented (RSTXPDF2). The Forms work with SAPScript and use the global imported soft font , the direct printed output and local created pdf are fine.
But when i try to use the archive for this documents the output use the right font, some characters are different so that i can see that the creator use the font.
But the created and stored document in the archiv display all character in bold version, so that this isn't like the original.
I try to use the testreport RSTXPDFT4 from sap to create a pdf download from spool, which was created witht the printer that create the paper output as well.
The created pdf has the same problems, so that all is printed in a bold version of the style.
The form has a headline in bold and after this there are some normal characters parts and two parts with bold words.
It's seems that the data in the output send all, but the converter can't interpret the bold end information as in the paper output.
The target solution is to archive the pdf, but when the short spool isn't fine so i think that the archive printer isn't the problem. The printer was copied from the default, because the archivlink type can't use global softfonts.
The fonts are activated in the se73 for the archive printer type and e. g. sapwin.
Hint when i use the archive default which can't use softfonts the courier was used and the different areas will be display in bold and normal as defined.
Every hint is welcome to find out why the convertor makes all in bold.
Best regards
Thorsten Stracke

Discrete stereo outputs in Vi

Is it possible to use the XtremeMusic card to output 4 seperate, discrete, stereo outputs instead of 7. in Vista?By this, I mean be able to assign different sets of outputs to different applications?

A USB headset works essentially as a soundcard, it is it's own audio device and does not use the soundcard. That also can mean that having both set up could cause a conflict, as applications (and Operating Systems) will usually search for a default audio device.
This may be something you need to set up in an application (like the voice app). It would not really relate to the soundcard as it does not work together with the USB headset.
Cat

Macbook Pro with Denon AVR-X3000 / sound problem

Hi there..
I have a retina macbook pro and I am trying to connect it to Denon AVR X3000 surround receiver via. HDMI
Denon is connected to the TV from HDMI out, so I have no problem with sending the video to the LCD via. receiver.
My problem is with the sound modes.
Normally, as the most basic example, when I connect my Apple TV to Denon and LCD with the same HDMI way, I get all the digital sound modes such as Dolby Prologic II, Dolby True HD, DTS: Neo6 etc..etc... And I get a very quality sound, with all the channels seperated etc.
But when I connect my Macbook Pro to the system with the same way, what I can only get from the receiver are : STEREO, MULTI CHANNEL IN, MULTI CHANNEL STEREO and VIRTUAL.. I do not see any DTS, Dolby Digital, etc.
Also, I can only get the "surround effect" from "MULTI CHANNEL IN" sound mode, but this time the audio quality is really bad...
Tiny Apple TV gives me great sound but MB Pro cannot..
I have tried to change some settings from the AUDIO MIDI setup, I chose 5.1 multi channel but nothing happens from here...
By the way, I am using Mac BluRay player and I am running bluray films from my computer.
In my opinion, MBP cannot send high definition video and dolby-dts-prologic sound to the receiver at the same time..
I don't have quite experience about this issue, maybe it is something, very simple. But I couldn't manage it.
Maybe MBP is not capable of doing this... If so, I will be really disappointed because I was looking forward to purchase a Mac Mini and use it as a HTPC..
All suggestions, recommendations are highly appreciated... THX

Hi, i don't have a solution but i can share my experience with you which is similar. Mac Mini connected to Denon. On Mavericks OS btw.
two things.
1. i was fiddling with the System preferences at one time, under Sound, playing around with the output options, honestly forgotten what i did but i managed to get into all the options as per normal, such as Dolby Cinema. Problem is, once i restarted the Mini, the same problem occured. Only those as u mentioned, Multi IN etc.
at this point, i am still trying to figure out.
2. I tried switching to windows, and the problem disappear. Meaning, the sound mode options are as per usual.
u have any luck yet ?

Strange problem with mac mini hdmi, denon avr 3310 and itunes

Hello,
I just bought the new mac mini with HDMI. It is connected via HDMI to my receiver Denon AVR 3310. The receiver shows that it has "multi channel in" on the display.
I made all the configurations so that i can watch dvd an the mac mini. When i play a movie with Dolby Digital the receiver does show that on the display and playback is possible without any problems. I hear sound on all my 5.1 speakers.
The big problem is with iTunes. When I want to watch rented series, for example Dr. House, only 2 speakers of my 5.1 are used. And when I change to surround in iTunes I can only hear static noise.
What is the problem? Did I make a wrong configuration or is something wrong with iTunes?
Thanks in advance

Great news! My Mac mini is sending true 5.1 to my reciever through the HDMI cable! Okay so here's my list of gear.
MAC MINI 2011 2.5 i5 8gb ram
Using a quality audioquest hdmi I have connected my Mac mini to my Denon 1712 Reciever. I have connected this hdmi cable into hdmi port entitled game 2. I have connect my reciever to my tv with a monster 1000 hdx thx certified hdmi cable. It has a transmission sped of 17 gb or so...meaning it can handle transmitting 3d...if only I had a 3d tv.
Okay so that's the gear. Now onto the changes in audio midi. Open audio midi and Simply change it to 48000 hz and to 2 channel 16 bit integer. That's all I did and now it works. Before I had it set to 8 channel 24 bit and when I pulled up my surround sound options I could pretty much only get multi channel stereo. Now I can get several Dolby choices.
The voices are coming out of the center speaker and all the action is coming out of the other speakers....so in other words 5.1 surround sound has been achieved on my Mac mini 2011 which has Lion on it.
I have tested this with iTunes and Netflix. Both are in 5.1 and sound great. In iTunes I have tested both music and digital copies of movies. Both worked flawlessly.
Rejoice Mac mini owners 5.1 surround is now possible over your Mac mini 2011 edition with just an hdmi cable to your reciever. You can throw away that toslink cable becuase now you don't need it!
I hope this works for you. Remember not all hdmi cables and the same holds true for your reciever. If it does not work consider getting either audioquest or monster....everything else is junk.

Apple TV to Denon AVR-887

I have a Denon AVR 887 and I would like to figure out how I can use the ATV. The Panasonic TV Monitor is a great distance from the AVR so the Video is from Component Connections. Audio is from sperate speakers mounted around the Panasonic TV. The AVR will not convert the HDMI from the ATV to the component output.
Is there a conversion cable or box that can take the HDMI from the ATV to a componet output for the AVR?
Will I also need the Optical digital audio output cable to get the audio into the system?
Happy New Year.

Yvonne,
For about $35 bucks you could try this device here: http://www.amazon.com/gp/product/B002WBOQPU/ref=as_li_ss_tl?ie=UTF8&tag=wwwallab ouc00-20&linkCode=as2&camp=1789&creative=390957&creativeASIN=B002WBOQPU
It converts an HDMI to Component so you would plug your AppleTV into this device and then the device into your projection TV
By Apple policy I need to let you know that if you visit that link we might benefit or even profit from it. This is an affordable solution versus buying a new TV and you can enjoy all the cool stuff of Apple TV
http://www.allabouthomeelectronics.com/apple-tv-airplay.html

Uverse input on Denon AVR not providing audio

I have my Uverse DVR connected via HDMI to my Denon AVR-X2200 connected to my TV via HDMI. When switching through several stations quickly on SD channels, I get no sound. This does not occur when going through HD channels.
I have already tried rebooting the box, I have rebooted the box and gateway, I have tried setting the resolution to 720p and I've tried turning off Dolby Digital, none of the above has helped. I know this has to be an issue with the uverse equipment as none of my other inputs are having this problem. The uverse boxes are Cisco boxes, I'm having issues with the main DVR as well as the satellite boxes. I have no intention of using optical and component cables as I'm not paying for the service so that I can view things in a sub-par environment. Component video is awful.
Is there a solution to this problem, or do I have to buy older equipment just to handle Uverse's equipment?

Just because your audio doesn't go over HDMI doesn't mean your picture has to not use HDMI, and it should also be noted that Component may actually give you a better picture than HDMI.
So... why won't you use optical for audio?
Also, since this is SD channels, which are stereo only, you could use the L/R audio cables for that, though switching the amp between the stero inputs vs the HDMI for HD could be problematic. Optical wouldn't have that issue

Im having trouble connecting ipod to denon avr x1000

im having trouble connecting ipod to denon avr x1000

Those converters like the AsanteTalk are notorious for not re-acquiring Printers that drop out for any reason.
Get everything else powered up, then cycle off the AsanteTalk, count slowly to 10, then power the AsanteTalk on last.

How to record stereo output in Logic Pro X

I am trying to record the stereo output in Logic Pro X on the spare stereo track. In other words what I would like to do is to record audio/software instruments tracks existing in my project as well as my real time performance on top of that (let's say a software synth played using a midi controller) to a new stereo track, just like if I were recording Logic's stereo out to an external recorder except in this case you are recording that to a spare tracks within Logic X.
Any help will be highly appreciated.

Send everything to Bus X - Bus X to StereoMstr (for monitoring)
Create new Track/Channel
- for Input choose Bus X
- for Output choose No Output
Engage Record on the newly created track and off you go.
Have a nice day!

Printing Polish characters # output instead of "

Hi all,
Please can you assist.
I have been setting up mutliple printers for the business in Poland. The printers are all operating fine apart from the fact they output # instead of ".
All printers are using the recomended device type I2HP4, code page 1416.
All the information i could find suggests that the # symbol is used when the correct character is missing from the code page. I have however checked code page 1416 and the " symboll does exist with sequence U+0022.
In case its relevant the print method is U.
Any ideas where the problem may be?
Thanks
Graham

xmltype
(<Model_ID><![CDATA[' ||'U252'||C.SEGMENT1||']]></Model_ID>')

How to use logger to send any output instead of the console?

How to use logger to send any output instead of the console?

How to use logger to send any output instead of the
console?There are three commonly used logger inferfaces, the log4j, the java.util.loging and the Commons logging (which works with either.)
You create a logger object, generally one for each class. Normally a private static variable points to it and it has a name equal to the FQN of the class.
e.g.
package org.widget;
public class MyClass {
private static Logger log = Logger.getLogger("org.widget.MyClass");That's the java.uitil.Logger formula.
Then there are method on the logger to call for various kinds of output. There' are different logging levels, priorities like SEVERE or DEBUG. When running the logs are configured to ignore messages of less than a set priority.
You can also pass an Exception or Error to the logger which will log the stack trace.

Apple TV 2/ Denon AVR 2311CI zone 2 issues

I have an original Apple TV hooked up to my Denon AVR 2311CI ss receiver. I needed to hook the red and white RCA cables to pass an analog signal to get the audio to pass through to zone 2. The next gen Apple TV has no RCA jacks, just digital optical. That does not pass the audio to zone 2. Has anyone tried this and got zomne 2 audio to work with the newer Apple TVs??

I am also having this issue (picture - but no sound) - but with an Onkyo AV Receiver (TX-SR674). And unfortunately, my TV doesn't have HDMI - just DVI - so I can't pass the AppleTV through my TV to get the audio to the AV receiver - or even get the audio from the TV's speakers. So unless I can firgure this out, I either have to return the Apple TV, or buy a new TV and/or receiver. As much fun as that sounds, I don't really have the spare coin to make it happen. I've tried every possible setting on the Onkyo (which I use with a DirecTV receiver and a Sony Blu-ray player just fine - using HDMI) - but no luck. The only way I've seen it work is using my Dell computer Monitor (which has HDMI in and analog audio out). So it doesn't appear to be a defective Apple TV. Oh - and I can't get any digital audio out of the Apple TV either. I tried two different AV receivers that have optical tos-link inputs.
Any help is greatly appreciated!
Cheers (and Happy New Year).

Denon AVR 1709

I cannot get Apple TV to work through my Denon AVR. Is this a common problem as I have now heard that there maybe compatibility issues.

Welcome to the Apple Community.
Connect the Apple TV to the TV directly temporarily to eliminate any possibility the problem lies with either of these devices.
Check your Denon manual to make sure that any port mapping has been carried out properly.
Try powering up the devices in different orders, the Apple TV may not turn on if it is unable to detect a supported TV.
If necessary you will have to connect the Apple TV and TV directly and connect the receiver to the Apple TV by optical cable for audio.

ATV and Denon AVR

Just got an Apple TV. I've hooked it up to my home theater (to a denon AVR-4806) receiver via component and optical cables. I hooked the component cables into my DBS ports. The ATV works fine as long as I select Pure Direct as the sound mode and I get sound out of the r,l and subwoofer channels. If I try to get the sound to go to my 5.1 speaker system, the sound goes to all speakers but then I lose the picture on the TV. Anyone have a solution to this problem or is it a limitation f the current software?
Thanks

The Denon should have an auto detect mode for the optical audio data. Try that and see if that works. Still puzzling why the audio mode changes the video unless the component video inputs somehow are being switched off when you change the audio mode.
I elected to just run the component video right to my HDTV as I only have one component video source, the Apple TV. I use the Denon AVR3300 to do the audio source switching only for the ATV.
Howard

Imported concert from MainStage 2, trouble with stereo output.

Hi everyone,
I've imported a concert from mainstage 2 in the newest 3. I don't know why but I found many trouble when setting the output of the project.
I'm using a Focusrite Saffire Pro 24 DSP and when a stereo output is set, I see in mainstage the L-R indicator bars blink. Only the Left indicator works correctly, the Right continue blink and I have no output from that connector.
Has Anyone encountered the same issue? Can anyone help me, or could anyone drive me on the right-way to find an answer?
If more informations are needed just ask
Thanks to everyone.

Ummm my apologies if I missed it, but Ive read through this thread and Im not sure if theres an answer to the original question. Ive got a similar situation, AVI out of PP3 with all sources stereo, the AVI sounds great in media player and is definitely stereo. Bring the AVI into Encore 2 and the resulting DVD is double mono using the left channel only heres the strange thing, I get the same results using Nero Vision Express. I am 100% sure the AVI is stereo, it includes clips from an old Beatles song where the old school stereo imaging put all of the vocals into the left channel and the instrumentals into the right, well, the instrumentals are gone on the DVD and Ive got nothing but vocals. Again, the AVI sounds fine, just for kicks I even burned the raw AVI to DVD and popped the disk into a set-top player and it played fine something is wrong with the transcoding and its a problem for both Encore and Nero. Any know whats up? Are we calling it a bug? Seems kind of serious if it is, the kind of bug that should keep a product from launching.

Denon AVR 591 stereo output instead of 5.1 from new apple tv(3rd gen)

Similar Messages

Maybe you are looking for