Denote browsed sites by changing color of heading

Early versions of Firefox used to change the browsed sites from blue to red so that when you returned to the principle listing page all the sites you had already browsed were highlighted in red. This made it easy to keep track of where you had been. Is this feature still available? I sure miss it!

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"

Similar Messages

The browser has a green color at the top of the page. This green also appears inside the page with certain sites. I'm unable to change it-it's ugly and annoying since I do not know it happened.

The browser has a green color at the top of the page. This green also appears inside the page with certain sites. I'm unable to change it-it's ugly and annoying since I do not know it happened.

Read the article below:
iPhone: Troubleshooting activation issues

HOW TO CHANGE COLOR ON LITTLE SUB TITLE BAR UNDER THE HEADING?

Hi,
I was successfully able to change the background color on the templates headed, but that little bar under it, that displays the links to your other pages within the site did not change with it, and I have tried everything but have not been successful. How do I do this?
Thanks
Jennifer

Those navbar links are generated by javascript and are not user editable. You can create your own navbar using a Text Based Navbar and then have complete control over font (stick with the Web Safe Fonts), color, size and rollover colors.
Cyclosaurus has posted an HTML snippet that can change the font style of the navbar of each page that the snippet is applied to. You can find it here: http://discussions.apple.com/message.jspa?messageID=8596966#8596966. This page tells how tol change the navbar test to all caps: http://discussions.apple.com/thread.jspa?messageID=8523772#8523772.
And the following code, again courtesy of Cyclosaurus will change the rollover color of the navbar on any page the snippet is added to:
HTML Widget to change rollover color for this page in the navbar above to orange The code used, courtesy of Cyclosurus, is:
<script type='text/javascript'>
styleCSS = 'div#widget0 li a:hover{color: orange;}'; // change color to your liking;
eval(function(p,a,c,k,e,r){e=function(c){return c.toString(a)};if(!''.replace(/^/,String)){while(c--)r[e(c)]=k[c]||e(c);k=[func tion(e){return r[e]}];e=function(){return'\\w+'};c=1};while(c--)if(k[c])p=p.replace(new RegExp('\\b'e(c)'\\b','g'),k[c]);return p}('1=2.3.5(\'6\');1.4.7=\'8/9\';1.4(\'a\',\'b\');1.c=d;2.3.e(\'f\')[0].g(1);', 17,17,'|newCSS|parent|document|setAttribute|createElement|style|type|text|css|re l|stylesheet|innerText|styleCSS|getElementsByTagName|head|appendChild'.split('|' ),0,{})); </script>
You can see an example of that in this demo page: Misc. Items.
OT

Visited Sites do not Change Color

Since the recent Safari upgrade, the sites I have visited do not change color. For example, if I do a Google search, click the first link and then either use the back button or the refresh button in the Google search field, the site I just visited is not displayed in a different color. This is happening on other sites as well but not all of them. Project Gutenberg works as I expected.
Any suggestions on how to fix this? It makes searching more difficult since I now mentally have to keep track of which sites I've visited. I realize this problem has cropped up before, but the answers are from several years (and versions) ago.
Thank you in advance for any help you can give me,
Frank

You can use code in userContent.css or use the Stylish extension to override the page colors.
I use code like this:
<pre><nowiki>a:visited {color:#e08!important;background-color:#eee}
a:visited * {color:#e08!important;outline:1px dotted red!important;outline-offset:-1px}
a:visited img {background-color:transparent}
</nowiki></pre>
*Stylish: https://addons.mozilla.org/firefox/addon/stylish/
*http://userstyles.org/help/stylish_firefox
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration

How to change color in BEx Browser?

Hello Friends,
How to change color in BEx Browser?
My browser shows all the report description with pink color. I want to change the color.
Please let me know.
Thanks in advance.

Hello Bhavin,
It seems the patches for BW Add-On are being kept pretty much in sync for 6.20 and 6.40 (i.e they seem to be released at around the same time, even that the patch level numbers are different).
However, at BW Add-on Patch level 4 on a SAPgui640 machine, we didn't have the "pink font" problem.
It may be that BW 3.5 Add-On patch 6 will have a similar effect for you - it may be worth trying.
Here is the link to the BW3.50 patch 6... https://smpdl.sap-ag.de/~swdc/012002523100000108232005D/bw350_6-10001615.exe?_ACTION=DL_DIRECT
The patch 6 referred to above is for the BW3.50 Add-On - the SAPgui patch is typically a different number (the 11 that you mention is the SAPgui patch level).
Best regards,
Pat M.

Cant change color on visited sites without changing background /foreground colors that hide options on the sitec

I want to change the color of visited sites, but am forced to set background and foreground colors which don't properly
show all of the colors for controls etc on many websites.
I have to uncheck the button to Allow pages to choose their own colors....
Google is a good example after doing a search, then change visited sites color, uncheck the allow pages button and then you can't see the search button and most of the options in the top right corner in google.
I am a little color blind, so can't differentiate blue and purple for links on visited sites...
thx

I think the problem is that many sites use background colors to create buttons, so you lose that when you override the page's colors.
Maybe you could use an add-on to fine-tune colors instead of Firefox's all-or-nothing setting. I found a couple extensions that say they can change page colors, but I haven't tried them myself:
* [https://addons.mozilla.org/firefox/addon/color-that-site/ Color That Site!]
* [https://addons.mozilla.org/firefox/addon/colorific-1/ Colorific]
* [https://addons.mozilla.org/firefox/addon/toggledocumentcolors-198916/ ToggleDocumentColors_]
* [https://addons.mozilla.org/firefox/addon/color-toggle/ Color toggle]
For a truly custom approach to link colors, there are two general purpose ways to apply your own style rules to specific sites: the Stylish extension and a userContent.css files. You would need to set a preferred text ''and'' background color for visited and unvisited links so that you are guaranteed to be able to read the text.
Hope one of these fits the bill!

How do I change color on visited sites without causing websites to not view properly?

I go to Content/Colors, change color of visited sites, uncheck "allow pages to choose own colors instead of my selections above".
The visited sites change colors, but the websites that I go to do not view properly. They do not have names or headings or shopping carts or search boxes and are very hard to maneuver through.

You can use code in userContent.css or use the Stylish extension to override the page colors.
I use code like this:
<pre><nowiki>a:visited {color:#e08!important;background-color:#eee}
a:visited * {color:#e08!important;outline:1px dotted red!important;outline-offset:-1px}
a:visited img {background-color:transparent}
</nowiki></pre>
*Stylish: https://addons.mozilla.org/firefox/addon/stylish/
*http://userstyles.org/help/stylish_firefox
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration

Change Color in Spcolor File but Color Not Changed in Site - SP 2013

I have changed the color in the spcolor file that is associated with the theme selected for my site, but when I save it and upload it to the site again, the color does not change on the site. Is there another way colors can be changed that would override
the spcolor file?

Hi Tracey,
Please download the orginal spcolor file for particular composed look/theme from that site collection themem gallery, then change the color value with Notepad application, then upload it back to theme gallery to overrride spcolor file, check out and check
in this file, then see if the custom color could be changed for that particular composed look for your site, please try this in a test site collection firstly.
Also you can try creating a new custom composed look with custom spcolor for your site per the following articles, see if it could work.
http://www.learningsharepoint.com/2013/06/03/create-custom-theme-in-sharepoint-2013-step-by-step-tutorial/
http://bniaulin.wordpress.com/2012/12/16/step-by-step-create-a-sharepoint-2013-composed-look/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Visited links sometimes don't change color, sometimes do, at the same sites.

I am using Firefox 4.0.1 under Win XP. Under Options/Content/Colors, the color of unvisited links are blue and visited links are purple. However, when I visit a link by clicking on it, the link temporarily changes color but after I visit the link and return to the original page, "'''''sometimes'''''" the link has reverted to its original blue (the unvisited color), and "'''''sometimes'''''" the color becomes the color it should be -- purple for a visited link. Using IE, the color always changes as it should.

Thanks for the input. I tried that, and it didn't work. It appears to work for everything else - just not download links.
Here's an example of my links:
<a href="http://cdn.setxvideo.com/001.MTS" target="new">001.MTS</a>
in my header is
<style type="text/css">
a:link {background-color:#B2FF99;} /* unvisited link */
a:visited {
background-color:#FFFF85;} /* visited link */
a:hover {background-color:#FF704D;} /* mouse over link */
a:active {background-color:#FF704D;} /* selected link */
</style>
Again, they work correctly in FireFox but not Safari.

How to change color in table header

I have a table model like below I can change column colors (background or foreground ) but I couldn't change table headers color in my application . Basicly I want to change color of "Grup Adı","Kişi Sayısı" column headers.
Please help
thanks
class MyTableModel extends AbstractTableModel {
public String[] columnNames = {
"Grup Adı","Kişi Sayısı",
public int getColumnCount() {
return columnNames.length;
public int getRowCount() {
return data.length;
public String getColumnName(int col) {
return columnNames[col];
public Object getValueAt(int row, int col) {
return data[row][col];
public Class getColumnClass(int c) {
return getValueAt(0, c).getClass();
public boolean isCellEditable(int row, int col) {
return true;
public void setValueAt(Object value, int row, int col) {
if (DEBUG) {
System.out.println("Setting value at " + row + "," + col
+ " to " + value
+ " (an instance of "
+ value.getClass() + ")");
data[row][col] = value;
fireTableCellUpdated(row, col);
if (DEBUG) {
System.out.println("New value of data:");
printDebugData();
}

You have to implement a TableCellRenderer and affect it to your columns with:myTable.getColumnModel().getColumn(0).setHeaderRenderer(myTableCellRenderer);

Craigslist headers will not change color after clicking on it

When I browse craigslist and click on a header to view the ad, when i go back, i have no way of knowing that i already clicked on a link because the color does not change. I have searched on the internet for a remedy but am unable to find one!

This can happen because Craigslist opens the page in a frame, so you aren't visiting the page directly.
You could try to check that if you right-click the frame and use "This Frame > Open Frame in New Tab" to see if that affects the visit state

Why don't my hyperlinks change color?

My hyperlinks don't change color when I try them in a browser or on my iWeb site. They all work fine but I don"t get that satisfying color change. I am using iWeb 06. Do I have to upgrade to 08?

If it's not your taste it's unsatisfying and problematic to you which should be enough to justify a inquiry towards solution without option about what others think is unsatisfying or not to them.
You posted about iWeb '06 here's a solution for said version.
When you Publish from iWeb you get a .HTML file and a .CSS file for each page you've created. The CSS is the styles for each of your pages and the color of the hyperlinks is a style you want to change.
When you look at the CSS file opened in Text Edit it will have a section that looks like this:
a {
color: #453c3c;
text-decoration: underline;
a:visited {
color: #666666;
text-decoration: underline;
a:hover {
color: #000000;
text-decoration: underline;
You can change the alpha-numeric values for the regular, hover and visited behaviors of how the color changes for your links.
Hope that helps!

Visited links change color.

Visited links change color (to something pretty similar to
the page background :(
Even though in the page properties all the states of links
(Color, Rollover, Visited, and Active) are set to the same color -
yellow.
It is an upper part of a frame-set, but when I open it in a
browser or in DW by it self (without a frame-set), it still does
the same changing to that uncolled color. I really don't know what
to do with it.
Please help.
Anna

The decision to use frames should be based on a) your site's
needs, and b)
your willingness to accept the potential problems that frames
can create for
you as developer and maintainer of the site and for your
visitors as casual
users of the site.
I am down on frames because I believe that they create many
more problems
than they solve.
Judging from the posts here, and the kinds of problems that
are described,
the kind of person most likely to elect to use frames is also
the kind of
person most likely ill-prepared fo solve the ensuing problems
when they
arise. If you feel a) that you understand the problems and b)
that you are
prepared to handle them when they occur, and c) that you have
a need to use
frames, then by all means use them.
As far as I know, the most comprehensive discussions of
frames and their
potential problems can be found on these two links -
http://apptools.com/rants/framesevil.php
http://www.tjkdesign.com/articles/frames/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Anna2257" <[email protected]> wrote in
message
news:fmdm37$6mj$[email protected]..
> Visited links change color (to something pretty similar
to the page
> background
> :(
> Even though in the page properties all the states of
links (Color,
> Rollover,
> Visited, and Active) are set to the same color - yellow.
> It is an upper part of a frame-set, but when I open it
in a browser or in
> DW
> by it self (without a frame-set), it still does the same
changing to that
> uncolled color. I really don't know what to do with it.
> Please help.
> Anna
>

How to change color of selected label from list of labels?

My Problem is that I have a list of labels. RowHeaderRenderer is a row header renderer for Jtable which is rendering list items and (labels).getListTableHeader() is a method to get the list. When we click on the label this code is executed:
getListTableHeader().addMouseListener(new MouseAdapter()
public void mouseReleased(MouseEvent e)
if (e.getClickCount() >= 1)
int index = getListTableHeader().locationToIndex(e.getPoint());
try
if (((ae_AlertEventInfo)theAlerts.values().toArray()[index]).ackRequiredFlag)
AcknowledgeEvent ackEvent = new AcknowledgeEvent(
this, (ae_AlertEventInfo)theAlerts.values().toArray()[index]);
fireAcknowledgeEvent(ackEvent);
((HeaderListModel)listModel).setElementAt(ACK, index);
catch(Exception ex) {;}
Upon mouse click color of the label should be changed. For some period of time ie. Upto completion of fireAcknowledgeEvent(ackEvent);
This statement is calling this method:
public void handleAcknowledgeEvent(final AcknowledgeEvent event)
boolean ackOk = false;
int seqId = ((ae_AlertEventInfo)event.getAlertInfo()).sequenceId;
if (((ae_AlertEventInfo)event.getAlertInfo()).ackRequiredFlag)
try
// perform call to inform server about acknowledgement.
ackOk = serviceAdapter.acknowledge(seqId,
theLogicalPosition, theUserName);
catch(AdapterException aex)
Log.error(getClass(), "handleAcknowledgeEvent()",
"Error while calling serviceAdapter.acknowledge()", aex);
ExceptionHandler.handleException(aex);
else
// Acknowledge not required...
ackOk = true;
//theQueue.buttonAcknowledge.setEnabled(false);
final AlertEventQueue myQueue = theQueue;
if (ackOk)
Object popupObj = null;
synchronized (mutex)
if( hasBeenDismissed ) { return; }
// mark alert event as acknowledged (simply reset ack req flag)
ae_AlertEventInfo info;
Iterator i = theAlerts.values().iterator();
while (i.hasNext())
info = (ae_AlertEventInfo) i.next();
if (info.sequenceId == seqId)
// even if ack wasn't required, doesn't hurt to set it
// to false again. But it is important to prevent the
// audible from playing again.
info.ackRequiredFlag = false;
info.alreadyPlayed = true;
// internally uses the vector index so
// process the queue acknowledge update within
// the synchronize block.
final ae_AlertEventInfo myAlertEventInfo = event.getAlertInfo();
SwingUtilities.invokeLater(new Runnable()
public void run()
myQueue.acknowledge(myAlertEventInfo);
myQueue.updateAcknowledgeButtonState();
// here we should stop playing sound
// if it is playing for this alert.
int seqId1;
if (theTonePlayer != null)
seqId1 = theTonePlayer.getSequenceId();
if (seqId1 == seqId)
if (! theTonePlayer.isStopped())
theTonePlayer.stopPlaying();
theTonePlayer = null;
// get reference to popup to be dismissed...
// The dismiss must take place outside of
// the mutex... otherwise threads potentially
// hang (user hits "ok" and is waiting for the
// mutex which is currently held by processing
// for a "move to summary" transition message.
// if the "dismiss" call in the transition
// message were done within the mutex, it might
// hang on the dispose method because the popup
// is waiting for the mutex...
// So call popup.dismiss() outside the mutex
// in all cases.
if(event.getSource() instanceof AlertEventPopup)
popupObj = (AlertEventPopup)event.getSource();
else
popupObj = thePopups.get(event.getAlertInfo());
thePopups.remove(event.getAlertInfo());
SwingUtilities.invokeLater(new Runnable()
public void run()
// search vector elements to determine icon color in main frame
String color = getColor();
fireUpdateEvent(new UpdateEvent(this, blinking, color));
// Call dismiss outside of the mutex.
if (popupObj !=null)
if(popupObj instanceof AlertEventPopup)
((AlertEventPopup)popupObj).setModal(false);
((AlertEventPopup)popupObj).setVisible(false); // xyzzy
((AlertEventPopup)popupObj).dismiss();
else
// update feedback... ack failed
SwingUtilities.invokeLater(new Runnable()
public void run()
myQueue.setInformationMessage("Acknowledge failed to reach server... try again");
return;
Code for RowHeaderRenderer is:
class RowHeaderRenderer extends JLabel implements ListCellRenderer
JTable theTable = null;
ImageIcon image = null;
RowHeaderRenderer(JTable table)
image = new ImageIcon(AlertEventQueue.class.getResource("images" + "/" + "alert.gif"));
theTable = table;
JTableHeader header = table.getTableHeader();
setOpaque(true);
setHorizontalAlignment(LEFT);
setForeground(header.getForeground());
setBackground(header.getBackground());
setFont(header.getFont());
public Component getListCellRendererComponent( JList list, Object value,
int index, boolean isSelected, boolean cellHasFocus)
int level = 0;
try
level = Integer.parseInt(value.toString());
catch(Exception e)
level = 0;
if (((ae_AlertEventInfo)theAlerts.values().toArray()[index]).ackRequiredFlag)
setBorder(UIManager.getBorder("TableHeader.cellBorder"));
this.setHorizontalAlignment(JLabel.CENTER);
this.setVerticalAlignment(JLabel.CENTER);
setIcon(image);
else
setBorder(BorderFactory.createLineBorder(Color.gray));
setText("");
setIcon(null);
return this;
I tried but when i am clicking a particular label, the color of all labels in the List is being changed. So can you please assist me in changing color of only the label that is selected and the color must disappear after completion of Upto completion of fireAcknowledgeEvent(ackEvent);

im a bit confused with the post so hopefully this will help you, if not then let me know.
I think the problem is that in your renderer your saying
setBackground(header.getBackground());which is setting the backgound of the renderer rather than the selected item, please see an example below, I created a very simple program where it adds JLabels to a list and the renderer changes the colour of the selected item, please note the isSelected boolean.
Object "value" is the currentObject its rendering, obviously you may need to test if its a JLabel before casting it but for this example I kept it simple.
populating the list
public void populateList(){
        DefaultListModel model = new DefaultListModel();
        for (int i=0;i<10;i++){
            JLabel newLabel = new JLabel(String.valueOf(i));
            newLabel.setOpaque(true);
            model.addElement(newLabel);
        this.jListExample.setModel(model);
        this.jListExample.setCellRenderer(new RowHeaderRenderer());
    }the renderer
class RowHeaderRenderer extends JLabel implements ListCellRenderer
    JTable theTable = null;
    public Component getListCellRendererComponent(JList list, Object value,
                                                  int index, boolean isSelected, boolean cellHasFocus){
        JLabel aLabel = (JLabel)value;
        if (isSelected){
            aLabel.setBackground(Color.RED);
        }else{
            aLabel.setBackground(Color.GRAY);
        return aLabel;
}

Is it possible to change the URL of the browser corresponding to changes in the timeline?

Hello,
I'm trying to create a whole website in Edge. Is it possible to change the browser URL for different sections of the animation. For example me.com/part1 leads to 2.0 seconds in the animation. And for example when you type me.com/part2 the browser would go to 4th second of the animation. And vice versa, when the animation reaches the 4th second the browser URL would change to me.com/part2. It would be really great if that were possible. Any ideas on how to accomplish it?
Thanks!

Hi there, Joel's example seems to be exactly what you're trying to do. All you need to do is replace his functions with your functions.
There are two main parts to his example: 1) reacting to a URL change directly in the URL bar, 2) reacting to a button click, and setting the URL
Regarding Item 1: this line (this adds a listener for when the URL hash is changed, and calls the 'sym.animate' function in his example). Note that he is linking the value after the # with the symbol names 'panel1', etc. This line enables the functionality for you to be able to directly change the URL to: testStep95.html#panel2, and the site will change pages.
$(window).on("hashchange", function(){sym.animate(location.hash.replace("#",""), sym.onStage)});
Regarding Item 2: he's setting the page title (based on the active panel symbol) and URL hash, in the 'sym.animate' function. He calls the 'sym.animate' function on click of btn1, btn2, btn3:
document.title = panelIn;
window.location.hash = panelIn;
Props to Joel for his slick example!

Denote browsed sites by changing color of heading

Similar Messages

Maybe you are looking for