Deny install any application & Port scan
Hi I have CSAMC51. Could you please tell me how do I deny running of any exe file (any applications) and deny port scan and ping from a agent running on a host.
Looks like I can't edit my original question...
The problem is still happening, I've been doing some testing to narrow it down...
+ it's not just my computer (have also tried from my mums PowerPC and my sisters iMac), although it could be a mac thing (I don't have a windows machine to test from, only windows running on a mac, though I will give that a shot later)
+ it's not my internet connection (although it could be my ISP - I tested at my sisters place, who uses the same ISP as me, am looking for another testing location that has a different ISP)
+ it's not my website (have tried uploading to a completely unrelated website with similar results)
+ it's not cyberduck (have tried with filezilla, similar results, also tried via terminal - I don't know how to upload files, but when I connected, it connected through a different port, a 5 digit number, can't remember what now).
Not too sure where to go from here...
Similar Messages
-
I just upgraded to 10.7.3 and now I can't install any applications.
I just upgraded to 10.7.3 and now I can't install any applications. Everything else in the OS and in applications seems to work OK. After the installers ask for the system password, they do nothing. I doesn't hang; it just won't proceed any further in the install process. I can press the back button and it seems to do that just fine. I repaired the disk permissions, but to no avail.
After I installed 10.7.3, I tried to install an updater that was listed as being recommended for Time Machine users. That was the first time I tried to launch an installer of any sort and it did the same as above. I've gathered since then that the update wasn't necessary and was already included in the 10.7.3 I loaded today.
Any hints?I'm having a similar problem after installing 10.7.3 and the Messages beta. I've unistalled Mesages with little bit of trouble.. Linc, I followed the step given in your final post any help would be appreciated.
A screenshot of my actual error. I get this error not just for Flash, but also Handbrake. I receieve th error even when I try using a programs automatic update. However, not suprisingly I do not get the message when using Apple's software update.
Step 1 results
com.symantec.kext.internetSecurity (1.3.2f5)
com.symantec.kext.ips (3.2f8)
com.cisco.nke.ipsec (2.0.1)
com.symantec.kext.SymAPComm (11.1.2f17)
Step 2 results
org.macosforge.xquartz.privileged_startx
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon
com.symantec.sharedsettings
com.symantec.Sched501-2.plist
com.symantec.Sched501-1.plist
com.symantec.navapdaemonsl
com.symantec.navapd
com.symantec.MissedTasks.plist
com.symantec.diskMountNotify.plist
com.symantec.avscandaemon
com.micromat.TechToolProDaemon
com.google.keystone.daemon
com.bombich.ccc
Step 3 result
org.macosforge.xquartz.startx
com.symantec.uiagent.application
com.prosofteng.DGMonitor
com.micromat.TechToolProAgent
com.google.keystone.root.agent
com.google.Chrome.framework.service_process/Users/damian/Library/Application_Sup port/Google/Chrome
com.ecamm.printopia
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109
Step 4 result
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
Frameworks
NyxAudioAnalysis.framework
PluginManager.framework
R.framework
TSLicense.framework
cisco-vpnclient.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
.DS_Store
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
Silverlight.plugin
Unity Web Player.plugin
Unused
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.google.keystone.agent.plist
com.micromat.TechToolProAgent.plist
com.prosofteng.DGMonitor.plist
com.symantec.uiagent.application.plist
org.macosforge.xquartz.startx.plist
/Library/LaunchDaemons:
com.apple.remotepairtool.plist
com.bombich.ccc.plist
com.google.keystone.daemon.plist
com.micromat.TechToolProDaemon.plist
com.symantec.MissedTasks.plist
com.symantec.Sched501-1.plist
com.symantec.Sched501-2.plist
com.symantec.avscandaemon.plist
com.symantec.diskMountNotify.plist
com.symantec.navapd.plist
com.symantec.navapdaemonsl.plist
com.symantec.sharedsettings.plist
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon.plist
org.macosforge.xquartz.privileged_startx.plist
/Library/PreferencePanes:
Flash Player.prefPane
Flip4Mac WMV.prefPane
SymantecQuickMenu.prefPane
TechTool Protection.prefPane
/Library/PrivateFrameworks:
SymAVScan.framework
SymAppKitAdditions.framework
SymBase.framework
SymDaemon.framework
SymIPS.framework
SymIR.framework
SymInternetSecurity.framework
SymScheduler.framework
SymSharedSettings.framework
SymSubmission.framework
SymUIAgent.framework
SymUIAgentUI.framework
/Library/PrivilegedHelperTools:
com.bombich.ccc
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
Google Camera Adapter 0.component
Google Camera Adapter 1.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iWork.mdimporter
/Library/StartupItems:
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Google Earth Web Plug-in.plugin
WebEx.plugin
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.E9E876AD-F4B4-43BE-A4F2-EC7 33492E799.plist
com.ecamm.printopia.plist
com.google.Chrome.framework.plist
Library/PreferencePanes:
Printopia.prefPane
Step 5 result
AdobeResourceSynchronizer, iTunesHelper, Air Video Server -
Error in installing applications-Not able to install any applications
Hello,
I bought Blackberry Z3 on just 3 days back,
I am not able to install any Applications. (Example: Wikipedia, News, WhatsApp.. etc)
After download complete it is always showing " Error in installing application"
If i Check inside Myworld -? Active downloads,it is showing " utf8' codec can't decode bytes.
Please let me know how to resolve this problem.
Thanks,
Yogesh SI had the same problem what you had.
It would throw errors like, "Unable to decode...." or "Error installing the application"
I was neither able to download any applications from Blackberyy World nor sideload any android apps.
I use AirTel network.
Try removing the SIM card and install the application using Wi-Fi.
It worked for me smoothly when I did the above. -
Hi , I brought an I pad air 3 months ago. But recently I can't install any application and can't update any application. Even I can't install any free application. I can see one dialogue box about in red colors " there is a previous purchase problem please type your bank information correctly" . So I don't know what to do please help me. Thanks
The message implies that a previous purchase may not have been paid-for due to problems collecting the money from your account. Have you tried logging into your account and updating/changing your payment details (tap on your in Settings > iTunes & App Store on your iPad and tap 'view Apple id' on the popup and sign into it) ? Until there is an accepted payment method on your account (credit card, redeemed iTunes gift cards) and what you owe has been paid then you won't be able to download anything (including app updates).
-
I am using my iphone 4s here in dubai.Do i have to install any application to use siri..?? Coz i tried using them and i alwayz get ans which are not relevant.Please advise.
No Siri is preinstalled. Check you have enabled Siri correctly in Settings>General>Siri>ON and ensure you have completed the My Info correctly. Siri uses the information in your My Info which is taken from your contact card to respond. Also Siri is still in beta and currently uses limited languages i.e.
English (United States, United Kingdom, Australia)
French (France)
German (Germany)
Finally just check your restrictions in Settings>General>Restrictions>Siri>ON -
Not able to install any application
Hi,
I am not able to install any application on iphone through itunes.
When I select the application on itunes and trying to sync, the system shows the icon of the application on iphone but when I check that application on iphone it is not found.
Application status show "will install" in itunes.
Can any one please help me to know the issue.
Vineetyeah finally
Problem solved! , my tube is back to normal ( to rock )
all i did is , removed the sys,private,system,resources,data folders from the memory card , switched off my phone , removed the memory card , did a soft reset (*#7370#) and tried to install an application from downloads , i was able to install in the phone memory as memmory card was not inserted then switched off the phone , inserted the memory card and tried to install an application from the downloads, finally i was asked where to install the app. and gave memory card , viola application installed sucessfully
Regards,
evil_night13 -
I'm now at Sudan. I'm from Bangladesh. After coming Sudan I can't download/install any application from apps store. It shows error code-1009. Now what to do ? can anybody help me....?
Are you trying to download apps from the Sudan app store? If so, you have to have a valid credit card and billing address in the country of the app store to purchase from that app store.
Some countries also have restrictions on the apps and functions allowed in their countries. -
CC desktop says "You have not installed any applications yet"
I've previously installed Lightroom, Photoshop and Bridge, all working fine.
Today my CC desktop says YOUR APPS (0) - "You have not installed any applications yet".
I've tried logging out of CC desktoop app and loggin in again.
Tried loggin out of CC desktop, deleting OPM.db file and logging in again. Both unsuccessful.
The applications run fine.
Running Windows 7 Pro 64
How can I rectify this please.
Thanks
StuartFound part of the problem.
I had changed the language to English International in the CC desktop application. Changing language from international to north american allowed me to see all the apps.
However I only see Photoshop and Bridge installed. I also have lightroom installed, but it does not show in my list of installed apps. -
Unable to install any applications after updating ...
Hi guys!
I updating software my mobile n78 to version date 10-3-2009
custom version
21.002.051.1
custom version date
18-02.2009
After that if I try to install any application the mobile is say the file is corrupted
I need to help
Solved!
Go to Solution.thanks for help me
-
i can't install any application on my ipod. it needs a higher sofware version. how to upgrade it's software to 4.3? i have 2.1
khristianfromaparri wrote:
i can't install any application on my ipod. it needs a higher sofware version. how to upgrade it's software to 4.3? i have 2.1
You won't be able to update to 4.3. Depending on which version you have, you may be able to upgrade to 4.2.1. Check out the Apple articles below for info.
http://support.apple.com/kb/HT1353
http://support.apple.com/kb/HT2052
Stedman -
I can't install any application to my 6120 c
I can't install any .jar neither .sis to my phone
it starts installing and then stops and says "unable to install".
I turned all security checks off but the problem is still there !!
any suggestions ?khristianfromaparri wrote:
i can't install any application on my ipod. it needs a higher sofware version. how to upgrade it's software to 4.3? i have 2.1
You won't be able to update to 4.3. Depending on which version you have, you may be able to upgrade to 4.2.1. Check out the Apple articles below for info.
http://support.apple.com/kb/HT1353
http://support.apple.com/kb/HT2052
Stedman -
I can't install any application
I can't install any application from App store directly to Iphone using 3G, it's downloading it but after the loading process is complete, the apps won't open when I tap it, instead, it will start loading/downloading again. (The blue loading indicator doesn't appear/progress but it say's loading then it will stop loading and the name of the apps will appear as if it's already installed but the loading indicator is still empty. When I tap it, it will start all over again in loading/downloading process.)
If I check it in store - it says, downloaded, but the application is still not opening, the loading indicator still empty but it says the app name already as if its like downloaded already, but when you tap the icon, it will start again sayin, "LOADING" but the blue indicator doesn't fill the empty bar. .
What do you think bro? should I just restore factory settings? wew. . too bad. -
Cannot install any application from new Winows market.
Cannot install any application from new Winows market. I click "Install" and... that's all... nothing more...
P.S. I am on domain network.Hi and welcome to Apple Discussions.
Don't worry, no special etiquette, we're all friends here
What was the software that you installed that claims to "enhance the speed of your system"? The logical thing to do would be to uninstall the application and hope that it hasn't caused wider ranging problems. The SW, if only halfway reputable, should have come with uninstall instructions. Follow the instructions, reboot and see if your download problem is fixed.
WRT to the slowing down that prompted your (misguided) installation of this SW there are many things that may be the culprit but the most common and easiest to fix is the remaining space on your HD. What size is your HD and how much free space is there? This info can be obtained by selecting your HD and keying Command (Apple) + I (the letter 'eye').
Post back with the SW concerned and the remaining space and we can take it from there.
Good luck,
Adrian -
hey! i can not install any application on my iphone. this happen suddenly!! i don't know what had happened ??
What happens when you try to install an application?
-
there any way to know where my ipad, because it was stolen? and do not use iCloud? besides not remember if you have installed any applications to track it?
If you did not set up Find My iPad, then there is no way to track it. Contact the police and change any passwords for any online accounts you may have used from your iPad (the iTunes Store, for instance).
Regards.
Maybe you are looking for
-
After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?
-
I have a HP pavilion laptop which I got only 2 months ago. Last week it wouldn't turn, i have turned a few different things like unplugged the power, took out the battery, held down the power button, and still nothing happens. the light comes on the
-
PDF export to word not working, conversion shows text as code.
I am working with Adobe acrobat pro, and cannot seem to export my PDf file without the text resulting in incomprehensible code. The images in the PDf convert beautifully, however. I have followed the directions listed on the website, and have enable
-
How to create a Connection to UDB Database through OIM APIs.?
Hi, In our OIM (9.1.0.2) implementation, there is a need to connect to a UDB database to execute some select queries and get the data. Is there any way in which I can do this? I tried creating an ITResource to have all static database related informa
-
Burned DVD looks like it only has one field
I have down converted 1080i HDV material to 480i using compressor. The m2v files look fine in the simulator in DVDSP (4.1.0). However when I burn a DVD and play it back, it looks like it is only showing one field. The text is jagged, and you can see