Deny production order release if component has no storage location

Hi,
when a production order is created, I want to deny the release if there is a component without a storage location.
I looked at the PPCO* user exits, but I haven't found a suitable one yet.
Could anyone help me?
Thanks,
Matthias

Any ideas?

Similar Messages

Production Orders without material - component reservations in APO

Hi All,
We are using transaction CO07 to create a production order without material. We have four materials in the BOM for this production order. One is an input product and three are output products. My intention is to have the components on this BOM show up in APO as reservations or something else that will be considered in our planning.
At this point I am not able to see anything in APO system (e.g order reservations) like I would with a regular production order with material. Does anyone have any experience with this functionality or know if it is supported by SAP?
Thank you,
Paul

Hi Paul,
It is an interesting case, a don't know if you have solved it. Anyway, here is my suggestion -
1) If you want to see a reservation in APO for a component, you need to make sure that the header product exists in APO as well, and the production order for this header has also been CIFed over to APO. This is the first check.
2) If the first check is OK, then you should check that all the 3 header products exist in APO (In your case, you have 3 three header products). And then, the production order appears for all the 3 products in product view.
With the above checks, I am certain, you should see the reservation for the component, else it is an ieal OSS candidate.
Thanks,
Prashant Ghule

How to install Order Release Management component

Hi All,
I am running APPS R12. I want to install Order Release management component. Can any one help me how to install this component individually.
Regards
Nadir Pervez.

Check the following thread, and follow the steps outlined there. Instead of AX module, search for the product/module which you want to add:
Add AX module to my system
Re: add AX module to my system

Preview and print a printout in production order release

Iu2019m using CO02 to release and save the production order. Currently u201Cbatch cardu201D printout is automatically printed in production order release. I want to change this to preview the printout before printout is send to the printer. Can someone tell me the configuration for this.

Hi
Pls refer this link
layout adjustement in production order- suitable to printout sheet
Print Preview of Production Order
layout adjustement in production order- suitable to printout sheet
Thanks
S.Murali

Unique serial number during production order release for FG materials

Hi,
Actually our client is asking for serial number generation for each FG material during its production order release.
So that with this serial number he can track it in shop floor plus after dispatching to customer.
Here the scenario is Make To Order, this serial number will also be considered by SD during dispatch.
For serial number creation, I referred documents from SAP best practices(help.sap.com).
After this, now I am able to create serial number for specific material automatically.
Currently I am getting serial number with respect to material specific, i.e., serial number generating with respect to FG codes. Ex:- FG1 - 1, 2, 3, 4 and FG2 - 1, 2, 3, 4.
But as per my client requirement, they want serial number without material specific, i.e., common serial number for all FG codes.
Ex:- Sr No- 1-FG1, 2-FG1, 3-FG2, 4-FG1 - - - - according to production order releasing sequence.
Plz inform if any settings are to be made.
Thank you in advance.

Hi Arman,
I Had got solution for how to track which FG is linked to which SFG sr no, just go through the below link it also gives how to use COIB transaction.
COIB transaction usage, how to track which FG is linked to which SFG sr no
But still I had not got solution for
how to assign common serial number for all FG codes automatically
Ex:- Sr No- 1 -> FG1,
2 -> FG1,
3 -> FG2,
4 -> FG1
- - - - according to production order releasing sequence.
Whether is it automatic serial number assignment is possible or not.
Plz inform if any settings are to be made.
Thank you in advance.

Serial number during production order release

Hi,
Currently I am getting serial number with respect to material specific, i.e., serial number generating with respect to FG codes. Ex:- FG1 - 1, 2, 3, 4 and FG2 - 1, 2, 3, 4.
But as per my client requirement, they want serial number without material specific, i.e., common serial number for all FG codes.
Ex:- Sr No- 1-FG1, 2-FG1, 3-FG2, 4-FG1    - - according to production order releasing sequence.
Plz inform if any settings are to be made.
Thanks,
regards,
B C Gudageri

Thanks Glenn Larson,
This is the first time for me for creating serial number for FG materials.
Actually our client is asking for serial number generation for each FG material during its production order release.
So that with this serial number he can track it in shop floor plus after dispatching to customer.
Here the scenario is Make To Order. So this serial number will also be considered by SD during dispatch.
For serial number creation, I referred documents from SAP best practices(help.sap.com).
After this, now I am able to create serial number for specific material types automatically.
But here the condition is client wants serial number should not be specific to material codes but should be common throughout the plant for all FG codes.
Ex:- Sr No- 1 for FG1,
                   2 for FG2,
                   3 for FG2,
                   4 for FG3
- according to production order releasing sequence.
Me dont know about Presort and IMB serial numbers.
Please tell me the appropriate approach I can make or any of links which I can refer.
Regards,
B C Gudageri

Production order release

Dear Experts
Good Afternoon
I have small query regarding production order release when ever i try to release a production order system give following message
System status WCRE is active (ACT 20030197 0010) and system status of work center is CRTD WCRE
I can't able to find the clue how to release the sale order
Kindy guide me
Valuable answer will be rewarded
Regards
Rajeev Garg

Hi,
Pls. check for your Work Center Status in CR02 / CR03 -
> Extras -
> Administrative Data -
> Status.
Check whether it is locked or not. If work center is locked , unlock your work center from
Extras Menu--->Status--> Lock / Unlock.
Hope this may help you.
Regards,
Tejas

MRP - production order release

Hi experts,
I am new in SAP PP
currently when run the MRP, it will generate planned orders and PR's. it will calculated planned order sub compoents requirement qty also.
but i want to change settings for once convert planned order to production order once release after only need to create sub compoent PR's and planned order
pls explain what change need to do?
Regards,
Elango

Hi
This is not possible,because planning and production order releasing is two different activity.When ur release production order thats mean ur giving green signal for manufacturing or start manufacturing and when ur release the production order ur work center or capacity is get booked against that production order. So at the time of production order release if u want to plan the child item then u have to procure ur child item then u have start manufacturing so complete time ur capacity is showing as loaded then ur not able plan for other production order.

Production order release Material Availability check

Gurus,
I have a production problem where the order can be released when the component for the order is in a restricted status. This is not allowed by the batch search strategy.
<u>Here's Problem Description:</u>
When running on version 4.6C, I have a work order created. I release the work order successfully. However there is a component that has an invalid material/batch according to the batch search strategy The material availability check shows all components available.
However, I remove the batch and the batch can not be entered because it is not correct according to the batch search strategy. I try and release and the material is added to the missing parts list.
I change the component so that it can be used.
Put the batch number back in the order.
Save the order.
Change the component material/batch so that it is no longer valid.
The order will release and it shouldn't because the material/batch is not valid.
<u>I've looked at the following transactions and master data:</u>
OPL8 - Order Type - Dependent Parameters Overview for my plant and order type and the check batch box is checked.
MM03 - Material Master MRP 2 view for the component to get the availability check
OVZ2 - Availability check control
OPJK - Order Control to get the checking rule for order release
OPJJ - Availability check control details with availability check and the checking rule for order release - I did not see anything here that would influence the checking based on if the batch was entered or not.
I did double check the batch search strategy for production order - COB3. Everything looks OK there.
Does anyone have any other places to check? I must be missing something. I tried OSS - there weren't any notes that I could find.
Thank you!
Michelle

Hi,
Check in order control opjk for order type pp01
Batch assignment /release material
Release despite missing batches
no release if batches are missing
Regards,
nandha

Production order release with batch management

Dear All
Our company are going to use batch managment. But someone told us the production order cannot be released if the component with batch managment is missing (requirment is lower than stock). Is that true?

Dear,
It depend upon the setting means if you want to automatic batch determination in production order for component then system will not allow to release if no batches are available.
This setting come from MRP 2 view batch entry if you keep it blank then system will allow you to release the order with missing batch quantity also.
Please try and come back if any issue.
Regards,
R.Brahmankar

Error during Production Order release

Hi Experts,
When I am releasing one production order follwoing messege appearing.
Error during availability check for order xxxxx (see log)
co02>goto> logs--> release
Date 22000504 lies after the end of the valid factory calendar (please correct).
I have checked routing, pv, bom etc. availability check indicator 02 is alreadly maintained in mm03. Earlier we have confirmed several order of this material in the past, now suddenly this error is appearing.
Kindly help me to solve this problem.
Regards
GR

Hi,
Chk for following :
01. Timings in Routings/Factory calender
02. Chk for all components in order . It may be possible that one of component is having some MRP elelment dated beyond factory calender
03. Also chk all receipt /issue elements with dates .
Regards,
Milind.

Disable certain changes in sales order after production order release

We are in the MTO scenario and are also using variant configuration. The business requirement is that after a production order has been released (REL status) the preceding sales order item should be “locked” for certain changes. Such changes would include VC and some other fields (e.g. quantity and dates). Some minor changes like texts should still be allowed.
The best idea we could come up with is to put some validation in the sales order user exits, but there are some disadvantages. It seems kind of strange though that there would be no such functionality in standard SAP (e.g. some changes in the order can’t be made after a delivery has been created). Is there by chance anything in the configuration that we missed?
I found this old thread, but it still seems to require user exits. Unfortunately couldn't find anything specifically on the production order / SO integration.
Thank you!

Hi Jelena,
Try in the userexit MV45AFZZ
(form userexit_field_modification)
Example:
select * from afpo where kdauf = vbap-vbeln
and   kdpos = vbap-posnr.
if sy-subrc = 0.
select single * from aufk where aufnr = afpo-aufnr.
if aufk-loekz = ' '.
select single * from jest where objnr = aufk-objnr
and   stat = 'I0002''
and   inact = ' '.
if sy-subrc = 0.
screen-input = 0'.
endif.
endif
endif.
endselect.
.H.Terras

Create production order with "bespoke" component list

Hi
I am investigating how I can create a production order which has to use a 'bespoke' component list, i.e., I don't want to use the BOM application. The scenario is that an external solution comes up with the 'best' component list and SAP doesn't have that information.
Obviously I can use the dreaded BDC / call transaction on CO01, but could I use something nicer?
I have ticked off my list so far:
a) the userexits and Badis won't allow direct manipulation of RESB, it's only import parameter...
b) I looked up the POI (function module CLOI_CHANGE_UPL_31), but it diesn't allow updates to the component list.
c) Also the BAPI_PRODORD_CREATE/CHANGE doesn't allow updates to the components.
d) Is there a convenient enhancement spot anyone knows of which could be used (e.g. in FuGr COMK?)
My best option might be this one, does anyone have experience?
e) The function module BAPI_ALM_ORDER_MAINTAIN was developed for CS/PM orders. Does it work for PP orders?
Appreciate any help on this!
BJ

I'm also trying to add a component in a PP order but the Bapi return the message "Method SAVE is not provided for object COMPONENT"; I'm investigating

User exit for Production Order release

Hi Experts,
Any User eixt for Prouction Order Mass processing.
Before releasing the production order i have to do some checks. Can you please provide right user exit. More reward points with best solutions.
Thanks
Cris

Hi,
check the following userexits and BADI's for Production Order
Enhancement/ Business Add-in Description
Enhancement
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determinati
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines
PPCO0009 Enhancement in goods movements for prod. process order
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
Business Add-in
AFABD_CHANGE Change Relationship
CAUFVD_CHANGE BAdI: Overall Network Scheduling with Selection
PPPI_SEL_ORD_EXT_REL
SIDAT_UPDATE Change date of price simulation
Regards

Mtl Availability Problem @ Production Order Release

Hello All,
For production order creation and order release we have different types of availability checks:
1: Order creation: check all purchase orders (ZP02)
2: Order release: do not take purchase orders into account (ZV02)
In the material master the field "availability check" is always set to 02.
The problem with this is that as soon as we want to release a production order, the future purchase orders are not taken into account, but the corresponding production orders (created ones) are. This yields missing parts at release, even though there is enough in stock.
The following options are now selected for ZV02:
[ ] incl. purchase orders
[ ] incl. purchase reqs
[V] incl. dependent reqs
[V] incl. reservations
[V] incl. sales reqmts
[V] incl. deliveries
[ ] incl. ship notific.
incl depend reservat [x] all
incl rel order reqs [ ] do not check
incl planned orders [ ] do not check
incl production orders [x] all
I tried changing OPPJ. Things that do not work or are unwanted are:
changing ZP02 identical to ZV02, since purchase orders should be included for orders in the future
changing ZV02 identical to ZP02, since purchase orders confirmed to today might be delivered tomorrow, which would yield missing parts.
changing ZV02, incl. Production orders from [x] to [F]. Still missing parts @ release.
Thanks in advance.
Regards,
Marc

Hello
I assume here that 02 is for the component in the production order, am I right ?
All components have the material availability at 02, so you are right.
Now in 02-ZV02 , the you are considering all the reqmts coming from planned or production orders, is that right ?
Yes, both planned and production orders are checked in ZV02 and ZP02.
Is ZP02 working according to what you need ?
ZP02 is used @ order creation. This works fine, because it takes purchase orders into account that are confirmed in the future. This is correct at order creation.
Cna you check the differences between both rules ?
Purchase orders are not taken into account for ZV02
Purchase orders are taken into account for ZP02.
The rest is identical to the previous list
An example:
Day 0 (current stock): 200 of material X
Day 1: Production order requires 200 material X
Day 2: Purchase order is confirmed for 200 material X
Day 3: Production order requires 200 material X
Result of ZP02: in stock: 200, required 200 + 200, confirmed @ day 2: 200 --> No missing Part
Result of ZV02: in stock: 200, required 200 + 200 --> Missing Part
The best solution would be for the system not to look at the requirements of the orders in the future which are not released yet. Therefore I changed the key ZV02: incl. Production orders from [x] to [F]. However, this did not have any effect!
Regards,
marc.

Deny production order release if component has no storage location

Similar Messages

Maybe you are looking for