Deos Aironet 1300 can provide the repeater mode to PT-link TL-WA601G

Hello,
I have a problem with Aironet 1300 to provide the repeater mode to PT-link TL-WA601G for extending the signal.
I have two cisco aironet, i have configures as the bridge to link each other and WEP 128bit key.
Then i bought TL-WA601G for extending the signal to my room. However after i configure on TL-WA601G as the repeater mode and put WEP 128bit key, TL-WA601G cannot get sent and received packets from Aironet.
So what is the problem on this? How can i solve this issues?

Cisco Aironet products can establish 40-bit Wired Equivalent Privacy (WEP) connections with IEEE 802.11b-compliant non-Cisco products. If you want to create a 128-bit WEP link, Cisco products only interact with other Cisco products. If you are using a third-party device with a Cisco Aironet product, you must set both devices to use 40-bit WEP.

Similar Messages

I want to learn about workflow any one can provide the guidence for me

i want to learn about workflow any one can provide the guidance for me

SAP Business Workflow can be used to define business processes that are not yet mapped in the R/3 System. These may be simple release or approval procedures, or more complex business processes such as creating a material master and the associated coordination of the departments involved. SAP Business Workflow is particularly suitable for situations in which work processes have to be run through repeatedly, or situations in which the business process requires the involvement of a large number of agents in a specific sequence.
Features
SAP Business Workflow provides a number of tools for defining and analyzing workflows as well as for monitoring operation.
The Workflow Builder is for displaying and making changes to workflows. You can make small extensions directly to the original workflows supplied by SAP, such as carrying out your own agent assignments or changing deadline monitoring.
There are several Workflow Wizards to support you in the definition of workflows, with which you can create specific parts of a workflow. The Workflow Wizard Explorer gives you an overview of the existing Workflow Wizards.
In order to make the functions of the R/3 Systems available to a workflow, you use business objects, which you can define and analyze in the Business Object Builder. These business objects are made available to the workflow in reusable tasks. The Business Wizard Explorer gives you an overview of all existing tasks.
You can also use SAP Business Workflow to respond to errors and exceptions in other, existing business processes. You can start a workflow when predefined events occur, for example an event can be triggered if particular errors are found during an automatic check.
Please follow the links,
http://help.sap.com/saphelp_nw04s/helpdata/en/04/926f8546f311d189470000e829fbbd/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/c5/e4a930453d11d189430000e829fbbd/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a1/172437130e0d09e10000009b38f839/frameset.htm
A good tutorial
http://www.thespot4sap.com/articles/Invoice_Verification_Automation_Using_SAP_Workflow.asp
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
http://www.sap-img.com/workflow/sap-workflow.htm
/people/alan.rickayzen/blog
/people/jocelyn.dart/blog/2006/06/19/why-use-abap-oo-with-workflow
a good book
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Check the following PDF
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
Regards,
Sai

Is there any way can stop the automatic mode channel?

Hi Expert,
I wanna confirm if there are anyways can make the automation mode channel to be stopped, excepting stop the channel in
the "Runtime Wrokbench" of the Browser by manual.
I expect the manner as using the Http Request to stop the channel.
Is there any way?
( I consider maybe the way using Http request to stop the automation mode channel is not viable. cause I got the error msg describe as follows:
The channel "GSCMDRECEIVERBJ/XIF_JAVA/APS2GSCMDBJ_RECEIVER_CC (GUID 9c094a53361438e6947efba69a4c7715)" is configured to use an automation mode not compatible with the type of the current principal (WSUSER). The channel was not started. Change the channels automation mode and repeat the administrative action. )
Thx in advances.
Brian

Hi Brian
Check this blog " Control Communication Channels Externally without using RWB "
/people/william.li/blog/2007/05/04/control-communication-channels-externally-without-using-rwb
I guess it might help you
Regards
Harish

My latest pano photo have missing landscape. Some of the photos are merged into one. I can provide the examples. What could cause this problem on a new 5C?

My latest pano photo have missing landscape. Some of the photos are merged into one. I can provide the examples. What could cause this problem on a new 5C?

Thanks for the input. I was finally able to find some test conditions that duplicated the problem, and it is either that or some other out-of-spec diffraction distortion. So I sent it off for repair.

Can OEM Grid Control(12c) can provide the KPIs trend reports/analysis?

Hi experts:
Can EM cloud Control(12c) can provide the following trend reports/analysis for Report Servers(11gFMW report service)?
average response times
current job load
job load
failed job ratio
current jobs
etc.
If EM cloud control (12c) have not the indicators , Can we progmram to realize the above indicators and save the indicators to EM cloud control database?
If we can do programming to monitor the indicatiors, Is there any development documents to reference?
Thanks
Regards
Edward

Any update?
Thanks

How I can access the recovery mode in my Toshiba laptop

Hello,
I want to know how I can enter the recovery mode in my Toshiba laptop A105
I lost the recovery CD, do I need to purchase it or download it !
Please help
Solved!
Go to Solution.

Satellite A105-S2081
If you can locate a Windows XP installation CD (and a valid product key for activation), you can install it yourself and then add all the drivers and utilities here.
Otherwise, you're better off ordering recovery discs from a third-party. That will include preinstalled drivers and utilities, and Windows will be already activated.
   Digitalmedia-labs.com
   Recovery-Disks.com
   MyRecoveryCDs.com
   Recovery-CD.com
   RestoreDisks.com
   RestoreCD4u
-Jerry

"Keychain can provide the password so you don't have to type it"?, "Keychain can provide the password so you don't have to type it"?

Hi, all,
I quote from the Keychain Access Help: "Keychain can provide the password so you dont have to type it" .
Please tell me:
How does this work?
What do I have to do to make this work on my MacBook Air, OS X Lion? I mean what do I have to open, click, enter etc..
I will be very grateful. I have the greatest difficulty in remembering the several passwords I use, and it would be a boon if the OS would do this for me.
If I have been too ambitious about the properties of OS X Lion, is there a third party program which can do this for me?
roystonfrombrighton

Mario_MM, thank you,
But what I need and do not yet see, is:
when a box appears with , say, an ID on top and a blank box below asking me to fill in the password - I do not want to have to type in the password, I want the password to already be in there, in text, or even in a line of dots, and then these entries to be accepted.
Sorry to keep on about this, but your help would be appreciated.
roystonfrombrighton

Lightroom 5 defaulted to my Trial version. Can you please advise on what I did wrong? I can provide the serial number for the purchased subscription.

History - I had a 30 day trial version of Lightroom back in October. One small catalog of 1500 photos were contained in it. When I was prompted to upgrade, I incorrectly selected the option to "choose a different catalog" which prevented me from seeing my recent photos in Lightroom 5. It appears that my version of Lightroom may be a trial version instead of the version for my subscription purchase. Can you please help me with this? I will be glad to provide the serial number as necessary.

Without proper system info and other details nobody can tell you anything. for the time being, try another browser...
Mylenium

I lost my tool bar on top. I no longer can see the Bookmarks, Tools, or Help links. Where are they and how can I reset them? I had them at first but now I don't see them.

I lost the tool bar on top. I can no longer see the Bookmarks, Tools, or Help links. I had them in when I began with your browser but now they're gone. How do I restore the default toolbar?

* In Firefox 3.6 versions on Windows and Firefox 4 on Windows and Linux it's possible to hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu of a toolbar.
* Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
* Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also:
* [[Menu bar is missing]]
* http://kb.mozillazine.org/Toolbar_customization

What other V$ view than V$SESSION can provide the "program" column ?

Hi all,
We get a blank value , no value then, given by the "program" column of the V£SESSION view when our after logon database trigger fires. This is perhaps because we use a forms R6i application which uses a 8.0.6 version of oracle client.
So I want to know which other V$ view can be joined with the V$SESSION view to get the program column.
Thank you very much indeed

Modifying the sqlnet.ora has 0 to do with the issue at hand.
Face it:
if the client executable doesn't have provisions to expose the program name,
you will never see it in v$session.
Your problem is you want to remain in the Stone Age, where the CD rom didn't exist and records where played by birds.
Sybrand Bakker
Senior Oracle DBA

Can see the site if I use link visit

After publishing the site I can see it if I click visit... but if I type the name of website www.imagesofnormandy.com into say google it comes up as a mac error....what is going wrong? I'm now 4 hours trying to get this resolved!! Short of remaking the whole site I don't know what to do... thank you

You probably need to go to the place where you have your personal name and make sure that it still has the correct info about where to point it.
It should probably be pointed at:
http://web.mac.com/normandybeaches
By the way, you have probably chosen the worst possible name to give your site inside the iweb app (http%3A_web.mac.com_normandybeaches_www.imagesofnormandy.comhome.html). If I were you, I would change this to something short and simple like "ion", republish, and reupload.

What can be the error in this simple Linked List Implementation

i have a linked list code that wont compile successfully. The code is
//Lets try the Linked List
import java.util.*;
class LinkedListDemo {
public static void main ( String args[]){
     LinkedList l1=new LinkedList();
     l1.add( "A");
     l1.add(2);
     l1.add(3);
     l1.add(4);
     l1.add(5);
     l1.addFirst(6);
     l1.add(7);
     l1.add(8);
     l1.add(9);
     //Lets check what does the Linked List hold at this time
     System.out.println("Prsently the linked lis is having: "+l1);
}Problem is with the add method . Compiler error is that it doesnt recognize the symbol ie add method.

i m sorry , java version is 1.4In that case, read up on the link jverd posted on AutoBoxing. You can only add Objects to a List. An int is a primitive, not an Object. You can try something like this:
l1.add(new Integer(2));

Link Colors: Here you can change the default colors for Web links. Click on the color samples to select colors.

This worked before, but, since I reinstalled my pc, it doesn't.
Why is this & what must I do for it to work. ?

Try using this add-on: https://addons.mozilla.org/en-US/firefox/addon/color-toggle/

I can't find the "Repeat" button in my Itunes.

I can't find the "Repeat" button in my Itunes, when I'm listenning to a music. I have reinstaled my Itunes, it didn't help.

You can access the repeat options if you right-click on the shuffle icon, or if menus are enabled you can use
Controls > Repeat > Off | All | One.
Once the control is visible you can click it to switch between states as before. If the control is turned to off it disappears on the next track change. In contrast the shuffle control remains visible whenever it is appropriate. Hopefully the next release will fix this.
tt2

TS3999 How can I customize the repeats in a calendar event?

How do I customize the repeat mode in Calendar?

The are limited options when adding an event to the built-in calendar, as shown on the Repeat field when setting up an event. If you want to create more complex recurrances you'll have to use a different calendar app that supports this, such as Week Calendar (https://itunes.apple.com/us/app/week-calendar-easy-powerful/id381059732?mt=8).

Deos Aironet 1300 can provide the repeater mode to PT-link TL-WA601G

Similar Messages

Maybe you are looking for