Dep area 02 is already closed for the year 2007

Dear all,
Thx for all your ans, but still my problem is not yet solved, as i tried doing AJRW,and AJAB,  still its showing same error.

Hello
Pls check the settings of period control which are applicable and also the fiscal year variant attributes.
Reg
*assign points if useful

Similar Messages

  • I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even h

    I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even had upgraded to the Mavericks . I do not think it's fair to have to pay again and I would like to upgrade my operating system without having to pay again for the same system.

    Hi anatuta, 
    Thanks for visiting Apple Support Communities. 
    It sounds like you are trying to upgrade your Mac to a newer version of OS X, after completing a fresh install of Snow Leopard. 
    If you have already purchased and downloaded OS X Lion and Mavericks, you should be able to find these items in the Purchased section of the Mac App Store. 
    You may find the steps in this article helpful with finding the items:
    Mac App Store: Finding your purchased apps - Apple Support
    If you do not see the items in the Purchased section, they may be hidden:
    Hide and unhide purchases in the Mac App Store - Apple Support
    All the best,
    Jeremy 

  • Message: Stocks already exist for the sales order

    Hi Gurus,
    I am trying to change the material valuation class in MM02. I am getting an error Stocks already exist for the sales order. Even though there exists no stock. SAP note suggests to make this error message as warning message. Could you pls help me to know the message class and number?
    Thanks
    Shashi

    Jürgen,
    Yes, you are right. SAP, unfortunately does not tell that stock does not exists in current or previous period. As I consultant, I have assured that there exists no stock in current and previous period. However, I am not sure, still why this message is thrown. Its checked in MD04 that nothing is assigned to material and in MMBE no stock exists. We shall take care of this Sales order that it is not used after changing the valuation class but now I need to know what is the message class and number for that error. Suggestions would be much appreciated.
    Shash

  • Assets upload for the year 2008 which alredy closed

    HI Experts,
    I have a intresting concept which i want share you.
    Problem: My clients want to upload some assets values in the local books to the fisical year 2008 which alredy closed.
    For this i have tried through AS92(LSMW) but all assets are uploaded in the fisical year 2010(current year).
    How to open the year and how to upload the assets for the year 2008.
    Please guide me in this case.
    Thanks&Regards,
    Dude

    Hi Dude,
    generally you have to open the fiscal year in FI-AA and FI and upload the assets with AS91 (AS92 is for changigs).
    I strongly would recometn you to contact your local consulter.
    regards Bernhard

  • Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?

    Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?

    D.p.middleton the Adobe Application Manager has been available for quite some time.  It not only allows Creative Cloud users to install their applications but also downloads and applies applicable updates.  In addition it is also responsible for the licensing and managing your agreement to the terms and conditions of the EULA.
    2. this could be due to you selecting a trial subscription to the Creative Cloud?  If you go to one of the Adobe Creative products and select Help>Updates it will launch the update portion of the Adobe Application Manager which I believe is the portion you are looking for?
    #3 I believe this was already mostly covered in the answer to #2.
    #4 the Adobe Application Manager also receives periodic updates which affects both perpetual and Creative Cloud subscription users.
    I hope this provides you many of the answers you are looking for?  If not please feel free to respond back with any additional inquiries which you have.  Also if you are experiencing any difficulties with the update process please post this as well.  It may not be necessary to have a full understanding of the inner workings of the Adobe Application Manager to help you resolve your difficulties.

  • SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

    I have a simple column chart grouping on 1 value on the category axis.  For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis.  I right click on the data series and choose "Add calculated series...".  I choose moving average.  I want to move the average over at least 2 periods.
    When I run the report, I get the error "Formula error - there are not enough data points for the period".  The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5).  When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
    I don't think this is entirely acceptable for our end users.  At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart.  Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
    Thank you,
    Dan

    I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
    If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
    <ChartFormulaParameter Name="Period">
                      <Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
    </ChartFormulaParameter>
    What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
    A side note:
    If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

  • Before I updated my iPod I had all of the songs to an album that I bought on iTunes. After I updated my iPod I only have 5 of those songs from the album. I would like to know how I can get the rest of the songs cause I already paid for the album and I wen

    Before I updated my iPod I had all of the songs to an album that I bought on iTunes. After I updated my iPod I only have 5 of those songs from the album. I would like to know how I can get the rest of the songs cause I already paid for the album and I went on my computer and it said that I have to pay for them even though I already paid for the whole album. So what do I do?

    Sync with the same computer iTunes that you normally sync with.

  • What are Apple doing to compensate for the damage caused by the iPhone 4 bumper?

    I have noticed damage caused by the bumper.
    It is NOT foreign object but caused by the hard plastic on the inside of the bumper
    (plese do not come out with rubbish like steel is harder than plastic) I am not stupid and I know that the damage matches the pattern of the bumper skeleton.
    What I want to know is when are Apple going to deal with this and replace my phone?
    I dare not go to the so called Genius bar in Milton Keynes as they have adopted a Dixons style "fob off" attitude and I will become rather angry with them.

    Re: What are Apple doing to compensate for the damage caused by the iPhone 4 bumper? 
    15-Jun-2011 15:15 (in response to sfrommilton keynes)
    o Steel is harder than plastic, so the bumper has not caused the damage.
      - You call it rubbish
      - The world calls it physics
    You are totally wrong.  Please go back to School.
    o You can deny physics
      - but that will not change reality.
    You can go to School but that wont change reality.
    o Your description of your Genius bar is incomprehensible
      - I recommend you go to the Genius bar leaving the chip on your shoulder at home and tactfully explain what you think is your issue.
    I recomend you find a day job ans stop TROLLING peoples threads.
      - I've never had them fail me or be the least bit confrontational.
      - But if you act like a jerk then I couldn't predict what would happen
    Yeah because you were there.  Are you having some kind of relationship with the company?  I think you sleep with an Apple under your pillow.
    Finally I am a consumer who has paid for a product that is not living up to expectations.  The plastic skelton is hard and abrasive (I know what that means as I went to School) Abrasion's are marking the product. 
    This is not the only time this has been reported and as such I have no issue with particles entering the bumber.  This has happened from the start (when I used Apples stupid bumber case)
    Please don't patronise or TROLL others threads.
    <Edited by Host>

  • Getting error while Year end closing in asset accounting for the year ...

    Hi,
        i am getting error while doing Year end closing in asset accounting for the year 2004. It is giving few assets and saying that "Depreciation not posted completely"
    Can any body help in this reagards.
    With regards,

    Dear Shree,
    Do u have the list of all such assets for which no depreciation has been posted. If yes, then go to AFAB, upload the list all these assets & then select the radio button as 'repeat'.
    This will post you depreciation for all the assets. then close the year.
    regards,
    Ajay

  • [svn] 1384: Splitting DefineFont into the various DefineFont 1, 2, 3, etc SWF tag formats but retaining a common base DefineFont class so that embedded fonts are still retained as symbols for the SWF dictionary no matter what version of the SWF tag is us

    Revision: 1384
    Author: [email protected]
    Date: 2008-04-24 07:54:58 -0700 (Thu, 24 Apr 2008)
    Log Message:
    Splitting DefineFont into the various DefineFont 1, 2, 3, etc SWF tag formats but retaining a common base DefineFont class so that embedded fonts are still retained as symbols for the SWF dictionary no matter what version of the SWF tag is used.
    Also improving [Embed] so that it can recognize .TTC files as assets (previously these were only recognized through CSS @font-face rules).
    QE: Yes, please add a test case for using [Embed] to embed fonts from a TTC file in addition to our tests for @font-face. Note that the AFEFontManager must be configured for this scenario.
    Doc: No
    Checkintests: Pass
    Mxunit: AtEmbed Font suite: Pass
    Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/media/AbstractTranscoder.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/media/FontTranscoder.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/MimeMappings.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/CachedFontManager.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/Dictionary.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/MovieEncoder.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagDecoder.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagEncoder.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagHandler.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagValues.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/builder/tags/FontBuilder.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFontAlignZones.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFontInfo.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tools/SwfxPrinter.java
    Added Paths:
    flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/DefineFont3Face.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont1.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont2.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont3.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont4.java
    Removed Paths:
    flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/DefineFontFace.java

    Running the script by python2 solves it for me:
    su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
    Best regards,
    Cedric

  • How do I deauthorize a lost computer when I've already used my 'Deauthorize All' for the year?

    Hi there.
    I have been working for months now trying to find a solution on how to deauthorize every computer I have used for my Ipod touch (every computer I have used has been mine, of course). But I've run into an issue: every computer I've authorized (5 total) have been either killed (hard drive died), or reformatted. Thus, now I can no longer go into the computer and 'deauthorize' the computer manually.
    As I mentioned above, I've already used my deauthorize all for the year and will not be able to use it again until Febuary 23, 2013.
    I cannot wait this long to reaccess my account just so I can save my files & back them up! Please, someone, I need some advice!
    What can I do to reaccess my account and deathorize them all again? Is there any process? I do it!
    I just want to be able to use my accounts again and back up my Ipod whenever I want!
    Sincerely,
    Adam

    Open iTunes, select iTunes Store from the sidebar, click on the Support link under Quick Links. Post an email explaining the situation to seek assistance.

  • Exactly what IPod's are being received as replacement for the recalled 1st generation

    Exactly what IPod's are being received as replacements for the recalled 1st generation one's

    6th Generation Silver Nano 8GB

  • Any chance you guys are working on vector support for the next update?

    Any chance you guys are working on vector support for the next update? It would definitely make working with these retina displays much easier.

    While waiting, there's this manual solution i proposed here : http://fr32c.free.fr/Am/index.php?post/2013/09/12/Muse-Inline-SVG but you'll have to translate the article. At the bottom are some files to test.
    And i demoed it : http://fr32c.free.fr/Muse/Muse+inlineSVG/

  • When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

    When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

    Thanks David. I had to convert the mts file to Quick Time (using AunSoft Conversion software) before I could import it into Final Cut Express. And I made sure I kept the size of movie (720 X 480 with letterbox) to compliment what I set my Panaconic AVCCAM video recorder at (720/60). Even after I fully render it, it still looks fuzzy in the Canvas window at the right that plays what I have editing down in the Timeline. A friend that edits some using Final Cut Pro helped me to narrow things down to this problem. This is also wierd. If my Viewer window at the left is set to 200% to get the person's head the same size in the Canvas window at the right we needed to put it to 400%. Does this make any sense. We think we need to control the Time line resolution somehow but cannot find any options from my manual, or the help, or in the various drop down menus. Do you have any clue? What is going on?

  • [svn] 2093: fix air-config. xml so that there are no hard-coded values for the build number.

    Revision: 2093
    Author: [email protected]
    Date: 2008-06-16 12:57:18 -0700 (Mon, 16 Jun 2008)
    Log Message:
    fix air-config.xml so that there are no hard-coded values for the build number. This gets updated from the root build.xml by using a combination of a value from build.properties, release.version, and a value passed into build.xml build.number.
    partial fix for sdk-15812
    Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-15812
    Modified Paths:
    flex/sdk/branches/3.0.x/frameworks/air-config.xml

    I need to add just one more thing and that is on battery life.  Last night I sat with the rMBP on my lap installing software, surfing the web, answering emails for close to 4 and 1/2 hours.  At the point I took it back to the charger it still was showing a computed battery time remaining of 3.5 hours.
    Today I had two VMs open and took the machine of the charger and sat outside with my dogs for about 30 minutes.  During this time I was working in both VMs, editing and compiling code.  My battery life estimate showed a good solid 4 hours. 
    This is roughly 6 times greater than what I had with my 2010 MBP and it too had a SSD.  I am not sure why but this retina MBP just seems to not work as hard doing anything that caused my 2010 MBP to struggle.
    While the battery life is certainly better than I expected it is clear that load can change that very rapidly. So I think I still need to visit clients with an external battery or charger in hand.  But I don't think I will be quite so scared that my laptop will simply run out of power before I can even get it plugged in.

Maybe you are looking for