Dep area and ledger group

Hi,
When I am saving some changes in my chart of depreciation, I receive an error for two areas 60 and 64.
"Depreciation area 64 posts to ledger group L6 with leading ledger
Message no. ACC_AA030
Diagnosis
The non-leading depreciation area 64 is assigned to ledger group L6. However, this ledger group contains the leading ledger. A depreciation area that does not post online must always be assigned to a ledger group that does not contain the leading ledger or none at all.
Procedure
Change the assignment for depreciation area 64."
I do not know how to continue.
The depreciation areas 60, 62 and 64 are assigned to ledger group L6
Thanks in anticipation
BR
Satya

hi,
remove the leding ledegr OL from ledger group L6.
This should solve the issue, i guess
Raghav

Similar Messages

  • Accounting Principles and Ledger Groups

    Dear All,
    I have just discovered that for a previous project in my current Client that 3 of the ledger groups were never assigned an Accounting Principle.
    Based on this SAP will post to these sub-ledgers based on the Accounting Principe assigned to the 0L Leading Ledger.  Since all post via "GAAP" based principles will there be any impact on now creating new Accounting Principles for these ledgers/ledger groups?
    The missing details relate to India GAAP and China GAAP.  Assets posting seems to be OK based on the existing postings, but only the foreign currency valuation is missing as it was never done between the valuation area and the accounting principle were never assigned!!
    Any opinions?
    Regards
    Waza

    But by assigning the ledger group previously created to the new accounting principle will this then have any issues in our postings?
    Obviously we will do the testing, especially for assets, etc.
    Regards
    Waza

  • Define depereciation area - OADB (LEDGER GROUP)

    Hi all,
    I set ledger group in OADB (LDGRP_LP) for area 01.
    01 - BRL (FIAA= 0L and 0V)
    Than when I carry out t-code AB01, the document displayed to:
    0L
    75 19304 _________________1.000,00
    40 55000__________________1.000,00
    0T
    75 19304 _________________1.000,00
    40 55000__________________1.000,00
    0V
    75 19304 _________________1.000,00
    40 55000__________________1.000,00
    If I set a ledger group (FIAA = 0L and 0V) for area 01, Why didn't account for two ledgers?????
    Thanks!!!

    Hi,
    You have to take into account that when posting an "Acquisitions" to an asset, this Acquisition goes to ALL ledgers in asset accounting. The ledgers assigned to the depreciation areas are used for depreciation postings. That is why you can see when posting AFAB that the postings are done according to these ledgers and the Acquisition goes to BOTH ledgers 0L (leading ledger) and L2 (non-leading ledger) in my example below.    
    A typical parallel ledger scenario customizing should look as follows:.      
    For Example:
    AREA     TEXT                       POST TO GL                                     LEDGER        
    01           Local  GAAP           1 (Real time)                                            0L          
    05           ABC                       3 (Depreciation only)                                 L2          
    XY          DELTA AREA          5 or 6 (APC only or Only APC directly)       L2                                                                               
    With this setting you assure that postings to L2 are only the ones that you would expect in a parallel ledger scenario.                                                                               
    I hope this helps further to clarify.
    Kind regards,
    Brigitte

  • Dep. area and table T093A

    I want to know which setting can modify table T093A, there is field  called Identy acq. value, i want to remove check indicator for one of my depreciation area, but  i try OADB, OADC, there is nothing to do with table T093A, so anyone knows the Configuration transaction related to T093A? thanks

    Hi Tiang/Atif,
    Please check transaction OABC which allows changing identical acquisiton value indicator.
    Thanks!!!
    Murlidhar Khatri

  • Difference between both Book Dep area 01 and tax dep area 15 ?

    Can i know the dep. key & precentage  will be same for both Book Dep area 01 and tax dep area 15 ?
    If both  are same than What is the  need to create 15 dep area?
    Normally For income tax purpouse dep. area 5 are using is 01 is a same % than no need to creation 15 is it right or wrong?
    normally what company will do for book of accounts and the tax purpouse the 01 dep. area and dep15 area?
    Please adivse me with one example.
    thanks in advance
    srinu. cac

    Hi,
    Different deprecistion areas are used for making it possible for the company to manage different views on their accounting reports made on the assets. All the definitions of depreciation areas (number, rules, perecentage) should be done due to the business requirements - there is no rule for this.
    Regards,
    Eli

  • Country specific Dep Area

    Hi All,
    If there are two depreciation areas say 01 and 10 and 01 dep. area is my Book Dep area and 10 dep area is my country dep area.
    So now when i run the dep posting, should the dep be posted to both the dep areas.
    I am aware of how to configure this technically, but i need to understand the process - how do we post the dep in the country specific dep area.
    Thanks and regards,
    Ankur

    Hi
    As SAP only one depreciation area can be real (posting) and other depreciation area are normally for reporting purpose. But, we ca have a derived depreciation area which is deemed as real depreciation are which can be posted.
    Like
    Dep - 01
    Dep - 10
    Derived depreciation is suppose 51 which (DA-01 less DA-10)
    In this case you can deem depreciation area 51 as country specific depreciation area.
    Thanks
    Colin thomas

  • How to post a acquisition entry in Dep area 30 (for Non Leading ledger)

    How to post a acquisition entry in Dep area 30 (for Non Leading ledger N1)
    In our scenario, following configuring is being set up:
    1 Book depreciation IAS/IFRS 1 0L
    30 LOCAL 3 N1
    51 Property Tax 0
    60 DELTA 6 N1

    Hi Saurabh,
    Create a new custom transaction type by coping existing TTYPE 100 and restrict the transaction type which allow posting for dep.area 30 and do posting in FB01L by selecting ledger group.
    Regards,
    Mukthar

  • Booking of accruals and deferrals in ledger group not possible

    HI all
    when Booking of accruals and deferrals in ledger group BL is not booking for 2 documents.
    error msg: posting to gl accounts with open item management is not possible.
    pls give some inputs why accruals and deferrals are not posting.

    Hi
    You may refer below documentation where sap allow open item clearing and Posting Specific to Ledger Groups.
    http://help.sap.com/erp2005_ehp_04/helpdata/en/46/f6f4957a7569b5e10000000a114a6b/frameset.htm
    SAP KBA: 1898300 -FSS0 - Deactivation Clearing Specific to Ledger Groups
    To use ledger group-specific clearing for any GL account, you need to select this option while setting up GL account master data. By setting up this indicator, you can manage the GL account on an open item basis as well as post Ledger group-specific entries to the GL account
    Regards
    Jomon

  • Sales office and sales group are not copied from quotation to sales order

    Hi All,
    I have maintained sales office and sales group in quotation maually at header level.while  coping to sales order sales office and sales group are missing.
    Please let me know what would be reason for missing those twoand whether i should check anything in copy controls.
    Regards
    Mohan

    As its a standard functionality to have the Sales Group & Sales Office from Quotation to Order. But in your case, check the Copy Control settings at Header Level .
    DataT 051 General header data       Copying requirements 001 Header-same customer
    DataT 101 Header business data
    DataT 001 Partner header
    In case , they are also same, then check if any Logic is added in the Existing Routine.
    Best Regards,
    Ankur

  • How do I ungroup the pages in my doc, I need to move the first to the end, and it shows me all the pages are in a group

    On Pages:  I need to move the first page of my document to the end, and it shows me all the pages are in a group.  How do I ungroup the pages in my doc. 

    Hello there, linafrompereira.
    The following portion of the online Pages Help for Mac provides information on grouping items in Pages:
    Layer, group, and lock objects - Pages Help for Mac
    http://help.apple.com/pages/mac/5.2/#/tan5eab46568
    Group and ungroup objects
    Shift-click to select multiple objects.
    In the Arrange pane of the Format inspector, click Group (or choose Arrange > Group from the Arrange menu at the top of your computer screen).
    To ungroup an object, select it, then click Ungroup or choose Arrange > Ungroup.
    Tip: You can Control-click objects, then choose Group or Ungroup from the shortcut menu. You can also add these buttons to the toolbar: Group and Ungroup.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • StoreFront : Payment and Shipping group relationships are missing for some orders

    Hi Team,
    In our application, we are able to see relationship between payment and shipping group for some orders. But we are not able to find these relationships for some orders.
    We are verifying in "dcspp_payship_rel" table. We are wondering why this behavior is happening for some orders.
    Could you please suggest to move further ?
    Regards,
    Babji...

    Hello.
    First of all you must ensure that you are properly using transactions when you create/update the orders.
    There are best practices to update the orders in ATG that must be followed to avoid loss of information.
    Like this steps below:
    Acquire a write lock using the ATG lock manager.
    Start the transaction.
    Synchronized on the Order object.
    Update the Order.
    End the synchronization.
    End the transaction.
    Release the lock.
    Here are some links that should help you understand the steps to be followed to make a correct update of an order:
    https://atgoasis.wordpress.com/2014/08/28/best-practices-for-updating-an-order-in-atg-commerce-applications/
    http://www.digitalsanctuary.com/tech-blog/java/atg/design-pattern-for-updating-an-atg-order.html
    http://sumangalavijay.blogspot.com.br/2011/10/atg-update-order.html
    Oracle ATG Web Commerce - Managing Transactions in Oracle ATG Web Commerce
    Hope it helps you! =)

  • What are field symbols and field groups.?

    hi,
    What are field symbols and field groups.? what is the usage of  "component idx of structure" clause with field groups?
    regards

    sorry, question resolved.

  • What are field symbols and field groups.? Have you used "component idx of s

    What are field symbols and field groups.? Have you used "component idx of structure"

    Field Symbols and field groups
    Field Groups / Extracts
    http://help.sap.com/saphelp_46c/helpdata/EN/9f/db9ede35c111d1829f0000e829fbfe/frameset.htm
    Field Symbols
    http://help.sap.com/saphelp_46c/helpdata/EN/fc/eb387a358411d1829f0000e829fbfe/frameset.htm
    Field symbols: are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
    Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
    Field Groups:
    A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
    Use
    The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
    When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
    A field group combines several existing fields together under one name
    like
    FIELD-GROUPS: fg.
    then you can use one insert statement to insert values in fields of field-group.
    INSERT f1 f2 ... INTO fg.
    Field symbols
    If u have experience with 'C', then understand this to be similar to a pointer.
    It is used to reference another variable dynamically. So this field symbol will simply point to some other variable. and this pointer can be changed at runtime.
    FIELD-SYMBOLS <FS>.
    DATA FIELD VALUE 'X'.
    ASSIGN FIELD TO <FS>.
    WRITE <FS>.
    Field symbols: are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
    Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
    Field Groups:
    A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
    Use
    The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
    When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
    Field Groups / Extracts
    http://help.sap.com/saphelp_46c/helpdata/EN/9f/db9ede35c111d1829f0000e829fbfe/frameset.htm
    Field Symbols
    http://help.sap.com/saphelp_46c/helpdata/EN/fc/eb387a358411d1829f0000e829fbfe/frameset.htm

  • Update Ledger group in BKPF at the time of MIGO and MIRO

    Hi Friends,
    In our current implementation we have requirement to update a certain Ledger group, to restrict the postings in all ledgers, at the time of positng in MIGO and MIRO.
    Can you please let me know how we do this.
    Waiting for your reply,
    Madan Mohan

    Hi Santhosh,
    Thanks for your reply. But in the substitutions at header and line item level i didnt find the 'U300' userexit.
    Can you suggest me at what level i can find that user exit.
    Thanks and Regards,
    Madan

  • Often when Firefox is closed and reopened ALL the tabs and tab groups are missising. FIX!!!!

    For reasons that are unclear to me I sometimes close Firefox and later re-open it. In some cases ALL the tabs and tab groups are gone. Today it opened in MSN.com and ALL tabs were gone. I put a lot of pages on these and have NO WAY to find them all again. If this continues and you cannot give me a way to recall them I simply will have to go to another browser. It always happens when I need them most and don't have time to even track down one. It completely upsets my day, week, month whatever!!!.
    Is there a way to get them back? Someone asked a similar question and was never given a useful answer.

    I've begun having this problem as well. Reviewing the above, I seen no errors that I' making. A few weeks ago, without being aware of an update to Firefox, it began behaving differently than it has for years. I've always had it set to open to an empty tab, now it often opens to the 'Firefox Home Page' (which I've never used)... this despite resetting my opening page to "Show my windows and tabs from last time" (upon troubleshooting the 'home page issue' I found that the opening page had reset to FF Home somehow. I store a lot of pages in tab groups and having them disappear is a major bummer since they're news articles I'm waiting to copy.
    Also... I run CCleaner weekly and I know that will erase the group tabs I've stored so before running it I have to store those URL's another way. Does anyone know what I can uncheck in CCleaner to keep those tabs?
    Thanks.

Maybe you are looking for