DEP error after installing itunes 10.5
I have updated my laptop running Windows XP Home Edition with all the latest Microsoft updates and then updated itunes to 10.5 so that I could update my ipad 2 to ios5. After updating itunes, I cannot open the software. It gives me the data execution prevention box saying that itunes cannot be opened. I click on the details and it gives me event type: BEX for itunes.exe. I have researched everywhere on the web and tried everything suggested and still get the same error. I have now uninstalled itunes 10.5 and found an old itunes 9.4 that I installed. I get an error opening saying that some windows components are not compatible and run the appleitunes.bat file to register dlls. That didn't help. I am at my wits' end!!!! What is causing this error? If I completely turn off DEP, I get an error that the progam cannot be opened and each time it gives me a different dll file in the details. Does anyone at Apple or other know a fix for this?
Same problem here!
Similar Messages
-
Svchost.exe errors after installing iTunes 7.0.1.8
I have two computers that starting throwing svchost.exe errors immediately after installing iTunes 7. First it happened on my desktop. In preparation to reinstall Windows XP on my desktop, I prepared my laptop to use while my desktop was out of commision. I installed iTunes 7 and immediately I started getting svchost.exe errors. I don't have the blaster worm on either machine (already checked). My desktop is behind three firewals, runs Norton, and I already did a full virus scan on both.
This is causing significant problems as my computer can't see the network, outlook can wig out, and in general my machine is unpredicatable. I hate to think that installing iTunes 7.0 leads to the need to reinstall Windows. If anyone has any ideas I would appreciate any help.I changed my "Startup Type" for "Terminal Services" from "Disabled" to "Manual". Resolved issue.
http://docs.info.apple.com/article.html?artnum=304434
Windows XP Pro -
Windows error after installing itunes 8.0.2.20.
I' ve a problem after installing Itunes 8.0.2.20.
When i try to use Itunes i get the message windows with a log and use of itunes is broken.Might have been a bad cable. I reinstalled. Got a crash again. Tried a different cable. It worked.
-
Error after install iTunes setup: Apple application Support was not found
Hello,
I am trying to install iTunes on my pc. During the downloading of iTunes setup.exe i get this error:
Something went wrong during the installation of this item. Microsoft. VC80.CRT, type="win32", version="8.0.5072.7.6195", publicKeyToken="lfrc8b3b9a1e18e3b",process or Architecture=x86"
I choose 'ok' and the download continues. When the download is complete and i try to open the iTunes setup its given the error saying:
Apple Application Support was not found
Apple Application Support is required to run iTunesHelper. Please uninstall iTunes then install iTunes again.
I tried this more than once, but its not working. I also tried to extract the iTunes setup.exe with winrar and then to do an install with appleapplicationsupport.msi, but its given the same error.
Anyone please has some advice?
Thanks in advance!
MariekeWhen I look at my control panel the only program that shows is "I Tunes". No other supporting programs are showing up in the control panel nor the Common Files nor in the Program Files (x86).
That's an extreme case of this.
We'll try doing standalone installations of all the supporting programs.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone Apple Mobile Device Support install.
Doubleclick the AppleSoftwareUpdate.msi to do a standalone Apple Software Update install.
Doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.
Do those four installs go through okay? If so, does your iTunes launch without any errors now? -
Apple pls fix this - MS Visual C++ Runtime error after installing itune 9.1
Ever since I upgraded itune to the latest version 9.1, I kept getting the error messasge below when I start up the computer. Tried restoring system to a previous date, and uninstalling & installing itune a couple times to no avail. Any idea what's going on and how to fix this? I had to remove itune to be able to use my computer (ugh). The irony is that the itune upgrade was mainly to enable ipad. Now that I have my ipad I can't use itune.
The error message reads:
'MS Visual C++ Runtime Error' - 'Runtime Error'
This application has requested the Runtime to terminate in an unusual way. Please contact the support team for further assistnace.Some people have reported that Apple Software Update can cause this error, so you might try removing that and see if it helps. Removing that utility should not affect iTunes, though you won't get automatic updates (you can just download any new version of iTunes or QuickTime manually and install it). It would, however, be wise to make a backup of any purchased content or items that would otherwise be difficult to replace, just in case something goes wrong during the removal.
-
Audio Configuration error after installing iTunes 7.1.1
STEPS:
1. Launch previous version of iTunes, verify application opens.
2. Agree to upgrade to latest version of iTunes.
3. After installation, restart PC and launch application.
EXPECTED RESULT:
iTunes 7.1.1 launches
ACTUAL RESULT:
iTunes does not launch; error "iTunes cannot be run because it has detected a problem with your audio configuration" is generated.
NOTES:
I changed nothing between when I last launched iTunes and when I upgraded to the new version. This error message is quite vague - does anyone have any clue what it means? Thanks.that's typically caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
the following document may be of some assistance:
iTunes 7 for Windows: iTunes had detected an audio configuration problem -
Unknown error after install itunes 8 and starting Genius
I can no longer connect with my AirTunes. Each time I try I get an "unknown error (-3256)" message.
Tried restarting and reconfiguring, no go.
Anyone else experiencing similar difficulty?I am having the exact same problem. I checked what version of Airpot Utility I am using and it is 6.3.
I checked for any updates and there was one for Front Row. The update said it would fix problems with ITunes also. But still no luck.
Can anyone help?
Thanks -
Getting a reistry error after installing telling me to reinstall itunes
I am getting a registry error after installing iTunes and tells me that the drivers and data associated with importing CDS or Burning CDs cannot be recoginized and to reinstall Itunes... I have done this about five times now and have removed my computer of all traces of iTunes and am still getting this error. if someone could help it would be greatly apperciated.
Thanks,I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
after instaling itunes 10.5 i cant open itunes , my pc says its an error . . what do i do ?
In order to download iTunes 10.7, which requires OS X 10.6.8, you have to buy OS X 10.6. It's available from the online Apple store, in the US by calling 800-MY-APPLE, or online here. After OS X 10.6 installation, run Software Update until there are no more updates available, at which point you'll be at OS X 10.6.8 and can install iTunes 10.7.
-
ITunes Error 7 (Windows error 127) after installing iTunes 64-bit for Windows
After installing iTunes 64-bit for Windows (latest build), I get an error pop-up saying:
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I've gone thru the uninstall, reboot and reinstall process three or four times now. Still nothing.
Furthermore, after clicking okay to the error, it continues to pop up on it's own every 45 seconds or so.
There was one other error I came across after trying to launch iTunes after installation.
See both error messages here:
http://screencast.com/t/DSg4PpKF5BeXBrilliant. Thanks a lot. I've wasted a couple of hours on this nasty bug, & trying all the other suggestions across various threads again and again.
I now find I had the same registry entry hanging on, despite uninstalling & wiping everything again and again. Having now deleted this key, (I don't even have an iPod), & iTunes 11.1.14 now opens at long last.
But WHY is this bug not fixed? Enough people are suffering with this across the forum. WHERE is Apple support on this?
It should have been added to their page at
http://support.apple.com/kb/HT1923
by now, why hasn't it???
It's not good enough!
Re:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDlls]
"C:\\Program Files\\iPod\\bin\\iPodService.exe"=dword:80000000
AHA! This entry for iPodService.exe still exhisted. So I had no folders on the PC, no installs on the PC and no services running.... BUT this was still in the Registry.
Step 5 - Delete only the Registry entry above. NO REBOOT
Step 6 - Reinstall iTunes64.exe -
After installing itunes 10 installation was successful but then tells me error 2 (windows error 2).
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
After installing itunes on my pc i get an error that says that i have to uninstall and reinstall itunes. I finally got it to down load and now it says that I need an upgrade. It's getting very frustrating as I've never had this kind of trouble.
What is the precise wording of the message that is appearing?
What OS is on the computer? -
TS3258 error 42404 after installing iTunes 10.6
I'm getting the above error after installation. Now itunes won't recognize my ipod. What do I do?
After installing itunes 10.6, system does not connect to itunes, it kepps on saying "Accessing itunes store".
I'd start with the following document with that one:
Apple software on Windows: May see performance issues and blank iTunes Store -
ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???
Jennifer...
Follow the instructions here > iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
After installing itunes it says it encountered errors as it couldnt be configured, need help asap please
I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.
Maybe you are looking for
-
GUI_UPLOAD Throws dp_out_of_memory
Hi togehter, while i'm trying to upload an huge txt file with the method cl_gui_frontend_services=>gui_upload i'm getting an errorcode back with 14: dp_out_of_memory. Curiosly sometimes it works. Can somebody please explain this? Thansk and regards P
-
I actually don't care other than the fact that it isn't the way it should operate and everything else seems to behave. However, the I-beam pointer is hard to see and can disappear. It seems to happen mostly in Safari and then carry over to other appl
-
How to change the values of Map Region Column "REGION_NAME"
Hi guys, To correspond with the values in my "CITY" column, I have to change the values of Region_name column in the map.. region_name column contains the name of the territories in English but City column in my table contains the names of the territ
-
Last question Regarding the Artwork
I have saved various jpegs bitmaps and Gifs to my C: Drive pictures Folder to go along with each different podcasts. I just want to know here where can I put them in my F: Drive and how can or if I can automatically make them come up in the Artwork s
-
Processing local entries. is this code safe?
Hi, I have the case where I'd like to apply a processing to the only entries in a given node of Coherence (trying to use a strategy as described in User Guide ( [query by server|http://coherence.oracle.com/display/COH35UG/Query+the+Cache] )). I wonde