Dep run problem
hi
i did dep run,background job was schedule in program then i gone to job over view
and excuted message displaying SM37" no jobg scheduled" what is the problem
guna
hi
yes job scheduled with name rapost2000 then i went to sm37,while executing "no jobs"
guna
Similar Messages
-
Hi all,
when i am running the dep. The depreciation is not calucluated correctly in Asset a class for Prior Year Assets
Example 1
Asset Number 4036196
Capitalised date 30.04.2004
Depreciation Key Z095 (Year 1 = 50%, Year 2 = 35%, Year 3 = 15%)
Total Depreciation Posted 56879.34 ( = 15%)
Depreciation that should have been posted 379192.34 ( = 100% as Capitalised date is greater than 3 years)
Example 2
Asset Number 4036208
Capitalised date 30.04.2005
Depreciation Key Z095 (Year 1 = 50%, Year 2 = 35%, Year 3 = 15%)
Total Depreciation Posted 41657.37 ( = 15%)
Depreciation that should have been posted 277715.37 ( = 100% as Capitalised date is 3 years old in 2007)
Example 3
Asset Number 4036221
Capitalised date 30.04.2006
Depreciation Key Z095 (Year 1 = 50%, Year 2 = 35%, Year 3 = 15%)
Total Depreciation Posted 35000.00 ( = 35%)
Depreciation that should have been posted 85000.00 ( = 85% as Capitalised date is 2 years old in 2007)
We are using the straight line method.
as in multi level method i select the following parameters
(acqusiton year) (year) (per) (basevalue) (percentage)(reduct)
9999 1 0 01 50 0
9999 2 0 01 35 0
9999 999 0 01 15 0
can you tell me what exactly is the problem is. in dep key or in any where else.
its urgent because year end closing is near please help....
Thanks.Hi
No issue go to AFAB select the repeat Run Radio button and execute the Dep run in Background all the previously posted depreciation documents if posted with errors will get reversed and new documents will get posted.
Also read the below message from SAP on Repeat Run
Restart depreciation posting run
Indicator for depreciation posting with restart option.
Depreciation posting is performed in several steps and at each step the system logs the current status. If the program is terminated during a posting run for various reasons, then the program has to be started again in the restart mode to clear the data base of possible inconsistencies.
A restart run should therefore only be performed in certain cases and cannot be started in a test mode.
Good Luck
Hari -
hi
have created a asst code then a sub asset code for it
then i made a po and gr was done
now i can see the depreciation values in aw01n
but when i do the test run for the dep run in afab
no data was found in the print (just title)
what might be the problem
regards
rajHi,
do you see the depreciation in the Asset Explorer in the "planned values" tab only or are there simulated period values in the lower part of the "posted values" tab also? Only if you see calculated period values there, you can expect the depreciation run to post something.
Another reason could be that you execute an online test run without specification of the asset number. Maybe my reply in thread [repeat asset depreciation posting run (t-code AFAB) |repeat asset depreciation posting run (t-code AFAB); could apply to this current problem also.
Regards,
Markus -
Afeter dep run no documents are genareted
Hi experts
pls solve my problem .
FSV : 2007-2008
now my requirement is
asset acquired and captured on 04-03-2008
i need to do dep run for the month of march 2007-2008 financial year
i did't do any dep run previously for any asset, this is first dep run for financial year 2007-2008 ,
just i acquired one asset on 04-03-2008,
But i do dep run AFAB , no errors and no documents r genareted.
Y happened like this, wt is solution
ok,
get points
Thanks
geetaDear Geeta,
Pls check the depreciation run log in AFBP for the concerned period. Please check for error message, if any.
Please let us know if the AFAB is executed with test run. In case you have executed AFAB without test run and there is an error, the system updates the table ANLP but no reference document is generated. This can be seen in AFBP.
Please assign points, if helpful. -
HI Guru's,
I migrated Asset as at 31.07.2008 using with AS91
Capitilazation date is 9.11.2006
Cost of the asset 17871.00
Accum. Dep 1299.42 upto 31.08.2008
Current Year dep: 1299.59
ord dep. 288.76 from 01.04.2008 to 31.07.2008
using with OASV posted values cost of asset and accum dep.
using with fb01 posted values for ord dep.. i want dep run dep run for period 05. its showiing error
You cannot post depreciation in the period specified, as this will miss out a posting period.
System Response
No posting can be made in this period.
Procedure
According to the posting cycle, you should post period 001 next. Either enter period 001, which corresponds to the posting cycle, or request an unplanned posting run explicitly for this parameter.
how is solve this
regards
JKHi JK,
the message in the depreciation run provides the solution already. You shall execute an unplanned depreciation run if you need to post period 5 as next period. The regular procedure would be to post a planned run for period 1, then a planned for period 2 and so on until period 5 is the next period to be posted.
But as you have the option "unplanned" depreciation run on the selection screen you sould use this function and skip the processing of periods 1 through 4.
Regards,
Markus -
Hi Experts,
Cany any one suggest me to solve my issue with teh depreciation run.
When i am running depreciation run for the period 001-2008 (Apr-2008) to CC ABCD, system is giving the follwing error.
According to posting cycle, you should post period 002 next
Message no. AA683
Diagnosis
You cannot post depreciation in the period specified, as this will miss out a posting period.
System Response
No posting can be made in this period.
Procedure
According to the posting cycle, you should post period 002 next. Either enter period 002, which corresponds to the posting cycle, or request an unplanned posting run explicitly for this parameter.
Since i have not ran any depreciation run for the above said period and company code. i checked report S_P99_41000192 - Posted Depreciation also for values posted for the 001 period and found no postings for the period.
I have done the same dep run for the same CC in quality system it is giving test tun successfully completed, thwn why it is showing like this in production system.
Your immidiate action in this regard will be highly appreciated.
Thanks,
SrinuHi,
Thanks for your quick reply.
But my asset transfer date is set as 31.03.2008 for all the comp codes, and we ran the depreciation run for the other comp codes and going well.
Only for 2 company codes it is saying the error as specified in my previous threat.
I have checked OAYR setting also for the 2 Comp codes.
And if run the report RAHAFA_ALV01 with reporting date 30.04.2008 for the above said company codes and iam getting planned depreciation values for the 001-2008 (Apr2008). but if i run the AFAB i am getting the above said error.
And if i run the dep run for period 002-2008, i am able to see the line items and it is saying test run completed successfully.
And one more thing is we have capitalised assets also for the above 2 company codes on 01.04.2008, Then it should calculate the dep for 001-2008 period also---right?
Please clarify.....Since it is an important issue as of now.
Thanks,
Srinu -
Automatic postings r not updated thru business area wise like dep.run tax c
automatic postings r not updated thru business area wise like dep.run tax code also......how to updated this....
my client requirement.....plz halp meHi
Business area updations will not get updated through automatic postings like tax line generations, etc. You will have to search for some note for updations. Otherwise while preparing blance sheets for business area, you can make adjustment postings.
Regards, -
For CF Server 9 developer win 64bit has the same running problems like 32bit, or more
CFWACK8 reader:
Better install CF Server stand alone - so no need Apache? For CF Server 9 developer windows 64bit has the same running problems like 32bit, or more?
I have installed http://www.apachefriends.org/en/xampp-windows.html ..WAMPP, well Mysql may used by this CF Server 9 developer, although book use Apache Derby embedded to cf server?
CFEclipse plugin may installed either in my (separate) Flash Builder 4 or Eclipse Helios, or only to latter?CF 9 64-bit will generally be your best choice on a 64-bit platform, unless you specifically require something that's not available in 64-bit, like COM.
For development, the built-in web server is fine. But if you want to learn how to manage a web server, it's good to install Apache and configure CF to use that.
You may use any SQL engine for which there are JDBC drivers, including MySQL. Apache Derby is used for demos, etc, because it's bundled with CF. You don't want to use it for real projects, though.
You can install CF Builder in any modern Eclipse, including Helios or Flash Builder. This is largely a matter of personal preference. I've encountered some features that don't work properly unless you let CF Builder install its own bundled Eclipse, but these are features that I don't use much anyway.
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/ -
Applet running problem in ie 6.0 under Windows XP
Applet running problem in ie 6.0 under Windows XP
I have a PC running Iternet Explorer 6.0 running under Windows XP. I have developed an applet using JDK 1.3 which is running fine with applet viewer , but it is not running in ie. I have installed Netscape navigator and Opera 5. the applet is running fine in both of these browsers but somehow it is not running in IE.
Later on I upgraded my JDK to 1.4. It also displays use Java2 (V1.4.1) for <applet> (requires restart) tck marked in Advance section under Tools-Options menu of IE.
I have also tried and set various options in my Control Panel�s Java Plug-in but all in vain. I have searched the sites for this solution but no one answers specifically.
I know it�s a small problem due to discarded JVM in IE under Windows XP but give me solution for that.
Thanks in Advance
[email protected]Dear I have the same problem .
Applet running problem in 6.0 . Enen I have installed the latest Jre 1.5.
What should I do. I am fedup with this problem. -
I was prompted to downloaded a security update & so I did. when i tried to open firefox afterwards ,I couldn’t open it. My computer told me I had a DEP settings problem.I tried to change my computer's DEP settings but was notified i couldn't for firefox. I tried the uninstall & then install Firefox again route (could not even do it in safe mode since i can't even open firefox)but still had the same problem afterwards. What should I do?
Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Hi All,
I have one asset capitalized in May. I would like to start dep. from September onwards.
But while trying to start depreciation it is only for one month not for months from May to September.
I want the dep. to be posted from May to September for five months. What may be the possible solution?
Thanks.
Regards,
SantanuHi...
Go to AS03 and change Depreciation calculation start date from where you want run Dep in the depreciation area TAB. and Refresh in sap easy Access
Than go to AW01N - Asset Explorer and see the planed values. Here see whether the planned values start from May or not
And Go to AFAB than run with Repeat run. Than the problem was resolve.
I hope it will helps you
Thanks and Regards
sudharshana vamsi -
Error at the time of dep. run
Dear All,
I have assigned the cost centers in the asset master & also create the Dep. GL accounts as a cost element but the problem arise when i run the depreciation.
At the time of running the depreciation run, we are getting the following error, "GL account requires a CO assignment".
The problem is we can't assign one cost center to the cost element because assets are related to different cost centers and depreciation should be posted to different relevant cost centers so we can't assign the cost center in the Depreciation GL cost element.
The requirement is when we run the planned dep., all the dep. related cost should post to relevant asset cost centers.
Even in the OKB9 settings, we can assign only one cost center against that dep.gl cost element.
Kindly do the needful.
Regards
AnujHi
It is clear that your Org structure is different. You cant post deprciation to various cost centres. Post it to one cost centre and then go for assement/distribution. Alternatively you can use TCode KB11N for manual reposting from one cost centre to another.
Cheers
Srinivas -
dear all
i met a problem
i have run dep for period Aug, but i found that the balance sheet of July can not match with actual financial data in
SAP system,
so i want to adjust the depreciation of July now!
could anyone give me some advice? millions of thanks!
SaraDear,
Sara.
Considering your situation you must have run the depreciation for whole company code. Unfortunately in SAP we can never reverse the posted depreciation once it done. So far you can post manual adjustment ( Manual depreciation ) entries to your assets through ABZU Post Wriite Up depreciation.
It is always advisable and comes within SAP best practices that run depreciation in TEST RUN MODE first see it is up to matching financial criterion, not shuffling the rest financial data and confirming then only run in production mode.
I hope this may help to understand the situation.
Regards,
Pankaj A Bhalerao. -
Compile / run problems with netbeans 6 but not netbeans 6 beta 1 or 5.5
When I compile my project in netbeans IDE 6.0 (Build 200711261600) 1.6.0_01; Java HotSpot(TM) Client VM 1.6.0_01-b06 i get quite often a "can not find symbol" error or during runtime a "netbeans 6 java.lang.NoClassDefFoundError" exception. also switching between F6 or ctrl-F5 mode can cause the problem to appear.
Compiling again or clean build resolves it.
However running the same project under netbeans 5.5 or 6 beta 1 never gives this problem.
any hint what might be wrong? i looked and compared the project settings but can't see any difference, but I assume that the upgrade script must have changed something.<?xml version="1.0" encoding="UTF-8" ?>
- <project name="BorderDemo" default="default" basedir=".">
<import file="nbproject/build-impl.xml" />
</project>This is 'build.xml' file. Check for 'project.xml' file in 'nbproject' folder. You will find it to be:
<?xml version="1.0" encoding="UTF-8" ?>
- <project xmlns="http://www.netbeans.org/ns/project/1">
<type>org.netbeans.modules.java.j2seproject</type>
- <configuration>
- <data xmlns="http://www.netbeans.org/ns/j2se-project/3">
<name>BorderDemo</name>
<minimum-ant-version>1.6.5</minimum-ant-version>
- <source-roots>
<root id="src.dir" />
</source-roots>
</data>
</configuration>
</project>Change it to:
<?xml version="1.0" encoding="UTF-8" ?>
- <project xmlns="http://www.netbeans.org/ns/project/1">
<type>org.netbeans.modules.java.j2seproject</type>
- <configuration>
- <data xmlns="http://www.netbeans.org/ns/j2se-project/3">
<name>BorderDemo</name>
<minimum-ant-version>1.6.5</minimum-ant-version>
- <source-roots>
<root id="src.dir" />
</source-roots>
<test-roots>
<root id="test.src.dir" />
</test-roots>
</data>
</configuration>
</project>I hope it works.....
thanks! -
Yoga 3 Pro lmcfrundll​.exe Run Problem, how to fix?
While Lenovo is in the process of developing a solution, an official work-around to the automatic update delivered on February 7th to Yoga 3 Pro laptops bas been released to address the following errors:
lmcfrundll.exe application error unable to start correctly (0xc000007b)
problem starting c:\program files\lenovo\communications utility\libstartstub.dll specified module could not be found
Please note this is a work-around, not the final solution.
It is intended for Yoga 3 Pro systems running Win 8.1 on Lenovo Settings Dependency Package version 2.3.1.30 only.
The readme file and work-around can be obtained here:
https://drive.google.com/folderview?id=0B0Wzd6g3ynHwfmpTQmhxOHBUSGRSN05tejU1cU1hT1hDN3ZEN1MzUlR4LWRO...
Thank you,
2/20/15 EDIT: Tagging this temp fix as a solution so it can be found by others joining the conversation. I will tag the permanant fix when it becomes available. Amy_Lenovo
Amy Tupper
Technical Resolution Lead, Pervasive Issues
Lenovo US
ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996
Solved!
Go to Solution.I have a Yoga 3 Pro, Windows 8.1 Pro x64.
There are errors in the Event Viewer related to the problems of LMCSTART1, LMCSTART2, LMCSTART3, which I will cut and paste below. These are there because they are failing to load as the error message on the pop-up window states.
As for the libstartstub.dll "specified module could not be found", there were not errors or warnings in the Event Viewer related to this, but I have noticed that if I disable LENOVO.TPKNRRES from running (via OneKey Optimizer), that particular error doesn't come up.
Here are the errors now from Event Viewer:
Event ID 1005 (same error listed 3 times as an Application error, with a different RecordID listed below)
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Lenovo® Multimedia and Communications Framework Custom Rundll because of this error.
Program: Lenovo® Multimedia and Communications Framework Custom Rundll
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional Data
Error value: 00000000
Disk type: 0
- System
- Provider
[ Name] Application Error
- EventID 1005
[ Qualifiers] 49152
Level 2
Task 100
Keywords 0x80000000000000
EventRecordID for the three different times: 13645 - 13648 - 13651
- EventData
Lenovo® Multimedia and Communications Framework Custom Rundll
00000000
Faulting application name: lmcfrundll.exe, version: 5.0.9.73, time stamp: 0x54ab2d05
Faulting module name: ntdll.dll, version: 6.3.9600.17476, time stamp: 0x54516af9
Exception code: 0xc000007b
Fault offset: 0x000a36e5
Faulting process id: 0x644
Faulting application start time: 0x01d04337a63a774e
Faulting application path: C:\Windows\SysWOW64\lmcfrundll.exe
Faulting module path: C:\windows\SYSTEM32\ntdll.dll
Report Id: 33af5abb-af2b-11e4-8287-f87dd6bcf066
Faulting package full name:
Faulting package-relative application ID:
- System
- Provider
[ Name] Application Error
- EventID 1000
[ Qualifiers] 0
Level 2
Task 100
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2015-02-08T00:41:22.000000000Z
EventRecordID 13650
Channel Application
Security
- EventData
lmcfrundll.exe
5.0.9.73
54ab2d05
ntdll.dll
6.3.9600.17476
54516af9
c000007b
000a36e5
644
01d04337a63a774e
C:\Windows\SysWOW64\lmcfrundll.exe
C:\windows\SYSTEM32\ntdll.dll
33af5abb-af2b-11e4-8287-f87dd6bcf066
Faulting application name: lmcfrundll.exe, version: 5.0.9.73, time stamp: 0x54ab2d05
Faulting module name: ntdll.dll, version: 6.3.9600.17476, time stamp: 0x54516af9
Exception code: 0xc000007b
Fault offset: 0x000a36e5
Faulting process id: 0x15e4
Faulting application start time: 0x01d04337a609bbd0
Faulting application path: C:\Windows\SysWOW64\lmcfrundll.exe
Faulting module path: C:\windows\SYSTEM32\ntdll.dll
Report Id: 33170cdc-af2b-11e4-8287-f87dd6bcf066
Faulting package full name:
Faulting package-relative application ID:
- System
- Provider
[ Name] Application Error
- EventID 1000
[ Qualifiers] 0
Level 2
Task 100
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2015-02-08T00:41:21.000000000Z
EventRecordID 13647
Channel Application
Security
- EventData
lmcfrundll.exe
5.0.9.73
54ab2d05
ntdll.dll
6.3.9600.17476
54516af9
c000007b
000a36e5
15e4
01d04337a609bbd0
C:\Windows\SysWOW64\lmcfrundll.exe
C:\windows\SYSTEM32\ntdll.dll
33170cdc-af2b-11e4-8287-f87dd6bcf066
Faulting application name: lmcfrundll.exe, version: 5.0.9.73, time stamp: 0x54ab2d05
Faulting module name: ntdll.dll, version: 6.3.9600.17476, time stamp: 0x54516af9
Exception code: 0xc000007b
Fault offset: 0x000a36e5
Faulting process id: 0xb74
Faulting application start time: 0x01d04337a5c87954
Faulting application path: C:\Windows\SysWOW64\lmcfrundll.exe
Faulting module path: C:\windows\SYSTEM32\ntdll.dll
Report Id: 32206a90-af2b-11e4-8287-f87dd6bcf066
Faulting package full name:
Faulting package-relative application ID:
- System
- Provider
[ Name] Application Error
- EventID 1000
[ Qualifiers] 0
Level 2
Task 100
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2015-02-08T00:41:19.000000000Z
EventRecordID 13644
Channel Application
Security
- EventData
lmcfrundll.exe
5.0.9.73
54ab2d05
ntdll.dll
6.3.9600.17476
54516af9
c000007b
000a36e5
b74
01d04337a5c87954
C:\Windows\SysWOW64\lmcfrundll.exe
C:\windows\SYSTEM32\ntdll.dll
32206a90-af2b-11e4-8287-f87dd6bcf066
Maybe you are looking for
-
Unable to upgrade PI JAVA stack from 7.10.4.0 to 7.11.6.0
Using JSPM and choose the Business package option, getting this error. How do I find out which are the pre-reqs for LM-SLD? There is plenty of disk space. Details message(s): Archive /usr/sap/trans/EPS/in/LMSLD06_0-20002693.SCA for component sap.co
-
When I try to save my psd-files as PDF in Photoshop the following message comes up: "Could not save as "xxxxxx.pdf" because PDFL initialization falied." Does anyone know what this means and/or how i fix it?
-
Error with JMS receiver channel
Hi, We have a scenario in which Order response will be sent from ECC to WebLogic (JMS system) through PI. After the restart of JMS, we are facing issues with JMS receiver channel. Some of the responses are delivered, and for few we have the error as
-
59.94i exporting as 23.976 - without duplicating frames???
Dear those in the know. I am about to obtain some master tapes in the HD 59.94i format, I will be importing via the blackmagic 3D extreme deck into FCP, with a HD cam deck. I will need to prepare files for several digital platforms which accept these
-
Filter on collection is possible?
hi, i need filter on object that have a collection and key. eg: Filter filter = new LikeFilter("getBotoneras.grpObj", "HT1"); but throws java.lang.RuntimeException: Missing or inaccessible method: java.util.ArrayList.grpObj() public class BotoneraB2