Depb entries

hi friends,
i don't know it comes comes in which module ( i think in SD ) but still if anybody knows where should we put the entries of DEPB ( Duty Entitlement Pass Book Scheme ) or in which table these entries are.
with regards,

Hi,
some infrmation on DEPB.
Manufacturers, Exporters, Importers, Shipping and Clearing Agents - Advertise Here
Click Here for DEPB Rates 
  DUTY ENTITLEMENT PASSBOOK SCHEME (DEPB)                           
The Duty Entitlement Passbook Scheme is a part of  Duty Remission Scheme. 
For exporters not desire of going through the licensing route, an optional facility is given under DEPB. 
The objective of DEPB is to neutralise the incidence of Customs duty on the import content of the export product.  The neutralisation shall be provided by way of grant of duty credit against the export product.  
The DEPB scheme will continue to be operative until it is replaced by a new scheme which will be drawn up in consultation with exporters.
Under the DEPB scheme, an exporter may apply for credit, as a specified percentage of FOB value of exports, made in freely convertible currency or the payment made from the Foreign Currency Account of the SEZ unit in case of supply by DTA to SEZ unit.
The credit shall be available against such export products and at such rates as may be specified by the Director General of Foreign Trade by way of public notice issued in this behalf, for import of raw materials, intermediates, components, parts, packaging material etc. The credit may also be utilized for payment of Customs Duty on any item which is freely importable.
(ii) The holder of DEPB shall have the option to pay additional customs duty, if any, in cash as well.
Validity
The validity period of DEPB for import shall be as prescribed in the Handbook of Procedures (Vol.1).
Transferability
The DEPB and/or the items imported against it are freely transferable. The transfer of DEPB shall however be for import at the port specified in the DEPB, which shall be the port from where exports have been made.
Imports from a port other than the port of export shall be allowed under TRA facility as per the terms and conditions of the notification issued by Department of Revenue.
Applicability of Drawback
Normally, the exports made under the DEPB Scheme shall not be entitled for drawback. However, the additional customs duty/excise duty paid in cash or through debit under DEPB shall be adjusted as CENVAT Credit or Duty Drawback as per rules framed by the Department of Revenue.
Calculation of Duty Credit
The duty credit under the scheme shall be calculated by taking into account the deemed import content of the said export product as per SION and the basic custom duty payable on such deemed imports. The value addition achieved by export of such product shall also be taken into account while determining the rate of duty credit under the scheme.
Fixation of DEPB Rate
u2018Aayaat Niryaat Formu2019 prescribes the form regarding fixation of DEPB rates. All applications for fixation of DEPB rates shall be routed through the concerned Export Promotion Council which shall verify the FOB value of exports as well as the international price of inputs covered under SION.
Provisional DEPB Rate
To encourage diversification and to promote export of new products, the DEPB Committee would be empowered to notifying provisional DEPB rates. However, such DEPB rates would be valid for a limited period of time during which the exporter would furnish the data on export and import for the regular fixation of rates.
Exports in anticipation of DEPB Rate
No exports shall be allowed under DEPB scheme unless the DEPB rate of the concerned export product is notified.
Port of Registration
The exports/imports made from the specified ports given shall be entitled for DEPB.
Sea Ports: Mumbai, Kolkata, Cochin, Dahej, Kakinada, Kandla, Mangalore, Marmagoa, Mundra, Chennai, Nhavasheva, Paradeep, Pipavav, Sikka, Tuticorin Vishakhapatnam, Surat (Magdalla), Nagapattinam, Okha , Dharamtar and Jamnagar.
Airports: Ahmedabad, Bangalore, Bhubaneshwar Mumbai, Kolkata Coimbatore Air Cargo Complex, Cochin, Delhi, Hyderabad, Jaipur, Srinagar, Trivandrum, Varanasi, Nagpur and Chennai.
ICDs : Agra, Ahmedabad, Bangalore, Bhiwadi, Coimbatore, Daulatabad, (Wanjarwadi and Maliwada), Delhi, Dighi (Pune), Faridabad, Guntur, Hyderabad, Jaipur, Jallandhar, Jodhpur, Kanpur, Kota, Ludhiana, Madurai and the land Customs station at Ranaghat Mallanpur, Moradabad, Meerut Nagpur, Nasik, Gauhati (Amingaon), Pimpri (Pune), Pitampur (Indore), Rudrapur (Nainital), Salem Singanalur, Surat, Tirupur, Udaipur, Vadodara, Varanasi, Waluj, Bhilwara, Pondicherry ,Garhi-Harsaru, Bhatinda, Dappar, Chheharata ( Amritsar), Karur, Miraj and Rewari.
LCS: Ranaghat, Singhabad , Raxaul , Jogbani, Nautanva ( Sonauli), Petrapole and Mahadipur.
The exports made to the following Special Economic Zones (SEZ) are also entitled to DEPB
SEZ : Santacruz , Kandla, Kochi, Vishakhapatnam, Chennai, FALTA, Surat, NOIDA
Provided further that the Commissioner of Customs may, either by a public notice or on the written request of the exporter/ DEPB holder, by special orders and subject to such conditions as may be specified by him permit imports or exports from any other sea port, airport, inland container depot or through a Land Customs Station.
The DEPB shall be issued with single port of registration, which will be the port from where the exports have been effected.
Maintenance of Record
Each Custom House at the ports shall maintain a separate record of the details of the exports made under the DEPB shipping bill.
Credit under DEPB and Present Market Value
In respect of products where the rate of credit entitlement under DEPB Scheme comes to 10% or more, the amount of credit against each such export product shall not exceed 50% of the Present Market Value (PMV) of the export product. At the time of export, the exporter shall declare on the shipping bill that the benefit under DEPB Scheme against the export product would not exceed 50% of the PMV of the export product.  However, PMV declaration shall not be applicable for products for which value cap exists irrespective of the DEPB rate of the product.
Utilisation of DEPB credit
The credit under DEPB shall be utilised for payment of customs duty on any item which is freely importable.
Application for DEPB
An application for grant of credit under DEPB may be made to the Regional Authority concerned in the form given in u2018Aayaat Niryaat Formu2019 alongwith the documents prescribed therein. The agency commission shall be allowed for the DEPB entitlement upto the limit of 12.5% of FOB value only. The FOB value in free foreign exchange shall be converted into Indian rupees as per the exchange rate for exports, notified by Ministry of Finance, as applicable on the date of order of u201CLet Exportu201D by the Customs.
In respect of consignment exports wherein the exporter has declared the FOB value of the product on a provisional basis, the exporter shall be eligible for final assessment of such shipping bill based on the actual FOB realised upon sale of such goods in freely convertible currency. The agency commission shall be allowed for the DEPB entitlement upto the limit of 12.5% of FOB value only. However, the FOB value of foreign exchange shall be converted into Indian rupees as per the exchange rate for exports, notified by Ministry of Finance, as applicable on the date of order of u201CLet Exportu201D by the Customs.
An application for grant of credit for supplies from DTA to SEZ can be made by the DTA unit or the SEZ unit. The DTA unit may claim the benefits either from the Regional Authority or the Development Commissioner concerned. In case claim have been filed with the Regional Authority, the Regional Authority while allowing the benefits to the DTA unit will simultaneously endorse a copy of the communication to the concerned Development Commissioner alongwith the details of export documents against which benefits have been allowed for confirmation of the transaction involved. In case the DTA supplier prefers claim with the Development Commissioner, the Development Commissioner shall verify the Denied Entity List (DEL) status of the supplier from the DGFT website before allowing DEPB benefits. The SEZ unit will file application with the Development Commissioner concerned in u2018Aayaat Niryaat Formu2019 along with the following documents:
1.   Bank receipt (in duplicate)/ demand draft evidencing payment of application fee in terms of Appendix 21B.
2.   A copy of bill of exports issued by Customs in the SEZ.
3.   A copy of invoice showing FOR value of supply, DEPB entitlement on such supply and total value realised from such sale.
4.   Bank certificate of realisation in the form given in Appendix 22B.
5.   In case SEZ unit opts to apply for the DEPB benefit for such supplies received, a disclaimer (along with the IEC of DTA Unit endorsed on it) certificate from DTA unit declaring that the DTA unit shall not claim any benefit on such supplies and authorising SEZ units to claim DEPB benefit on such supplies.
In cases where the applicant applies for DEPB after realisation or shipments are made against confirmed irrevocable letter of credit or bill of exchange is unconditionally Avalised/ Co-Accepted/ Guaranteed by a bank and the same is confirmed by the exporters bank and certified by the bank in the relevant Bank certificate of export and Realisation, the DEPB shall be issued with transferable endorsement. In other cases, the DEPB shall be initially issued with non-transferable endorsement.  Upon realisation of export proceeds, such DEPBs can be endorsed as transferable, if the applicant so desires.
Monitoring of Realisation
The Regional Authorities shall monitor the cases where the DEPB has been granted prior to realisation of export proceeds (except the cases where shipments are made against confirmed irrevocable letter of credit or bill of exchange is unconditionally Avalised/ Co- Accepted/ Guaranteed by a bank and the same is confirmed by the exporters bank) so as to ensure that realisation takes place within the prescribed time failing which they shall initiate action for recovery of an amount equivalent to DEPB credit with 15% interest. The recovered amount in such cases shall be deposited in the head of account of Customs as stated in paragraph 4.29.
If the export proceeds is not realised within six months or such extended period as may be allowed by RBI, the DEPB holder shall pay in cash an amount equivalent to the duty free credit utilised on imports, against such exports with 15% interest from the date of import till the date of deposit. In such cases, where the amount realised in foreign exchange is less than the amount on which DEPB credit has been obtained, the holder of DEPB shall pay, in cash, an amount proportionate to the duty free credit utilised on imports, with 15% interest from the date of imports till the date of deposit.
Time Period
The application for obtaining credit shall be filed within a period of twelve months from the date of exports or within six months from the date of realization or within three months from the date of printing/ release of shipping bill , whichever is later, in respect of shipments for which the claim have been filed.
Wherever provisional shipment has been allowed by the customs authorities, DEPB against such exports shall be issued only after the release of the shipping bill by the Customs. In such cases, application for DEPB shall be filed within six months from the date of release of such shipping bill or six months from the date of realisation, whichever is later.
Frequency of Application
All the shipping bills in any one application must relate to exports made from one Custom House only. There is no limit on the number of shipping bills which can be filed through EDI mode in a single application.
Verification by Customs
In case of EDI shipping bills before 1.10.2005 and non-EDI shipping bills, the Regional Authority shall ensure that while issuing the DEPB, the Shipping Bill No(s). and date(s), FOB value in Indian rupees as per Shipping Bill(s) and description of export product are endorsed on the DEPB. Before allowing the imports against such DEPB, the Customs shall verify that the details of the exports, as given on the DEPB, are as per their records. However, in case of EDI shipping bills issued on or after 1-10-2005 from EDI ports which are being transmitted electronically by Customs to DGFT, the DEPBs issued shall be sent to Customs at the port of registration through an electronic message exchange system and the DEPB shall be registered at the port of registration electronically. No verification of shipping bills against which such DEPBs have been issued, will be required before allowing imports against these DEPBs.
Revalidation
No revalidation shall be granted beyond the original period of validity of DEPB unless it expires in the custody of the Regional/ Customs Authorities as per the provisions under para 2.13 of the Handbook.
Re-export of goods imported under DEPB Scheme
Goods imported under DEPB scheme, which are found defective or unfit for use, may be re-exported, as per the guidelines issued by the Department of Revenue. In such cases 98% of the credit amount debited against DEPB for the export of such goods, shall be generated by the concerned Commissioner of Customs in the form of a Certificate, containing the amount generated and the details of the original DEPB. Based on the certificate, a fresh DEPB shall be issued by the concerned Regional Authority. The fresh DEPB, so issued, shall have the same port of registration and shall be valid for a period equivalent to the balance period available on the date of import of such defective/unfit goods.
Issuance of DEPB and other duty credit certificates/ DFRC against lost EP copy of the Shipping Bills
In case where EP copy of the Shipping Bill has been lost, the DEPB and other duty credit certificates /DFRC claim can be considered subject to submission of the following documents:-
a) A duplicate/certified copy of the Shipping Bill issued by the Customs Authority in lieu of original;
b) An application fee equivalent to 2% of the DEPB or other duty credit entitlement or 1% of DFRC entitlement, as the case may be, in respect of lost Shipping Bills.
However, no fee shall be charged when the Shipping Bill is lost by the Government agencies and a documentary proof to this effect is submitted;
c) An affidavit by the exporter about the loss of Shipping Bills and an undertaking to surrender it immediately to the concerned Regional Authorities, in case the same is found subsequently.
d) An indemnity bond by the exporter to the effect that he would indemnify the Government for the financial loss if any on account of DEPB or other duty credit certificate /DFRC issued against lost Shipping Bills.
The Customs Authority, before allowing clearance, shall ensure that no DEPB/DFRC benefit has been availed against the same shipping bill.
The claim against the lost Shipping Bill shall be preferred within a period of six months from the date of release of duplicate copy of shipping bill and any application received thereafter will be rejected. However, if a provisionally assessed DEPB shipping bill is lost, the time period for filing an application for DEPB would be six months from the date of release of the finally assessed shipping bill.
Loss Of Original Bank Certificate
In such cases where original bank certificate has been lost, the DEPB/DFRC claim can be considered subject to submission of following documents:
a)     A duplicate copy of the Bank Certificate issued by the bank authority in lieu of original loss.
b)     An application fee equivalent to 2% of the DEPB entitlement or 1% of DFRC entitlement, as the case may be, in respect of lost Bank Realisation Certificate.
c)      An affidavit by the exporter about the loss of Bank Certificate and an undertaking to surrender it immediately to the concerned Regional Authorities, in case the same is found subsequently.
d)     An indemnity bond by the exporter to the effect that he would indemnify the Government for the financial loss .if any on account of DEPB/DFRC issued against lost Bank Certificate.
The claim against the lost Bank Certificate shall be preferred within a period of six months from the date of realisation and application received thereafter will be rejected.
In such cases, where both the documents have been lost, the exporter shall follow the procedure laid down in paragraphs u201CRe-export of Goods Imported under DEPB Schemeu201D and  u201CIssurance of DEPB/DFRC against lost EP copy of the Shipping Billu201D above .
Export management is all about handling complex local laws, trade measures, documentation and meet trade compliance requirements.u201D
Although global trade has experienced a compound annual growth rate of 9.3% during the past 20 years, many companies still rely on outdated manual processes and paperwork for international business. These time-consuming, error-prone methods are incapable of handling the complex challenges of global trade. To conduct business in other countries, your company must comply with local laws, satisfy trade security measures, meet documentation requirements, understand complicated tariffs and duties, and coordinate the involvement of all parties. Handling these responsibilities manually increases the risk of failure and failure can be costly when trading across borders.
OBT Global developed an application to address the requirements of Indian Export Scenarios. This Export Management System application is developed using ABAP/4 Language on SAP R/3 catering specifically to the Indian Export scenarios. This is interfaced with SAP.
This application handles various incentive export schemes like Advance License, Duty Entitlement Pass Book Scheme (DEPB), Duty Free Replenishment Scheme (DFRC) and Export Promotion Capital Goods (EPCG).
The extensive documentation that is required like ARE-1, ARE-3, Pre Shipment document, Post shipment document and Bill of lading can be generated using this package.
This application utilizes the data stored in SAP Master Tables there by reducing the effort for duplicate data maintenance. Details pertaining to the Bond Register can also be maintained.
Business Benefits
Ensures delivery compliance
Increase transparency
Comply with legal regulations
Mitigating risks (cost avoidance of penalties for violating legal regulations and avoidance of negative publicity).
The solution supports
Generates all Export documents for International Trade
Tightly Integrated with SAP
Data Maintained in SAP
Conclusion
With OBTEMS, you can lower the cost, and reduce the risk, of doing business internationally. This solution helps companies standardize and streamline trade processes across their entire enterprise and business units.
Best regards,
venkataswamy.y
Edited by: yanamadala venkataswamy on Nov 29, 2008 7:30 PM

Similar Messages

  • Hi-depb issue

    hi gurus plz help me ,my client wants the accounting of DEPB on accrual basis.At the time of exporting billing system should create the accrual and income booking. whenever actal license will be recieved the accrual entry would reveresed .plz tell me how i will do this
    with regards
    diptiranjan das

    Normally we are posting these entrys in our system.
    Export(b/s)
    Open
    Vendor (commissioner)             dr
                  To  Depb against export      
    clear     
    depb against export              dr 
                            to vendor (commissioner)
    purchase(b/s)
    open
    Vendor (commissioner)             dr
                            To depb purchase
    Clear
    Depb purchase                        dr
                          To Vendor (commissioner)          
    Reciveable(b/s item)
    Depb against export           dr
                        To depb receivable
                        To depb recd a/c
    Depb recd account  (revenue)
    Depb against export              dr
                                  To depb recd a/c
    We want the accounting of DEPB on accrual basis. At the time of exporting billing system should create the accrual and income booking. Whenever actual license will be received the accrual entry would reversed .
    plz tell me how i will configure it.

  • On Android 4.2.2 on a Nexus7 tablet - No Firefox button and most text entry fields do not work at all

    I installed Firefox 19.0.2 and appears to be ok, but I don't see a Firefox button anywhere, so I cannot access any of the functions that it controls, such as bookmarks, which is why I installed it!
    The ASUS Nexus 7 tablet shows up as a supported platform.
    I set it as the default link browser, but quickly realized that I could not enter text into any data entry fields, so I reset the default back to Chrome, which works fine for that.
    I installed Firefox because bookmarks in Chrome are very lame, but I can't use bookmarks at all in Firefox, so again Chrome wins.
    Any suggestions, before I uninstall it?

    I am now a Democrat supporter. dccc.org does accept text input from my mobile.
    The forum problem I mentioned earlier is apparently a known issue but only affecting legacy phones.

  • Options - Text Editor - C/C++ missing intellisense entry. Intellisense not working

    Options -> Text Editor -> C/C++ missing intellisense entry.  Intellisense not working.    Solutions to turn options for the editor off and on are not working.  The intellisense entry is present for other languages,
    such as C#, but not C/C++.
    By not working, I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.

    Hi JerroldBrody,
    Thank you for posting in MSDN forum.
    >>I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.
    Based on your issue, could you please share me a screen shot about the intellisense right click menu items are grayed out?
    Generally, I know that it is default that we can enable the intellisense for C/C++ by going to the TOOLS->Options -> Text Editor -> C/C++ ->Advanced-> IntelliSense like the following screen shot.
    So please try to check if you set Disable Intellisense property as False in the VS IDE.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • My new icloud acct on my imac is duplicating entries in calendar from my ipad; how do I get rid of the duplicates and how do I get one calendar to be the main one to start with

    I've just installed Mavericks on my iMac and now my calendar has duplicate and now sometimes tripled events by syncing with my ipad mini regardless of whether the item already existed in the iMac calendar already. How do I remove the duplicates? It was being able to sync calendars and contacts which was one of my reasons for moving from Snow Leopard to Mavericks and now it's a mess.

    Crista70, What is happening is you now have 2 calendars with the entries in them. If you go into View, then Show Calendar List, you will see all your calendars. Uncheck the ones listed as "From My Mac" or uncheck the ones listed as "iCloud" and they will no longer show as duplicates. Personally, I prefer unchecking the "From My Mac" calendars so that my calendars are all synced across the devices.

  • How to delete the entries in the given field box

    Hi Every One,
    How can I delete the entries which I have given in example SE37 box.
    When I press Backspace button the entries which I have given will appear so I want to delete these entries.
    With Regards,
    Venkat

    Hi,
    Goto ==> Customize Local Layout (Alt + F12) , then Options ====> LocalData=======> Clear History
    This process should clear your history.

  • ICal only displays a single line for entries in month view.

    This means I can't see what my diary entries refer to.  Can I change it to show two lines or the full entry, as iCal did in Snow Leopard?

    Hi Guys, thanks for getting back to me.
    the problem is purely about design view display and not about coding.
    Below is how CS4 displays borders with two lines which I find difficult to decipher:
    Then below is Macromedia DM 8 and this how I want the borders to look, with single lines to display the tables.
    This may just be the way Abobe have decided to display tables in design view and there may not be any option to change it but if you know any way to change it I would be most greatful.
    Thanks again.
    G

  • I'm not able to create a iphoto calendar with the correct birthday entries.

    Hello,
    I use the latest Iphoto version and OS X 10.9.
    I tried to create a calendar in iphoto that includes all birthday information of my family. Unfortunately I'm not able to do this.
    I tried two differnt ways to get the information into the calendar.
    First of all I' tried to use the option of the calendar to get the information of my contacts and it partly worked. Some dates were missing and I was not able to modify or add additional birthdays in the calendar. I checked my contacts and the information was there but not shown in the Iphoto Calendar.
    Therefore I have to get the information into the calendar in a different way. For that I created a new calendar in ICal and created for each Birthday entries.
    I select the option in the Iphoto calendar to show the new calendar in iPhoto. But the result was worse than with the first solution. Only few entries was shown in the calender.
    Do anybody have an idea how can I solve this issue.
    Thank you in advanced,
    Philipp

    First of all I' tried to use the option of the calendar to get the information of my contacts and it partly worked. Some dates were missing and I was not able to modify or add additional birthdays in the calendar. I checked my contacts and the information was there but not shown in the Iphoto Calendar.
    Do the birthdays (from Contacts) show correctly in the Calendar app? Sometimes there is a formatting problem with the date string in the Contacts. If the Birthdays do not show correctly in the Calendar.app, try to delete them from Contacs and enter them again, and check, if they now are showing correctly in Calendar. Quit both Contacts and Calendar.
    Then restart iPhoto, and in the "Settings" for your Photo Calendar disable the Birthdays option, and then turn it on again.
    Any changes you do to the birthdays in Contacts may only appear in iPhoto Calendars after Calendar or Contacts wrote their databases, and iPhoto will read these databases, when you enable the "Birthdays" option. Toggling this option on and off will ensure, that the new Contacs info will be read.
    -- Léonie

  • Is there a way to add event details using a calendar object vs. those dumb field entry boxes?

    I have switched from PC to Mac over a year and a half ago, and have been plagued with the "dumb" date entry boxes in iCal and now Reminders on the mac. For one, they don't show you the DAY OF WEEK for an event, it assumes you are parked on that day, but of course reality sets in and causes constant date changes for events. Picking a date in the future would be much more helpful if Apple followed some usability norms in iCal. For instance, if you are booking a flight online, those helpful little calendar objects pop up, and further, they are smart about "end dates and times" for events, knowing it can't be earlier than the start date. Apple iCal unfortunately always thinks you are creating an ALL DAY event, and when you change the start time, it creates the end time for the next day. Not very smart. Or is it me that is not very smart for constantly hawking every little data entry field for correctness. Why, oh why dear lord has Apple not given some usability attention to iCal on the mac??? At least match the interface of the iPhone with a nice little slot machine rolling control.
    Is there an add in?
    Is there hope that Apple will ever fix its lagging Mail and iCal apps on the Mac?
    Please advise. Or just offer a kind word of consolation if there is no hope for a better interface.

    In the future, Swing related questions should be posted in the Swing forum.
    The code you posted is of little use since it uses custom classes so we can't see the behaviour of your code.
    In general if you add a component to a Container at run time then you just use
    container.revalidate()
    This will invoke the LayoutManager and repaint the components in the container based on the new layout.

  • Creating Master to show only rows for which valid entries exist in Detai

    I have created a Master-Detail Form in my Apex application based off of views to tables in a private remote Database.
    In the Master-Detail Creation Wizard, at the "Link Master and Detail" page, I specified that the defined Primary Key in the Master Column should be equal to the corresponding Foreign Key in the Detail Column.
    My goal is to have my Master Form only display rows for which a valid corresponding entry exists in the Detail Form. Yet, the above setup returns all of the rows from the Master Table, even where the corresponding Detail entry is blank.
    Can you provide some light on what I'm doing wrong, and how I can accomplish what I want to do?
    Thank you!

    I have created a Master-Detail Form in my Apex application based off of views to tables in a private remote Database.
    In the Master-Detail Creation Wizard, at the "Link Master and Detail" page, I specified that the defined Primary Key in the Master Column should be equal to the corresponding Foreign Key in the Detail Column.
    My goal is to have my Master Form only display rows for which a valid corresponding entry exists in the Detail Form. Yet, the above setup returns all of the rows from the Master Table, even where the corresponding Detail entry is blank.
    Can you provide some light on what I'm doing wrong, and how I can accomplish what I want to do?
    Thank you!

  • Opening a new view in a new window on click of a table row entry.

    Hi Guys,
    How to open a new View of a same application in a new window (just like a pop up) on a click of a Table Row entry?
    I am using NWDS 7.0 version. So please suggest acccorrdingly.

    Hi Nikesh,
    first of all you will have to declare use of onLeadSelect event handler for your table (note that it will only be triggered when a lead selection occurs not a multiselection).
    Also, you can build at design time a View and a Window (for example, PopupWin) in your WebDynpro Component, and embed the view into the window.
    In your code for onLeadSelect function, you can use something like this to pop up the window.
    public void onActionRowSelection(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
        //@@begin onActionSeleccionTabla(ServerEvent)
        IWDWindowManager windowManager = wdComponentAPI.getWindowManager();
        IWDWindowInfo windowInfo = wdComponentAPI.getComponentInfo().findInWindows("PopupWin");
        IWDWindow window = windowManager.createModalWindow(windowInfo);
        window.setWindowPosition(WDWindowPos.CENTER);
        window.setWindowSize(new WDCssSize(450, WDWindowUnitOfLength.PX) , WDCssSize.UNDEFINED);
        // Store handle ti window in context attribute to able to close it later
        wdContext.currentContextElement().setPopup(window);
        window.show();
        //@@end
    Hope it helps,
    David

  • Remote system monitoring entry- data not relayed to Central system

    Hello Folks,
                        I am trying to establish a central monitoring system for our client. I am trying to test it in the DEV environment first.
    The central system is a Solution manager system (Dual stack- ABAPJAVA). I am trying to bring in monitoring data from the ECC development environment (ABAPJAVA).
    First of, i created to RFC connections in Solution manager system, one for data collection and the other for analysis. I have maintained the host address of the ECC system as target.
    Then i have created a remote system entry in Transaction RZ21--> technical infrastructure entered the 2 RFC names and have executed the function.
    At this point i am only trying to bring in ABAP stack monitoring data form the ECC system so i have not generated the CSNCONF file.
    Now when i look in Solution manager RZ20-->CCMS monitoring templates, i can't see any data for the the ECC system.
    I guess i am doing something wrong. Am i looking in the wrong monitor set?
    As additional information: Solution manager (SMD) and ECC (ECD) use different transport domains / transport groups. I dont know if this makes a difference.
    Can some one please help.
    Regards,
    Prashant

    Hi Prashant,
    if I understand correctly your system shows only MTEs from R/3 Stack, not from the OS side, pls check your SAPOSCOL. Are the data in OS06 in your remote system correct and do you see the current data, refredhed all 10 seconds?
    To check your environment, pls do the following:
    in th efirst step check in RZ21 > in the Topology part the System Overview for your system connection to your back end system. Are the Read Destination Data RFC and the Destination Analysis RFC correct and works the authority chek fine?
    In the second step pls check in RZ21 > in the Agents for Remotey SAP Systems part; are there registered your remote ccms agents correctly and works the connection test.
    Stop the agents and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the read RFC destinations?
    Start the agents and and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the CCMS Agent RFC destinations?
    To rebuild the Monitor in the CEN system you could try to reset the node of your remote system in the warm up status > go in the remote system to RZ1 > go to local segments  > change to edit > select your segments > reset segment in "WARMUP" status.
    In the CEN system you coul try to go to the edit mode for the Agents for Remot SAP Systems > select your remote system and push the button Reinitialize Agents
    In the back end system you can try to delete all MTEs in RZ21 > menu Technical Infrastructure > Reorgenize Segment Table > select the options with "ALL" in the CEN and the remote system to reorgenize all data.
    Could you pls post for the missing MTEs a screenshot on the one side from the CEN system and on the other side from the remote system...
    and last but not least you could try the following for missing OS MTEs
    delete  ALALERTS, ALMTTREE and ALPERFHI in /usr/sap/ccms/<SID>_<SNR> and check in the agents folder all trace and log files for errors.

  • How can I see how many entries in an address Book group ?

    I used to be able to see at a glance how many entries there were in any particular group.
    This now seems to have vanished :-(
    Can I get it back easily ?

    I agree with Bengt W. There are many reasons, even in a simple movie, to want to know the timing of things. This is a surprisingly frustrating product. For want of timing information, you are requiring your users to pay $300?
    In my situation, I took some video of a show (with the performers permission) with an iPad and an iPod.  All I want to do is make a movie with one video as the main position with a series of cutaway clips from the other. It is incredibly frustrating to do this without knowing where you are within each clip.
    When helpful and capable forum participants like we have here have to spend time explaining how best to make do with a product, it's a clear indication of a fault with the product. Now, I either have to spend extra time in iMovie making due with this crippled interface, or I have to spend time looking for an alternative product.
    Consider this a feature request!

  • Error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR

    While loading master data for 0PLANT, its giving me following error.
    "error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR"
    Please help me out.
    Thanks

    steve,
    Can you give the solution you used to correct this problem?
    This error occurred in BW during import.
    Raj.

  • Error that "specify a value for variable posting period (single value entry

    hi
    My query is running testing fine in RSECADMIN under some username..but when i try and open it using analyzer (under same username) it gives me error that "specify a value for variable posting period (single value entry, mandatry)" it does'nt even asks to enter variable values and gives this error message.
    However the same query appears to be working fine under different username.
    plz advise.

    Hi Abhinav,
    Just do one thing compare the Roles of two different users for which Query is getting executed and not.
    Check the Object S_RFC.
    Compare the Objects detail for Both the Users.
    Please Assign points if useful.
    Regards,
    Rajdeep.

Maybe you are looking for

  • Xorg 1.8.1.902 & Catalyst 10.6-5 & Mobility Radeon HD 2600

    Hello all, I'm reporting in with an error that I can't seem to shake since the Xorg 1.8 and Catalyst 10.6 release. I have been unable to get the two to place nice with the Mobility Radeon HD 2600 in my HP Compaq 8510p notebook. I've followed the inst

  • Ads are not displaying properly in Safari, v 4.0.5

    I am having an odd problem with display ads from our local newspaper not displaying properly on my Mac Pro in Safari. I suspect that the issue might be related to having had some AdBlock app on my system a few months ago. I removed the app and some a

  • Loading History Data

    Hi All. I have some data loaded in BW flow from Nov 13 to Till date.Its a daily load.Now the client wants the data before Nov. 13 also.One month data has above 2 crore records.Its an FIGL Load.As its a daily load,i have a small window of time to load

  • Upgrading ANT for JDev 10.1.2

    How do you upgrade Ant for all projects in JDev 10.1.2? Thanks.

  • OBIEE custom formatting/threshold

    Hello, While performing the custom formatting, instead of changing color and font, adding image ,can we add text like HIGH, LOW, MEDIUM etc. For example: if some metrics have its value greater than $5000 then instead of changing its color i want to a