Dependant Requirements and Planned Orders
Hi,
For dependant requirement, question is whether once the planned orders (of independent requirements) are converted to production orders, then only will the dependant requirements be converted to planned orders
or it is converted once independent requirements are converted to planned orders? I.e. independent requirements are blown down all the way in MRP.
Thanks.
Rgds,
Sue
Hi,
Let us take some example so that it is easier to explain.
Material A - Finished Good
Material B - Raw material
PIR generated for A - 100 Nos , MRP is run and Planned order created for A - 100 Nos. Now
For Mtl B Dep reqt is generated for 100 Nos.
If No stock is available then a planned order for 100 nos generated.
IF Stock is availabel then no planned order is generated.
When production order is created for Mtl A then the "dep reqt" status of Mtl B changes to
"ordres"(order reservation)status.U can check this MD04.
Thanks and regards,
Rajesh
Similar Messages
-
List of dependent requirements of planned order for a component
Dear guru ,
I search a list of dependent requirements of planned order for a component
What do you suggest ?
Thanks.Hi Cristano,
Go to MD04 transaction, enter comopenet and plant. Then from the list select the Planned order and click on the Order Report from the bottom tool bar available below the list.
You can see the componets details for that planned order.
Thanks and regards
Murugesan -
Dependent Requirements vs Planned Orders: how to retrieve?
Hello SAP Gurus,
I have noticed that in table PLAF, we can see which (simulative) requirement has been generated by MRP for a given planned order.
Also, in table MDSM, we can see what was the originating planned order for a given requirement.
My question is: is there a way to know what is the originating requirement for a given planned order? (most probably, in another table than MDSM and PLAF).
Thanks in advance for your light...
Regards,
RudyHi,
You can see the ordinal planned orders in MD05 and MD06 t-codes.
for tables search in SE93 by key in MD05 and MD06 where you can get all programs, Tables related to that T-codes.
revert me if any issue..
Regards,
Ravi -
Settings for the relation of requirement type and planned order type
Dear Gurus
Where we maintain the settings for the relation of requirement type and planned order type?Actually I have maintained strategy 60 for a particular material (planning material) so the requirement type is vsev and along with that the planned order type is coming is vp i.e non convertible planned order.That is ok the system is behaving right.But nowhere I can find the setting of vp with vsev how the system is picking vp?
Regards
Sandip SarkarHi!,
That is an inbuilt sytem setting and you can't change that.
Regards,
Uday -
Bapi for sfg dependent dem,snp planned order qty, and ppds planned orde qty
Hi Gurus,
I am not much familiar with APO, so please help me,
Input details:
Field Value
Planning Version 000
Source Location * 1001 Single/Multi Value
Product * 1000061 Single/Multi Value
Production Planner * PRC Single/Multi Value
Start Date *
End Date *
o/p:
Source Location Date Semi-Finished Material Material Description SFG Dependent Demand SNP Planned Orders qty PPDS Planned order Qty Total SFG Variance due to Lot size Total SFG Variance reference to dependent demand
1001 15-Jul-10 1000041PP PRIMARY FF MILK 3% FAT 340 412 420 8 80
1001 15-Jul-10 1000041PP PRIMARY FF MILK 3% FAT
1001 15-Jul-10 1000041PP PRIMARY FF MILK 3% FAT
Is there any bapi to fetch the data as shown in o/p.
ThanksHi Phani,
Tryout the below BAPIs
IF10503 (object)
BUS10503
Regards
R. Senthil Mareeswaran. -
Availablity Check and Planned order
Hi,
In Material Master Record in MRP3 view , we have a field for "Availablity Check".
Whether it is required for MRP run ?
As we are not doing any stock transfer orders , as SD module is not implemented.
So my Question is :
1) Whether "Availablity Check"field is required for MRP run?
2) While running MD03 Transaction we see Planned order getting generated....What is the use of it and Can we avoid this Planned orders to get generated?
UtsavHi,
Availabilty check will check the available stock of the material as per its defiunition .
When the material is MRP material if there exists a requirement for the material either in the form of a sale order or planned independant require ments, SAP checks these requirements anb compares with the available qty and generates the requirements like planned orders , which in turn will get converted into either PRs or Orders depending upon the procurement type of the material in MRP view.
If your material is not related to MRP this data need not be maintained
For more details please refer to the link
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d327a44af11d182b40000e829fbfe/content.htm
and
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d326d44af11d182b40000e829fbfe/content.htm
and
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d315744af11d182b40000e829fbfe/content.htm
ansewe to your first question yes
second question:Planned order is a requirement generated for the short fall of the material when checked with the avauilability check.It can be converted into either PR or Order depending upon the procurement type.
If do not want the planned order to get generated means material need not be maintained with MRP.Means you does not want the shortfall requirement to get generated(if this is your criteria)
Please reply back if you are not satisfied with the answer.
Regards, -
Table for process order and planned order in apo
I would like to know the table for stratagy profile for particular process order and planned order.
in /sapapo/rrp3 there is one filed RECEIPT/Reqt.Element ( process order ) for this field which table it is coming and i required particular strategy profile for that process order .
Please help me the table in apo.Hi Venkat,
This value is stored in structure /SAPAPO/RRP_ORDREQ_STR
under the field name EXTRA.
You can check the details of the same in transaction se11
Regards
R. Senthil Mareeswaran. -
VSF and planned orders same day
Hello,
When running MD04, forecast (VSF) and planned orders are landing on the same day. This is causing confusion for the users. Is there a setting that's causing this to happen? We are using checking rule PP. Should we be using A instead? The planned order should actually be showing up before the forecast because we don't want the inventory to show negative from the forecast. Any help will be appreciated.
Thank you.
MZHi MZ
On the standard MRP process, the planned order basic finish date will generally match the requirement date.
Check this document which explains the scheduling in more detail:
Backward Scheduling for In-House Production - Material Requirements Planning (PP-MRP) - SAP Library
BR
Caetano -
Different between Customer requirement and Sales Order.
Hi, can any expert explain the Different between Customer requirement and Sales Order to me?
Any help would be appreciated.
Regards,
TigerHi...
The Customer sents the requirement ( Like specially manufactured products as per the customer specifications) which can be entered in the form an Inquiry. With ref. to this inquiry a quotation will be sent to the customer. The customer places an order thru document with reference to this quotation.
Now the company processes the order and manufactures the Product and delivers the Product to the Customer and recieves the payment.
Hope this clears the query
Reward points if found usefull
regards
Sajeev -
Mass update for production and planned order MRP controller
Hi Gurus,
It's anyway possible to mass update MRP controller for Production orders and Planned orders. If any please provide me step by step process.
Thanks,
B.Deethya.I feel You have changed the MRP controller in Material master and want to incorporate same in production order & plan order.
For Planned order Run MRP with delete and recreate mode, system will create a new plan order with MRP controller in Material master
For production order, Mass change is not possible, create a simple BDC or LSMW, And change the MRP controller -
Req. delivery date and plan order finish date relationship
Dear Experts,
I have a question on setting the req. delivery date and plan order finish date relationship. Now, I want the plan order finish date is one day before the req. delivery date, is it possible to set it in configuration? Please advised! Many thanks!
Regards,
Matt YimMatt,
Please use a schedule margin key(SMK) in the material master MPR2 view which has float after production defined as 1day.
If there are no SMK with that defination then you can define you own in customisation and assign the same in the material master. (SPRO--->Production ->MRP->Planning ->Scheduling and Capacity Parameters->Define Floats).
Regards,
Prasobh -
Process Orders and Planned Orders data
Hi,
I am working on extracting process order and Planned Orders data into BW. I could not find any standard DataSources available for my req, so I want to develop generic extractor. the main key figures are Actual Labor and Machine Hours, Target Labor and Machine hours.
Please help me if there are any standard datasource available or ECC tables to pull the data or any standard function modules available.
Thanks,
ReddyHi Sanath,
Thanks for your reply. I want to pull Actual Machine hours, Target Machine hours, Actual Labor hours and Target Labor hours.
these fields are not there in PLAF table.
I am looking for a table or datasource which can give those details.
Thanks,
Reddy -
Individual customer requirements and sales order requirements
Hello Gurus,
Can anybody please explain me the difference between individual customer requirements and sales order requirements.
Please clarify
Thanks,
NileshHi,
*Individual Customer Requirement *
Generally this is the material is produced against a Sales order,
They will have the Stock Categroy as E as special Stock.
They can be consumed only by the Relevant Sales order.
Mostly in Case of the MTO this is applicable.
Sales order Requirement.
This is again Sales requirements.
But it can consume any stock,
the material is not produced against any specific sales order ,
This is mostly in the MTS Scenario.
Kindly let me know your feedback.
Reg
dsk
Edited by: DSk on Dec 7, 2010 3:30 PM -
Planned Order for stock and planned order for customer requirement
Hello everybody
I want to make a different, in MD04, between the planned order for stock and the planned order created for a customer requirement
Thank for your helpHi,
True planned order are generated for both the cases but the planned order generated for sales order will have sales order number in the below column and for stock will show independent requirement. Mainly no sales order reference will be there for make to stock scenario.
Hope it will help.
Regards,
Alok Tiwari -
Hi, we have SAP Retail and we have installed a plant which manufacture some products. At this point we have configured all the production process with recipes and all the stuff related however we have experienced some troubles. We have discovered that if we create materials with MM01/MM02 we could not modify them with MM42, we have also discovered that the materials saved with MM01 cannot be replenished using WRP1. Our produced articles are FERT, ROH and HALB and what we plan to do is to run the MRP with WRP1 and generate planned orders that will be converted in production orders.
We run the WRP1 but SAP is generating us purchase requisitions but we would like this transaction to produce planned orders. Or if its posible, transform this purchase requisition in production order, which as I read it doesn't seem posible. I tried to generate a PO document with this purchase requisition and it generates a Framework purchase order (FO) and I don't know what that is.
The overall strategy is to configure with MM41/MM42 the supply source of the stores as 'Stock transfer' (2) and set procurement type 'F' so WRP1 generates purchase requisitions that eventually will be transformed as stock transfer orders which the vendor/supplier is going to be our distribution center. The DC is the place we are mounting the in-house production.
Our supplying plant has procurement type 'X' or 'E' but with this one we want WRP1 to generate planned or production orders with the replenishment requirement that includes all the requirements from the stores, so when we have all the production we could supply articles for the stores.
Is this the right approach? What should we do in this situation?
Thanks in advance
PS. We do not plan to use the MD01, MD03 or MDBT for MRP.Assign checking group in material master
Define checking rule
Define scope of check.Scope of check is to include what type of stock/Receipts/Reqmts are to be considered during ATP
Define checking control(Here you check the availability either at order creation or Release for plant/order type)
Based on the above settings when ATP is carried out,Missing parts list is determined for the order.
For planned orders additionally we can have the check against planned independent requirements. Here system only checks the dependent requirement quantities against the open planned independent requirements created for the components.Therefore, neither the ATP quantity nor the receipts or stocks are included in this availability check
Maybe you are looking for
-
When `ve downloaded the latest itunes and then i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package
-
My password doesn't work on ipod touch
i set a password on my ipod touch and it wont let me in
-
Hello to everyone.. we are two in my company , and then, When ( for example ) I run the transaction F-40 (BILL OF EXCHANGE PAYMENT) I CAN SEE THE "SGL IND" BUT when my friend run the transaction f-40 he can´t see the field " SGL IND" ANY HELP OR IDE
-
G5 powermac antenna finds wireless but time's out instantly.. help!
I'm hoping someone might be able to shed some light on something. I have a macbook using airport that picks up wireless(usually 2 networks). Unfortunately, I'm subletting paying for using the 1 of 2 networks. Anyways, the G5 I have, has the airport e
-
Best method for scrollable list of objects
I was attempting to create a list of objects in a scrollable pane with the ScrollPane object. I am having a very hard time customizing what is actually scrolling in that pane, though. By using a custom renderer class, I am able to change what it look