Dependency between two Variables in query designer filter prompt

Hi Experts,
I'm working in BW 3.5 query designer and I have two characteristics ZONE and PLANT (both are filter variables) and what I need is that when the user make a selection of one ZONE (for example Zone north) then he will be able to see in the Plan Variable the values for selection that corresponds with the Zone selected previously in the other filter variable (ZONE).
Thanks in advantage
Roberth Reyes

Hi shanthi bhaskar,
Thanks a lot for your answer.
I have one doubt about it:  with this solution that you propoused the user will be able to select the values for plant?.
I mean, the user make the selection of the value for Zone, then he wants to see the in plan´s variable the values that corresponds with this Zone for make a new selection of plan.
What happens if I need this dependency also in another variable like time variable?
Thanks  a lot

Similar Messages

  • Filter Information for two parameters in Query Designer

    Hi Gurus !!
    I have a problem for filter information for two parameters in Query Designer,
    the first parameter correspond a Ejercise-Period, the second parameter correspond
    a Compensation Date of document, both parmeters must have date less than or equal to
    to the parameter date input for screen (mm.aaaa).
    Internally the Report must filter countable information for Countable Date <= Parameter Input and
    Compensation Date of document <= Parameter Input.
    If i assign two filter parameter in Query Designer, not could realise this.
    Exist any simple form to realise this ??
    Wait for yours responses.
    Thank You.

    Hi shanthi bhaskar,
    Thanks a lot for your answer.
    I have one doubt about it:  with this solution that you propoused the user will be able to select the values for plant?.
    I mean, the user make the selection of the value for Zone, then he wants to see the in plan´s variable the values that corresponds with this Zone for make a new selection of plan.
    What happens if I need this dependency also in another variable like time variable?
    Thanks  a lot

  • Combine two reports in query designer using key figure with sap exit

    Hi experts,
    i want to combine two reports in query designer using key figure with sap exit
    in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
    to calculate due and not due in two columns
    in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
    to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
    now i have requirement like this
    not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
    or
    not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
    thank you

    Hi Dirk,
    you perhaps know my requirement,
    for the management to make used in one report,
    we have in reporting finacials Ehp3.
    Vendor Due Date Analysis - which show due, not due
    Vendor Overdue Analysis - show only due and analysis in time grid frame
    i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
    krish...

  • How to assign current date/time to a formula variable in Query Designer

    How do I assign the current date to a formula variable in Query Designer? I need to use current data in a calculation and just need the date the report was run.
    Thanks

    Hi Philip,
    There is an SAP formula variable to supply the current date in a formula. I think it is 0F_ADAY...install it from business content if you cannot see it in the query designer (formula box, under formula variables) and try using it.
    Hope this helps...

  • Fox Formula Variable In Query Designer

    Hi Experts,
    I have created 1 variable in fox formula of type VARV and i want this Variable to show in query designer while creating new Variable so that i can replace the Query Variable With Fox Formula by Using Replacement Path.
    While Creating new variable in Query Designer it is not Showing that Fox Formula variable.
    Because i want to use this in WAD While Executing the Planning Sequence.
    Is there any way we could get That Fox Formula variable in Query Designer.
    Regards
    Girish

    Hi Marc,
    While Creating Variable from Query Using Query Properties it is still not Showing That Variable in Fox Formula.
    And My Requirement was to Replace that Fox Formula Variable With Query Designer Variable.
    Please Suggest any Solution.
    Thanks
    Girish

  • Conflict with text variable on Query Designer

    Hi,
    this is the scenario:
    - On Query Designer i got two restricted key figures: K1 and K2.
    - I'm usign a manual entered variable for 0CALMONTH.
    - On K1 the sales are restricted for the selected month.
    - On K2 the sales are restricted to a range between first month of the year, and the selected month-1.
    Then on a formula i use K1+K2 and a text variable (selected month) for the name of the column. Then, when running the query, the text for the variable can't be found. There is a conflict on text variable when using 2 restricted key figures on the formula.
    How can i solve it ?
    thx

    Hi,
    I assume that your text variable is of replacement type?
    If it doesn't work you can create a new text variable of user exit type and derive its value using entered 0CALMONTH.
    Best regards,
    Eugene

  • Combine two reports in query designer

    Hi experts,
    i want to ombine two reports which are using key figure with sap exit in query designer
    in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
    to calculate due and not due in two columns
    in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
    to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
    now i have requirement like this
    not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
    or
    not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
    thank you

    Hi,
    Have you tried APD?
    You can combine them using workbook or from a multiprovider query. APD is another option. Have a look at these APD docs:
    In APD, you can take input from two queries, then combine them and load to another object (DSO).
    [Analysis Process Designer |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/413ba6c1-0d01-0010-1980-ec450e30f23c]
    [AGSAP NetWeaver 7.0 Application Process Designer|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b06c3f96-ed4f-2a10-1693-f2c76a39988f]
    Let me know where you r stuck...
    Regards,
    Ashish

  • Problem with Variable in Query Designer.

    hi all,
    we have a variable ZAMREG on characteristic AM Region, where AM region is attribute for two different master data objects mastobj1 and mastobj2, we have different infosets build on these two master data objects along with some other ODS.
    now this variable ZAMREG is visible in one of the infosets only in query designer, whereas it is not visible in the other infoset.
    what could be the problem??
    thanks,
    Rk

    Hi,
    Please check if that variable is created locally or globally. If it is a local variable in any query, it will not appear in any other query.
    In anyways, you can always create one more variable if the older one is not available. This will not make much of difference. I would suggest go ahead with creating a new variable.
    Regards,
    Yogesh

  • About variables in query designer

    what is the difference between replacement path and cmod in query designer?
    illustrate with an example?
    Regards,
    Bhavya K

    Hi,
    Replacement path:
    When you create a variable ,if you want the variable to be replaced with the value from an info object/another variable /Query/Hierarchy  then we select Replacement path
    CMOD:
    If the values for the variable are to be collected based on the ABAP logic written for the variable in CMOD then we go for CMOD selection.
    Refer the links for examples:
    http://www.sapks.com/2010/04/replacement-path-in-variable-reporting.html
    http://help.sap.com/saphelp_nw04/helpdata/en/2c/78a03c1178ad2ce10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/03/6ba03cc24efd1de10000000a114084/content.htm
    Refer to this link for scenarios on Cmod from Mr.Surendar reddy
    http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
    @ Sri
    Edited by: Sri kamesh on Mar 2, 2012 7:30 PM

  • Can't see good variables in Query Designer BW 7.0

    Hello,
    The technical name of our caracteristic variables in the Query Designer are prefixed by "OR_" or "SV_". I try to make a filter in this variables (for example: a user must be able to see only "SV_" variable) with the authorization objects S_RS_COMP and S_RS_COMP1. But this filter does not work, even if the ST01 trace shows me a Return Code = 4 for the test in the variable technical name.
    Have I made something wrong ? is it a bug ? (we are in BW 7.0 SPS9 with Sapgui 6.40 SP 19 and BEx SP 12).
    Thank you for your help

    Hi Paul,
    If iam not worng, are you asking about Infoobject level security in BW?
    If it is, the following are the steps need to be implemented:
    <u><b>Steps to Implement InfoObject Security (field-level security)</b></u>
    1) Make the InfoObject authorization-relevant.
    The Authorization Relevant setting for an InfoObject made in the InfoObject definition on the Business Explorer tab. The business needs will drive which InfoObjects should be relevant for security. Keep in mind that the people using SAP BWare running queries to help make strategic decisions on how to better run the business. The decision makers typically need to see more data on SAP BW than they would need to see in SAP R/3.
    2) Create a custom reporting authorization object.
    Since there are no reporting authorization objects provided for InfoObjects, you will have to create your own reporting authorization object for any InfoObject you decide to secure. This is done in transaction code RSSM. When creating your reporting authorization object, you select which fields to put in the authorization object from a list of authorization-relevant InfoObjects. Only InfoObjects that have been marked Authorization Relevant are eligible to be put in a reporting authorization object.
    3) Add your new authorization object to a role.
    Once you have created an new reporting authorization object and linked it to the appropriate InfoCube(s), users will need access to your reporting authorization object. You will need to manually insert your object into a role.
    4) Add a variable to the query.
    The reason the variable is required is sometimes unclear at first. If we want a  query to only provide results based on the division, for example, then the query itself needs the ability to filter specific division values. Before we can secure on division, the query must be  able to restrict data by division. The only way the query can restrict data dynamically is through a variable.
    5) Link the reporting authorization object to an InfoProvider.
    Linking your reporting authorization object to an InfoProvider is a very critical step. In this step, you will impact people currently executing queries for the InfoProvider that is now related to your reporting authorization object. This linkage forces your reporting authorization object to be checked when ANY query tied to the InfoProvider is executed.
    Hope it helps, please revert back if you are asking for something else.
    Please reward points if it is sueful.
    Thanks & Regards,
    Santosh

  • Variables in Query Designer

    Hi Friends,
        I'm using Query Designer 7.0 ... i need  to create one variable...on charecterstic... norma analyser i'm  getting  normally..
    but   in query designer... iwas create the  variable.. but  i'm  unable to  take that variable.. because.. in rows and columns.. i'm not getting those variables....
       normally in anayser  , select that  infoobject and rihght click it and  selct restrict... and we can select the variable  name..
      but in query designer  what is the procedure for taking the variables,...
    thanks
    babu

    Hi,
    have you made the variable as interval or single value.
    Becasue you have two options during selecting ther variable...if you have made your variable as interval....... it will not appear in the single value option and vice versa.
    Thanks

  • Unable to see the variable in Query Designer

    Hello Experts,
    I am running one report and it is showing me 0calday variable selection screen at run time. I am unable to see this Variable on my Query designer but when I am opening query properties its showing me in this.
    Kindly let me know where is this Variable using in my query designer ?
    Thanks,
    Anoop

    Hi Anoop,
    The variable is probably being used to restrict a key figure.
    Go to the key figures,
    Display the technical names
    Check the key figures for which the technical name is not appearing even though the key figure is not a formula.
    Here you will see one of the key figure being restricted by a variable for 0calday
    Hope this helps.
    Regards,
    Joe
    Didnt notice the question is answered :P
    Edited by: lazarus_joey on Feb 17, 2012 6:48 PM

  • Communicate between two differente JavaFX desktop design file

    I have created two JavaFX desktop design file with netbeans 6.9.1. One is the login and the other de principal menu. In java i create a object of the principal menu an just call object.setVisible(true).
    So in javafx how to call the menu principal from the login?. what should i code in the btnLoginAction??
    this is the login javafx:
    function btnLoginAction(): Void {
    function run (): Void {
    var design = Login {};
    Stage {
    title: "Main"
    scene: design.getDesignScene ()
    }

    I'm not looking for a "tutorial created especially for me".... Just perhaps someone that can copy and paste some code from a similar project that they have done so I understand how to do it.
    You could have simply put here's a tutorial for how to use TweenLite to crossfade between four pages, and here's one that will let you pass information between two .swf files. If you recently watched the tutorials then it wouldn't take long to find them (maybe you have them bookmarked) and post a couple links.
    Anyways, I just found an excellent tutorial on how to crossfade using TweenLite (found here) and an article that explains how to pass information from one .swf to another (here). It took some searching and knowing exactly what I was looking for to find them, but that's a much better answer for someone looking to do those two things than I've found here (or elsewhere for that matter).

  • Assigning System variables in query designer

    Hi all,
    My requirement is that For a field CALENDAR DAY, i Want to set the default values so that it displays the data for last seven days from the current system date by using sy-datum. This should be done without using customer exit logic.Can anyone tel me how can this be done in Bex query designer.

    Hi Imanik,
    I think using custom exit to arrive to a solution of your issue is the most efficient way as of now.
    Alternatively you can write a routine in ETL Where in you can check if  Sy-Datum - 7 <= Calday, then you can have a field Flag in Infoprovider which would be populated by X in this case. Later on in Bex you can have a filter on Calday  = X. But this scenario works only when you are doing:
    1. A full load.
    2. You are running the query on the same day you are doing this full load.
    Regards
    Raj

  • How to create two structures in query designer?

    Hi experts,
    I got the requirement to create 2 structures in query designer , as far as i concern i got to know that there will be chance to create on one for char and other for key figure,
    is their any chance to create 2 structures on key figures.
    If possible please help me in that.
    Thanks in Advance
    vas

    Hi,
    in Query at a time only 2 structures can be used, even thought there are many structures created on that infoprovider.
    [http://help.sap.com/erp2005_ehp_03/helpdata/EN/4d/e2bebb41da1d42917100471b364efa/content.htm]

Maybe you are looking for