Dependency Conflict for eDirectory Installation

Hi,
I was installing eDirectory for the first time from NOWS SBE package which includes SLES 10, OES2 SP1.
I have reached the step where I need to select the OES pattern to install. Wanting to try it out first I selected eDirectory and iManager only and their respective dependent services including SMS, LUM and Remote Manager. When I check the dependency a warning pop up that says:
There are no installable providers of xntp for pattern:novell-edirectory
I know that I can configure the ntp server once I have installed the whole thing in YaST, but I don't understand why there would be a dependency conflict on this. I have to uncheck xntp package in the eDirectory details in order to move on.
Philip

Originally Posted by smflood
On 15/02/2011 23:36, sunnywood wrote:
> I was installing eDirectory for the first time from NOWS SBE package
> which includes SLES 10, OES2 SP1.
>
> I have reached the step where I need to select the OES pattern to
> install. Wanting to try it out first I selected eDirectory and iManager
> only and their respective dependent services including SMS, LUM and
> Remote Manager. When I check the dependency a warning pop up that says:
>
>
> There are no installable providers of xntp for
> pattern:novell-edirectory
>
> I know that I can configure the ntp server once I have installed the
> whole thing in YaST, but I don't understand why there would be a
> dependency conflict on this. I have to uncheck xntp package in the
> eDirectory details in order to move on.
Since it's not clear from the above, have you already got a server up &
running that you now want to install eDirectory on or are you trying to
install NOWS SBE?
I ask because I would expect an existing NOWS SBE install to already
have eDirectory (it's kind of a key component).
HTH.
Simon
Novell Knowledge Partner (NKP)
It is very clear that he said he was installing eDirectory for the first time. What happened is that when you install the patterns with a NOWS CD, yast will throw a dependency error saying that xntp is not available for installing the eDirectory. And if you check to install xntp under the base package, another dependency error will occur.
I just choose to ignore these errors and move forward with the installation, and then go back to install the xntp at a later stage.
William

Similar Messages

Need guidance for eDirectory for GroupWise 2014 Installation

Hello,
I am installing GroupWise 2014 on Windows Server 2012. I first need to install eDirectory. This will at first be a test server for now. I don't know what to do for the eDirectory install. The documentation tells us what to do but it does not give a visual example or sample of what to put in. So, it does not make sense to me.
I am including two attachments. One attachment shows my eDirectory installation screen where I am to declare a tree and context, and to create my Admin account. Why do I keep getting a Context Format Error, and what should it look like? Please provide an example for each field shown on the screenshot example. Also, if you need a domain name, let's call it mycompany.com for now. The Windows 2012 server is in Workgroup Mode and it will not be joined to Active Directory.
Thank you.

Hi there,
Originally Posted by jhieb
I am installing GroupWise 2014 on Windows Server 2012. I first need to install eDirectory.
You are aware that with GroupWise 2014 no directory (be it eDirectory or Active directory) is not needed anymore?
Originally Posted by jhieb
This will at first be a test server for now. I don't know what to do for the eDirectory install. The documentation tells us what to do but it does not give a visual example or sample of what to put in. So, it does not make sense to me.
De GroupWise documentation does indeed not go into the eDirectory details. eDir is seen as a different product for which you can find the needed documentation in it's own section.
I'm curious though, are you wanting to install eDirectory because you will need that at a later point in time, or because you think that is required to run GroupWise 2014?
Cheers,
Willem

ERROR: The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used

As the title indicates, I'm having this error during installation. It occurs when I try to install
the "Management Studio" part of the program. I've tried a bunch of things like
copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
Please note:
Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
Any solution would be greatly appreciated.
TIA

I was installing SQLServer2014_Developer which I had just purchased as a 64bit iso download to VirtualBox Windows_10_64bit Instance that i had just created.
I got the following error about 90% through the SQLServer2014_Developer install:
>>> ===================================================================
>>> SQL Server 2014
>>> ===================================================================
>>> TITLE: Microsoft SQL Server 2014 Setup
>>> ------------------------------
>>> The following error has occurred:
>>> The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used.
>>> This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
>>> For help, click:
>>> h t t p ://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xDF039760%25401201%25401
>>> ------------------------------
A quick rerun of failed SQLServer2014_Developer install just for the Management_Tools and review of the SQLServer2014_Developer install logs
confirmed error still prelevant:
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\...
>>> ...
>>> Detailed results:
>>>   Feature:                       Management Tools - Complete
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>>
>>>   Feature:                       Management Tools - Basic
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred during the setup process of the feature.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>> ...
Reading though the many Google hits going way back AD-2000/AD-2006/AD-2011/AD-2014 for various installs including SQLserver_2008/2012 etc
I noted that in the main there were x2 common themes.
1. Problem with corruption the original download.
--- Although I had not run the download checksum
--- I had previously just installed SQLServer2014_Developer successfully, so at the minute, I was confident downloads were ok.
--- Many hits mentioned this 'Sql.cab' file and 90% of the install had been successfull -
--- I figured the chances of us all having corruption of this one files were agaianst the odds and
---   probably re-downloading it would not fix this - but I kicked a re-download off anyhow .
While it was running ...
2. Network issue when installing - some of the hits asked if could be related to Virtual drives.
--- This struck a chord
--- I had downloaded the SQLServer2014 .iso to my host PC and then copied it onto one OneDrive so I could access it within the VirtualBox_Windows_10.
--- From within the VirtualBox_Windows_10 I had then used SetupVirtualCloneDrive5450.exe to mount the OneDrive SQLServer2014 .iso and then autorun the install.
What worked for me ...
--- I decided to
--- 1. Copy the same SQLServer2014 .iso that had failed to install x2 from OneDrive to the c:\ root of the VirtualBox_Windows_10.
--- 2. Remount the same SQLServer2014 .iso from c:\ again using SetupVirtualCloneDrive5450.exe.
--- 3. Re-run the SQLServer2014 install using the repair mode.
This time the [Maintenance] [Repair] install completed with all elements showing installed successfully.
Hope this helps
Andy

[SOLVED] Dependency conflict details - hidden in new yaourt

Hi folks,
after recent upgrade of yaourt (to version 0.9.4-2) its behavior has changed. Previously, when there were a dependency conflict, it printed the reason. But now, there's only generic message. In yaourt and yaourtrc manuals isn't said anything about this feature. Besides, pacman still shows required info.
Compare pacman output:
$ sudo pacman -Su
:: Starting full system upgrade...
warning: e-modules-extra-svn: local (48190-1) is newer than community (47744-1)
warning: e_dbus-svn: local (48091-1) is newer than community (47398-1)
warning: ecore-svn: local (48064-1) is newer than community (47760-2)
warning: eet-svn: local (48204-1) is newer than community (47721-1)
warning: efreet-svn: local (48110-1) is newer than community (47737-1)
warning: eina-svn: local (48099-1) is newer than community (47741-1)
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: lib32-glibc-devel: requires lib32-glibc=2.11.1
and yaourt one (surely less logical):
$ yaourt -Su
error: failed to prepare transaction (could not satisfy dependencies)
Is it a bug or a hidden feature? If it's a feature, how it can be reversed to normal output?
P.S. The reason of conflict is quite clear (new AUR packages), but only with pacman help (
Last edited by Kosmonavt (2010-06-09 10:04:26)

Sorry, forgot to mark the topic as solved ) This way didn't help. I needed to remove lib32-glibc with -Rd, and then build lib32-glibc-devel again. Then it grabbed dependencies in a right way. Otherwise there was a circle - lib32-glibc couldn't be upgraded because dependency problem blocked upgrading, but lib32-glibc-devel wouldn't compile because of old lib32-glibc .

Plain user and systemd: dependency failed for local file system

I tried to switch to systemd, but ended up in a maintenance console (Enter root password or Ctrl-D to continue):
Enter password.
journalctl -b as suggested yields "Dependency failed for local file system".
I couldn't find a systemd troubleshooting page in the Wiki. So, can someone point me to such a page? Anyone willing to give some hints?
What I did so far: Did what https://wiki.archlinux.org/index.php/Systemd tells one should do to switch to systemd.
In the boot menu pressed e, moved one down to the line starting with "kernel", pressed e again, and appended init=/bin/systemd.
Somewhere I read that "mkinitcpio -p linux" should be issued to make systemd work. No (positive) effects.
Paul
P.S.: Shouldn't there be a topic "systemd" in "Pacman Upgrades, Packaging & AUR"?

skunktrader wrote:
poseidon wrote:In the boot menu pressed e, moved one down to the line starting with "kernel", pressed e again, and appended init=/bin/systemd.
According to the wiki you are supposed to append init=/usr/lib/systemd/systemd if you are using the "Mixed systemd/sysvinit/initscripts installation" mode. In all other configurations you should NOT have an init=.... entry since init becomes a symlink to systemd
As far as I know, the init= entry doesn't hurt anything - it just isn't necessary.
EDIT: Of course, it will hurt if the path was wrong...
Also, at least on my system, /bin/systemd symlinks to /usr/lib/systemd/systemd.
Last edited by cfr (2012-11-19 23:53:55)

Can't set up static IP with systemd: "Dependency failed for"

I bootstrapped Arch Linux into a free partition from an Ubuntu Server installation. It boots fine, but I can't seem to get the network working.
My router is weird in that the last number of the IP address has to be over 200 (so 192.168.1.[must be over 200]), so dhcpcd won't really work for me and I need to set up a static IP.
To do this, I decided to edit the systemd static IP template from this wiki page (leaving "Wireless" in the name but removing the actual wireless line, as I'm using a wired connection): <https://wiki.archlinux.org/index.php/Ne … IP_address>
Here's my modified script: <http://sprunge.us/BVRA>
However, when I run "systemctl start newnetwork [what I named the service]", I still can't ping either IP addresses or domain names. When I run "systemctl status newnetwork", I get "Dependency failed for Wireless Static IP Connectivity" and it says that the service is not running.
I have all of base and base-devel installed, so what could be the problem? It seems like the only other people who have encountered that systemd error message have had significantly different problems.
For what it's worth, I used this method to bootstrap the system: <https://wiki.archlinux.org/index.php/In … _Archlinux>
Thanks ahead of time for any help.

Welcome to the forums.
You can actually use dhcpcd to assign a static address too with the "-S" option.
My first guess for your error would be that the interface is not "eth0" (though the error message seems odd for that, yes).
Whats the output when you bring the connection up manually (description right above the wiki .service file you link)?

Microsoft.WindowsAzure.Storage already has a dependency defined for Mircosoft.Data.OData

I'm using VS2010 with .net 4.0 and have an asp.net mvc project that contains both a web role and worker role for the azure platform.
I'm trying to update my Azure.Storage package and get the following ..
I've noticed when I look at references in my project and look at the Storage it says it's vers 4.3.0.0. When I look in my packages.config (for both web and worker) it has..
I can't find any reference to OData.
When I've tried to install or update OData via he package management console it comes up with the same message of "...Storage already has a dependency defined for Microsoft.Data.OData".
I've looked around and couldn't find a posting with the same error and also this is the first time I've tried updating packages so I'm unclear on the overall process.
I have some code in my web role that apparently needs to reference the latest Storage package.
thanks,

Hi Guys,
I'm failing at Step #1 here :)
Trying uninstall using NuGet PM - the package doesn't appear.
I have a web role (the one I'm trying to update) and a worker role.
OData doesn't appear in uninstall PM or in the References.
So I looked at the worker role. OData also doesn't appear in the uninstalll PM but DOES appear in the Referrences.
Could there be some conflict between these two roles and references and packages etc?
Anyway, I then decided to try and uninstall OData using the PMC. I tried both roles and got the following..

Cannot upgrade due to dependency conflict

Hello, I wanted to upgrade my system through
pacman -Syu
However, the update procedure aborts with an error saying that Firefox-3.5 requires Xulrunner-1.9.1, below is the relevant part of the output:
resolving dependencies...
warning: dependency cycle detected:
warning: xorg-server will be installed before its nvidia-utils dependency
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: firefox-3.5: requires xulrunner=1.9.1
I have checked, and it seems that the correct version of xulrunner is installed:
$ pacman -Qi xulrunner
Name : xulrunner
Version : 1.9.1-1
URL : http://wiki.mozilla.org/XUL:Xul_Runner
Licenses : MPL GPL LGPL
Groups : None
Provides : gecko-sdk
Depends On : gtk2>=2.16.2 gcc-libs>=4.4.0 libidl2>=0.8.13 mozilla-common nss>=3.12.3 nspr>=4.8 libxt
hunspell>=1.2.8 startup-notification>=0.10 mime-types
Optional Deps : libgnomeui
Required By : firefox-3.5
Conflicts With : None
Replaces : gecko-sdk
Installed Size : 65784.00 K
Packager : Unknown Packager
Architecture : i686
Build Date : Fri 03 Jul 2009 03:46:14 PM CEST
Install Date : Fri 10 Jul 2009 06:03:42 PM CEST
Install Reason : Explicitly installed
Install Script : No
Google has given me little help in this issue, so I am asking wether someone else has already encountered this problem, and what the solution can be.

wonder wrote:
evr wrote:you shoud be able to force the update of xulrunner and then recompile firefox-3.5 with the new version. Any reason you're using that version instead of the firefox in extra?
why force it when it can do much easy. pacman -R firefox-3.5 and then pacman -Syu firefox
Hi, Wonder, thanks for the reply. That solved my problem.
Evr: I was using the AUR-version only by fault, I do not know how I have not seen that there was the same package available in the repositories as well...

Time Dependent Attributes for 0UCINSTALLA

Hello BI experts,
I have one question regardning time dependent attributes for Installation InfoObject (0UCINSTALLA) that are loaded from DSO (0UCS_DS06).
My Installation InfoObject has 3 time dependent attributes:
- ZGSP_ID
- ZPROF_CL (Profile Class)
- ZDUALFUEL (Flag for Dual Fuel installation)
EXAMPLE:
UCINSTALLA     DATEFROM     DATETO       ZGSP_ID     ZPROF_CL     ZDUALFUEL
1                        01.01.1000      31.03.2009      _A              3                        X
1                        01.04.2009      31.05.2009      _B              3                        X
1                        01.06.2009      31.12.9999      _B              3
In the DSO it is represented by following entreis:
UCINSTALLA     DATEFROM     DATETO           OPERAND      CHARVAL
1                        01.01.1000      31.03.2009      ZGSP_ID             _A
1                        01.04.2009      31.12.9999      ZGSP_ID             _B
1                        01.01.1000      31.05.2009      ZDUALFUEL         X
1                        01.06.2009      31.12.9999      ZDUALFUEL      null
1                        01.01.1000      31.12.9999      ZPROF_CL           3
The lines that contain ZGSP_ID as openard should populate ZGDS_ID field, lines with ZDUALFUEL operand populate ZDUALFUEL attribute, etc
How can I map in one transformation? I believe this has to be done in ABAP, but it would be rather difficult to manipulate dates:
- when first record is processed Start Routine has to browse for all other lines in the DSO for the same installation and split the record into 2 or more depending when other attributes are valid.
At the same time one record have to be split into multiple records (when valiity dates for three attributes don't match), and multiple records have to be merged (for intervals when all attributes are valid).
One alternative is to load these three attributes from three separate DSOs - then BI will take care of dates by itself. But this is a bit nasty solution.
Could you kindly please advise if there is any simple way of doing this logic?
Kind regards,
Roman Pikuzinski

HI,
If your data source contains dates such as start date and end date, then you can map them to 0DATEFROM and 0DATETO respectively. In that case the 0DATEFROM and 0DATETO take the values from the data source and split up.
For eg. if the start date is 05/25/2010 and end date is 12/31/2010, then now in your info provider you will have three records-
0DATEFROM 0DATETO
01/01/1900     05/24/2010
05/25/2010     12/31/2010
01/01/2011      12/31/9999
However if you do not want to map any field from the data source to these attributes then they take the system generated values - 01/01/1900 and 12/31/9999 respectively.
Hope this helps in the understanding.
Thanks,
Rahul

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Best Practices for SRM Installation !!

Hi
can someone share the best Practices for SRM Installation ?
What is the typical timeframe to install SRM on development server and as well as on the Production server ?
Appericiate the responses
Thanks,
Arvind

Hi
I don't know whether this will help you.
See these links as well.
<b>http://help.sap.com/bp_epv170/EP_US/HTML/Portals_intro.htm
http://help.sap.com/bp_scmv150/index.htm
http://help.sap.com/bp_biv170/index.htm
http://help.sap.com/bp_crmv250/CRM_DE/index.htm</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul

ALE: how do I use dependent distribution for customer and vendor addresses?

Hello SDN'ers
Hopefully someone can help me with an ALE question.
We have two ERP systems connected with ERP - Retail and AFS.
Customers and Vendors may be created in Retail, and are distributed to AFS using DEBMAS, CREMAS and ADRMAS messages.
Not all customers and vendors are required in AFS, so we have various filters set up in the Retail distribution model (BD64).
However with the filters in place, addresses were still being distributed for customers and vendors that had been filtered out.
To try and avoid this for vendors, we created a filter group for AddressOrg.SaveReplica in receiver determination. In the filter group we selected Dependent Distribution for CREMAS (Address owner object).
This works perfectly for vendors - vendor addresses are now only distributed if the vendor itself is distributed.
However I've now discovered it is preventing any customer addresses from being sent! I was surprised about this: I expected CREMAS dependency to only affect vendor addresses. Can someone tell me:
- is this how dependent distribution is designed to work? In which case can anyone offer any suffestions to achieve the filtering some other way?
- or are we doing something wrong to be getting this result?
Thanks for any help!
regards, Roger

Hi all,
as Robert suggested, I've written an exit to get round this, although I'm surprised I should need to!
What I did was to code an enhancement in function group BDBF, at the start of subroutine COMPUTE_LOGIC_EXPRESSION.
* In the case of addresses, dependencies should only be applied for the appropriate type of address
data: lwa_tbd14 type tbd14.
if P_MODEL_DATA-FTYPE = C_FTYPE_DEPENDENCY_FROM_MESTYP.
*   Dependency from Message Type.
*   Read the Address Object type
    READ TABLE P_FILTER_VALUES
                     WITH KEY OBJTYPE = 'AD_OBJTYPE'
                     BINARY SEARCH.
    if sy-subrc = 0.
*     Check if the Message Type is linked to the Address Owner Object Type
*     (Table is buffered on DB)
      select single *
        from TBD14
        into lwa_tbd14
       where MESTYP = P_MODEL_DATA-FMESTYP
         and OBJTYP = P_FILTER_VALUES-OBJVALUE.
      if sy-subrc <> 0.
*       Wrong type of address for this dependency - stop here
        P_REPLICATE = c_true.
        exit.
      else.
*       Correct address type. Standard processing continues, checking any
*       filter values set up against the Address Owner Object Type.
      endif.
    else.
*     It isn't an address - continue with standard processing
    endif.
endif.
Let me know if this helps you, or if you know of a better way to achieve the same result.
Roger

Planning of Dependent Requirements for BOM Components in Make to Order scen

Hi Friends - I want to execute a full cycle Make to Stock Scenario with Materials planning using MRP.
The scenario will include BOM Components with Routing.
The process flow I want to execute -
1. Create a Sales Order for a Finished Product (Product should have a BOM for Production)
2. Do the product Materials Planning for the Sales Order through MD50
3. Get all the dependent material requirements (both for products as Planned Order and also for BOM Components - all the BOM components should also be planned)
4. Convert Planned Order for Product to Production Order
5. Convert Planned Orders for BOM components to Purchase Requisition
6. Confirm Production Order
To execute this I have done the following
1. I have created a Material Master data for Finished Product (FERT).
2. I have assigned Item Category Group - NORM, and General Item Category group as NORM
3. I have assigned MRP Type PD in MRP 1 View and Strategy Group 20 (Make to Order Production) in MRP 3 View.
4. Now created a Universal (Type 3) BOM for the product with one material component.
5. Now also created a Routing for the Material with two operations having PP01 a control key.
6. Now created a standard sales order for the product.
7. Executed the MD50 for the Sales Order Item.
Now where do I find the BOM components for this material in the Sales Order?
After executing the planning Run MD50 I am only getting the requirements for Product only. I can't see any dependent requirements for the BOM components.
How do I make sure that the BOM components are also planned while the product is planned?
I have checked the component Stock Requirement List - there are no requirements generated from the Sales Order Product BOM.
Pls help me on this. How to do this so that the raw material components are also planned?
Thanks
Purnendu

Hi Dhaval, Sandeep, Ashok - Thanks a lot for your replies.
I have checked the Planned Order Created through Planning Run.
If I click on the Components Tab I am getting following message
No material components were determined
Message no. 61027
Diagnosis
Until now, no BOM explosion has been carried out or no BOM has been created for this material yet.
Procedure
Either explode the bill of material for this material, or
create the components manually by processing the planned order in change mode.
If I try to explode the BOM through Header Menu - Edit> Explode BOM
I am getting the same message.
If I click on the Bill of Material Tab - I am getting the same above messge.
Ashok - I have tried both the Selection Method -
Nil - Selection by Order Quant.
1 - Selection by Explosion Date
But with no effect.
Waiting for your advice.
Thanks and warm regards
Purnendu

HT201364 Hi, If I do not have to pay for free installation, why am I being asked for billing details?

Hi, If I do not have to pay for free installation, why am I being asked for billing details?
Aaron

iCloud backs up your iOS device (not your Mac) automatically. You can remove the backup:
http://help.apple.com/icloud/#/mm122d3ef202
and it will not back up again. This will not affect a backup made using iTunes. The notice you see refers to calendars, contacts, iWork documents and so on, which live on the server and are read from there by your Mac, and so will obviously disappear if you turn iCloud off altogether (which you don't need to do) or turn off Documents (which you don't need to do either).

Lenovo Settings Dependency Package for Windows 8.1 - fails on T440s

Hello everybody,
I just tried to install the Lenovo Settings Dependency Package for Windows 8.1 on my T440s and it repeatedly tells me that it fails because mfplatt.dll is missing. Has anybody experienced that and knows how to proceed in this case?
Thanks for your help

I confirm the problem on T510 too.
I have Windows 8.1 PRO N.
I installed the windows Windows6.3-KB2835517-x64.msu windows media package.
After this, I can restart Lenovo Settings Dependency Package and it works wright, without the error on MFPlat.dll
And after it works, my camera started to work correctly!
Bye

Dependency Conflict for eDirectory Installation

Similar Messages

Maybe you are looking for