Dependend Demand, did not been supplied by other location

Hello,
Would like to ask help on our issue in our product, we have a product on a location which has dep demand, and it was not been supplied by the other location which supposedly to supply it. Below are the details of the issue.
Plant on the Tlane;
From: 0001 to 0010
From: 0010 to 0020
we have dep demand on plant 0020 for 1200 PC, it must be supplied by plant 0010 but the stock on hand on it was 100, so in planing book in plant 0020 distreceipt (confirmed) 100 from 0010 and distreceipt (planned) 1100. so since plant 0010 was not enough to accomodate the depdemand of 0020, we expect that plant 0010 stock deficieny to supply the dep demand will order take stock on the next plant 0001 but in the planning book for plant 0010 no distreceipt (confirmed) and distreceipt (planned) that comes from plant 0001 for the dep demand. what are the possible root cause of this? and where should we look to.
Thanks

Hi,
1. 0001 plant is supposed to be supplying to plant 0010 some products.
This means, that procurement type of the product at location 0010 is X or F( as it is getting supplied from 0001).
Now you may first check if the souring hapening correctly from 0001 to 0010.
You may enter a forecast of say 500 for the product at lcoation 0010, and then run SNP heuristcs( or PPDS heuristcis) to see if the purchase requisition is created from 001 to 0010 or not. The Distr. receipt (planned) created must have source as 0001.
There may be blank source in the PR, and in that case you need to check IMG and set not to create PR if source not found,
2.  If demand at 0010 is getting covered from 0001 after running heuristics, then it means the supply is occuring.
     Therefore, in your scenario, you need to check if heuristics run is properly occuring at 0010 to create PR to source from 0001.
Regards
Datta
Regards
Datta

Similar Messages

  • MDW Disk Usage for Database Report Error - A data source has not been supplied for the data source DS_TraceEvents

    Hello,
    On the MDW Disk Usage Collection Set report, I get the following error when I click on a database hyperlink.
    A data source has not been supplied for the data source DS_TraceEvents
    SQL profiler shows the following SQL statements are executed (I've replaced the database name with databaseX)
    1. exec sp_executesql N'SELECT
    dtb.name AS [Name]
    FROM
    master.sys.databases AS dtb
    WHERE
    (dtb.name=@_msparam_0)',N'@_msparam_0 nvarchar(4000)',@_msparam_0=N'databaseX'
    this returns zero rows as databaseX does not exist on my MDW central server, but is a database on a target server (i.e. one that is being monitored and uploaded into the MDW central server).
    2. USE [datatbaseX]
    this produces the following error:
    Msg 911, Level 16, State 1, Line 1
    Database 'databaseX' does not exist. Make sure that the name is entered correctly.
    why is the report looking for the database on my server?
    thanks
    Jag
    Environment: MDW (Management Data Warehouse) on SQL 2008 R2

    Hi Jag,
    Based on my test, while this database is offline, we will encounter this issue. This is because that while we click the certain database in “Disk Usage Collection
    Set” report, it will query some information with that certain database. If this database is offline, we will not access this database to acquire related information and generates this error.
    Therefore I recommend that you check the status of this database by using this system view:
    sys.databases. If it is not online, please execute
    the following statements in a new window to make this database to be online:
    USE master
    GO
    ALTER DATABASE <database name> SET ONLINE
    GO
    If anything is unclear, please let me know.
    Regards,
    Tom Li

  • My iPhone 5S is using 2.5GBs of storage for the camera roll.  I deleted all but 190 photos and this did not change.  My other devices cannot backup to iCloud due to the volume on my iPhone.  Any ideas?

    My iPhone 5S is using 2.5GBs of storage for the camera roll.  I deleted all but 190 photos and this did not change.  My other devices cannot backup to iCloud due to the volume on my iPhone.  Any ideas?

    Try turning off the Camera Roll option in Settings>iCloud>Backup & Storage>Manage Storage>Your device. Then turn it back on again.
    Cheers,
    GB

  • I activated home sharing but after syncing, the cd's Tunes which I had burned on my PC, did not share to my other devices but instead the cloud symbol has an error message next to each song not purchased through iTunes.

    I activated iTunes Match but the songs in my iTunes library that were not purchased through iTunes did not share to my other devices. instead there is a cloud with an exclaimation point nnext to eahc one and it says errror when you mouse over the cloud.  How do I get these songs to share on iTuens Match?

    Well, now I feel like a real dope. I restarted iTunes (can't believe I didn't do that before) and now the TV's see the share, and the iPhone see it too (I assume the iPad sees it but I have not checked yet).

  • HT201343 I tried setting sound to apple tv before mirroring and it did not work. Any other suggestions?

    I tried the solution of selecting sound in System Preferences before turning on mirroring and it did not work. Any other settings I need to worry about?

    You can only update an app from the AppleID that was used to purchase it.

  • HT4061 i had my ipad stolen on monday. I set it to remote wipe when next switched on. It came on yesterday and was wiped, but it did not tell me its last location. How can I find this out.

    i had my ipad stolen. I set it to remote wipe when next switched on. It came on yesterday and was wiped, but it did not tell me its last location. How can I find this out.

    I beive that its too late now if the iPad has been wiped. The means of communicating with the device has been reset so there's no talking to it now.

  • HT1937 I had to change my password and now I can not update the apps on my phone. I tried the suggestions on here and it did not work. Any other suggestions

    I had to change my password and now my cell phone will not update apps. I tried signing out and then signing in with the new one. It did not work. Please help

    You can only update an app from the AppleID that was used to purchase it.

  • CS2 Illustrator did not install but the other applications did.

    I bought CS2 on Amazon second hand, installed it, and only got Illustrator. Phoned Adobe and was told this happened because it's still registered to someone else. A week and many hours of faff later, it is finally registered to me. I uninstalled CS2 files, and the computer counted down percentage of uninstallation, and confirmed that it had been uninstalled. So I started again. All loaded beautifully - except Illustator is missing. Nowhere to be found. I am frightened to reinstall in case the rest disappears now! What do I do?  I know my computer is up to the job, because it has had all 3 applications loaded on it (and working) at times, but I cannot seem to get all three applications on it at the same time! Help!

    What operating system are you running? This info is crucial in determining what could be going wrong. For the record, I personally found the CS2 installation the worst of the CS series.
    Ian

  • I uploaded a document from my PC to one of my iPads using the Cloud and Pages.  It appeared on both my iPads as it should have.  But when I deleted that document from one of my iPads, it did not delete from the other iPad.  Anyone know why?

    I have no other info to add other than it is my understanding that if both my iPads are connected through the Cloud, if I delete a document from one of them, it should automatically be deleted off the other one.  Thanks

    Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant.  If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.

  • I can ping and browse shares on time capsule, but not make backups from other location connected with MPLS?

    Hi
    We have just bought an Apple Time Capsule with 3TB of storage, to make backups of our users macbooks. It works fine at the office1 where it is located, but from our other office, time machine backup doesn't work. The offices are connected through a 100Mbit MPLS connection with no firewall - everybody in office1 can see everything at office2, and vice versa. The users at office2 can ping the time capsule, and they can also browse network shares on it.
    The only thing that doesn't work, are time machine backups.
    The only difrence I can imagine is, that the the machines at office2 are on a different IP subnet, that is being routed through the MPLS connection.
    Is there a problem with the AFP perhaps? SMB and ping works fine, my guess is, that AFP doesn't like the fact that the clients are on a different subnet than the time capsule. But what can be done about this?
    Best regards
    Peter Bak

    Thanks Linc ......you were right on the money. Your help has been awsome. I spent 3 hours last night doing stuff with out any solutions. May I ask you another question if you have the time and patience please. My orriginal setup was 2 windows laptops with XP on them connected with a timecapsule attached to a router. Hence the time capsule made a wireless signal aswell as being an external hard drive. On one of the laptops i have a printer attached to it which was shared so that the other computer could print documents through the network however the computer attached to the printer has to be on. Do you know what i have to do so these new 2 mac book pros can print to that printer? Thanks again for all your previous help. Nick

  • I believe some how some way my iPhone or appleID has been hacked into.  My iPhone sent 3 iMessages out that I did not type or send - 2 while I was sleeping and one while I was in mid imessage conversation.  Please help if you know anything about this!

    I believe that my iPhone or apple ID has been hacked into.  Three imessages were sent from my phone that I did not type or send - two while I was asleep at 1:15am and in the morning during an iMessage conversation.  These messages were to my boyfriend about my boss.  Apple and AT&amp;T have been somewhat helpful but both are pointing fingers at the others saying they cannot track the message or see if my personal information has been compromised.  I feel extremely violated because this hacker knows who my boyfriend is and who my boss is and I just started this job two weeks ago!  I am about to go to the police because this person is trying to taint my good reputation and destroy my relationships at work and in my personal life.  Does anyone have any incite on how this could be done and is there any way to trace where those three iMessages were generated from??

    No I have my own iPhone iPad and MacBook  so everything is set up on devices that are mine and as far as I know I never connected to anyone else's device and logged with my apple ID.  But are you saying it is possible for someone to have obtained my apple ID and send an iMessage from their device with my contact information so it looks like it came directly from me?  It's crazy I looked down at my iPhone and saw this message had just been sent that I did not type or send

  • I recently purchased songs and some of them did not download to my computer but just a few seconds, all the song did not download, while other songs were perfectly fine.  How do I get the full songs downloaded now?

    Some of my recently purchased songs did not fully download while other songs did.  Has anyone else had a problem like this?  Did I do something wrong?  I purchased all the same way, but only received a parcel song on about half of my purchases.  Help.....

    Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, close and then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
    tt2

  • Another one with the "did not respond" error

    Hi all,
    We've been successfully video chatting with my parents using iChat AV for years on our old machine - an 800 MHz G4 iMac. We just upgraded to a new iMac with the Intel Core Duo processor, and now are getting the "did not respond" error that others are describing. Because nothing else has changed in the setup at either end other than our new machine, the problem must lie in the new iMac. After perusing this forum and Ralph's site, I tried setting the QuickTime streaming speed to 1.5 Mbps rather than "automatic," and turned off IPv6, but to no avail.
    Any other suggestions?
    Thanks in advance!
    The Rosses

    Hi rossma,
    If you go to System Preferences > Network and then
    Select the Connection method in the second drop
    down.
    Then the TCP/IP tab
    Does this say Using DHCP ?
    Does it give you an IP of something close to
    192.168.1.100 ?
    Yes.
    Does it list the "router" IP as being 192.168.1.1 ?
    Yes.
    If you connect the computer to the Toshiba what IP do
    you get then ?
    Does it match the same IP as when you go here
    http://myip.dk/
    Well, I didn't try disconnecting the iMac from the Linksys and hooking it up directly to the cable modem (would require wrestling with a nest of cables), but I can see the IP address that the Outside World sees in the Linksys configuration page, and that matches what the webpage you mentioned says. if you need me to connect it directly, let me know and I'll try that.
    If it does then the Toshiba is in Bridge mode and the
    Linksys may be doing the ISP login
    I can not see the Toshiba in this list
    http://portforward.com/routers.htm which is why I
    think it is not routing and is in Bridge mode. (this
    will mean all the ports are open in it).
    If all ports are open, then the cable modem shouldn't be the problem, right?
    As far as Quicktime is concerned it might pay to
    check the Font Book and see if Helvetica is active.
    Huh? This is the first I've heard of Helvetica being problematic! It's active at the moment - should I disable it?
    Thanks for all your patience and effort on my behalf!

  • Random file uploads fail - LDS (LDS did not complete request)

    Hello,
    It's happening on about 15% of our uploads to FCServer where we see the error, ""LDS (LDS did not complete request)". It's happening on both FCP project uploads and MOVs'.
    Thanks!

    i've been getting the error while trying to write XML
    in the job detail i don't get a Destination Filename:, then STATUS: FAIL
    and at the bottom:
    ERROR: E_COM Error in comms channel to LDS (LDS did not complete request)

  • Bug: Copy did not complete normally...

    If you open the Local History of a file that you have been working on for a few hours, you'll get this error once you try to copy from it:
    "Copy" did not complete normally.  Please see the log for more information.
    java.lang.NullPointerException
    PS: I've already reported another (and more major) bug in the bug-tracker but was asked on Twitter by @dscottcastle to post this one here. You really should add Flash Builder 4.7 to the possible tags in the adobe bug tracker or you will have littlle effect from a public beta...
    J

    Close Flash Builder 4 beta 2
    Delete this folder in your workspace:
    \.metadata\.plugins\com.adobe.flexbuilder.codemodel.
    Relaunch Flash Builder 4 beta 2
    from:
    http://www.themorphicgroup.com/blog/2009/10/27/content-assist-did-not-complete-normally/

Maybe you are looking for