Dependent reservation doesn't create - MD04

Hi SAP gurus,
I have problem with view of dependent reservation material in MD04. I have production order, production order is realesed. For this order I need for example 4pcs of carton. Problem is, that I can´t see this request in MD04.
Thanks
Lukas

Hi,
thanks for your raction. I try to specify problem better.
I have production order for material 4-000-653, one of the compoment is 1-002-095. This component is for a lot of materials. When I look at MD04 for this component I can´t see any reservation to material 4-000-653, but I can see reservation of this component for another materials.
Lukas

Similar Messages

How to create "Dependent reservation"?

Hi,
Could you tell me how to create "Dependent reservation", please? Thanks in advance.
PS: the MRP element of the record shows "OrdRes" in MD04 screen.
Best regards
Lily

Hi,
When you create Production order for Parent material (CO01) , dependent reservation will be created for Components automatically. If u select the Dep reservation it will show the Parent material production Order Number( Pegged requirement) (Md04).
or U can create reservation manually at MB21
Pradeep

Dependent reservation created instead of planned order

Hello Experts,
After MRP run for some material only dependent reservation created instead of planned order?
What would be the problem?

Stocks must be available on date of requirement.

Error in VT04 - Doesn't create Shipments

Error in VT04 - Doesn't create Shipments
We have this function module that automatically creates delivery and shipment base from the Goods Receipt.
The problem is it doesn't createe shipment document because the delivery doc doesn't exists.
Upop debugging, the delivery has been created. And appends the delivery number into TVARV table (found in PERFORM CHANGE_VARIANT_VALUES). Then there's this code that it doesn't recognized the delivery that it was created.
PERFORM CHANGE_VARIANT_VALUES USING VBKOK-VBELN_VL.
      SET UPDATE TASK LOCAL.
      SUBMIT RV56TRGN WITH P_OUT EQ C_X
                     WITH V_PSEL EQ 'RV56LFSL'
                     WITH V_PSP0 EQ 'RV56TRSP'
                     WITH V_PTR0 EQ ZVXXAUTOGRDN-DATA_OPTS
               AND RETURN EXPORTING LIST TO MEMORY.
      COMMIT WORK AND WAIT.
Though in the production this program works. But in QA server it doesn't. I am not sure if this is the effect of a Unicode issue also.
Help me guys.. I just couldn't find in program RV56TRGN on how the values will get from TVARV.
I am not familiar with the command SET UPDATE TASK LOCAL. If this is related to Memory storage that might get the last value.
Points will be given for the helpful ideas. Thanks!

Hi,
The service contracts guide also says to run 'Installed Base Interface' concurrent program for shippable items. Even after running this concurrent program no contracts is created.
Any step to be done further??
Regards,
Nithya

QSynth doesn't create jack port.

I have a problem with QSynth - it doesn't create jack port, so i can't connect it to output. When i run fluidsynth from console it works properly - it creates output, I connect it to "system" port using QJackCtl and i can hear midi sound, but i really ned QSynth. Please help me.
Messages from QSynth:
15:11:57.027 Qsynth1: Creating synthesizer engine...
15:11:57.058 Qsynth1: Loading soundfont: "/usr/share/soundfonts/fluidr3/FluidR3GM.SF2" (bank offset 0)...
15:11:57.281 Qsynth1: Creating audio driver (jack)...
15:11:57.294 Qsynth1: Creating MIDI router (alsa_seq)...
15:11:57.295 Qsynth1: Creating MIDI driver (alsa_seq)...
15:11:57.296 Qsynth1: Creating MIDI player...
15:11:57.298 Qsynth1: Synthesizer engine started.
15:11:57.298 Qsynth1: fluid_synth_set_gain(0.97)
15:11:57.299 Qsynth1: fluid_synth_set_reverb(0.2,0.5,10,0.1)
15:11:57.299 Qsynth1: fluid_synth_set_chorus(3,1,0.3,8,0)
fluidsynth: warning: Failed to pin the sample data to RAM; swapping is possible.
fluidsynth: prog 0 0 0
fluidsynth: prog 1 0 0
//............. some lines like above and bellow
fluidsynth: prog 14 0 14
fluidsynth: prog 15 0 15
zombified - calling shutdown handler
fluidsynth: error: Help! Lost the connection to the JACK server
Last edited by dawidmt (2011-08-26 13:20:17)

Sorry about the necro, but did you ever figure this out? I'm running into the same issue. I think *something* is being written because when I do "efibootmgr -c blahblah", and then I do an efibootmgr -v afterward, I can see the device path that shows up in the verbose options. Then, when I reboot, I don't see the new boot option in the menu, and when I check again via a livecd (which boots via UEFI, by the way), efibootmgr -v shows "Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)" in the extra info next to the boot option I had previously created. That vendor and GUID seem to show up when there's no path, as I've googled it and have seen similar readouts that imply such based on the context of where I saw them.
Anyway, help.
Thanks.
-TJ

Reservation not getting created from shopping cart for stores order.

Hi experts,
Reservation not getting created from shopping cart for stores order,process used is some custom BADI.Extended classic scenario is the procrss .
Please help me
Thanks in advance.

Hello,
please check below wiki:
Determination of the follow-on document type
Regards.
Laurent.

Why background job sometimes doesn't create something while manually we can

Hi friends,
Can you help me to understand why Background job doesn't create Outbound Delivery where as manually we can create using VL10B with parameters same as that of the background job variant? The background job calls the program for VL10B.
Thanks,
Rana

I have a similar problem on a SAP IS RETAIL site with VL10B.
I have reviewed several notes and the solution should be in using VL10BATCH with a list profile created via VL10CUA.
The list profile should be a copy of :
5002 Run purchase orders in background
into Z002 purchase orders in background
and specify that the F CODE PROFILE is 5001 RUN DELIVERY LIST
The create a variant from VL10BATCH and with the USER ROLE : Z002 (just created above).
Let me know if this helps you.
Sincerely,
Richard ITHIER
Sydney

Adobe Reader XI (11.0.08) doesn't create thumbnail (bitmap) using Microsoft Interface IExtractImage -- Extract on Windows Server 2008 R2, when exe to generate thumbnail is launched from Windows service.

Adobe Reader XI (11.0.08) doesn't create thumbnail (bitmap) using Microsoft Interface IExtractImage --> Extract on Windows Server 2008 R2, when exe to generate thumbnail is launched from Windows service.
But if exe is launched as standalone, then interface IExtractImage --> Extract, gives Bitmap to generate thumbnail of PDF document.
Above problem occurs only for PDF documents, if we tried same with other software like CAD -CATIA it works without any problem.
Is there any security concerns form PDF side, which doesn't allow to generate Bitmaps, if exe to generate it is launched form Windows service.

It might be deliberate, Acrobat and Reader software is not intended to run in a service environment.

WTK 2.5 doesn't create the jar file

Please help me! I'm using wtk2.5 and it's doesn't creates the jar file.
The classes are created and the program run's in the test phone, but the jar file is not created...
Any ideas...?
Please help!
Thank you
Message was edited by:
tprimus83

I found something.
"simply building does not create a package. Try Project -> Package -> create package.
hth
Kay "
Thank you Kay i woul'd try it

/etc/crypttab doesn't create /dev/mapper/swap

I'm not lucky with encryption these days: keyfile on USB stick doesn't work ( http://bbs.archlinux.org/viewtopic.php?id=52507 ), so revert to the passphrase thing.
I had swap encryption working using the old rc.local way etc. now there's a new way... "SWAP" keyword inside /etc/crypttab and no rc.local changes, wonderful right? Wrong. It doesn't work, if you put (example)
swap /dev/sda3 SWAP -c aes-xts-plain -h whirlpool -s 512
inside /etc/crypttab and reboot, it doesn't create any /dev/mapper/swap device (so it can't swapon).
Where's the issue?
Last edited by ekerazha (2008-08-20 13:22:35)

dw wrote:
hi ekerazha.
i am playing around with system encryption a bit lately and i am experiencing exactly the same. my question. were you able to solve this?
No... maybe reverting to the "old" way (no SWAP keyword etc.)
Last edited by ekerazha (2008-08-23 16:36:41)

Offset Path doesn't create a separate path

Mac CS6
Seems like my Illustrator is bugging out. When I apply offset path to the compound object Illustrator doesn't create a separate path for me, but both the offset and original somehow bundle together:
https://www.dropbox.com/s/xiu3xqcictx0ku0/Offset_problem_1.png
I'm trying to create an effect like this tutorial on youtube. But since offset path doesn't create a separate path, I can't duplicate the same effect.
Any clue on how to fix this would be appreciated.

Did you use the Object>Path method or Effects>Path method? Here's the difference

LR4.1 doesn´t create a psd

when i use the external editor function, LR4.1 doesn´t create a psd-file. CS5 will directly open the DNG.
With LR4.0 i didn´t have this problem. Anyone here to solve this problem?
(VISTA Ultimate)

yes i did.
the setting is PSD, 16 bit, Adobe RGB, 96 dpi
I took settings to the 2nd externel and chose CS5 (32bit) with the same features.
Also i testest it with setting to TIF. Nothing works.
If i use VIVEZA2 as external, it works and creat a PSD.
Tom

DPM doesn't create any recovery Point for VMs

Hello There,
i am running DPM2010 and i have created a protection group which contains VMs and System State data as you can see in the screen below the details.
The problem is DPM doesn't create any recovery points and i don't see any errors as well when i create short term recovery point manually it works.
This is all tape based protection, please suggest.
Regards,
Maqsood
Maqsood Mohammed Senior Systems Engineer MCITP-Enterprise Admin & ITILv3 Foundation Certified

Hi,
Please read this BLOG and see if you can find the problem associated with the SQ agent.
How to troubleshoot scheduled backup job
failures in DPM 2012
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Scheduler doesn't create Jobs

Hello folks!
We have scheduled some reports with BI Publisher Scheduler in our Development Enviroment and works very fine. But when we passed that reports to Prod Enviroment, BI Publisher scheduler doesn't create any Job (verified in Report Job History and XMLP/QRTZ tables in Database Schema that isn't any Job created). There isn't any error, exception or message, only scheduler doesn't create Jobs.
Any idea, solution or way to find any trail about that problem?
Thanks for your preciated time spent in our issue.
Best Regards,
Martín

I am also facing same issue with BI Publisher Scheduler but showing below mentioned error while creating new job.
Error
"Job submission failed : Error occurred while scheduling the job. org.quartz.ObjectAlreadyExistsException: Unable to store Job with name: '-1' and group: 'weblogic', because one already exists with this identification."
Cheers.
Vishal

Build doesn't create WSP package.

Hi,
Any ideas what to check when VS2012 build doesn't create WSP package? No errors received while building. Publish works normally.
99% sure that at some point simply building a solution created WSP package to output folder.

Hi,
By design, if you build the SharePoint project, it just generate
.dll and .pdb file in the output folder.
In Visual Studio 2010 there is a special option "Package" in context menu of program project to generate
.wsp file.
Nowadays, there is no such in Visual Studio 2012, but we can use Publish
instead.
Here is another solution that we can create a Solution Package for a single SharePoint 2013 project.
http://visualstudiogallery.msdn.microsoft.com/b736142a-525d-44c1-b243-b45d9c0e42f3
More information:
http://networkedblogs.com/A85Gc
Best Regards
Dennis Guo
TechNet Community Support

Dependent reservation doesn't create - MD04

Similar Messages

Maybe you are looking for