Dependent search fields

Hi,
In component BP_HEAD_SEARCH I need to make an own search field dependent from an standard field.
What method I can use to catch the changing of the field value. I didn't find any method get called by changing a value.
And how I can fill the valuehelp of my new created field at after the changing of the other field?
Any ideas?
Best regards
Andreas

Hi Saumya,
I tried to implement the wiki you sent.
The called outbound plug is not called.
This is my coding:
CASE <field>-fieldname.
   WHEN 'ZZCONC_KEY'.
         data: rv_valuehelp_descriptor type ref to cl_bsp_wd_valuehelp_navdescr.
         CREATE OBJECT rv_valuehelp_descriptor
           TYPE
              cl_bsp_wd_valuehelp_navdescr
           EXPORTING
              iv_outbound_plug = 'F4_ZZCONC_KEY'. "#EC NOTEXT
Any idea why the outbound plug is not called?
Best regards,
Andreas

Similar Messages

How to set focus on specific search field in FPM's search guibb?

Is there any way to set the input focus to a specifc search field in an FPM's search guibb? I found that there is a godd way for forms by using the IO_EXTENDED_CTRL object in the GET_DATA function. But it seems that there is no corresponding way to do for search forms. Any other idea?
Best regards,
Thomas

Hello Venkatesh. Yes that code does work. First I tried it on a table cell that was already rendered and it did work. The next time I tried it on a table row that was being added and it did not work there. So I added an on after rendering function for the table and added that code there. That did not work until I added a delay (timeout) to do a context switch before calling the focus and that worked.
Once last thing though sometimes when I call focus on an input field (actually in a table row cell) if the field has text in it already the flashing cursor is at the beginning of the text and other times it is at the end of the text (which is the desired way). It depends on where I click in the row. Is there anyway to make sure the flashing cursor is at the end of the text when the focus is applied to a field that contains text?

Creating a search field on a view

Hello experts,
Today is my fiirst day using oracle forms and i have been sitting with it for 5 hrs now and there is no joy at all on my side,
I have to create a window that is going to enable me to perform some tasks.
First things first, i have created a view out of 2 tables and managed to display my view on my window :)
Now i have created 2 datablocks.
1st datablock is going to display data from my view.
2nd datablock is going to enable me to update one of the tables that i used to create that view.
in my first datablock i have to create a search field with a search button, i have manage to get the text field and the button but now i can't seem to find how to link that with my view.
plzzzz helpppp
Thank you

Actually if your data block depends on the database object then F7 and F8 should work. And the code you showed
we can you but this one is alternative of F7 and F8 and normally we use when we try to open another from from the
existing form. or if you want to write this code in your exist form then you can write in WHEN BUTTON PRESSED
trigger. But it will work only for one field because you created only one search field.
And also answer the previous post? So, can find the better solution then this.
-Ammad

How to remember what I search for in Interactive Report's search field

Hi.
I made Cro-Eng dictionary using Interactive Report by joining two table columns of Croatian and English word. Now I want to remember every word that I write in the search field of Interactive Report by filling the table SEARCHEDWORDS which has two columns WORD and DATE, so that I can see all the searches that were made and the date they were made. Is it possible? Do I need triggers for that, or do I do it through processes in edit page of Interactive report? something like INSERT INTO SEARCHEDWORDS (WORD, DATE)
VALUES (?SOMETHING?, SYSDATE);

Hi Tihomir,
The last step is Javascript so you'll need to create an HTML region and wrap the code in <script> tags. The Javascript basically overwrites the default actions to refresh the IR report. Instead it says to call a custom function which first logs the search request then makes a request to refresh the IR region.
jQuery is used to help manipulate these links. jQuery is a javascript library. You can read more about it at jquery.com. To see more examples, Insum has an excellent jQuery for APEX page: http://apex.oracle.com/pls/otn/f?p=987654321:home:0
If you have multiple IR pages then you can include the code on Page 0 or on each of those pages. Since you're trying to log information for several different IR you may want to add some extra columns to your log table to include which IR the searches belong to. You'll also need to update your application process and (depending on your requirements) some of the javascript code.
Martin
[http://apex-smb.blogspot.com/]

I cannot type anything into the Google search field; each character typed brings up a list of suggestions below the search field, but nothing appears in the search field itself.

When in Mozilla and I bring up Google, the search field appears but the cursor does not blink as it ordinarily would do. When I try to type a search string it doesn't appear in the search field, instead a list of suggestions appear depending on the character(s)

Solved: This was caused by replacing the SegoeUI (Regular) true-type font. I have no idea what process or why that font was deleted, but finding the segoeui.ttf file on another Windows machine, emailing it to myself, saving it to disk, then right-clicking and choosing "Install" fixed this problem.

In portal after clicking the search field of table UI popup is not coming

Hi Experts,
I have a problem in portal . In "RecordWorkingTime" when I select any search field of this table Ui it is refreshing for unlimited time period and the pop up window is not coming .
Can you suggest me any possible solution for this strange problem ?
Regards,
Sumana
Edited by: sumana05 on Mar 9, 2012 10:58 AM

Hi
In addition to this, we also put the trace on the application. During the trace analysis we found that the RFC: HRXSS_CAT_WD_F4_SELFLD_DEFAULT doesn't seem to get called.
Not sure what could be the issue.

Issue with custom search fields in agent inbox

Hi All,
I am working on CRM agent inbox 7.0. The issue I am facing is like this:
I have added custom search fields in inbox. When give a combination of standard search field and custom search field, the result is only based on standard field. The value of custom field is not considered.
Is this a standard behaviour? Are standard fields given higher priority that custom fields?
Any pointers on this would be highly helpful.
Thanks,
Narendra

Hi Naren,
Did you add custom field using AET? If yes then while adding custom field using AET did you make it search and result relevant?
There is nothing like priority in standard SAP fields and custom fields.
Please let me know so that I can further help you.
Thanks,
Bhushan

I return my cursor to the search field, it selects the entire entry. I have to click a second time to deselect in order to hit return and send the search. Sometimes I have to click on the type several times to select one word or an insertion point. How do

It only does it in the Google search field. It seems to me I set Firefox to select chunks of type and now don't know how to change it back. Any suggestions?

It only does it in the Google search field. It seems to me I set Firefox to select chunks of type and now don't know how to change it back. Any suggestions?

Suddenly can't enter anything in some blank search fields, dropdowns not working, and javascript popups freeze randomly. WTH?

I noticed a few random things not working on my computer in the last month or so, and I tried everything I can think of to figure out what it is...still haven't figured it out yet. Some examples - I was on ebay, and the tracking number I clicked on from the "My ebay" page popped open a javascript window, but then froze the page so I had to close the whole tab. Then on Grooveshark, the main page comes up, but if I type anything in the search field, I can see what I'm typing, but at the same time, I can still see their default search message. If I try to enter something and hit search, it just gives me the warning that I'm being asked if I want to leave the page, it never searches. There are a few other times I can think of that I tried to use a dropdown menu, and they don't always work - they just look like they're being clicked, but nothing shows. Also not sure if this is related or not, but it bears mentioning - I tried to install Freecorder, and even though I tried both the toolbar and just the button for installation options, it doesn't show up for me to use it, and that's with adblock plus disabled. Also not positive my last update of Adobe Flash took, even though I downloaded it.
I have adblock plus, but I've had that for years now, and it's never caused a problem or stopped me from seeing anything I actually wanted to see. My system was pretty bada** before this, and it's frustrating that suddenly I can't go everywhere and do everything I could before. Why is it doing this, and can I fix it??

Meh...if I had started here instead of trying to research this randomly, I would have fixed the problem weeks ago. I just did a Firefox reset, and tried all the things I mentioned in the OP, and it all seems to work fine now. Well, aside from Freecorder, but I can make that work another way, I guess. Anyway, Firefox reset = solution. Yay!

New itunes is destroying my life. It won't allow me to search. As soon as I type a single key in the search field. It freezes, then crashes. WHY??????

It won't allow me to search. As soon as I type a single key in the search field. It freezes, then crashes. WHY??????

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

How can I get a search field?

In fewer times there was a field for adress and one for searching. Since the last modification there is no searching field. I like this field. How can i get it back?
Thanks for help.

Open the Customize window and set which toolbar items to display.
*"3-bar" Firefox menu button > Customize
*if missing items are in the Customize palette then drag them back from the Customize window on the toolbar
*if you do not see an item on a toolbar and in the Customize palette then click the Restore Defaults button to restore the default toolbar setup
*https://support.mozilla.org/kb/customize-firefox-controls-buttons-and-toolbars
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How can i make a search field in my app using applescript?

I am making an app and i would like to learn how can i add a search field, that will search the content of a window. BTW i am using xcode and applescript

Like pretty much all of the Cocoa documentation you will need to convert from Objective-C, but take a look at the Search Fields documentation.

How can I get a query in the search field to open in a new tab or new window from the current window?

How can I get a query in the search field to open in a new tab or new window from the current window?

If you are searching via the Search Bar on the Navigation Toolbar, this preference can be changed to have searches there open in a Tab.
Type '''about:config''' in the Address Bar and hit Enter. Then answer "I'll be careful". Type this pref in the Search at the top.
'''browser.search.openintab''' = double-click to toggle to '''true'''

How to get google back in search field

how to get google back in search field of Safari

Safari 6
URL address bar and Google search are unified and is called Smart search field.
When you search with Google "Google search" will appear.
There is no more a separate Google search field.
Prior versions of Safari
Click the "View" menu in the Safari menu bar and select "Customize Toolbar".
From the dropdown drag the default set into the Toolbar.

Dependent search fields

Similar Messages

Maybe you are looking for