Deploy an Application and its components

I am using Weblogic 6.1, sp1, with Win2k.
I am trying to deploy my application (myapp.ear) which has 3 components,
2 webapp comp and an ejb component.
I have the Myapp.ear file in <weblogic home>/config/baiju/application
directory
and the components are listed in the config.xml file as follows :
<Application Deployed="true" Name="Baiju-WebLogic"
Path=".\config\mydomain\applications\Baiju-WebLogic.ear">
<WebAppComponent Name="Baiju-WebLogic-Backoffice"
Targets="Baiju" URI="Baiju-WebLogic-Backoffice.war"/>
<EJBComponent Name="Baiju-WebLogic-Ejb"
Targets="Baiju" URI="Baiju-WebLogic-Ejb.jar"/>
<WebAppComponent Name="Baiju-WebLogic-Store"
Targets="Baiju" URI="Baiju-WebLogic-Store.war"/>
</Application>
The problem is, when I start the Server it does not deploy the application
"Baiju", if I go to admin console
I can see the application as deployed ("its checked") and also its 3
components, but I am not able to access the pages.
Also this problem is not consistent, it sometimes work, with absolutely no
change made to anything, I just re-start the server.
I have my server running in Production Mode.
(-Dweblogic.ProductionModeEnabled=true)
Any help is appreciated,
Thanks.
Baiju.

have a very similar situation in which an ear file deployed thru' the
console is NOT getting picked up on restart. The file has been copied to
config/mydomain/applications but does NOT show up in the .wlnotdelete
directory when I restart the server. When I deployed the ear file initially,
it was all ok. The home interfaces showed up in the JNDI treee but on
restart, everything disappeared. It is running in the production mode.
BTW everything works fine when I deploy using a JAR.
"Baiju Gajjar" <[email protected]> wrote in message
news:[email protected]...
Hi Mihir,
I am not deloying the application through the console, I have an ear file
which I have in
<Weblogic home>\config\<myapp>\applications
folder as Baiju-WebLogic.ear file. If I start the server in developmentmode
it is able to deploy
it properly. It should be able to deploy even in production mode as it is
listed in the config.xml
file. Also this deployment is not consistent, it some does deploy it and
some times it doesn't.
Thanks,
Baiju.
"Mihir Kulkarni" <[email protected]> wrote in message
news:[email protected]...
Please set the Loggin level to the highest value ie,StdoutSeverityLevel="64".
This will give you detailed information about the individual components
in
the
ear being deployed. The config.xml entries look fine to me.
Are you deploying the applications through the console ? As you arerunning
with the productionMode=enabled, the server would not pick up anythingfrom
the applications dir unless you have deployed it through the console. Doyou
face the same problem when you are running in the dev mode ?
Baiju Gajjar wrote:
I am using Weblogic 6.1, sp1, with Win2k.
I am trying to deploy my application (myapp.ear) which has 3
components,
2 webapp comp and an ejb component.
I have the Myapp.ear file in <weblogic home>/config/baiju/application
directory
and the components are listed in the config.xml file as follows :
<Application Deployed="true" Name="Baiju-WebLogic"
Path=".\config\mydomain\applications\Baiju-WebLogic.ear">
<WebAppComponent Name="Baiju-WebLogic-Backoffice"
Targets="Baiju" URI="Baiju-WebLogic-Backoffice.war"/>
<EJBComponent Name="Baiju-WebLogic-Ejb"
Targets="Baiju" URI="Baiju-WebLogic-Ejb.jar"/>
<WebAppComponent Name="Baiju-WebLogic-Store"
Targets="Baiju" URI="Baiju-WebLogic-Store.war"/>
</Application>
The problem is, when I start the Server it does not deploy theapplication
"Baiju", if I go to admin console
I can see the application as deployed ("its checked") and also its 3
components, but I am not able to access the pages.
Also this problem is not consistent, it sometimes work, with
absolutely
no
change made to anything, I just re-start the server.
I have my server running in Production Mode.
(-Dweblogic.ProductionModeEnabled=true)
Any help is appreciated,
Thanks.
Baiju.

Similar Messages

I tried to download the itunes update and at first it would say i was missing msvcr80.dl so I completely uninstalled itunes and its components, then reinstalled it. Now it says I'm missing"Applle Application Support" How do I fix this?

I tried to download the itunes update and at first it would say i was missing msvcr80.dl so I completely uninstalled itunes and its components, then reinstalled it. Now it says I'm missing"Applle Application Support" How do I fix this?

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Deploying large applications and common used classes

I've got an application containing EntityBeans, statefull/stateless
SessionBeans, and a Webapplication. Every component is packed in a jar File
and all together in an EAR-File as an application.
Those EJBs share some common classes, for example:
EjbA in A.jar and EjbB in B.jar share a Helperclass C.
Where do I put this class C? I try to avoid to put this class C in the
Classpath of the application server. And when I put C in both jar-Files I
got a ClassNotFoundException in one of the EJBs. I'm using WLS 6.0.
Any ideas? Thanx in advance.

FYI, this is fixed in 6.1
Torsten Friebe wrote:
Hi Daniel,
thanks, this article answers my question. But does WLS 6.0 or 6.1 allready
support J2EE Packaging as described in J2EE 1.3 Spec (PFD3) Chapter 8?
Cheers
Torsten
"Daniel Hoppe" <[email protected]> schrieb im Newsbeitrag
news:[email protected]..
Hi Torsten,
there is no really good solution so far. Check out this link, it
elaborates this topic in detail.
http://www.onjava.com/pub/a/onjava/2001/06/26/ejb.html
Cheers,
Daniel
-----Ursprüngliche Nachricht-----
Von: Torsten Friebe [mailto:[email protected]]
Bereitgestellt: Freitag, 29. Juni 2001 11:59
Bereitgestellt in: environment
Unterhaltung: deploying large applications and common used classes
Betreff: deploying large applications and common used classes
I've got an application containing EntityBeans, statefull/stateless
SessionBeans, and a Webapplication. Every component is packed
in a jar File
and all together in an EAR-File as an application.
Those EJBs share some common classes, for example:
EjbA in A.jar and EjbB in B.jar share a Helperclass C.
Where do I put this class C? I try to avoid to put this class C in the
Classpath of the application server. And when I put C in both
jar-Files I
got a ClassNotFoundException in one of the EJBs. I'm using WLS 6.0.
Any ideas? Thanx in advance.

Deploying JEE application and SOA Applications on the same SOA Dom

Are there known issues in deploying SOA Applications and Weblogic/JEE application on the same SOA Domain.
Couple of the issues that I can think of is if that
If SOA Domain is unstable it will also impact JEE applications.
SOA Domain depends on the SOA DB and there is no such db dependency for a weblogic server.
In the past we have been creating seperate domains for Weblogic and Weblogic Integration domains.
Anythoughts ?
Any information on this topic would be greatly appreciated.
Thanks
Pavan

Yes, it is possible to do this using virtual servers.
In your example, you will have two different virtual servers and two http listeners (localhost/8181 and localhost/8282).
When you deploy a war file, you can specify which virtual server to use. (--virtualservers option on asadmin deploy command, admin console has a virtual server text box on deployment screen).
After deployment, the applications will only be available on the http listeners that map to the virtual servers they were deployed to.
Can you also post the problem that you are running into with 8.1 update 2?
Hope this helps,

There is a difference between the document total and its components

Hi!
I have an error message "There is a difference between the document total and its components" when I want to create an InventoryGenEntry
the problem arises from time to time and my customer must do the document two or three times before it is created.
I have seen in this forum and in notes that this is probably being caused by a Rounding.
I am using 2 digits for amounts, 4 digits for prices, 6 digits for rates and 3 digits for quantities.
For information my customer use SAP 2005 and the patch level 46.
This problem happened only in InventoryGenEntry. how can I modifiy parameters to resolve this problem?
thank you for your help.
Best Regards
Séverine

Hi Séverine,
Do you find any additional code added to SBO_SP_Transaction stored procedure. A similar issue with stock transfer fixed in later patch. Please test in latest patch.
Regards,
Vijay kumar
SAP Business One Forums Team

I am trying to purchase some applications and its telling me to contact Itunes support

I am trying to purchase some applications and its telling me to contact Itunes support

OK, then I'd suggest you do what it says and contact iTunes Support (posting here is only contacting your fellow users, in case you thought you'd get to iTunes Support here). Click the Support tab above, then look for the Contact Us section in the middle of the page.
Regards.

HT1923 im trying to unistall itunes and its components and is not letting me/

im trying to unistall itunes and its components and is not letting me?

Do you get error messages when doing the uninstalls? If so, what do they say? (Precise text, please.)

Difference between the document total and its components in inventory transfer

Hi Everyone!
When I make Inventory Transfer, SAP notice error "There is difference between the document total and its components.".Everyone that knows this problem, Pls help to find way to solve it.
Thanks & Best regards
Ngoc Loan

Hi,
Please refer to the thread.
There is a difference between the document total and its components
Hope Helps!
Regards,

Quickest way to clone a JPanel and its components?

Is there a quick method to clone a JPanel and its components?

This has been tried before and not work.
JVM reports errors :
clone() has protected access in java.lang.Object.

Error While deploy VC Application and Par file

Hi Experts,
The deployment of par or VC application worked fine, but last one week i am getting error while deploying par or VC application.
I am getting pop-up window while deploy VC Application. That pop-up window shows Portal Request Failed. (com/sap/netweaver/bc/uwl/UWLException).
I am getting Error like this, Please Check the user ID and password, while deploying par from NWDS.
I have checked my userid and password, it is correct. I checked with admin userid and password, it shows the same error. it is showing same for my team members userid also.
I have checked logs and traces in server, nothing is logging regarding this deployment error.
Where is the problem, please anybody help me. I am using EP7 SP9.
Thanks and Regards,
Chinnadurai R

Hi Detlev,
I checked all the permission in the SECURITY ZONES, all the setting are correct in the portal.
I informed to our BASIS Team, they found that problem is, one process always running in SDM. It didnt let to deploy another PAR file. They cann't able to open the SDM after gave the SDM username and password, its shows "still processing". So, how can we kill the process ? They restarted the SDM and also J2EE Engine, its still processing. After that they restarted the Machine also, still the process going on.
How can we rectify the problem ?..
Thanks & Regards
Chinnadurai R

Enlarge JFrame and its components properties proportionally

Hi,
We have a simple JFrame � Container - uses Flow Layout and has got Buttons, Text Fields� All of them are using Java�s default fonts, sizes..�
And we want to increase or enlarge all of the JFrame and its sub components properties proportionally (especially Font�.) like in for example MS-Word.
In the Ms-Word, there is ZOOM option in the Standard tool bar menu. If you set zoom to 150%, the font is automatically increases. And if you set it to 100% the font sets back to normal. And if the window is not enough to fit, it adds the scroll bars.
For example, if we increase the Labels Font, the height of that component also should increase proportionally. So the Frame also should increase.
How could we achieve this sort of functionality ( i.e. Proportionally increasing the component�s properties ) in Swing?
I believe it is hard to set/adjust the all of the Frame�s components properties (I.e. Height, Font�) proportionally by using the Component listeners.
(Another example, you might have noticed that the Frame�s Font, hight,width �sizes are proportionally bigger in Systems screen�s 800 by 600 pixels mode compare with 1024 by 768 pixels mode. May be this is windows feature. But we are looking at achieving the same sort of feature)
Any help or thoughts would be appreciated.
Thanks in advance.
Vally.

Here is a working sample:
package ui_graphics;
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Dimension;
import java.awt.FlowLayout;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.LayoutManager;
import java.util.Arrays;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JSpinner;
import javax.swing.SpinnerListModel;
import javax.swing.SpinnerModel;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ChangeListener;
public class ZoomableFrameTest {
   private ZoomablePanel zoomPanel;
   private JLabel label;
   public ZoomableFrameTest() {
      label = new JLabel("Essai pour le zoom");
      label.setBounds(0,0,200,16);
      zoomPanel = new ZoomablePanel();
      zoomPanel.add(label);
      JFrame frame= new JFrame("Zoom test");
      frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
      frame.getContentPane().add(getZoomSpinner(), BorderLayout.NORTH);
      frame.getContentPane().add(zoomPanel, BorderLayout.CENTER);
      frame.pack();
      frame.setVisible(true);
   public static void main(String[] args) {
      new ZoomableFrameTest();
   public JSpinner getZoomSpinner() {
      String[] zoomValues = { "50", "100", "150" };
      SpinnerModel model = new SpinnerListModel(Arrays.asList(zoomValues));
      final JSpinner spZoom = new JSpinner(model);
      Dimension dim = new Dimension(60, 22);
      spZoom.setMinimumSize(dim);
      spZoom.setPreferredSize(dim);
      spZoom.setMaximumSize(dim);
      spZoom.setFocusable(false);
      spZoom.addChangeListener(new ChangeListener() {
         public void stateChanged(ChangeEvent e) {
            // R�cup�re le facteur d'�chelle
            int factor = Integer.parseInt((String)spZoom.getValue());
            setScaleFactor(factor);
      spZoom.setValue("100");
      return spZoom;
   private void setScaleFactor(int factor) {
      zoomPanel.setZoomFactor(factor);
class ZoomablePanel extends JPanel {
   private int zoomFactor;
   public ZoomablePanel() {
      super(null);
   public void setZoomFactor(int factor) {
      this.zoomFactor = factor;
      if (this.isShowing()) this.repaint();
   public void paint(Graphics g) {
      super.paintComponent(g);
      double d = zoomFactor / 100d;
      Graphics2D g2 =(Graphics2D)g;
      g2.scale(d, d);
      super.paint(g2);
}

Passing VARs between MXML Application and MXML components!

Hi,
I'm trying to pass a variable between the MXML Application and the MXML Component with ValueObjects.
But when i call the variable on the MXML Component it is null!
ValueObject Class Code:
package valueObjects
 [Bindable]
 public class MyGlobalVars
 public var NomeGaleria: String;
 public function MyGlobalVars()
MXML Application Code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:comp="components.*" layout="vertical" height="100%" width="100%" >
<mx:Script>
 <![CDATA[
 import valueObjects.MyGlobalVars;
 import mx.managers.PopUpManager;
 import mx.core.Container;
 [Bindable]
 public var nomeGaleria:MyGlobalVars;
 private function AbreGaleria():void{
 nomeGaleria=new MyGlobalVars();
 nomeGaleria.NomeGaleria = "Moda";
 PopUpManager.addPopUp(new galeriaImagens(),this,true);
 ]]>
</mx:Script>
<mx:Panel height="673" width="839" verticalAlign="middle" borderStyle="none" layout="absolute">
 <mx:Canvas id="SMGaleria" width="815" height="30" x="2" y="98"">
 <mx:LinkButton x="474" y="5" label="moda" click="AbreGaleria()"/>
 </mx:Canvas>
 <mx:ViewStack id="content" height="440" width="815" borderStyle="none" x="2" y="128">
 <comp:galeriaImagens id="GaleriaImagens" x="0" y="5" strGaleria="{nomeGaleria}"/>
 </mx:ViewStack>
</mx:Panel>
</mx:Application>
MXML Component Code:
<?xml version="1.0" encoding="utf-8"?>
<mx:TitleWindow xmlns:mx="http://www.adobe.com/2006/mxml"
 showCloseButton="true" creationComplete="CenterMe()" backgroundColor="#000000" xmlns:components="components.*" >
<mx:Script>
 <![CDATA[
 import valueObjects.MyGlobalVars;
 import mx.controls.Alert;
 [Bindable]
 public var strGaleria:String;
 private function CenterMe(): void{
 Alert.show(strGaleria);
 ]]>
</mx:Script>
</mx:TitleWindow>
On the MXML component the value of strGaleria is null! It would not have to be: Moda??

You may need to change your code as follows:
<comp:galeriaImagens id="GaleriaImagens" x="0" y="5" strGaleria="{nomeGaleria.NomeGaleria}"/>
Previously you had set strGaleria to the value of the object, not the string within the object.
But I think you will still have a problem because function AbreGaleria will not be called until the user clicks the link button, and only then will NomeGaleria have a value, so I would set a default value as follows, otherwise at app launch it will be null:
public var NomeGaleria: String = "";
or if that does not work
public var NomeGaleria: String = " ";
Another possible problem is that you are calling this code at the component creationComplete, but the LinkButton has not been clicked yet, so the value object string value has not been set, so the alert will not display anything:
private function CenterMe():void{
 Alert.show(strGaleria);
I think you need to reorganize some things here.
If this post answers your question or helps, please mark it as such.

I want the Definitaion fo Class and its Components in ABAP . With Example

Gowri

Classes
Classes are templates for objects. Conversely, you can say that the type of
an object is the same as its class. A class is an abstract description of an object. You could say that it is a set of instructions for building an object. The attributes
of objects are defined by the components of the class, which describe the
state and behavior of objects.

Local and Global Classes
Classes in ABAP Objects can be declared either globally or locally. You define global classes and interfaces in the Class Builder (Transaction SE24) in the
ABAP Workbench. They are stored centrally in class pools in the class library
in the R/3 Repository. All of the ABAP programs in an R/3 System can access the global classes. Local classes are defined within an ABAP program. Local classes and interfaces can only be used in the program in which they are defined. When you use a class in an ABAP program, the system first searches for a local class with the specified name. If it does not find one, it then looks for a global class. Apart from the visibility question, there is no difference between using a global class and using a local class.
There is, however, a significant difference in the way that local and global classes are designed. If you are defining a local class that is only used in a single program, it is usually sufficient to define the outwardly visible components so that it fits into that program. Global classes, on the other hand, must be able to be used anywhere. This means that certain restrictions apply when you define the interface of a global class, since the system must be able to guarantee that any program using an object of a global class can recognize the data type of each interface parameter.
The following sections describe how to define local classes and interfaces in an ABAP program. For information about how to define local classes and interfaces, refer to the Class Builder section of the ABAP Workbench Tools documentation.
Defining Local Classes
Local classes consist of ABAP source code, enclosed in the ABAP statements CLASS ... ENDCLASS. A complete class definition consists of a declaration part and, if required, an implementation part. The declaration part of a class <class> is a statement block:
CLASS <class> DEFINITION.
ENDCLASS.
It contains the declaration for all components (attributes, methods, events) of the class. When you define local classes, the declaration part belongs to the global program data. You should therefore place it at the beginning of the program.
If you declare methods in the declaration part of a class, you must also write an implementation part for it. This consists of a further statement block:
CLASS <class> IMPLEMENTATION.
ENDCLASS.
The implementation part of a class contains the implementation of all methods of the class. The implementation part of a local class is a processing block. Subsequent coding that is not itself part of a processing block is therefore not accessible.
Structure of a Class
The following statements define the structure of a class:
A class contains components
Each component is assigned to a visibility section
Classes implement methods
The following sections describe the structure of classes in more detail.
Class Components
The components of a class make up its contents. All components are declared in the declaration part of the class. The components define the attributes of the objects in a class. When you define the class, each component is assigned to one of the three visibility sections, which define the external interface of the class. All of the components of a class are visible within the class. All components are in the same namespace. This means that all components of the class must have names that are unique within the class.
There are two kinds of components in a class - those that exist separately for each object in the class, and those that exist only once for the whole class, regardless of the number of instances. Instance-specific components are known as instance components. Components that are not instance-specific are called static components.
In ABAP Objects, classes can define the following components. Since all components that you can declare in classes can also be declared in interfaces, the following descriptions apply equally to interfaces.
Attributes
Attributes are internal data fields within a class that can have any ABAP data type. The state of an object is determined by the contents of its attributes. One kind of attribute is the reference variable. Reference variables allow you to create and address objects. Reference variables can be defined in classes, allowing you to access objects from within a class.
Instance Attributes
The contents of instance attributes define the instance-specific state of an object. You declare them using the DATA statement.
Static Attributes
The contents of static attributes define the state of the class that is valid for all instances of the class. Static attributes exist once for each class. You declare them using the CLASS-DATA statement. They are accessible for the entire runtime of the class.
All of the objects in a class can access its static attributes. If you change a static attribute in an object, the change is visible in all other objects in the class.
Methods
Methods are internal procedures in a class that define the behavior of an object. They can access all of the attributes of a class. This allows them to change the data content of an object. They also have a parameter interface, with which users can supply them with values when calling them, and receive values back from them The private attributes of a class can only be changed by methods in the same class.
The definition and parameter interface of a method is similar to that of function modules. You define a method <met> in the definition part of a class and implement it in the implementation part using the following processing block:
METHOD <meth>.
ENDMETHOD.
You can declare local data types and objects in methods in the same way as in other ABAP procedures (subroutines and function modules). You call methods using the CALL METHOD statement.
Instance Methods
You declare instance methods using the METHODS statement. They can access all of the attributes of a class, and can trigger all of the events of the class.
Static Methods
You declare static methods using the CLASS-METHODS statement. They can only access static attributes and trigger static events.
Special Methods
As well as normal methods, which you call using CALL METHOD, there are two special methods called CONSTRUCTOR and CLASS_CONSTRUCTOR, which are automatically called when you create an object (CONSTRUCTOR) or when you first access the components of a class (CLASS_CONSTRUCTOR).
Events
Objects or classes can use events to trigger event handler methods in other objects or classes. In a normal method call, one method can be called by any number of users. When an event is triggered, any number of event handler methods can be called. The link between the trigger and the handler is not established until runtime. In a normal method call, the calling program determines the methods that it wants to call. These methods must exist. With events, the handler determines the events to which it wants to react. There does not have to be a handler method registered for every event.
The events of a class can be triggered in the methods of the same class using the RAISE EVENT statement. You can declare a method of the same or a different class as an event handler method for the event <evt> of class <class> using the addition FOR EVENT <evt> OF <class>.
Events have a similar parameter interface to methods, but only have output parameters. These parameters are passed by the trigger (RAISE EVENT statement) to the event handler method, which receives them as input parameters.
The link between trigger and handler is established dynamically in a program using the SET HANDLER statement. The trigger and handlers can be objects or classes, depending on whether you have instance or static events and event handler methods. When an event is triggered, the corresponding event handler methods are executed in all registered handling classes.
Instance Events
You declare instance events using the EVENTS statement. An instance event can only be triggered in an instance method.
Static Events
You declare static events using the CLASS-EVENTS statement. All methods (instance and static methods) can trigger static events. Static events are the only type of event that can be triggered in a static method.
See also Triggering and Handling Events.
Types
You can define your own ABAP data types within a class using the TYPES statement. Types are not instance-specific, and exist once only for all of the objects in a class.
Constants
Constants are special static attributes. You set their values when you declare them, and they can then no longer be changed. You declare them using the CONSTANTS statement. Constants are not instance-specific, and exist once only for all of the objects in a class.
Visibility Sections
You can divide the declaration part of a class into up to three visibility areas:
CLASS <class> DEFINITION.
PUBLIC SECTION.
PROTECTED SECTION.
PRIVATE SECTION.
ENDCLASS.
These areas define the external visibility of the class components, that is, the interface between the class and its users. Each component of a class must be assigned to one of the visibility sections.
Public Section
All of the components declared in the public section are accessible to all users of the class, and to the methods of the class and any classes that inherit from it. The public components of the class form the interface between the class and its users.

Protected Section
All of the components declared in the protected section are accessible to all methods of the class and of classes that inherit from it. Protected components form a special interface between a class and its subclasses. Since inheritance is not active in Release 4.5B, the protected section currently has the same effect as the private section.
Private Section
Components that you declare in the private section are only visible in the methods of the same class. The private components are not part of the external interface of the class.
Encapsulation
The three visibility areas are the basis for one of the important features of object orientation - encapsulation. When you define a class, you should take great care in designing the public components, and try to declare as few public components as possible. The public components of global classes may not be changed once you have released the class.
For example, public attributes are visible externally, and form a part of the interface between an object and its users. If you want to encapsulate the state of an object fully, you cannot declare any public attributes. As well as defining the visibility of an attribute, you can also protect it from changes using the READ-ONLY addition.
"Example :
CLASS C_COUNTER DEFINITION.
PUBLIC SECTION.
 METHODS: SET_COUNTER IMPORTING VALUE(SET_VALUE) TYPE I,
 INCREMENT_COUNTER,
 GET_COUNTER EXPORTING VALUE(GET_VALUE) TYPE I.
PRIVATE SECTION.
 DATA COUNT TYPE I.
ENDCLASS.
CLASS C_COUNTER IMPLEMENTATION.
METHOD SET_COUNTER.
 COUNT = SET_VALUE.
ENDMETHOD.
METHOD INCREMENT_COUNTER.
 ADD 1 TO COUNT.
ENDMETHOD.
METHOD GET_COUNTER.
 GET_VALUE = COUNT.
ENDMETHOD.
ENDCLASS.
The class C_COUNTER contains three public methods - SET_COUNTER, INCREMENT_COUNTER, and GET_COUNTER. Each of these works with the private integer field COUNT. Two of the methods have input and output parameters. These form the data interface of the class. The field COUNT is not outwardly visible.
Reward points if it is usefull...
Girish

Subsequent configuration to deploy SAPUI5 Application and to activate Gateway service

Hi All,
Subject: I want to know the subsequent configuration in the Gateway system in order to create gateway project in SEGW & register the service to the system alias and deploy SAPUI5 Application in the BSP repository.
I have attached the SAINT Tcode & SICF Tcode details snapshot.
When deploying the eclipse project to the bsp repository, we are getting authorization error. And we dont have authorization for SICF. I found that some ui5 service nodes are inactive, for example ui5_ui5, ui2. Kindly help me at this crucial phase. Your comments are highly appreciated. I want to know the subsequent activities that has to be done in that gateway system.
Thanks in Advance.
S.Vikgnesh

Finally found an answer !
You have to add this to your neo-app.json file : "authenticationMethod": "none"
It's set to saml2 by default.
Here's what my neo-app.json file looks like :
"authenticationMethod": "none",
    "routes": [
            "path": "/onpremisegw",
            "target": {
              "type": "destination",
              "name": "onpremisegw"
            "description": "onpremisegw"
Regards

Is there any way to use RUN button to deploy the application and open IE...

Hi
Thank you for reading my post
i used to use Run button to compile / deploy and run (opening the browser to project context path) .
i want to know is there any way to use RUN button to deploy an application to standalone OC4J and opening browser?
I know that we can define ear or war deployment profiles and use them to deploy the application to stand alone server , but i want a single click solution.
thanks

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Deploy an Application and its components

Similar Messages

Maybe you are looking for