Deploy Color Settings to All Users

I've seen this hinted at elsewhere, but no clear answer.  We want all of our users to utilize North America Prepress 2 color settings.  As is, I have to remember to adjust this setting in Bridge after each user logs into their workstation for the first time.  Is there a file containing this setting that I can copy to all users profiles, or another way to deploy this setting to all users on a workstation?  Ideally, I would ultimately silently deploy this change to all workstations in the domain.  Thanks in advance!

Hi,
Unfortunately, it's impossible for all users.
In Windows 7, you can unlock removable data drives by using a password or a smart card. After you've started encryption, the drive can also be automatically unlocked on a specific computer for a specific user account.
However, the prerequisite is that user must have recovery key.
Karen Hu
TechNet Community Support

Similar Messages

  • How to deploy a file on all users C drive via group policy

    I'm trying to deploy a file on all users C drive via group policy but its not working. logon script is already kept in place but nothing is happening. If I run the same command from my pc it's working fine. Does any one have good script to copy & deploy
    the file. Pls help

    Hi,
    You can use Group Policy Preferences to deploy this and Item-level-Targetting to filter by OUs/groups, wmi filters ,etc.
    Computer Configuration / User Configuration - Preferences - Windows Settings - Files
    More on this here.
    http://technet.microsoft.com/en-us/library/cc772536.aspx
    Hope this helps.
    Regards,
    Calin

  • How to set the same General settings for all users

    Hi Experts,
    How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
    Regards,
    Arti.

    Hi Arti!
    You can default user settings in a PFCG role, in the "personalization" tab.
    If you have a PFCG role that is common to all your users, you can set the default values here.
    However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
    Matthias

  • How to change settings for all users?

    Hi All,
    In cPro we have User Settings button. On clicking that we get a Tabstrip where you will find "User" tab.
    my question is: How can we change the default settings for all users e.g setting the checkbox "Scheduling only manually" to true ?
    Best Regards,
    Arti.

    Hi Arti,
    In cProjects the authorizations can be managed either by authorization profile administration by system administrator for General authorizations or by Project specific authorizations for individual cProjects elements by Project owner.
    Try the first one and I hope you will get the solution.
    Regards,
    Nishit Jani
    Award points only if you find the information useful.

  • How to configure default parental settings for all users (10.7)?

    Hello,
    I've made a silent installation of iTunes using MSI files and it works well.
    I need to enable parental controls and configure it. Users must be preventing of changing these settings.
    At the end of the iTunes installation I automatically created registry keys :
    [HKEY_LOCAL_MACHINE\SOFTWARE\Apple Computer, Inc.\iTunes\Parental Controls]
    "AdminFlags"=dword:001b7ac5
    "AdminMoviesLimit"=dword:000000c8
    "AdminTVShowsLimit"=dword:000001f4
    "AdminRatingSystemID"=dword:0000000b
    "AdminGamesLimit"=dword:0000012c
    According to http://support.apple.com/kb/HT2102 it is the procedure to set default parental settings for all users and to lock these settings.
    When iTunes is first launched, parental settings are not set nor locked.
    I use iTunes 64 bits on Windows 7 64 bits.
    Where is the mistake?
    Thanks in advance.

    You can set up a system cache for sharing jars: See here: http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/enterprise_config.03.06.html

  • Win7 and Reader X - default settings for ALL users/profiles

    I have a custom browser/app that opens PDF's within the app which can sometimes cause issues. I found that if I set Reader X to not open in the browser (Edit>Preferences>Internet - uncheck "Display PDF in Browser") that this does resolve most issues. My problem...when changed this only affects the current user/profile that's logged in. Potentially there can be dozens of users on these laptops. The other setting is when opening a PDF, I get the warning about Protected Mode not being able to be used due to the current configuration. I can select "Always open with Protected Mode disabled" and I no longer get the message; but again, current user/profile only.
    Is there a way to set these settings for ALL users/profiles? Running Win7 (32bit) with Reader X.

    I do not know why you experience this; what exactly happens when a non-admin users attempts to highlight something?
    You are talking about highlighting in the same document?

  • Security settings for all users

    I recently developed a document that requires digital signatures and have been testing it. The only downside is that when a user opens the document, Adobe prompts for the installation of new security settings, and it installs it for that user only. I need to add a registry key to the new security settings, but it is only available to be added to the current user hive. Does anyone know how to install the new settings for all users?
    Here is the registry key I need to add.
    [HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cPubSec]
    "bSelfSignCertGen"=dword:00000000
    Im using Adobe Reader 9.3 and Win XP.
    Any help would be terrific!
    Thanks.

    Hi,
    There are really two separate issues. First, is Adobe pushing updates to the Acrobat Address Book (i.e. adding certificates as trust anchors) and the second issue is how you can push your own update to disable the creation of self-signed digital IDs. Although the two issues share an underlying mechanism, they are separate and you cannot leverage one for the other.
    First issue first. Adobe has entered into partnership with certain Certificate Authorities and has created a mechanism to add their certificates to the Acrobat Address Book (aka Manage Trusted Identities) using http to send a copy of the Security Settings file that contains only digital IDs. There are two ways to trigger the download process. One is to go into the Preferences, select Trust Manager, and click the Update Now button in the Automatic Updates group box. The other method is to load the DigSig plug-in (beginning with Acrobat 9, plug-ins no longer load a launch in order to speed up the launch process). As I'm sure you have deduced, opening a file with a signature field cause the DigSig plug-in to load which in turn triggers the automatic download. The reason we have limited the automatic download to DigSig being loaded is because the vast majority of people viewing PDFs are not using the digital signature functionality (much to my personal chagrin because the more people use digital signatures, the better my job security ) and we didn't want to bother them with an update they would never need. People already complain that there are too many updates, and we are trying to limit the irritability factor. To close the loop on this function, once the download process has been triggered the Acrobat check two more things before it does the update, 1) has it been a month since I checked and, 2) if it has been a month is there a new file to download. This way we are not pestering people with unneeded updates, or if they do need the update, at least not too often. And finally, Address Book management has to be on a per user basis. A certificate that you may elect to trust could be a certificate that the next person want to specifically keep untrusted. The Windows Certificate Store, Mac Keychain and Firefox Certificate Manager all work on a per user basis.
    That brings us to what you would like to do. The good news is you can use the Export Security Settings featrue to create a distributable file that will set the preference. The real question is how will you distribute the file, but before we get to that, here is how to create the file.
    With Acrobat closed, set the registry setting you noted in the message above
    Launch Acrobat
    Select the Advanced > Security > Export Security Settings menu item
    Click the Deselect All button on the Export Security Settings dialog
    Select the Signing Preferences Settings checkbox
    Click the OK button on the Export Security Settings dialog
    Select Signature Creation Settings and note "Allow creation of self-signed Digital IDs" is set to No
    Click the Export button on the toolbar
    Follow the on screen dialogs. You don't have to encrypt the file, but you must sign it with a certifying signature
    At this point you have the file available for distribution. You could e-mail it to your intended recipients with import instructions, or you could post if for download, or you could set the Preference the to automatically push the file from a server. To check this feature out select the Edit > Preferences menu item and then select Security from the Categories list box. You would need to select the Load security settings from a server checkbox and then set up the URL. As an aside, you can also export these settings by selecting the Automatic Update Settings checkbox on the Export Security Settings dialog noted in the bullet points above. You have a chicken and egg problem in that you have to get the users to first manually import the file in order to set up the automatic import. That I can't help you with, you're just going to have to decide what works best for you.
    Good luck,
    Steve

  • Can I share color profiles and distiller settings with all user accounts on my imac?

    Everyone in our studio is on OSX 10.8.3 with adobe cs6 (not creativecliud version).
    I have installed color settings and distiller settings on to the macs under the employees user profile.
    All the machines also have a general user profile which anyone can use (setup mainly for use by freelancers).
    Is there a space on the macs where i can install the color profiles and distiller settings so that all user accounts have them set up?
    At the moment i am having to go into each user account on each machine and do it manually.
    Also once i have installed distiller settings in one user account I can't install them on subsequent users.
    I have tried placing the files in the
    library/applicationsupport/adobe/color/
    library/applicationsupport/adobe/adobepdf/settings
    and
    user/library/applicationsupport/adobe/color/
    user/library/applicationsupport/adobe/adobepdf/settings
    any help would be much appreciated.
    Thanks,Russell

    In that case, assuming your wife's XP User Account can access the D: drive as well, you don't have to bother with the To share your music with other accounts on the computer section of that article. That's already taken care of.
    Just log into her account and head directly to the To listen to another account's music files section and follow those instructions.
    If I had to emphasize one step to keep from stuffing it up, it would be:
    4. Deselect the "Copy files to iTunes Music folder when adding to library file" option.
    ("Deselect" being a fancy way of saying "uncheck")

  • Update hosts file and Change proxy settings for all users on Mac

    I am in a large environment with many Mac users. We have a Windows based proxy server that we are switching over within a few weeks. So far we are manually having to go to each Mac and change the proxy settings under the users account. This is a very long and painstaking process as users are on vacation etc. and our cutoff date is fast approaching for the old proxy.
    we also are having to log into each workstation as administrator go into the terminal and so sudo passwd root then change the password then do sudo vi /etc/hosts to edit the hosts file.
    Is there a way to change the proxy server setting for safari and firefox globally without having to log in as each user on the Mac ?
    Or is there an automated way through a script that the users can run ?
    These macs authenticate to active directory. They do not have a mac server but I was told to post this question here versus the desktop area.

    Most browsers include an [automatic proxy configuration (PAC) mechanism|http://en.wikipedia.org/wiki/Proxy_auto-config] and the transparent configuration of proxies, and Safari and Firefox are no different here.
    The usual approach here is to have folks visit a site and select the PAC file, or to push the file out. Here is a comfiguration example from [UConn|http://helpdesk.uconn.edu/trouble/proxy/autoprox.html], and another from [Rice|http://proxy.rice.edu/setup.php], and there are others around and visible via Google.
    The [pactester|http://code.google.com/p/pactester> tool might be useful, too.
    If y'all get some DNS entries set up (various web browsers have [Web Proxy Auto Discovery (WPAD)|http://en.wikipedia.org/wiki/WebProxy_AutodiscoveryProtocol], when last I checked [Safari needed a little help|http://www.macosxhints.com/article.php?story=20090711031033128]) and have your firewall raise an appropriate diagnostic page, you won't have to go through this again, either.
    None of this stuff is particularly specific to Mac OS X or to Safari; the PAC stuff is fairly generic, and WPAD is used with various boxes. (Try Safari with WPAD, but you might still need to reference that PAC file. And if you do, using WPAD-compliant naming would probably be a reasonable approach.)
    The hosts files? You're really still using those? Any chance you can get real DNS working? That's a whole lot less work, and now is the time to deploy that; if you're going to mess with everything, then you can use that effort and that requirement to (also) move forward in your networking capabilities.

  • How to copy default settings to all user ?

    Dear Expert
    I want to set for all users have same default settings (default form layout)
    is there any way to copy default settings from 1 user to another users ?
    really appreciate your help
    thank you
    Best Regards
    JeiMing

    Hi,
    If am understood, I hope you are expect the authorization copy.
    Procedure
           1.      In the Administration  --> System Initialization  --> Authorizations window, choose the name of the user whose authorizations are to be copied. Hold the mouse button until a rectangle appears around the user name.
           2.      Drag the rectangle to the name of the user to whom to grant the authorizations.
           3.      Release the mouse button.
           4.      A system message prompts for confirmation of the copy operation.
           5.      Choose OK to confirm the operation. The authorizations are copied completely to the second user.
    Thanks & Regards,
    Venkatesan G.

  • Saving Settings for all Users

    Hi,
    I am searching for a Solution, how to save WD ALV View using Settings globally, which means, that
    this Setting is valid for all Users and not User dependent.
    In GUI ALV we set it as Example /TEST and after Saving it, it will be valid for all Users.
    How to Code it? Please give Example. Thanks!
    Best regards
    Beserithan Malabakan

    Hello,
    Do the following:
    In the se80 choose you web dynpro application and the go to the menu Web Dynpro Application->Test->Execute in Administration Mode, now all changes that you do in the configuration will be saved for all users (if when saving you select the Assignment = All ).
    Regards.

  • Adobe Captivate 7 - distributing settings to all users on the same computer?

    Is there a way to share preference to all users on the same computer?
    Perference->General settings:
    [ ] show welcome screen
    Publish at: c:\newpublishdir\
    Project cache: c:\projectcachedir\
    Perference-> Recording->video demo:
    Working folder: c:\testdir\
    The dirs I listed is just for example

    Hi there
    If what you are asking is if there is a way to configure all users so they have identical preferences, you might try this:
    From any account on the computer, open Captivate. Click Edit > Preferences and ensure the settings are pointing to a common location shared by all accounts on the computer. Dismiss preferences.
    Now click File > Export > Preferences... and save them to a file in a known location that is also shared by all accounts.
    Now open each of the other accounts on the computer, start Captivate and click File > Import > Preferences... and see if things are configured accordingly. If so, repeat the process for all accounts on the computer.
    Cheers... Rick

  • Moving Workspace settings for all users

    Hi
    I wanna move all workspace settings(like default startup options,preview modes, different type of separators etc ) for all users from test to dev enviroment.
    Does anybady know how to do it?
    regards
    sasha

    Hi Rooa,
              All Users Portal Favourites are stored under Content Administration -> KM Content -> Root -> Userhome.
    This folder has all the data related / specific to a user. You can trasport this through to ICE to your other environment (QA or prod).
    Check if this helps.

  • Setting automatic update settings for all users

    Hello all,
    I'm trying to roll out Quicktime 7.6 to our corporate desktops with the automatic update feature within Quicktime disabled. In past installs we were able to make the setting change and then copy the quicktime.qtp file to the "C:\Documents and Settings\All Users\Application Data\Apple Computer\quicktime" directory on all the computers and all would be good. However with 7.6 is appears this file is now housed under the individual user's profile. Is there a way to make this a global setting for all users logging in to a pc?
    Thanks in advance!
    KC

    We have a similar problem in a High School, using Windows XP Pro, QT 7.x and Active Directory. While going to a Spanish Exam web page that uses QT, the students get locked into an auto update process. As restricted users, they can neither abort or accept the update, and are unable to complete the exam. We have found that unchecking the preference for auto update as an admin user does not uncheck it for anyone else. Under C:\Documents and Settings, there is no folder for Apple Software except for myself, once I have opened the QT preferences. I assume that Apple has hidden the location of the default preference to force updating, without regard to how that would work in a locked-down environment. It sure creates havoc when 30 students sit down for a timed and graded online exam!! Any answers out there?

  • Saving AVL view settings for all users

    Hi,
    I am working on web dynpro abap application which shows alv results of more reports (you will select report and it will show the alv table result).
    I have to use some standard reports for this, so I copied it to Z report and modify it so this is possible. Problem I have is that is standard report the output have maybe 10 columns, but the table I got from the report has maybe 26. I want to limit shown columns on the ALV with settings of view for alv, but the assignment is only possible for the user.
    Is there any way how to create one view settings and make it initial for all users?
    I know there is a way of modifying the standard view via abap code, but I want to keep the possibility to show all fields if required.
    Thanks for your help very much.
    Martin

    Hi,
    another problem, I was expecting the newly created variant / layout / settings for view  would be tied to the displayed table (which sounds kind of wired as I wrote it down). 
    But since I am displaying different tables in the same UI element and binding the tables and their structures dynamically the created variant applies to all of the tables (or thats how it seems) so the table which have all fields different then the layout shows nothing.
    Do you have any ideas how to get around it?
    My idea would be to store the layout (but i have no idea how it looks at db level) and identification of the report to some customer table and fill attribute of alv table dynamically according to used report. But thats just my idea, I have no idea if it si possible to do it like this.
    Is there some other way how to accomplish this functionality?
    I have also tried to do it on fieldcatalog level of the alv table, but it seems to show first, let's say, 8 fields if there is 8 fields in the fieldcatalog.
    Any help or ideas please??
    Thanks
    Martin
    Edited by: Martin Gabris on May 6, 2011 4:11 PM

Maybe you are looking for