Deploy customize workflow takes a long time to show up in application

Hi,
This is the first time (newbie) i am customizing and deploying work flow in ebiz(R12), the problem that I am facing is that after I deploy the customize workflow it takes a long for the ebiz to pickup/show the changes.
What I did was to customize a standard workflow and save it back to database. I have tried retrieving the customize workflow to make sure that the workflow was save into database (not a access problem). After about a day then the customize workflow shows up (I used the 'status diagram' to see the workflow progress). Have already tried restarting the server, clearing out the cache but the customization still does not take effect (will only take effect the next day) . Am i missing a step ?

Hi,
Unless you are specifying an effective date in the future when you deploy the definition, the new version should become available immediately. Any existing workflow processes will continue to run using the definition that was valid when the process started, but any new processes will use the new definition.
If this is not happening, then I would urgently raise a service request with Oracle support, as you are experiencing something very different from the expected functionality.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Similar Messages

F4 Process takes a long time to show the values

Hi gurus,
We are facing an issue with the InfoObject Sup. Company Code 0COMP_CODE, this characteristic has 200 enties in the Master Data, and 10000 values in the SID table.
This infoObject is being used in a Query (3.X version) and when we press the F4 to obtain the values, it takes a long time to show them.
The query takes data from a Multiprovider, and the multiprovider only has one Cube.
The issue is happening with a lot of query (obviosly, with the same object), and there is no reason to do it I think, because the amount of records is not too much (10 K rec).
So, what do you think is happening? all your help will be helpfull.
Regards, Federico

Frederico / Rob,
setting the InfoObject property of 'Query execution filter value selection' to 'values in master data table' has the consequence that it is indeed faster on the query selection screen, but then when selecting filter values after the report has been displayed is not restricted to the values in the report results - again all master data values are shown for selection. This is not acceptable to our users.
Ideally, I would like to see two settings for query execution - master data for the initial selection screen, only posted values for navigation after the query has been executed. But I doubt that's going to happen.
In BW3.5 I seem to remember that you can set the choice of F4 display within the web template (can't in BI7).
NB for BI7 Java execution, examine the 'order for F4 help' on the InfoObject attributes and remove most of SAP's default settings. This will speed things up a little.
David

Deploying application takes a long time

Deploying en exploded EAR takes unually long time and thread
dumps and directory listings show that WebLogic
1. jars whole app in it's internal folder
2. unjars ear it just created back to the exploded form
Dimitri

Hi James,
Thank You for your suggestion. I have some doubts.
1) You suggested to revert back to old parameter and restart jDEV. What is the parameter i need to revert? I have only changed the max,min and perm size in opmn.xml because I keep getting perm gen error quite often. Did you mean those parameters ?
2)Restarting jDev will solve the issue of longer deployment time for applications. But when I restart the SOA itself, it fails to start.I get the Time out error. On removing the application which took longer time to deploy from server.xml, SOA starts without error. No other changes have been made. So the question is why is the application which is successfully deployed from jdeveloper like many other applications stopping the SOA to start.?
3)Or is the load during SOA startup is high, which results in it failing to start? If so how can I overcome this issue.
Thanks,
Ananth
Edited by: user8655700 on Sep 14, 2009 10:25 PM

Retrieving free/busy information from the server takes very long time

Hello, we are running Outlook 2010 32-bit in Windows 7 64.bit, and have encountered a strange problem, whenever we want to book
a resource (i.e. conference room) from Scheduling assistant, it takes very long time, sometimes even more than a minute to see the utilization of the room, it being stuck at "Updating schedule information. Retrieving free/busy information from the server"
The interesting thing is that most newly deployed PCs exhibits this same behavior, while older machines with basically the same setup gets the availability information almost immediately.
It is unclear whether this is a server setting or desktop issue, as all new Windows 7/Outlook machines that are deployed from the WDS-server exhibits the same slow behavior.
Please advise any troubleshooting steps to investigate the very slow retrieval lookup of free/busy information from the Exchange server.

Hi,
Does this issue occur on OWA?
If no, it means the issue is mainly related to the Outlook client.
Regards,
Simon Wu
TechNet Community Support

Exchange 2013 mailbox takes a long time to connect with Outlook 2010

We just installed a 2013 CAS/Mailbox server in our Exchange 2007 environment and are running in coexistence while we migrate users over. So far I have only moved one 2007 mailbox over, a new account used for testing. Everything is working fine, OWA,
ECP, ActiveSync, etc... When connecting Outlook to a 2007 mailbox autodiscover takes a couple seconds and Outlook opens fine. The problem is when connecting Outlook to a mailbox on the 2013 server. Autodiscover takes about a minute before it finally finds
the settings and the mailbox takes about 30 seconds to open everytime. It generally times out, I click retry and the mailbox opens. Once in everything is good but the initial loading always takes a long time, double the time when opening Outlook with a shared
mailbox attached. All autodiscover is autodiscover.domain.com, Exchange 2007 is all legacymail.domain.com aside from the components that need to point to 2013. We do not have any certificate issues, well that's not true, at some time in the last couple years
someone applied a 3rd party cert to our domain.com root but not sure if that would cause this issue. Also, these are internal clients we are trying to get going with the 2013 mailbox, not external. I just applied a registry change that helped someone else
out there by disabling IPv6 for all components but that did not work for us MS KB929852. Any suggestions? Right now I am thinking of changing the internalURI for autodiscover to the FQDN of the server but wanted to see if anyone had any ideas.
Jeremy

Hi Angela, thanks for the response. I cannot post links or pictures as my account has not been verified?
The autoconfiguration tests passed, I will paste the xml below. Ping times were all under 1ms. When I entered the IP for the 2013 serve I received errors that the connection to Exchange is unavailable followed by another one that the name cannot be resolved.
I did this test by removing the Outlook profile and creating one manually without Autodiscover. I am able to ping the server by all names from the command prompt.
Our autodiscover.domain.com points to our 2013 server and the name is resolvable both internally and externally. Our certificates cover the internal server name fqdn as well as external names. I am doing all testing in the internal network.
Pinging 2013server.fqdn.com [172.16.xx.xx] with 32 bytes of data:
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Ping statistics for 172.16.xx.xx:
    Packets: Sent = 13, Received = 13, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns= removing link for post, points to the schema . microsoft . com ... 2006
<Response xmlns= removing link for post, points to the schema . microsoft . com ... 2006a
    <User>
      <DisplayName>2013user</DisplayName>
      <LegacyDN>/o=domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=91d6299a8d1440e6b80fcc854dc3f860-2013user</LegacyDN>
      <AutoDiscoverSMTPAddress>[email protected]</AutoDiscoverSMTPAddress>
      <DeploymentId>565c12be-83dc-44c7-a843-37b9bf26b9db</DeploymentId>
    </User>
    <Account>
      <AccountType>email</AccountType>
      <Action>settings</Action>
      <MicrosoftOnline>False</MicrosoftOnline>
      <Protocol>
        <Type>EXCH</Type>
        <Server>[email protected]</Server>
        <ServerDN>/o=domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]</ServerDN>
        <ServerVersion>73C082C8</ServerVersion>
        <MdbDN>/o=domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]/cn=Microsoft Private MDB</MdbDN>
        <PublicFolderServer>webmail.company.com</PublicFolderServer>
        <AD>SMS-AD1-SRV11.domain.ca</AD>
        <ASUrl>https://webmail.company.com/ews/exchange.asmx</ASUrl>
        <EwsUrl>https://webmail.company.com/ews/exchange.asmx</EwsUrl>
        <EmwsUrl>https://webmail.company.com/ews/exchange.asmx</EmwsUrl>
        <EcpUrl>https://webmail.company.com/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.ca</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.ca</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.ca</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.ca</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.ca</EcpUrl-sms>
        <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=domain.ca</EcpUrl-publish>
        <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.ca</EcpUrl-photo>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.ca</EcpUrl-extinstall>
        <OOFUrl>https://webmail.company.com/ews/exchange.asmx</OOFUrl>
        <UMUrl>https://webmail.company.com/ews/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://webmail.company.com/oab/8a3774fa-6f23-40c7-8106-707cc5b7b1b6/</OABUrl>
        <ServerExclusiveConnect>off</ServerExclusiveConnect>
      </Protocol>
      <Protocol>
        <Type>EXPR</Type>
        <Server>webmail.company.com</Server>
        <SSL>On</SSL>
        <AuthPackage>Basic</AuthPackage>
        <ASUrl>https://webmail.company.com/EWS/Exchange.asmx</ASUrl>
        <EwsUrl>https://webmail.company.com/EWS/Exchange.asmx</EwsUrl>
        <EmwsUrl>https://webmail.company.com/EWS/Exchange.asmx</EmwsUrl>
        <EcpUrl>https://webmail.company.com/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.ca</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.ca</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.ca</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.ca</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.ca</EcpUrl-sms>
        <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=domain.ca</EcpUrl-publish>
        <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.ca</EcpUrl-photo>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.ca</EcpUrl-extinstall>
        <OOFUrl>https://webmail.company.com/EWS/Exchange.asmx</OOFUrl>
        <UMUrl>https://webmail.company.com/EWS/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://webmail.company.com/oab/8a3774fa-6f23-40c7-8106-707cc5b7b1b6/</OABUrl>
        <ServerExclusiveConnect>on</ServerExclusiveConnect>
        <EwsPartnerUrl>https://webmail.company.com/EWS/Exchange.asmx</EwsPartnerUrl>
        <GroupingInformation>Acheson</GroupingInformation>
      </Protocol>
      <Protocol>
        <Type>WEB</Type>
        <Internal>
          <OWAUrl AuthenticationMethod="Basic, Fba">https://2013server.domain.ca/owa/</OWAUrl>
          <Protocol>
            <Type>EXCH</Type>
            <ASUrl>https://webmail.company.com/ews/exchange.asmx</ASUrl>
          </Protocol>
        </Internal>
        <External>
          <OWAUrl AuthenticationMethod="Fba">https://webmail.company.com/owa/</OWAUrl>
          <Protocol>
            <Type>EXPR</Type>
            <ASUrl>https://webmail.company.com/EWS/Exchange.asmx</ASUrl>
          </Protocol>
        </External>
      </Protocol>
      <Protocol>
        <Type>EXHTTP</Type>
        <Server>webmail.company.com</Server>
        <SSL>On</SSL>
        <AuthPackage>Ntlm</AuthPackage>
        <ASUrl>https://webmail.company.com/ews/exchange.asmx</ASUrl>
        <EwsUrl>https://webmail.company.com/ews/exchange.asmx</EwsUrl>
        <EmwsUrl>https://webmail.company.com/ews/exchange.asmx</EmwsUrl>
        <EcpUrl>https://webmail.company.com/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.ca</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.ca</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.ca</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.ca</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.ca</EcpUrl-sms>
        <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=domain.ca</EcpUrl-publish>
        <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.ca</EcpUrl-photo>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.ca</EcpUrl-extinstall>
        <OOFUrl>https://webmail.company.com/ews/exchange.asmx</OOFUrl>
        <UMUrl>https://webmail.company.com/ews/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://webmail.company.com/oab/8a3774fa-6f23-40c7-8106-707cc5b7b1b6/</OABUrl>
        <ServerExclusiveConnect>On</ServerExclusiveConnect>
      </Protocol>
      <Protocol>
        <Type>EXHTTP</Type>
        <Server>webmail.company.com</Server>
        <SSL>On</SSL>
        <AuthPackage>Basic</AuthPackage>
        <ASUrl>https://webmail.company.com/EWS/Exchange.asmx</ASUrl>
        <EwsUrl>https://webmail.company.com/EWS/Exchange.asmx</EwsUrl>
        <EmwsUrl>https://webmail.company.com/EWS/Exchange.asmx</EmwsUrl>
        <EcpUrl>https://webmail.company.com/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.ca</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.ca</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.ca</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.ca</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.ca</EcpUrl-sms>
        <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=domain.ca</EcpUrl-publish>
        <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.ca</EcpUrl-photo>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.ca</EcpUrl-extinstall>
        <OOFUrl>https://webmail.company.com/EWS/Exchange.asmx</OOFUrl>
        <UMUrl>https://webmail.company.com/EWS/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://webmail.company.com/oab/8a3774fa-6f23-40c7-8106-707cc5b7b1b6/</OABUrl>
        <ServerExclusiveConnect>On</ServerExclusiveConnect>
      </Protocol>
    </Account>
</Response>
</Autodiscover>
Thanks,
Jeremy

Problem description: My macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click- EtreCheck

My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 250
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320,07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Stickies    Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    npsf_cef: Version: sf 3.3.1.1 [Click for support]
    Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
    DivX HiQ
    DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
    Destinations:
        Time Machine Backups [Local]
        Total size: 999.86 GB
        Total number of backups: 60
        Oldest backup: 2012-07-15 01:16:54 +0000
        Last backup: 2015-03-29 19:28:06 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
        97%    rapportd
         3%    WindowServer
         1%    mds
         0%    fseventsd
         0%    distnoted
Top Processes by Memory: ℹ️
    155 MB    Safari
    120 MB    Finder
    86 MB    rapportd
    86 MB    WindowServer
    69 MB    mds_stores
Virtual Memory Information: ℹ️
    12.56 GB    Free RAM
    2.53 GB    Active RAM
    428 MB    Inactive RAM
    1.66 GB    Wired RAM
    1.04 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 31, 2015, 06:00:15 PM    Self test - passed
    Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
    Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
    Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
    Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
    Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
    Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
    Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
    Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

It takes a long time to open an app and sometimes it will just crash, any idea how to fix it?

My four year old Macbook Pro couldn't start yesterday and after going through solutions and all, it worked. But now it's freaking laggy and whenever I want to open an app, it takes a long time or the app will just crash. Any idea how to fix it? I really need the speed and everything back.

noeleeeen,
so you have an external hard disk, onto which you deleted/moved files from your internal hard disk, so that you now have 143 GB or so free on your internal hard disk — is that correct? Is the external disk purely for backups (e.g. a Time Machine destination), or does it function as a supplement to your internal disk?
Was it entirely your personal data files (documents, photos, movies, music, &c.) which you’d deleted or moved to the external disk, or did you also delete/move apps, libraries, &c. over there?
I’m not familiar with Echofon Lite, so I can’t comment on it, but an Apple-supplied app like the App Store shouldn’t crash.
Have you tried running Disk Utility yet, to see if its verification process gives your disks its seal of approval?

Firefox takes a long time to close since a recent update and hogs memory.

Since one of the recent updates that started using plugin containers, Firefox takes a long time to close. If I try to go back it, it tells me it is still running. I liik in Task Manager and about seven plug-in container. exe's are running and I have turned off or disabled mostplugins and addons, even Quicktime. Firefox uses an obscene amount of RAM on my XP machine and has made it sluggish. I use XP SP3. This started after you added the plugin containers in one of the recent updates earlier in the year. For the features it offers me or doesn't offer me, rather, it uses way too much RAM and is too sluggish. And takes a very long time to close out when I close the browser. It uses about twice as much RAM as it used to.

Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/Troubleshooting+plugins

Macbook takes a long time to recognize power soure

Hello,
I have a MacBook running 10.6.8 that is exhibiting some strange behavior in regards to the power source. When I plug the power cord in it takes a while, sometimes as long as 3 minutes to recognize that it the computer is no longer running on battery anymore. Similarly it takes a long time to realize it's no longer running via a power cord when I remove the power cord from the machine. In all cases it eventually catches up and makes the proper switch, but I'm a bit concerned as this behavior is relatively new. I've tried swapping out power cords and it doesn't make any difference. I only have one user on the machine but could create a test account and try to see if this behavior is account specific if someone things that is worthwhile. Another thing to note, I believe the battery level indicator is correct, because often when it catches up after I've inserted the power cord the percent full jumps a couple of digits, as if it'd been charging for a while. Does anyone have any thoughts or ideas that I could try to remedy this? So far, I've really only tried repairing disk permissions as I've never seen an issue like this before. Thanks.
-NifflerX

How long is "forever"?
Create a new user account. Log out of the original and into the new one, then put the machine to sleep. Any changes?
~Lyssa

Firefox takes a long time to load, even with add-ons and auto-update disabled

When opening firefox it takes a long time (1 minute +) to load. The computer does not display any indication that firefox is loading (often leading to 2, 3 or 4 instances of Firefox trying to start due to my impatience).
My OS is Windows Vista 32 bit
Firefox is v4.0.1

Can you check your Windows Firewall settings? It's possible that it's routing Firefox requests differently. At least one other Firefox user has reported that his Windows Firewall was set to block Firefox 3.6.

Import of Apex Application to another instance takes a long time

Hi,
I have developed an apex application which is of size -24 MB .While importing the appl to another instance it takes a long time (few hours). The imported appl is working fine so far.
What should be the ideal time for the import of this size appl ?
Is it the usual due to the size of the app or some thing is wrong with the app ?
Any one can please throw some light on this, as I am unable to figure out if it the appl issue or the DB issue.
Thanks in advance!

The application is getting imported and running, so you do not really have a problem in hand.
24M is big, but not all that big to run for hours.
The time taken depends on the resources available on the server where you are trying to import. If the load on that server is high then the resources will be shared between all the processes run on it, and the import process will run longer.
Monitor disk and CPU usage, it will provide you some clues. Try importing at offpeak time and it should run faster if there is a server resource issue.
Regards,

My iPad air 2 takes a LONG time time to charge

So I recently got a IPad Air 2 and I have used the 10w charger which it came with but it takes a LONG time to charge. In around 1 hour is only goes up around 10% and the charger gets quite hot. Also sometimes it displayed the message,"Not charging," up in the corner where the battery symbol is. Now I got the 12w wall plug charger and it's abit faster and the charger gets hot but not as hot as the other one just warm. I haven't had the message,"Not charging," yet.
Has anyone had the same issue or can help because I don't think It is a battery issue as the iPad air 2 is brand new and I only got it 2 days ago.

Mine is a new IPAD Air and I have about 50 apps - the device has been trying to download/sync my apps overnight and it is nowhere near done......I have been trying to do it through Itunes leaving it with the IMAC (syncing computer) overnight but it is nowhere near done......
The IMAC uses a wireless connection for Itunes, etc.....
As of now the IPAD Air is showing that it is downloading but I wonde whether I should shut it down and restart?
The downloads have been going on for about 12 hours.....

Why it takes a long time for my MacBook Air to turn on?

I brought my MacBook Air at a Power Mac Center to fix vertical lines on the screen. The vertical lines were removed. But since then, when I turn on my laptop, it takes a long time before it actually turns on. Sometimes, after pressing the power button, something seems to run at the upper left corner of the keyboard (near the power adapter) but it takes me practically hours before it actually turns on.
And when it is turned on already, I observed some unusual behaviors happening:
- Sometimes, while it is turned on, the battery status in the menu bar looks operating normally, but after a while, the trackpad will no longer work until the battery status says, "No Battery Available" and "Power source: Power Adapter".
- Sometimes, several horizontal lines appear on the screen then after a while the laptop will hang up.
- Sometimes, the sound sounds abnormal then after a while the sound no longer operates, and when I check the Sound at the System Preferences, it says, "No input devices found"
- Several applications do not work anymore, like Calendar, TextEdit, Reminder, Facetime, Preview and others.
Please help me figure out the problem. I cannot use my laptop as regular as before. I can no longer catch up with paper work deadlines because of these problems.

Please, help me. I need an immediate response so I could try to fix the problem because I need to use my laptop right away. Pls help.

My mac takes a long time to log on, running slow

my imac is running slow & takes a long time logging on, anyone knows why this happens?

If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
Launch the Console application in the same way as above, and select “kernel.log” from the file list. Post the dozen or so most recent messages in the log — the text, please, not a screenshot.
If there are runs of repeated messages, post only one example of each. Do not post many repetitions of the same message.

When i turn it on it takes a long time to start up and it freezes in some of the apps so I had to turn it off

Recently when I turn on my mac it takes a long time to start up and at first and in the beginning it appears with a grey screen and at the end it turns blue.
Also it freezes in some of the Apps, so it make me to turn of.
Please be kind enough to guide me to solve these problems.
I thank you in advance for your cooperation and quick response.
Best Regards
Ahmad Emami

What SP are you on? We had a similar issue w/SP6 but it was resoloved with SP7.
Michael

Deploy customize workflow takes a long time to show up in application

Similar Messages

Maybe you are looking for