Deploy Ic Web Client in the Solution Manager 4.0 SR2

Hi,
We have been using solution manager 4.0 service desk, and would like to deploy the IC Web Client. request if some can help with the ear/sda/sca file needed to depoly the same andso that i can start working on the same.
awaiting your response on the same. Thanks a lot in advance.
Best Regards
Mahendra K

Hi,
IC Webclient is a BSP based Application.
Activate the Correspondending Nodes in TA SCIF and you can use the IC WebClient. See also SPRO SolMan -> Config -> scenario specific -> Service Desk -> ICWebClient.
BR
Volker

Similar Messages

Deployment of Web Application when the managed Server is down .....

Part of our installation, we want to deploy our web application on to a managed server.
So, we use the JMX API calls to deploy the web application. But, at the time of this deployment the managed server is not brought up. So, our expectation was that when the managed server is brought up later, it will automatically STAGE the web application from Admin Server and then, deploy it in the managed server.
But, what is happending is that the web application is not being deployed to the managed server (even though the web application is configured to be deployed in the specified managed server in the config.xml and it is set as the default application of the managed server application).
We are using WebLogic 7.0 SP2 on RedHat Linux 7.2.
Can anyone help to deploy web application on to a managed server when the managed server is down ?
Thanks,
Selva-
[att1.html]

This is currently being fixed in 7.0 line, contact [email protected] and reference
CR110687
Cheers
mbg
"Selvamohan Neethiraj" <[email protected]> wrote in message news:[email protected]..
Part of our installation, we want to deploy our web application on to a managed server.
So, we use the JMX API calls to deploy the web application. But, at the time of this deployment the managed server is not brought up. So, our expectation was that when the managed server is brought up later, it will automatically STAGE the web application from Admin Server and then, deploy it in the managed server.
But, what is happending is that the web application is not being deployed to the managed server (even though the web application is configured to be deployed in the specified managed server in the config.xml and it is set as the default application of the managed server application).
We are using WebLogic 7.0 SP2 on RedHat Linux 7.2.
Can anyone help to deploy web application on to a managed server when the managed server is down ?
Thanks,
Selva-
[att1.html]

VC deployed on the Solution Manager 4.0 J2EE

Dear All,
I have just deployed the Visual Composer on the Solution Manager 4.0 J2EE, this version is based on a 7.0 basis.
Have you ever done something like this? maybe on any other SAP Netweaver 2004s solution.
Does it works properly ?
Regards,
Giampaolo

Giampaolo,
Yes, I've installed the VC. However, when I ran the installation, I needed to install the VC onto a portal, and a portal specifically. The VC is additional functionality, yes, but apparently needs the components provided by a portal installation to work correctly.
Do you have a portal available? If the J2EE stack attached to the SOLMAN is only a base J2EE stack, this may not work correctly.
Cheers,
Tim

Confiuration of ides system in to the solution manager

Hi .
   We now installed new R/3 IDES server . Now we want to configure this new server into the solution manager maintenance optimizer . Kindly give me the steps for this configuration ..
Regerds
Selvan

Hi Ragu
         We already installed the new solution manager 4.0 server and IDES . Now we want to enable maintenance optimizer in our solution manager . As per one note i have to create one request as give n below .
     Create a new transport request (transaction SE09) in the source client of your Solution Manager system. Unpack the SOLMAN40_MOPZ_TTYP_SLMO_000.zip file from the attachment to this note. Copy the contents of the SOLMAN40_MOPZ_TTYP_SLMO_000.txt file into the transport request. Use transaction SCC1 to import the transport request into your Solution Manager client.
As per the above mentioned note , iam not able to attach the SOLMAN40_MOPZ_TTYP_SLMO_000.txt file in the tcode SE09 .
KIndly give the note for do this ,
selvan

Define Service Desk Destination in the Solution Manager System (Dump creen)

hi,
in SPRO when i click on Define Service Desk Destination in the Solution Manager System
i got dump screen with the error below
any help?
Runtime Errors         SAPSQL_EMPTY_TABNAME
Except.                CX_SY_DYNAMIC_OSQL_SYNTAX
Date and Time          13.07.2008 14:05:57
Short text
    A dynamically specified FROM clause has an unexpected format.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSHI2" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not
     caught in
    procedure "STREE_READ_NODE_GENER" "(FUNCTION)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The running ABAP program attempted to execute an Open SQL statement in
    which a FROM clause was specified dynamically in the field "TABLE_NAME". In
     this
    FROM clause, either a table name after a join operator is missing, or an
     alias name after the key name "AS". The field "TABLE_NAME" could be empty as
    well.
regards

Hi,
I am facing the same problem. What is SP15 ?
Is there any SAP Note that can be applied to correct this ?
Thanks.

The detection of short dump in the Solution Manager

Hi,
In my project, Batch are processing every night In the CRM system.
IF any error was occurred, alert email will be sent by the system, however,
when the "short dump" was occurred unexpectedly,the system can't detect it and email was not able to be sent.
Therefore I want to detect the "short dump" in the "Solution Manager".
Who can tell me that Is there any standard service/function which can handle this in the "Solution Manager" ?
regards
Takahiro

Hi,
Please check below URL and notes, hope it helps.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/content.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/05c80724d63836e10000000a42189b/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e3eeb4a8-0b01-0010-bd99-f4a700a49d32?quicklink=index&overridelayout=true
note 553953
note 784752
Regards,
Deepanshu

How to install the Solution Manager

Hi Gurus,
any one can help me out i want to install the Solution Manager 4 any one can help me out like what is the minimum HDD & RAM is required, and how many exports wil required this Solman. Can i download from Market place please gurus help me out.
Cheers

Download Solution Manager from
http://service.sap.com/instguides
--> Technology Components
Find the installation guide at
http://service.sap.com/instguides
--> SAP Components
--> Solution Manager
For sizing and other questions see note
1088980 - Documentation: SAP Solution Manager 4.0
Markus

How to get the Version of the Solution Manager

Hi Experts,
The Solution Manager is Already Insatlled on our Machine.
How to Find out the Version of the Solution Manager???
How to Disply the Solution Manager Key????
Please give me the Proper Solution on this.
Regards
Khanna

Hi,
Check this link
http://www30.sap.com/korea//services/pdf/Solman_4.0_Maintenance_Optimizer_Setup_Guide.pdf
you might have to use t-code SPRO
Regards,
Ramesh P
Message was edited by:
Ramesh Parashivamurthy

How to connect DMS to the Solution Manager

Hi,
I have a DMS system in our SAP Landscape.
I like to monitor this system in our Solution Manager.
After installation and registration of the DAA agent in the Solution Manager I can see the host,but I do not see the DMS or the SAP MAX DB.
How do I configure this?
thanks in advance,
Beni

Hi Beni,
Check out two of my documents in SAP Maxdb community to do this for MaxDB.
DBACOCKPIT and Solman Monitoring for MaxDB Database : How to Setup -I
DBACOCKPIT and Solman Monitoring for MaxDB Database : How to Setup -II
Also if you are using SAP content server on windows then you can monitor the application also, check out this note.
1895715 - System Monitoring Setup for SAP CONTENT SERVER
My DMS is running on linux/unix , and I can't see any technical monitoring templates provided in Solman to monitor it.I am on SP10 for Solman 7.1.
Even if you can't setup monitoring for Content server application, you can set it up for Maxdb as described in my documents.
Thanks and Regards
Amit

Regarding this issue in the configuration on smsy in the solution manager

hai all,
i am havig an issue when trying to configure the smsy in the solution manager
the issue is
Invalid user s0001234567 when calling SAP Backend system
all the rfcs related to the oss is fine
i had maintained the user in the aisuser tcode correctly
and then i router is finly working
software component : st is 400 kernel and level is18
hope all the experts of solution manger help me
thanks & regards
praveen kumar

Invalid user s0001234567 when calling SAP Backend system
Is it a valid S-USER?
Use valid S-USER and update the user details in AIUSER.
Regards,
Nick Loy

Deploy a web service with the deploy tool (J2EE)

Hi!
I want to deploy a web service with the Deploy Tool (J2EE 1.4).
(For info, I'm working on Win 2000.)
I have the following error when I'm trying to deploy:
distribute: C:\monHello2\monApp.ear
Deploy action running...
Deployment failed on target localhost:4848_server : Fatal Error from EJB Compiler -- jaxrpc compilation exception
!!! Operation Failed !!!
Someone can help me, please? What's the problem?
Other question: when I create the WAR file, I have to add : my interface class, my implementation class, my others java classes, my WSDL file and my mapping.xml file.
Should I add the .jar that is used by one of my class???? I think yes, but...
thank you and excuse me for my english... ;o)

Only primitive types can be returned? Is thatcorrect????
true - for more details check out section 3.4.1.3 of
this book which is available for purchase or online
http://java.sun.com/blueprints/guidelines/designing_w
ebservices/I meant to say primitive type and "special POJOs" called "JAXRPC Value Types" - check out the reference I listed

Picture uopload in the solution manager using BSP

Hi Everybody I am trying to upload a employee pictures for the each user in the Solution manager using BSP. I have got some coding form the help but its not working. Kindly direct me the way I can go for the upload.
Please help me out.
With best regards,
Suneetha

Hi Thank you very much for your answer.
I am using for the file upload code is
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<htmlb:content design="design2003">
<htmlb:page title = " ">
    <htmlb:form>
<html>
<body>
<h2> Form with File Upload and Download </h2>
Choose a file for upload. The file will be echoed to your browser if you
     select the checkbox below.
<form method="POST" enctype="multipart/form-data">
<table border=1 width="100%">
    <tr>
      <td> <input type=checkbox name="doEcho"> </td>
      <td> <input type=checkbox name="doEcho" value="X"> (select for echo)
</tr>
    <tr>
      <td> <input type=file name="echoFile"> </td>
    </tr>
    <tr>
         height = "45".
          width = "45".
      <td> <input type=submit name="onInputProcessing(upload)" value="Submit"> </td>
    </tr>
</table>
</form>
</body>
</html>
    </htmlb:form>
</htmlb:page>
</htmlb:content>
Can I use this along with oninput processing that u have given.
With Best regards,
Suneetha

How to get the Solution Manager Installer

Hello.
I am trying to install Solution Manager and then get the Solution Manager key.
*But I can't download the Solution Manager installation Program. I am searching the installer for a almost week
Please can anybody help me?

Hi,
If you are looking for installing solution Manager you need to have below softwares
1:IM (Installation Master)
2:Exports DVD's
3:Kernel DVD
4:JAVA DUMP
5:Database software
6:JCE Polic
7:J2SDK
If can find the same at service market place www.service.sap.com/swdc>Click on tab Installation and Upgrades>click on A-Z Index>Right side colum click on S>now select solution Manager,there you can find the list of softwares you are looking for.
Regards
Uday

How the solution manager is realated to SAP BW

Hi experts!
Well!! I have been given a task to work on solution manager 4.0 and make it useful for SAP BI.
so I have a few questions.
1) Does basis person look after the config and authorizations?
2) I have been told to include the system change request ( SCR), Help desk issues into the solution manager... so how can I get that.
3) where my role starts exactly, I mean after connecting SAP BI to Solution manager,I guess this is done by BASIS person.
Points will be rewarded to the helpful replies... thanks in advance.

Hi Abass,
To answer few of ur questions,
2) you need to configure the Solution manager tool with the BI system when a ticket is raised or a change is triggered. These things will be monitored by a help desk or service desk person or a BI expersie person.
I guess your role is to implement this in ur org that means you need to create from basics such as creating business partners etc
Regards
Srini

I'm attempting to access my work email through Microsoft Outlook web client. The URL is mail.ad.msu.edu. I get the following message: The website "mail.ad.msu.edu" requires a client certificate. This website requires a certificate to validate your id

I'm attempting to access my work email through Microsoft Outlook web client. The URL is mail.ad.msu.edu. I get the following message:
The website "mail.ad.msu.edu" requires a client certificate.
This website requires a certificate to validate your identity. Select the certificate to use when you connect to this website, then click Continue.
The choice I am presented with is: adp3d (iChat Encryption Certificate) (Apple.Mac Certificate Authority)
I'm thinking that this can't be correct, and in fact doesn't allow me to signing to the website.
How do I go about getting the proper certificate?

I'm attempting to access my work email through Microsoft Outlook web client. The URL is mail.ad.msu.edu. I get the following message:
The website "mail.ad.msu.edu" requires a client certificate.
This website requires a certificate to validate your identity. Select the certificate to use when you connect to this website, then click Continue.
The choice I am presented with is: adp3d (iChat Encryption Certificate) (Apple.Mac Certificate Authority)
I'm thinking that this can't be correct, and in fact doesn't allow me to signing to the website.
How do I go about getting the proper certificate?

Deploy Ic Web Client in the Solution Manager 4.0 SR2

Similar Messages

Maybe you are looking for