Deploy Integration Content menu cannot be found in Eclipse.
HI,
I m new to Integration and im doing HCI integration from Customer master form ERP to C4C using HCI(Eclipse Kelper).
when i right click on the Project im unable to find the "Deploy Integration Content" menu as shown in the figure.
Can any one suggest me .how get the Menu and
Can u any one provide me step by step procedure for the integration (ERP -C4C using HCI).
Regards,
Prasad
Thanq it was rectified
Similar Messages
-
SSRS SharePoint Integrated error, User cannot be found
We currently have setup an SSRS in SharePoint 2013 integrated mode. We got the error message below when we removed a user from the Groups and Members. I have found from searching the web that this is a bug that happens whenever the report creator has been
removed or deleted from the SharePoint site
System.Web.Services.Protocols.SoapException: Report Server has encountered a SharePoint error. ---> Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> Microsoft.SharePoint.SPException:
User cannot be found.
Since we are already using SharePoint 2013, I would have thought that this bug has already been fixed. I think it is pretty common to have the report creators leave the company and as a security to remove their profiles from the SharePoint site. Microsoft,
is there a solution to this?Hi Blusil,
Just as you said, this issue always occurred when user(s) missing or removed from the site that either authored or modified the report(s). As per my understanding, the solution of the issue is adding the user accounts back to the site or change the user
to another one in the site.
If the user had left the company, we can refer to the second solution that override the owner field using PowerShell for that report:
http://alexbrassington.com/2013/11/07/changing-modified-and-created-details-in-sharepoint/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Full error message:
An Integration Services class cannot be found. Make sure that Integration Services is correctly installed on the computer that is running the application. Also, make sure that the 64-bit version of Integration Services is installed if you are running a 64-bit
application
I have developed SSIS package in my development machine where the OS is 64 bit and sql server 2012 is installed.
The package has excel source and oledb destination. Excel files can be both .xls and .xlsx format. Since i want to run both xls and xlsx format i have installed
32 bit Microsoft Acess database engine form the below link, then both xls and xlsx format worked.
.xls - 32 bit
.xlsx - 32 bit and 64 bit is available. So in common i have to run it in 32 bit.
I have set Run64BitRuntime to False and ran package. it is working fine. I cannot set Run64BitRuntime to True and run the packages. Because i have office products installed on my machine which is 32 bit. if try to install 64 bit Microsoft Acess
database engine redistributable pacakage from below link , it is throwing error saying that, already office 32 bit product is installed so uninstall 32 bit product and install 64 bit.
Excel connection string is Ace database engine only. everything works fine.
microsoftcom/en-us/download/details.aspx?id=13255
Now i am trying to invoke package from c# code by using Microsoft.SqlServer.ManagedDTS.dll and it is also working fine in my dev machine.
When i deploy the web application in production am getting the error while invoking package. the full error message is posted in 1st line of this thread.
Then i tried to execute the package in production server by using dtexec utility, it is working fine. I tried both 32 bit and 64 bit dtexec utility by going to specific path (program files(x86) and Program files) via command prompt.
It is all working fine. So the error coming when i invoke from web application. My guess is ManagedDTS causing problem.
Where can i find 64 bit Microsoft.SqlServer.ManagedDTS.dll
or is it because of any other problem. i have checked below links, still problem not resolved.
social.msdn.microsoftcom/Forums/sqlserver/en-US/491384d2-02f7-4178-a1c3-bcbd58e57fce/an-integration-services-class-cannot-be-found-make-sure-that-integration-services-is-correctly?forum=sqlintegrationservices
forums.aspnet/t/1990417.aspx?Issue+deploying+SSIS+Package+in+production+web+server1) "I have set Run64BitRuntime to False and ran package" -> this is not valid outside of your development environment, it is made for simulation purposes as all the dev tools are 32 Bit
2) "Where can i find 64 bit Microsoft.SqlServer.ManagedDTS.dll " is basically SSIS. It is quite possibly the culprit. I am inclined to think you attempt to run the package where there no SSIS installed.
Arthur
MyBlog
Twitter -
When i click on the icon to open Firefox an error message box appears with the following message, C:\Program Files\Java\jre6\lib\deploy\jqs\ff\..\..\..\..\bin\jqsnotify\.exe cannot be found. It then advises me to use the Search function, but the search function says it is unavailable.
What is it? and how do I fix it? in EnglishSee:
http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0 -
I got CS4 software. When the first time i install, i chose the normal installation content. Then I found that there was no photoshop on the start menu. After that I try to put the disk into the notebook again and find that there is no photoshop listed on the "installation list"
download the cs4 design premium installation files and install ps using them,
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Report server running in integrated mode , but cannot deploy reports again and again prompts for login
Nur MondalHello,
How are you deploying the reports? Via Visual Studio, Report builder or manually uploading RDL files?
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS -
How to deploy the J2EE samples?? common.xml cannot be found
Hi folks,
I recently downloaded the J2EE packages and installed them successfully I think (Servlets and JSPs are presented correctly)...now I want to test the samples, that one can download from sun, because I want to find out more about ejbs and jms...
...I followed the instructions of the /docs-diractory in the samples, but I always encounter a problem, that the file common.xml cannot be found...
Here is exactly what I do:
-set the PATH environment variable to the /bin-
directory of the J2EE server
-go to the /src-directory of the sample
- run asant
==>then comes the error, that the file common.xml
cannot be found, which is not astonishing
because there is not such a file in the
sample' s directory.....and I do not what this file
is good for....and what structure it has...
What is my mistake?? Do I have to copy the sample-directories to a certain directory of the server???
Thanks for any help...ByeThe file common.xml is found in the directory Sun\AppServer\samples after you've installed the sun sample application server.
One thing that surely works is if you copy all samples into this directory and use asant to build them from there.
Jan -
Hi,
I am in big problem. I had deployed a web application on IIS 7.0 which have windows server 2008 r2 installed. We have some reports in web application. Everything is working fine in web application except when I export content feom SSRS reports to PDF or CSV
format then I am getting following message
Unable to open this Internet site. The requested site is either unavailable or cannot be found. Please try again later.
This message comes only on IE8 as I had installed Mozilla but that issue is not coming on Mozilla. I don't why this issue is coming and how to solve this issue. I had gone with every possible results which I found in google but noting seems to be helpful. Please
help me as it's urgent and I am deploying on production server.
Thanks...Hi Awadhendra,
This error usually occurs if IE is configured with the "Do not save encrypted pages to disk" advanced options setting or the server is using Secure Sockets Layer (SSL) and has added one or both of the following HTTP headers to the response message:
e.g: Response.AddHeader "Cache-control: no-cache" or “Cache-control: no-store”.
To solve this issue, please try to cancel the “Do not save encrypted pages to disk” option in the advanced internet options or setting the “BypassSSLNoCache” registry. For more details, please refer to
KB323308 .
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Package load Failed! Invalid package Title, manifest file cannot be found
Greetings. I am new to UPK and am seeking guidance on an upgrade to 11.1.
A little background on what we are trying to do:
We have two machines:
Windows 2003 machine in domain 'X' | UPK 11.0.0.1.
Windows 2008 R2 virtual machine in domain 'Y' | UPK 11.0 on the new machine first, install the 11.0.0.1 patch, and then upgrade to 11.1.
We are using the same database as the old machine. Developer Server is Standard Authentication, Knowledge Center is Windows authentication.
==========================================================================================
So far we have installed 11.1 with the respective database upgrades, but are lost as to how to migrate the old Content Root data. We have copied all the content to the new Content Root, added it to IIS like the old machine, and verified that the UPK database Content Root path is correct and working.
For the rest of the post, I am remoted into the server from my local workstation, and then using IE to access KCenter on the server's FQDN, not via localhost.
Since I am green, so I presumed that I would need to import the titles under Manager in KCenter. I zipped each content folder individually (they are named "1", "9", etc), and then attempted to import each zip file.
NOTE: At this stage sometimes we are prompted to authenticate again. When it does, sometimes the credentials that we know work, get rejected and we are prompted again. This will repeat until we get a 401 and we have to start over. We have verified that the Windows account currently in session with the site is valid and has administrator authority within KC.
NOTE2: On the first few tries, .NET complained that maxRequestLength was not large enough. I had our servers team increase it on the actual server in order for us to proceed.
Provided we don't have to authenticate again, or that it actually accepts our credentials, we get to the 30% mark and then receive the error: *"Package load Failed! Invalid package Title, manifest file cannot be found"*
Does anyone have any wisdom for this process? The title importation section in the deployment manual is not helping, and the administrator from whom I am taking over this software has not had to deal with this before.
Thank you,
Ian
Edited by: 986290 on Feb 5, 2013 10:21 AMHi Marc, thanks for the post,
I have gone through an extensive troubleshooting process with Oracle, including their development team, in order to fully complete our project setup. As a supplemental bit of information, we also were having connection errors when attempting to publish directly to the knowledge center.
As far as the context of this post, here is the solution in brief:
1) Verify that the package being imported was published from the same version of the Developer Client as the Knowledge Center installation's.
2) Check for database consistency issues. In our case we were using a database that was built in another domain. After numerous attempts with Oracle support on the line to determine the inconsistency, it was decided to completely reinstall and build a new database from scratch in the new domain.
3) Check application pool identities and access (while we had some inconsistencies here, correcting them did not change the behavior of the import/publish errors)
In review, a lot of what we had setup was correct. Our primary point of failure, we feel, was using the old database. Technically this should not have been a problem, but Murphy likes to get his way sometimes.
Cheers,
Ian -
Genius Error... The required file cannot be found. Please try again later.
To those users with Windows 7 and iTunes that cannot turn on Genius due to a 'required file cannot be found' or have begun getting the error stated above and can't find the solution.
Well the solution is on this post: http://discussions.apple.com/message.jspa?messageID=10554450 (Windows 7 RTM (Build 7600) and iTunes 9.0), but is more complex to put into practice than the mere command given on the post.
*You must disable (not just stop) the Branchcache service on windows _and reboot_* the machine for it to take effect, after that Genius will update without any problems.
If you like me and have a corporate notebook with Group Policy setting this service to run then you must disable it from the services menu within Administrative Tools in the Control Panel (rather than the command in the previous post).
If you don't have administrator access then you must speak with your IT department and have them disable it for you.
Now this is what really annoys me - *APPLE really should get their act together and fix this error, as it's caused by a conflict in between the Genius update routine and a genuine windows service and has been around since the release of Windows 7 (perhaps Vista)*. It really can’t be that hard to fix since it’s just a simple data exchangeI found more info here:
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/geni us-results-cant-be-updated-right-now/ab98e076-50a8-4dd0-b9d1-ee4399030236?page=1 &tm=1322094589886
It looks like updating Match and updating Genius are both incompatible with the branchcache service. I disabled the service, and was able to fetch Genius and Match info to this PC. I then re-enabled branchcache, and once again, "update (Match, Genius)" fail with this error message--however, I can play my Cloud library from the PC, I just can't update its contents. -
Captivate videos created in RH9 cannot be found in RH11
We just upgraded from RH9 to RH11 and our Captivate videos now have errors "file or directory cannot be found". Any ideas?
Hmmm, was the captivate video added as an element in an existing Topic page? Or was it added to the project where you import the Captivate HTML page?
Here's my thinking. The link seems to be attempting to open an HTML page that doesn't exist for whatever reason. Unfortunately there are many ways you may have created that link.
Have you tried adding the content as Baggage? Perhaps that's the answer here. To add as Baggage.
In your Project Manager pod, try right-clicking the Baggage Files folder and adding that way. If you don't see a folder named Baggage Files, the right click action should present Baggage File on the context menu after you click New.
Cheers... Rick -
When I go to play a movie, I get prompted that the original file cannot be found. When I do a search on spotlight it cannot be found, but it does appear in my purchases. How do I re-download when it does not appear that it is allowed?
Hello paddyrb154,
Thank you for the details of the issue you are experiencing with your purchased movie in iTunes on your iMac. It sounds like iTunes thinks the movie is on your computer, but it is not located in the iTunes Media folder.
For an issue like this, I recommend deleting the movie from iTunes and downloading it from the iTunes Store again. Use these steps to delete the movie:
Mac or PC
Launch iTunes.
From the Library pop-up menu, choose Movies.
Click Movies in the navigation bar.
Click the movie you want to delete.
Press the Delete key on your keyboard.
In iTunes 11, the movie cover art will remain visible, but a cloud icon will appear on it to allow you to download the item again (in countries that support this).
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Once you have deleted the movie, you can click on the cloud icon to download the movie again. If you do not see the cloud icon, use the steps in the section titled “Download previous purchases on Mac or PC ” in the following article to download the movie from your list of past purchases in the iTunes Store:
Download past purchases
http://support.apple.com/kb/ht2519
Thank you for using Apple Support Communities.
Best,
Sheila M. -
The specified store provider cannot be found in the configuration, or is...
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
All,
I have a solution developed in Visual Studio 2012 targetting .Net 4.0. Simplified: Startup project is a WPF library and supporting this library is another project that uses Entity Framework to retrieve data. I have copied the connection strings from my EF project to my startup project, and everything seems to work fine on the development machine.
However, as sson as this project is run on a user's desktop they get the error:
System.ArgumentException
The specified store provider cannot be found in the configuration, or is not valid.
Stack trace (transcribed from screenshot, so there might be typos):
at.system.Data.EntityClient.EntityConnection.GetFactory(String providerString)
at System.Data.EntityClient.EntityConnection.ChangeConnectionString(String newConnectionString)
at System.Data.EntityClient.EntityConnection..ctor(String connectionString)
at System.Data.Entity.Internal.LazyInternalConnection.InitializeFromConnectionStringSetting(ConnectionStringSettings appConfigConnection)
at System.Data.Entity.Internal.,LazyInternalConnection.TryInitializeFromAppConfig(String name, AppConfig config)
at System.Data.Entity.Internal.LazyInternalConnection.Initialize()
at System.Data.Entity.Internal.LazyInternalConnection.CreateObjectContextFromConnectionModel()
at System.Data.Entity.Internal.LazyInternalContext.InitializeContext()
at System.Data.Entity.Internal.InternalContext.GetEntitySetAndBaseTypeForType(Type entityType)
at System.Data.Entity.Internal.Linq.InternalSet` 1.Initialize()
at System.Data.Entity.Internal.Linq.InternalSet` 1.get_InternalContext()
at System.Data.Entiy.Infrastructure.DbQuery` 1.System.Linq.IQueryable.get_Provider()
at System.Linq.Queryable.Where[TSource](IQueryable` 1 source, Expression` 1 predicate)
at MyEntityNameSpace.MyEntitySet.LoadData()
I've already verified that Oracle.DataAccess is referenced in my EF project, and I'm including oci.dll, orannzsbb11.dll, oraociei11.dll, and OraOps11w.dll in my main library (fat installation).
This configuration worked when using the older ADO.Net DataSets, but now I want to use EF 4.4 (DataBase first/model first/whatever it's not Code First) because it's just easier to code against. So obviously I'm missing something when it comes to deploying my solution. Any ideas?
Note that this is a desktop application using MS OneClick.Same issue:
The specified store provider cannot be found in the configuration, or is not valid. ---> System.ArgumentException: Unable to find the requested .Net Framework Data Provider. It may not be installed.
You mention "Sounds like the client system doesn't have an Oracle client installed."
I am using Win Server 2008 R2. I have installed what i think is the right client. How do i tell?
What is the right client? Where do i get it? -
"Cannot open Help. The file cannot be found." Error on Treo Pro
I can see a support item listed on my phone when I try to search the Help files, but when I click on that item, it gives me an error message, "Cannot oepn Help. The file cannot be found."
I am trying to block telemarketer calls, and it looks like there is a way to do it. Two help references come up - "Setting Options for rejecting calls" and "Blocking Calls." I just can't access them.
Thanks in advance!
Shan
Post relates to: Treo Pro T850 (Sprint)From the Owners Guide http://www.palm.com/us/support/handbooks/treopro/treoproT850E_UG.pdf But I dont think its what your looking for.
Setting options for rejecting a call By default, when you reject an incoming
call, the caller is sent to voicemail. You can
change this setting so that, in addition to
sending the caller to voicemail, a text
message opens. This message contains
default text and is addressed to the caller
so that you can send the message right
away. You can also change the default text
of the message.
1 Press Start and select Settings.2 On the Personal tab, select Phone .3 Select the Advanced tab.4 To turn on the text message feature, check the Reject call with text
message box.
5 (Optional) To change the content of the message, select the text in the box and
enter the text you want.6 Press OK . -
10.4.6 and Active Directory Problem - Volume cannot be found??
I have bound six 10.4.6 to active directory. All went sweet with no problems. I have "force local home folder" off in Directory Access for AD. I can login to the Mac no problem using any user account from AD. If I login with a user the first time all goes well. The desktop icons show and the home directory is that of the users network home folder and can browse it. All good until I log out and login again. I get the desktop icons but the users home directory give the error "The Volume for %username% Cannot be found" when trying to access. I can browse the network to the user home folder without having to authenticate. The server (2003) shows no login errors, all looks fine. I have upgraded one Mac to 10.4.7 but made no differnce.
I have installed "services for Mac and Appletalk" on the server but from what I have been told this shouldn't need to be installed but I did as I was getting no where anyway.
Any ideas?
PowerPC Mac OS X (10.4.6)Hi Chris!
Before I comment, I want to define a couple of things. A "Mac home folder" stores a user's files (Documents, Library, etc.). This home folder can be stored locally on the workstation or it can be stored on a server. A "Windows home folder" is defined in a user's Active Directory account and can be used as the Mac home folder or simply as a network user folder for storage.
While the idea of a network-based Mac home folder is nice, it can be clunky simply because the entire user experience is dependent on network speed and/or good file synchronization between your server and workstation. As someone who works in a group supporting about 300 Macs, I suggest enabling local home folders and not using a network-based Mac home folder.
Next, File Services for Macintosh (AFP protocol) built into Windows Server will not support network-based Mac home folders. This is a dead end. You can install a third party product from Group Logic called ExtremeZ-IP, which does support network-based home folders over AFP.
Therefore, what's happening in your network is that the network-based Mac home folders are being mounted via the SMB protocol, which uses Windows style file sharing. SMB in Mac OS X is good for limited use but I wouldn't recommend it for extensive use, which would include network-based Mac home folders.
Here's what I suggest for your AD settings: 1.) Enable local home folders. 2.) Connect via SMB. This will keep your users' Mac home folders local to the machine but if their Windows network home folder is properly defined in their AD account settings then these should automatically mount on the Desktop via SMB at login.
If you can get your Windows home folders to mount automtically on the users' Desktops then you can experiment with synchronization. After logging in, each user can visit Apple menu --> System Preferences... --> Accounts and the synchronization options will be available. A user can synchronize all or part of his local Mac home folder to his mounted Windows home folder.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.7)
Maybe you are looking for
-
I need to buy a cable to install an SSD in my Envy 17-j029nr. HP ENVY 17 Notebook PC Product: E0K90UA#ABA Warranty: 2y2y0y Model: 17-j029nr Rev: 1968 - 100 Questions: What is the part number? Where can I buy it? Is there a supplier other than HP? Any
-
I have an Intel Desktop iMac and I am upgrading from Tiger to Snow Leopard. I keep getting an error when it tries to load the Mac OS X update combined. It says that it was corrupted during download. Have try loading from Apple website Mac OS X V10.6
-
Hi Experts, I have a client who needs a Report that show the Item availability and what Sales Order makes up the 'Committed Stock' and what Purchase Orders make up the 'Ordered Stock' quantity in the Item Master Inventory tab. Here is what I did so f
-
RE: File Size Reduction by Hiding Layers
I've come across the trick of hiding layers to reduce file size, however am wondering exactly what is happening. Here's my situation. 20.6mb PSD Hiding the layers reduces the file to 13.1mb I've been told that the file reduction is because preview im
-
I am getting the error when I am going to do the goods in transit .I got the error .this is the path /GLB/RGTFC00_M2MCOGS >Configuration > Customize Postings > Goods in transit can anyone tell me the solution.I am sending this error no relationship