Deploy Libraries VI with the progress bar

When I right-click>deploy all a vi pops up that displays a progress bar while the shared variables are being deployed. However, if I use the Deploy Libraries VI from the DSC module I do not get a progress bar.
I really need a progress bar. I have a huge number of SV's and really want my users to know that the system is actually doing something during the long wait.
Thanks in advance.
PaulG.
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell

Hi Paul,
I have not tried it, but you might be able to use the 'Commit Shared Variables' vi to manually deploy each variable to the SVE. This way you could easily loop through the libraries and
display a running list of variables or a progress bar. I am not sure if the SVE will automatically create a process for you or if that is something you will also have to do with another DSC
vi that is available for that purpose.

Similar Messages

HT1212 My ipad mini has been crashing a lot recently so I started a system reset. However, it's now stuck with the progress bar less than a quarter gone: this has been the case for several days now. I have tried resetting from itunes but it needs the pass

Now it's stuck with the progress bar less than a quarter full. I have also tried resetting through itunes which works right up to the point where itunes states that it needs the passcode to be inputted into the ipad to connect to it. At which point it then sticks at the same progress bar point. HELP!! please, this ipad is really important to my work.

Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
Its a shame you have to go through what you going through.
Good Luck

HT1451 I am trying to restore my iphone but its stuck at the apple logo with the progress bar. What should I do?

I am trying to restore my iphone but it has been stuck at the apple logo with the progress bar and it shows no signs of loading at all. What should I do?

Hello kuukua.b,
Thanks for using Apple Support Communities.
Please try to restart and reset your iPhone by following the steps below, and then resume your restore process.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Take care,
Alex H.

Problem with the progress bar

I've have a problem with the progress bar of my ipod. I bought a 5th generation ipod about 8-9 months ago. Now its progress bar stuck so it only shows the 5 dots. It doesn't show both scrubber bar and song time bar. When I press the center button, the 5 dots dissappear from the screen and then reappear but it doesn't show the other bars. Do you know what is the problem and How can I fixed it?

have you tried resetting ipod, cause as far as i know, this is sometimes just a temporary glitch, mine does this.

When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

http://osxdaily.com/2014/10/17/os-x-yosemite-installation-stuck/
also use the Command-L to view logs during installation

HT4623 My iphone had an error while updating and is now locked up on the apple screen with the progress bar

Itunes was updating my phone from 6.01 to 6.1 and it came up with an error. I closed the error not thinking about it and now my phone is locked up on the apple screen with the progress bar on it.

hi i tried to update my iphone 3gs from ios 4.1 to 6.1.2, while doing the same i got an error message (-5000) which i ignored an continued. it was almost about to complete while my itunes is not able to detect the iphone kindly help.

After a reset of settings on IPad2 it turns "on" but i only get to the logo screen with the progress bar under it. so it turns on to logo then to progress bar screen then off. and repeats over and over

Well as I said in the "question", I did a reset of the settings on my IPad2. however when it powered back on from resetting. it lets the the logo screen with the progress bar under it. The progress bar gets about 1/4 of an inch from the left then stops. After a few mins Ipad shuts off then turns on to the logo screen, then goes to the logo/progress bar screen, does whats said above, then off. That cycle just repeats over and over. Any help with this would be appreciated.

Recovery Mode Step by Step
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
On Computer
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. iPad Recovery Mode on computer screen
8. Select "Restore iPad"...
9. Select "Restore and Update"
10. Extracting Software.
11. Preparing iPad for restore.
12. Waiting for iPad.
13. Verifying iPad restore...
14.Restoring iPad software.
15. Verifying iPad software.
16. Verifying iPad Restore...
17. Restoring iPad firmware...
18. Your iPad is restored to factory settings; keep iPad connected to computer
19. Activate iPad
20. Enter Apple ID and Password
21. Continue
22. Welcome to Your New iPad
(a) Set up as new iPad (b) Restore from this backup (select from list of backups)
23. Restore from this backup
24. Continue
25. Restoring iPad from backup
26. The settings of your iPad have been restore; keep iPad connected to computer
27. Syncing iPad (Step 1 to 5)
28. Preparing apps to sync
29. Copying 1 of 9
30. Sync apps, movies and music to iPad
31. Finishing syncing
32. Eject iPad

My iPhone 4S got stuck on the apple logo with the progress bar!

Afternoon. My iPhone 4S got stuck on the apple logo with the progress bar! but every time after I restore the 4S the progress bar starts again and stops at different stages of the loading process! Can anyone help with this please?
All this started happening after I tried to download the lastest update (iOS 7.1). The 4S went and got stuck on the apple logo and progress bar!!

Hello kuukua.b,
Thanks for using Apple Support Communities.
Please try to restart and reset your iPhone by following the steps below, and then resume your restore process.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Take care,
Alex H.

Internet recovery gets stuck on the spinning globe with the progress bar below.

Hello Everybody!
I'm trying to fix the iMac (27-inch, Mid 2010) of my friend. He said it doesn't boot anymore and just gets stuck on the grey screen with the Apple logo and the spinning wheel below. So my first step was to go into the Startup Manager by pressing the Option key after the chime. There I was presented with the Macintosh HD and the Recovery HD. After selecting the Recovery HD to access the Disk Utilities I got stuck on the grey screen with the Apple logo and the spinning wheel again. So I guess the data on the drive is corrupted and might have to be replaced. But before I do that, I wanted to give the Internet Recovery a try. I connected the iMac to the internet using an ethernet cable and pressed Command + Option + R after the chime and the spinning globe appeared with the info: "starting recovery process from network. This may take a while". After a short time the sentences are replaced by a progress bar and a timer that is counting up. The progress bar then moved for a tiny little bit and then nothing happens anymore but the timer keeps counting up. I waited for quiet some time before I gave up. I did not get any errors so I can't provide any other useful information. Can anyone give my some advice? I read in other posts that the ISPs of specific countries block ports which are needed for the internet recovery. I'm in Thailand right now. Does anyone know if that might cause the problem?
Thank you for all your help!

Neither we nor Apple support jailbroken iDevices.

HT4623 so i downloaded the iOS 7 onto my computer. then wanted to upgrade. iTunes is waiting to connect to the phone after the restart. now it's stuck in the black screen with the white apple with the progress bar. then i look to iTunes and found out it s

so i downlaoded the iOS 7 onto my iTunes. then i wanted to upgrade. the phone is stuck in the black screen with the white apple and the progress bar. next time i click on iTunes, it says my phone "has an error and cnanot update" and now it is stuck on the black screen with the white apple and the progress bar almost finished. hasn't moved in 20 minutes.

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

Problem with the progress bar in swings

Hi all,
I need to show a progress bar till another window opens up in swings.Below is the code i used to show the progress bar.My problem is i am able to get the dialog box where i have set the progress bar but i cldnt get the progress bar.But after the specified delay,another window gets loaded.
Plz tell me how to show a progress bar till another window loads.Any help is greatly appreciated :-)
                //Show the progress bar till the AJScreens loads.
                // Create a dialog that will display the progress.
                final JDialog dlg = new JDialog(this, "Progress Dialog", true);
                JProgressBar dpb = new JProgressBar();
                dpb.setVisible(true);
                dpb.setStringPainted(true);
                dpb.setBounds(70,60,150,10);
                dlg.getContentPane().setLayout(new BorderLayout());
                dlg.getContentPane().add(BorderLayout.CENTER, dpb);
                dlg.getContentPane().add(BorderLayout.NORTH, new JLabel("Progress..."));
                dlg.setDefaultCloseOperation(JDialog.DO_NOTHING_ON_CLOSE);
                dlg.setSize(300, 75);
                dlg.setLocationRelativeTo(this);
                // Create a new thread and call show within the thread.
                Thread t = new Thread(new Runnable(){
                    public void run() {
System.out.println("atleast comes here --->");
                        dlg.show();
                // Start the thread so that the dialog will show.
System.out.println("Gonna start the thread --> ");
                t.start();
System.out.println("Thread started --> ");
                // Perform computation. Since the modal dialogs show() was called in
                // a thread, the main thread is not blocked. We can continue with computation
                // in the main thread.
                for(int i =0; i<=100; i++) {
                    // Set the value that the dialog will display on the progressbar.
System.out.println("i ----------> "+i);
                    dpb.setVisible(true);
                    dpb.setValue(i);
                    try {
                        Thread.sleep(25);
                    } catch (InterruptedException e) {
                        e.printStackTrace();
                // Finished computation. Now hide the dialog. This will also stop the
                // thread since the "run" method will return.
                dlg.hide();regards,
kani.

Yeah i have tried that also.But no hope.
My problem is am able to get the dialog box but not the progressbar,after the specified delay the dialog box goess off and the new window loads up.
the progress bar is not getting displayed..that is my problem..
can u plz help me out.

I'm trying to download Mavericks. It appears in my launchpad with the progress bar underneath it. A tiny part has downloaded but the rest won't download for some reason. What is wrong?

A fraction of the progress bar has filled up and won't go any further. What should I do? What is wrong with it? It is not my internet connection as I have downloaded three games off Steam today perfectly. I have also checked the specs and they're fine.

Check the Purchases tab in the App Store. If it shows a Resume button, click on it. It should also show the progress there.

Playback keeps looping saying loading... loading... loading... after scrubbing with the progress bar

I have 2 Captivate 5 SWF files that I am loading in a popup window from a webpage on a CDROM.
I built the presentations in Captivate 5 using embeded FLV files. When I try scrubbing forward, or anywhere else on the timeline and hit the Play button I keep seeing Loading... appear and then a few seconds of video plays and it says Loading... again and goes to where I first clicked on.
How can I fix this bug so that after I scrub to a pint in the timeling and click play it only says Loading... once and continues playing?

Hi jieri,
did you try to use FireBug to see if there's any problem in JS? Maybe there's some conflict with jQuery and the files you've imported.
Br,
Marko Goricki
http://apexbyg.blogspot.com/

Splash Screen with a progress bar at the bottom

Hi,
I want to display a splash screen with the progress bar at the bottom just like eclipse , limewire etc
Take a look at the image below.
[http://imageupload.com/out.php/i138889_splashScreen.png]
Can anybody tell me how to achieve this type of splash screen?
Thnx in advance.

Search Google.
This is one of the results: [Splash screen avec progress Bar|http://www.labo-sun.com/resource-fr-codesamples-1126-0-java-gui-splash-screen-avec-progress-bar.htm]

HT201210 I tried to update my iPod to the latest version and it didn't complete. says it could not be updated and my iPod froze with the apple icon and the progression bar. it won't go away. iTunes doesnt recognize the device.

I tried to update the latest version for the iPod touch and it couldn't complete the install. my iPod screen had the apple icon with the progression bar when it couldn't update and it stuck there. iTunes doesn't recognize my device.
How do I restore, if iTunes doesn't see my iPod?

Plug your device into iTunes. Hold the home & sleep buttons at the same time. After 10 secs release the 2 buttons. iTunes will tell you it's found a device in DFU mode. The iPod screen will stay black. At this point do a restore. If you see the Apple logo you have held them for too long.

Deploy Libraries VI with the progress bar

Similar Messages

Maybe you are looking for