Deploy Monitoring reports Fail Cannot get the ReportServerWebService URL

Hi, I am deploying the monitoring reports in a single host different to FE or Backend
When I launch the wizard the installation fail with the message:
> Deploying Monitoring Reports... This might take a few minutes.
The Monitoring Database is using SQL instance "mendbsql3\ARCHLYNC2013".
The data source is using SQL instance "(local)\ARCHLYNC2013".
System.Runtime.InteropServices.COMException (0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr
errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException (0x800700A4)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()Cannot
get the ReportServerWebService URL. Verify that Reporting Services is deployed and configured properly on the target SQL instance:"mendbsql3\ARCHLYNC2013", and that WMI is included on the exception list of firewall setting on the server that is running
Reporting Services.
I check the configuration of the reporting services configuration, all see OK. I probe the URL in the server that I want to configure like a monitoring reporter
and I can explorer and administrate the Reporting Services. The firewall into the servers is off.
Somebody else have this problem.
THX.

Hi Lapatinogo
This is how I install Monitoring in my lab series.
http://lyncme.co.uk/microsoft-lync-server-2013/the-complete-home-lync-lab-part-3-installing-lync-2013-monitoring-and-lync-edge-server/
Navigate –> Lync Server –> Your Site –>
Lync Server 2013 –> Standard Edition Front End Servers –>
Your Server
Right Click –> Edit Properties –> Scroll Down to Monitoring
Tick Monitoring –> Press New –> Enter your
SQL Server FQDN –> Specify your instance –> Untick
This SQL instance is in mirroring relation (As stated in Part 1 you should already have a SQL Server with an instance available) –> Press
OK
Press OK –> Press Action –> Press
Topology –> Press Publish
Press Next
Press Next –> This should complete successfully –> Press
Finish
Launch Lync Deployment Wizard
Press Yes –> Click Deploy Monitoring Reports
Press Next
Press Specify a User Account and Password that has rights to the instance –> Press Next
Press Specify User Group (I will be using the default group) –> Press
Next
Press Finish
Launch the Lync Server Control Panel
Login with an account that is apart of the CSAdministrator
Click View Monitoring reports –> Click your SQL Server FQDN
You should now see the below window Successful deployment of Lync Monitoring

Similar Messages

Cannot access external data , Failed to get the document information.

Hi All,
In my dashboard there are live office connections which has optional prompts defined in SAP BI. I have bound the cells to these prompts in live office object properties.
There are no errors while refreshing the LO connections from excel sheet.
But when i run that dashboard and give BLANK value for that prompt then it throws the error :
Cannot access external data , Failed to get the document information. (LO 26315).
Reply highly appreciated.
Thanks & Regards,
DJ

Hi Hardik,
I am building a similar solution as yours connecting webi reports to Bex queries and reading the webi data through live office into the dashboards. I am using almost similar versions as yours - BW 7.1 SP5, BO 4.1 SP4, Dashboards and Live Office SP4 versions. I am facing issues setting up the live office connections itself. I create the Live office connections within an excel and when I try to import this excel spreadsheet into my dashboard designer, it runs forever and crashes.
Could you please list out the steps you performed to get the Dashboard to preview live office data? Do you have OLAP connections for BW cubes and created WebI reports using these connections or You created a Universe on top of the Bex Queries?
It would be great if you could share the steps performed.
With respect to your issue, check if the report engine service is running. Do you have any error message details apart from this error?
Thanks.
Regards,
Rohini.

Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...

Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...Any ideas? Thanks

Hi Alxx911, and John Hammer1. After reading John's reply - " You can plug something into it's headphone jack. though" . I thought i'd try out of curiosity. I plugged in some headphones. I didn't expect anything to happen and nothing happened. The audio jack is for the Dell soundbar which is optional.
Here's a direct copy and paste from the users manual: Section About Your Monitor.
Attaching the Soundbar AX510 / AX510PA (Optional) CAUTION: Do not use with any device other than the Dell Soundbar. NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar AX510/AX510PAonly. To attach the Soundbar: 1. Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. 2. Slide the Soundbar to the left until it snaps into place. 3. Connectthe Soundbar with the DC power connector. 4. Insert the mini stereo plug from the back of the Soundbar into the computerís audio output jack. For HDMI/DP, you can insert the mini stereo plug into the monitorís audio output port. If there is no sound, check your PC if the Audio output is configured to HDMI/DP output.
This monitor has no speakers. (Like John Hammer1 mentioned). The no speakers feature was one of the reasons I chose this monitor.
Good Luck !

I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac.

I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!

I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!

Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report

When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?

>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you

CR4VS2010 Load Report failed - COMException (0x800001f5): The Report App...

Hello,
My company recently decided to start using the 64 bit CR VS2010. Several machines have installed it and are working correctly, but others get Load Report failed - COMException (0x800001f5): The Report Application Server failed error when trying to render a crystal report to a new application window. This happens when running the app through VS2010 or IIS.
Another issue, is that once CR4VS2010 is installed, the ability to check-out .rpt files through TFS no longer works. CR4VS2010 will open the .rpt, but manual check-out is not allowed for some reason.
Machines are running Vista 64 bit Ultimate, VS2010, Crystal XI R2 SP4, and TFS.
So far I have tried re-installing VS2010 and CR4VS2010, but still get the same issues.
All help is greatly appreciated.
Thank you.

Hello,
Please one question per post, makes it a lot easier to follow. Post your TFS question in a new post.
Use Process Monitor and compare logs between working and non-working PC's. Typically either missing dependencies or permission issues. Look for Access Denied errors.
Thank you
Don

Deploying Monitoring Reports - consolidated SSRS

Hi all
is it possible and supported to deploy monitoring reports on SSRS instance that already is configured with reports for other applications (sharepoint, MBAM...)?
the only reference about this topic I could find is
http://joostvanlier.wordpress.com/category/reporting-services/ where it is stated:
"It is possible to combine reports for various applications on a single instance of SQL Server reporting service, it is also possible to create various instances for the various reports. "
tnx in advance!

Hi,
Here are other good tips for installing the Lync Monitoring Reports:
http://blog.insidelync.com/2013/05/5-tips-for-installing-the-lync-2013-monitoring-reports/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

BO XI 3.1 : Active Directory Authentication failed to get the Active Directory groups

Dear all
        In our environment, there are 2 domain (domain A and B); it works well all the time. Today, all the user belong to domain A are not logi n; for user in domain B, all of them can log in but BO server response is very slowly. and there is error message popup when opening Webi report for domain B user. Below are the error message:
       " Active Directory Authentication failed to get the Active Directory groups for the account with ID:XXXX; pls make sure this account is valid and belongs to an accessible domain"
      Anyone has encountered similar issue?
   BO version: BO XI 3.1 SP5
   Authenticate: Windows AD
Thanks and Regards

Please get in touch with your AD team and verify if there are any changes applied to the domain controller and there are no network issues.
Also since this is a multi domain, make sure you have 2 way transitive forest trust as mentioned in SAP Note : 1323391 and FQDN for Directory servers are maintained in registry as per 1199995
http://service.sap.com/sap/support/notes/1323391
http://service.sap.com/sap/support/notes/1199995
-Ambarish-

I have a problem with my iPhone 4s. An Apple rep looked at the phone today and determined the phone will have to be replaced. I am trying to back up my data on the phone to iTunes but I cannot get the phone to power up.

I have a problem with my iPhone 4s. An Apple rep looked at the phone tonight and determined I will need a new phone. I am now trying to back up my data to iTunes but I cannot get the phone to turn on. I have it plugged into my computer monitor but it just slowly flashes the Apple symbol. Any ideas on how I can get it to power up for the backup?

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

Failed to get the document information (LO 26315)

Hi,
I have to create an Xcelsius dashboard where I use a Live Office connection based on a WebI-report. The WebI is created on top of a BEx Query.
I need to pass 12 parameters to the WebI-report in orde to get the correct data.
Everything works fine in design-time, but when I want to preview the dashboard, I get the error: Failed to get the document information (LO 26315).
After investigating the issue, I've noticed that everything works fine when the parameters I have to pass, are only created in the WebI-report. But in my case it is a BEx variable that causes the error.
There is no possible way that I can recreate the BEx variable in the Universe (There are restricted key figures, calculated key figures and cell restrictions in the BEx query).
My question: is there a way to pass a parameter from an Xcelsius dashboard to a WebI-report via a Live Office connection to a BEx variable?
Lieven

Fred,
on the SAP Notes Search page on sdn.sap.com, you can enter the note number in a text field at the right side of the page, just above the Search Option part.
Just enter Note 1357924 in that text field and press the blue icon with the arrows next to it. Thiw ill show the corresponding note.
Lieven

I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?

I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the OS X Yosemite 10.10.3 Combo Update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

LG TV LW Series, cannot get the ringtones to work ...

LG TV LW Series, cannot get the ringtones to work in skype.
Problem video:
http://youtu.be/KHDER90V1ps

I Have the same issue and i can't find a solution
İskender wrote:
Friends will report the problem I do not know where I am sorry.
See a specialist who are interested.

Failed to get the Availability State on server Distriubtionpoint1 for role SMS Distribution Point

Distriubtionpoint1-- Server share distribution point
Distriubtionpoint1-- Acting as site system role (DP)
Distriubtionpoint1--attached under the primary PR0 (Primary server0)
Primary server0-- reporting to CS0 (central site 0)
Distriubtionpoint1-- Windows 2008 sp1 r2 standard
Infrastructure details:-
=============
Distriubtionpoint1 located in different domain with one way trust.
1) Check ping status with FQDN from both domain and it is success.
2) Check port 135, 445, 80,443 through telnet from both domain and success.
3) Primary Server0 account is member of the local admin group on Distriubtionpoint1.
4) Check the PR0-SCCM-DP$ folder NTFS & Share permission
Share permission
a) everyone & local admin group has full control
Security permission
a) System has full permission
b) user has read & exec
4) Local admin full
Sitestat.log error message:
---->: Failed to get the Availability State on server
Distriubtionpoint1 for role SMS Distribution Point. SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:15 PM 952 (0x03B8)
---->: Now polling via NAL for SiteObject "["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\" SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:15 PM 952 (0x03B8)
for ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\, no connection account is available SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:15 PM 952 (0x03B8)
---->: The NAL path ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\ is currently not accessible. SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
Info>: Unable to get available space for the Site Object ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\ SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
STATMSG: ID=4701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_SITE_SYSTEM_STATUS_SUMMARIZER" SYS=Distriubtionpoint1 SITE=PR0 PID=4112 TID=952 GMTDATE=Wed Apr 23 01:00:18.002
2014 ISTR0="\\Distriubtionpoint1\PR0-SCCM-DP$" ISTR1="\\Distriubtionpoint1\PR0-SCCM-DP$" ISTR2="2014 04 4 17 04 31 31 000" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=0 SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:18 PM 952 (0x03B8)
for ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\, no connection account is available SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
---->: GetOperationsManagementData failed to connect to ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\; error
= 5. SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:20 PM 952 (0x03B8)

I have tried to access the server share DP from the primary server by using my user
credential. Yes I can able to access the share.
But when I use the system credential to access the share received an error message as shown in below screenshot
Hence i have provided the share and ntfs permission administrators, system, everyone,
primary server account with full control on both tab. but still i am receiving error message.
:\temp>whoami
US\prasath
c:\temp>dir \\PrimaryServer1\SCCM-DP$
Volume in drive \\PrimaryServer1\SCCM-DP$ is Data
Volume Serial Number is 22F0-661B
Directory of \\PrimaryServer1\SCCM-DP$03/17/2014
03:33 PM <DIR> .03/17/2014 03:33 PM <DIR> .
04/01/2014 08:04 AM <DIR> SMSPKG
0 File(s) 0 bytes
3 Dir(s) 514,625,064,960 bytes free
===========================================
C:\Windows\system32>whoami
nt authority\system
C:\Windows\system32>dir
\\PrimaryServer1\SCCM-DP$
Access is denied.

I cannot get the followed links colors to work in 24 for some reason.

I have just downloaded to v24, and now I cannot get the colors to work for the followed links on a web page. I have checked the settings on my other computers running windows 7, but those settings will not
work on my laptop running windows 8. In my previous firefox version it worked fine, but fails in v24. Any help would be appreciated.

Are you setting the link colours from inside the Firefox options?
Some website have their own link colours programmed and will override your specifications.

I cannot get the Quicktime plugin to update from v7.7.3 to the CURRENT 7.6.6 . My plugins view tells me I'm at risk and need to update but try as I might, it won't take. I consider myself and above average Mac User. Please advise. Thank you

for some inexplicable reason, I cannot get the Quicktime plugin to update from v7.7.3 to the CURRENT 7.6.6 . My plugins view tells me I'm at risk and need to update but try as I might, through all the known update avenues, it won't take. I consider myself and above average Mac User. Please advise. Thank you

Someone recently noted a problem staying logged on the Huffington Post since it became connected with AOL. The workaround for that is to change your connection setting here:
orange Firefox button (or Tools menu) > Options > Advanced > Network
Click the "Settings" button and choose either "No Proxy" or "Use System Settings" option, and OK the change.
Not sure whether Washington Post could be affected by that same setting.
In reviewing your extensions, I'm puzzled that you have both DoNotTrackMe and SavvyConnect. The first one seems to aggressively block certain communications with websites (potentially affecting functionality) while the second one seems to report on your browsing habits (they better pay well is all I can say). Have you tried disabling both of those to see whether that has any effect?
orange Firefox button (or Tools menu) > Add-ons > Extensions category

Deploy Monitoring reports Fail Cannot get the ReportServerWebService URL

Similar Messages

Maybe you are looking for