Deploy Oracle EBS R12.1.3 on Internet

Platform: HPUX Itanium
Application: 12.1.3
Database: 11.2.0.3
URL: http://application-hostname.domain:8000
Requirement/Scenario:
We need to provide access of our application to external users on internet out of the local intranet. We can enable SSL for this but management is concerned in exposing the Application server to intrnet users and the users reequest should be redirected to Application node through some other server whose URL will be published on internet.
So what are the avaiable Oracle solutions to achieve this? Thanks in advance.
Regards,
Umair.

Hi Umair,
Please refer note:
Securing Oracle E-Business Suite for Internet Access by Suppliers (Doc ID 243324.1)
Secure Configuration Guide for Oracle E-Business Suite Release 12 (Doc ID 403537.1)
In addition also see note:
Secure Configuration Guide for Oracle E-Business Suite Release 12 (Doc ID 403537.1)
Secure Configuration of Oracle E-Business Suite Profiles (Doc ID 946372.1)
Using the Oracle Wallet Manager Command Line Interface in Oracle E-Business Suite Release 12 (Doc ID 376694.1)
Hope this helps!
Best Regards

Similar Messages

How to deployed jsp report to Oracle EBS R12

Hi,
The jsp report deploy using Oracle Report. How to deploy the jsp report to Oracle EBS R12 and calling jsp report through Self-Service Menu.
Thank you.
Wilson

Hi,
What tool you have used to develop those pages?
Please see the docs referenced in this thread.
I want to start OAF R12 please give me PDF
I want to start OAF R12 please give me PDF
Thanks,
Hussein

Oracle EBS R12 - DR setup using Oracle Data Guard

Hi,
Our customer has implemented Oracle EBS R12 (12.0.6) on a Two Node RAC on HP-UX env. The application Tier also has Two Nodes(Admin Tier and Web Tier).
Oracle Clusterware - OCR and Vote Disk are on Raw Devices and the EBS database is on ASM.
Customer wants to implement a DR solution with Oracle Data Guard with only 2 servers - 1 for the Database Tier and 1 for the Application Tier on the DR Site.
I would like to know if this could be done by following note: 452056.1? I would also like to know if there are other useful docs.
Thanks.
Thiru

Hi,
Customer escalated this issue to Oracle and they came up with this reply:
They can implement Disaster recovery solution from RAC to NON RAC using Solution A which use RMAN utilities for backup and recovery.
While now AMP Application Management Pack gives the capablitiy to build non RAC from RAC Envioment, In future AMP will be capable also to support cloning of DB with Data Guard.
Details
Solution A - Using RMAN:
For Release 12 customers, you can clone from a RAC to RAC (like to like) or RAC to non-RAC. This is using RMAN scripts to take a copy of the db when it’s in archive mode. if you’re leveraging any disaster recovery tools like data guard, the above solution should work fine…perhaps some fine tuning to the procedures
Solution B - Using AMP in the future release
For Release 11i , Release 12.x customers, AMP would be offering a new cloning solution that wouldn’t have dependency on Rapid Clone. This solution leverages the strengths of EM Grid Control in provisioning or cloning targets such as databases. This would be an advance solution that would support:
o A full-fledged scale down cloning
o Cloning of EBS deployed on Shared File System
o Hot and Cold mode cloning
o Quantifiable reduction in clone time for the entire EBS system
This solution would be leveraging EM grid Control’s DB provisioning pack’s clone utilities, that are quite advanced and support cloning of DB with Data Guard.
The recommendation is to start trialing AMP version 3.0, making the purchase and implementing within the Enterprise. As we release the new version of AMP (release 3.0.1), Customer would be in a better position to quickly implement the latest features
Can anyone let me know if the solution A suggested will work.
Rgds,
Thiru

OBIEE 11.1.1.3.0 integrated with Oracle EBS R12

Hi,
I have Oracle EBS Vision Instance v R12.1 installed on Redhat 5 and wanted to install OBIEE latest version. Can some please point to system architecture diagram as i am conflicted with installation. I do not have complete idea but writing here what i actually know.
Oracle EBS R12 on Linux
OBIEE V 11.X on Linux
Now install prepackeged analystical function on windows machine and using BI tool deploy/use them with Oracle EBS.
Please point me to a note which describes the components and what does it take to make up and running in conjuction with Oracle.
Thanks in advance
Prashant

Please see these docs.
Integrating Oracle Business Intelligence Applications with Oracle E-Business Suite [ID 555254.1]
What documentation do I need to review when installing and configuring a OBI Apps 7.9.6.x environment with EBS? [ID 1221764.1]
Master Note for OBIEE Integration issues with EBS, Siebel, SSO, Portal Server [ID 1248939.1]
Oracle SSO E-Business Suite Applications Integration with Oracle Business Intelligence [ID 553423.1]
Oracle EBS integration with OBIEE [ID 733137.1]
Document for implementing security OBIEE Apps with EBS and Siebel CRM as sources [ID 756851.1]
What Application must be chosen for Responsibility within EBS when integrating with OBIEE [ID 1246464.1]
Also, search Steven Chan's Blog and you should get couple of hits -- http://blogs.oracle.com/stevenChan/
Thanks,
Hussein

Want to Integrate ESSO with Oracle EBS R12

Hi,
I am newbie to ESSO, want to enable single sign on facility with my Oracle EBS R12 using windows logon as primary authentication. Can anyone guide me how to proceed? can I use ESSO to solve this issue? if yes then please guide me with steps to proceed and achieve desired results.
Reply awaited..
Regards,
Priyanka.

Priyanka Pawar wrote:
Thanks for your valuable reply.... Gone through documentation and it is really very helpfull. I can now proceed with downloading ESSO and installation of ESSO-LM.
As it is 1st time i am tring to implement ESSO, is it possible to install it on my Windows XP PC for testing it's working, installation and configuration? Yes. You will need Active Directory or ADAM for storing metadata. ADAM can be installed on your PC too. There's a Deployment Guide in the docs that describes this.
>
What about Template creation? should i follow "Template Configuration and Diagnostics for Web Applications" for creating Template for accessing Oracle EBS R12 application?Yes

Unable to open XML report in Oracle EBS r12

Hi,
I have new installation of Oracle EBS r12 (12.1.1) on linux.
To test the XML report, I changed the output of standard report 'Active Users' from 'Text' to 'XML' and defined the data definition and template for this report.
I am unable to see the output for XML reports. The report completes without error, however I cannot open the output file.
The browser opens for fraction of a second and then closes down. My client machine is Windows 7 and I used Microsoft words 2010 to build template
I used the 5.7.201 version of BI publisher to create the rtf template.
Please help me to resolve this issue.
Thanks

I changed the output of standard report 'Active Users' from 'Text' to 'XML' and defined the data definition and template for this report.
looks like xml publisher report, so output for concurrent must be 'XML'
******* I have changed the output of concurrent program 'Active Users' from 'Text' to 'XML'
I am unable to see the output for XML reports.
how you see it?
******* I tried to open the report by clicking on 'Output' button from view request screen of EBS.
did you try after concurrent completed check 'diagnostic -> view xml'?
******* I haven't tried this. Will do now.
The report completes without error, however I cannot open the output file
what is error?
******* There is no error, the request completed successfully. When I tried to open the output file by clicking 'output' button, the browser doesn't open.
did you check OPP log?
******* There is nothing in the OPP log.
if concurrent failed so first of all check your code - data template and package (if used)
******* I used the standard EBS report 'Active Users' and just changed the output from 'Text' to 'XML' and attached the rtf template.

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
Rp

1. in physical connections part can i use the same work schema
2. Can i use same contexts created or do i need to create everything as new and then try?
Thanks,
Rp.
Hi,
As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

Capture XML data payload into database table (Oracle EBS R12)

Hi All,
We have a XML Publisher report which generates output in PDF format. We want to capture the XML data payload generated by this report and put it into a DB table once the PDF is generated.
This report is generated through Oracle EBS R12 and XML Payload is stored by oracle by default in $APPLCSF/out directory.
Any pointers would be helpful
br

Couple of options, this one is probably the easiest without knowing other requirements (e.g., do you have to store the output as XML, or do you just the data available so you can output in XML later?).
Capture the SQL statement that generates the output in the first place. If you have that statement, you can insert into some table using the select statement. Once you have the report data (and you can tag that particular set of data with a job ID, timestamp, whatever, in case you need to store it and distinguish it from other reports down the road), you can generate XML output using the PL/SQL built-in DBMS_XMLGEN.
Is that what you are looking for?

Oracle EBS R12 intalltion on Windows Web Server 2008 R2

hi ,
Am planning to install intially oracle EBS R12 in windows web server 2008 R2.
Is this OS supported by oracle? Did anybody already done this ?
also later am planning to install OBIA + OBIEE stack on this. will all these
supported on windows web server 2008 R2?
Please provide your suggestions.
which windows version is stable to have EBS R12 + OBIA + OBIEE.
thanks

Hi Srini;
Duplicate post - Oracle EBS R12 intalltion on Windows Web Server 2008 R2
Dont you have admin right? You could delete duplicate which pretend to open same question more than one place and also it could hold clear to open question interface on main related forum part
Regard
Helios

Oracle ILM assistant for Oracle EBS R12.1 application with 11.1.0.7 DB

Oracle ILM through its ILM Agent, which is a database component provides option for data archiving.
Need to know how ILM agent can be used against Oracle EBS R12 and the options available:
a. Does ILM assistant map to industry Compliance requirements and can we add or modify based on additional Client requirements
b. Is this configured for all components and are the business rules (default) taken care in terms of archiving related data, if not what are the options available
c. What are the options to archive data
i. On Same and archive database
ii. Other RDBMS (mysql, or open source database)
d. Access to archived data
i. Is archive data available from the existing application or only from backend database
ii. Does ILM assistant provide options to access archived data (same Oracle RDBMS or heterogeneous database)
e. Retention options
i. Does ILM assistant provide multi tier retention options for archived data for different range (# of years)
Edited by: user9031099 on May 9, 2013 11:00 PM
Any update on my query please...?

Limits the Preferred Read-Write Tablespace to only 1 where as in Oracle EBS we would require multiple tablespaces to be Preferred Read Write. Can we extend the functionality of ILM assistant to have multiple Read-Write tablespaces...?

Oracle EBS R12 installation problem in Windows 2003

Hi,
I am trying to install Oracle EBS R12 on Windows 2003 R2. I have installed cygwin along with required packages and also Visual studio 2005 as specified in the prerequisites of installation document.
All the validations are successful before installation but I am facing error during installation in Step3 at about 53 percent. When i checked the log file, I found that some of the files required for installation are not found in my staging area. Now I want to run MD5sum on the Staged Files.
I had downloaded md5sum_windows.txt and also run this command :
md5sum --check md5sum_Windows.txt > md5sum_result.txt
In md5sum_result.txt, I am getting error for all files. Error message is as :
oraAppDB\Disk1\data\driver\Disk1.drv
: FAILED open or read
This is repeating for all files. But i can see that the files are present in My Staging area. Do i need to set some permission for this. Please help. Desperately want to install EBS as part of perparation for my planned certification.
Edited by: 855292 on Nov 26, 2011 1:58 AM
A simple detailed Step by Step Installation Document or any good reference for the same would by really appreciated.
Edited by: 855292 on Nov 26, 2011 2:00 AM

I have downloaded all the 33 files in oracle edelivery site. I have seen a post of yours regarding Oracle R12 installation on Windows XP. It mentions only some 25 files. Please do not rely on the that thread as it was for 12.0.x installation.
For R12 (12.1.1) you need to download the following files:
From: Oracle E-Business Suite Release 12.1.1 Rapid Install Start Here (Part 1 of 4)
To: Oracle E-Business Suite Release 12.1.1 for Microsoft Windows (32-bit) Rapid Install APPL_TOP - Disk 2 (Part 2 of 2)
Is it possible that contents of the zip file are lost during download because my stage area is about 39 GB . and also I have verfied all the files in edelivery site is downloaded too.
Also the error i mentioned in my last post, I can see the file in the directory but still its showing read error. Is it due to corruption of data. That would mean that I will have to download all 40 GB again :-(It is easy to verify the contents of the stage area directory without running md5sum, so please do so and post the results here.
Thanks,
Hussein

How to upload data into form of Oracle EBS R12 using ATS ver 9.0

Hi experts,
Could you please guide me how to upload data into form on Oracle EBS R12 using Oracle Application Testing Suite verson 9.(The simpliest way)
For example: I need to create user account on Oracle EBS. Normally, I use Dataloader to upload the data, however it just can upload one by one record, cannot upload multi record at same time. Moreover if the performance of server is low, so I will get the issue when using dataloader.
Thanks in advance
Best Regards
Hieu

Hi you can create Virtual users to enter data. Note than you have to name the objects accordingly.
For Example default recording provided by Open script is ObjectNAME_(Index No of the object).
when you record one iteration the name of any object would be ObjectNAME_(0)
You can then create virtual users so the index will increment as the total number of Virtual users increases. Also you have to handle which row of your test data would get mapped to which Virtual user in the script run session.
Thanks

How to create a .exe script to start and stop Oracle EBS R12 in Linux

Hello,
I have installed Oracle EBS R12 in Linux enterprise through Virtual box on windows 7 professional. It takes a long time to start and stop EBS as I have to start and stop the scripts manually - can someone please help me with the following (I have tried searching the web and Oracle for help but have had no joy);
Q1. I want to create a executable file in Linux so I can double click the file in Linux to start EBS automatically instead of going through each script manually
Q2. I want to create a executable file in Linux so I can double click the file in Linux to stop EBS automatically instead of going through each script manually
you help will be appreciated.
Ali

I have installed Oracle EBS R12 in Linux enterprise through Virtual box on windows 7 professional. It takes a long time to start and stop EBS as I have to start and stop the scripts manually - can someone please help me with the following (I have tried searching the web and Oracle for help but have had no joy);
Q1. I want to create a executable file in Linux so I can double click the file in Linux to start EBS automatically instead of going through each script manually
Q2. I want to create a executable file in Linux so I can double click the file in Linux to stop EBS automatically instead of going through each script manually
you help will be appreciated.Please see these links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Autostart+AND+Services&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Auto+AND+Start+AND+Services&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Managing Server Processes
http://docs.oracle.com/cd/E18727_01/doc.121/e13675/T530130T530133.htm#5274555
Thanks,
Hussein

Oracle EBS R12 for Windows Installation Error

Hi,
I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
"runProcess_4"
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
"Statusstring Configuring Database Technology Stack"
C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
LOCAL : VIS
ORACLE_SID :
PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
addlnctl.cmd exiting with status 1
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 5 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
script returned:
Sat 06/13/2009
08:43 PM
"afmkinit_inst.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 6 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
script returned:
Sat 06/13/2009
08:43 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Thanks in advanced,
Edited by: amorsolo on Jun 15, 2009 9:12 PM

Hi user3726038,
I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

Possible to install Oracle EBS R12 on existing (shell) Oracle 11.1.0.7 DB?

Is it possible to install Oracle EBS R12 on existing (shell) Oracle 11.1.0.7 DB?

user4434301 wrote:
OK...I could be crazy, but I didn't see doing an installation of EBS R12 on a pre-existing 11.1.0.7 DB in there anywhere. It looked like the regular install directions. Are you sure?If you mean to say if you can install R12 with an existing EBS/standalone database then the answer is No.
If you mean to say if you can lay down R12 software (to upgrade from 11i) with an existing EBS database then the answer is Yes.
I hope it is clean now.
Thanks,
Hussein

Deploy Oracle EBS R12.1.3 on Internet

Similar Messages

Maybe you are looking for