Deploy projects over FTP and Secure FTP connections

This question was posted in response to the following article: http://help.adobe.com/en_US/ColdFusionBuilder/2.0/Using/WSf01dbd23413dda0e1736ebc1213a528a b0-7feb.html

This doc is invalid for ColdFusion Builder 2.

Similar Messages

10.4.11 and secure wireless connectivity

Have G3 and emac running 10.4.11. These are capable of "WPA personal". I realize that significant progress in wireless security has supposedly been made, but it seems that newer routers (FIOS in my case) will not allow these older macs to connect even though I am willing to keep the WPA instead of WPA2 (which my newer macs are capable of).
Is there a way to do this or should I give up?
Also, since I use the 10.4.11 macs less than the newer ones, I don't see a lock next to a WPA personal network in the airport menu of the 10.4.11 macs, even though shows up as a WPA personal network in the network pref pane. Is it safe to assume that the lock icon was not part of 10.4.11?
I have all the macs running now on an older FIOS router, but I need to upgrade the router. I have a newer (not the newest) FIOS router that I have been swapping in/out and just can't get the older macs to join on the newer router
Thanks

You could get another wifi router to ethernet. Attach via ethernet to your new fios router. Note to do printer sharing and/or file sharing. all devices need to be connected to the same router. Unless, you are a networking geek and buy more expensive hardware. You can get to the internet from any router.
Ethernet Bridge Solutions
Ethernet Bridge
"The versatile Wireless-G Ethernet Bridge can make any wired Ethernet-equipped device a part of your wireless network." from linksys. The supports both web browser based or program configuration. For the program, you need mac os x 10.5 or greater or windows xp to configure. Once configured, you can use it on any ethernet port.
http://www.amazon.com/Linksys-RE1000-Wireless-N-Range-Extender/dp/B005FDXMJS/ref =sr_1_1?ie=UTF8&qid=1314563758&sr=8-1
Airport Express
Airport Express is an external unit and you can configure it as a bridge. 802.11n ( You will need a more modern version of Mac OS X to configure. Sadly, Apple uses a configuration program to configure, not a web browser. ) Please note this requires mac os x 10.5??? or greater to configure or windows xp to configure. Please verify requirements before buying. Once configured, you can use it on any ethernet port.
https://www.apple.com/airportexpress/
Netgear WNCE2001
Linksys WET610N are only two bridge examples.
USB Adapters
BearExtender
http://store.bearextender.com/products/bearextender-mini
Newer Technology MAXPower 802.11n/g/b USB Adapter. New Technology has made these adapters for a while this one is for OS X 10.5 and greater.
http://eshop.macsales.com/item/Newer%20Technology/MXP3802NU2C/
Newer Technology MAXPower 802.11n/g/b USB Adapter. New Technology has made these adapters for a while. What Mac OS they supports changes over time. Be careful which one you get. Amazon claims to be selling older ones as of 2/16/2013. http://www.amazon.com/NewerTech-MAXPower-802-11n-Wireless-Extension/dp/B00132CMN C
Tenda W311M
http://www.microcenter.com/product/373032/W311M_150Mbps_Wireless_N_USB_20_Adapte r
Most of the real work is done in software. Took 15% to 25% of the processor in my iMac G3 600 :(
Edimax EW-7722UTn -- 300Mbps Wireless 802.11b/g/n Mini-size USB Adapter
http://eshop.macsales.com/item/Edimax/EW7722UTN/Specs
10.4 / 10.5 / 10.6 / 10.7 / 10.8
The letters n/g/b correspond to the speed of the data transfer. You should match the speed to your existing router. You best match on the highest speed. N is the highest. G is middle. b is lowest.

Urgently!! Deploy project using Struts and Toplink

Hello. I want to make a deploy of a project in wich I'm using Struts and Toplink technologies.
I'm using JDeveloper 10g for Windows and my production server is a SUN V880 with Soloaris 8 and I make it ok, but when I run it since a PC in the intranet the following errors appears (obviously those don't appear before):
java.lang.NullPointerException at org.apache.struts.taglib.html.JavascriptValidatorTag.doStartTag(JavascriptValidatorTag.java:309) at jsp.login._jspService(_login.java:50) [SRC:/jsp/login.jsp:5] at com.orionserver[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:567) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:536)
Thank you so much for help.

NOO!! :( I don't install any libraries in the server, but in the WAR file of the application, in the lib folder, there was the jars corresponding. I thought that those libraries, in the WAR file, was "local" to the project, anyway, the Struts and Toplink libraries must be global at server level, 'cause I will use it sure once agian, and now I'm trying to install those in the server...
Thank you so much!!

DI-Server and Secured DB Connections

Hello,
When I use DI-API or DI-Server, it creates a connection to the database.
Can that connection be secured using KPI or Kerberos?

The connection to the DB is between DI Server and the DB, and then usually it
is local - in the same machine. The client got a session Id and uses this one
in the subsequent operations ...

Mail Application and Secure SSL Connection

I am having a problem sending mail using Secure SMTP. Does anyone know if Mail can support using SSL over an alternate port rather than TLS? Downloading messages is fine over secure imap. Many thanks in advance. Ian
iMac G5 1.6Ghz Mac OS X (10.4.8)

Mail doesn’t support SSL on non-standard ports. Check the following thread for more information on this:
Mail doesn't use SSL on non standard ports?

Found TTN2.tiff during my project to optimise and secure a digital archive

The reason my question is here is that this is the forum where I expect all the digital archivists to show up on a regular basis.
What can I think of this (scan) format - how secure/ standard is it? Will it still be readable in 10 years time? Can anybody help me with product specifications?

This forum is only to discuss how the forums operate, not products
If you go to the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the Adobe product(s) you use

Project Pro 2013 client Deployment with Lync 2010 and Team Explorer Excel Issues Following

Current machines are Office 2010 SP1 or SP2 32-bit
Just deployed Project 2013 Pro and Std to the existing machines that had Project 2010 Pro or Std. We selected the full install since people use integration into different tools.
Results:
lync 2010 64-bit when attending a meeting prompted user to start using and download the Lync Web Component, which breaks features such as muting, etc.
A repair sent to the workstations for Lync 2010 64-bit fixed that.
Team Explorer 2012 Export to excel from queries gives error Unable to cast COM object of type 'Microsoft.Office.Interop.Excel.ApplicationClass' to interface type 'Microsoft.Office.Interop.Excel._Application'. This operation failed because
the QueryInterface call on the COM component for the interface with IID '{000208D5-0000-0000-C000-000000000046}' failed due to the following error: The interface is unknown. (Exception from HRESULT: 0x800706B5).
Repair of Team Explorer, Office, Test Manager 2012, etc did not assist. if we go into excel and connect to TFS, we can then retrieve the query data. Just not from TFS exporting to excel. Had to unload Project 2013, repair Office 2010
and rebooted with project off the machine and now it works. It seems maybe the setup with the shared features and Office tools are breaking something? We need the ability for VBA and .net functionality, but what could be breaking this?

Hi,
Your environment will support 32 bit of Project professional 2013 (x86) as you have Windows and Office of (X86).
You try to modify registry then you wont face issue.
The issue when you hit a "1653" is that Windows
Installer "DisableRollback" is set. Office 2013 requires that "rollback" be enabled. If you are getting a "1653"
error in your logs as Ken did then the solution is to delete the "DisableRollback" (or set to '0') at the following registry keys:
HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\Installer
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
these are the issues I've seen:
Scheduler service was stopped. At a cmd window typing "net start schedule" resolves the problem.
CMD.exe was customized via the following registry key. Solution was to temporarily disable the customization by changing autorun value to autorun_old.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Command Processor
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Command Processor
Permission issues - seems some custom permissions affected Ingram's install which he explained in his previous post.
Environment variable "ComSpec" had been modified (semicolon added). Fix was to remove the added semicolon (there should be no semicolon).
The way to identify you are hitting this specific issue is if in the %temp%\OfficeSetup.log there is a mention of "Office64MUI.msi" failing to install with return value of 1603
If you want to enable verbose logging via the following key, rerun your failed install, and collect all the setup and MSI* logs that will give more information.
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Installer]
"logging"= "voicewarmup"
kirtesh

Trying to add 2nd computer to my secured wireless connection

help.......i hooked up my laptop to a wireless router and secured the connection...that works fine....it set up automactic id passwords so i can connect just fine................now i have a second laptop that i an doing some work on and i need to connect to the internet via teh wireless secured router........can do..it asks for id/password which i dont have since it assigned it automatically...now what..any guidance would help.,,,,,,,frank

just to add... delete old profiles under preffered networks so that you'll not have any problems connecting to your network,....
chickmagnet

How can I find out the server port for a secured FTP site and creating a FTP Connection Manager

I have to create a FTP Task to go out and get the files that our 3rd party vendor will be dropping on a secured FTP site. I have all the credentials to access that Secured FTP Site and have successfully done so through FileZilla.
Now I need to set-up a FTP Task to go out and get their files and in so doing create a FTP Connection Manager. Is there any way I can determine the
Server Port number from the Secured FTP site? I let it default to 21 and tried the Test Connect and it failed.
Thanks for your review and am hopeful for a reply.

Hi ITBobbyP,
SSIS has a built in FTP task, while this only works for the FTP protocol, it doesn’t support SFTP. But there are some free clients like WinSCP and
SSIS SFTP Task Control Flow Component
available in the CodePlex which can invoked from SSIS.
References:
SSIS SFTP Task Control Flow Component approach
WinSCP approach
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Access to external drives and removable over FTP

does anyone know how I can make
access to /volumes/* available over FTP?
I need one of them (/volumes/Maxtor USB HDD/) on windows often, but also on my mac
it's not that useful if I have to unmount if from my mac and the use in on windows, and then connect it to my mac again

Just wondering why FTP is needed, wouldn't SMB work just as well?
Sharepoints for smb...
http://lowendmac.com/mac2win/04/0623.html
Sharepoints...
http://www.hornware.com/sharepoints/

Broken Ftp Connection and big files problem

I have a problem with big-files downloading.
Does anybody know how to resume downloading using FTP-connection?
Or how can I get bytes from FTP connected file using something like random access to avoid the restart of downloading the file?
"InputStream" does not support "seek"-like methods.

From RFC 959
RESTART (REST)
The argument field represents the server marker at which
file transfer is to be restarted. This command does not
cause file transfer but skips over the file to the specified
data checkpoint. This command shall be immediately followed
by the appropriate FTP service command which shall cause
file transfer to resume.
You should also be aware of RFC 959 Section 3.4.2 on BLOCK MODE transfers which is what allows FTP to REST a connection and "skip" n-bytes of a file.

Windows 2008 R2 cluster and FTP-connection

Hi,
We have windows 2008 r2 server cluster. There is a resource which is connected by the third part
via ftp. When they establish the connection, there is configured ip-address to certain node.
When we manage cluster, it might happen that the resource is left on the other node and when they
establish next time the ftp-connection, it says that can't connect. I've made similiar usernames with
similiar passwords on both nodes.
Is there a possibility to configure the environment so, thta ftp-connection is not depend on which
node the resource is?
Br, Petteri

Hi Peter Castle,
When you want to keep the session on one server you must use the Single Affinity option.
The related KB:
Specifying the Affinity and Load-Balancing Behavior of the Custom Port Rule
http://technet.microsoft.com/en-us/library/cc759039(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can't establish ftp connection between a Xserve and a PB

We want to use a Xserve (Mac OS X Server 10.4.8) to provide webhosting, but experience problems in establishing ftp connections using a PowerBook (Mac OS X 10.4.8).
On a WinXP-based notebook using the same Internet connection, anything works fine, just not on my PowerBook.
This is what happens when trying to establish a ftp connection (via terminal):
I type: ftp [email protected]
Returns:
220 star1.local FTP server ready.
331 Password required for user.
I provide the password, anything looks fine, get this output:
230 User starenterprise logged in.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp>
Okay, now I want to see what files are in the directory using "dir" command ("ls" brings same result). This output is shown:
502 'EPSV': command not understood.
227 Entering Passive Mode (132,78,123,92,42,115)
Now I can either press CTRL+C to escape or when waiting around one minute, then it states this:
421 Service not available, remote server timed out. Connection closed
On a ftp client software like CuteFTP Mac it shows "Can't open data connection" instead of, but result is the same.
I read through some articles I found here, but nothing compared to my problem. Please help.
I should mention one thing Apple's support told me: Since I have the same username and UID on my PowerBook as well as on the xServe, it could bring problems. However I have then added a new user to my PowerBook, result is the same. And Apple's support left helpless so far.

You said: "Not really answered, the problem persists and I now go on and let
Apple work on it again"
As a native English speaker, I must say (and doubt any would disagree) that
your statement implied: "No one here has actually helped me fix this problem,
and now I'm waiting for Apple to fix it"
Please take care to the word "again" I used; this implies that Apple has tried to solve the issue before but failed (in fact, they stated to call me back, but this is weeks ago) and so I posted this here at the discussions.
Unfortunately I only have access to the "free" support (well, free is not the right word when paying 12 cents per minute for the phone call).
And this means (at least I can speak for the German part of Apple) that operators on the phone look at their knowledgebase and sending articles by e-mail; questions going deeper are resulting in a "we call you back" answer. Sometimes they phone back, sometimes not. Sometimes they are helpful, sometimes (or should I say "in most cases") they just give hints or ask me to investing a nice amount into premium support.
Don't misunderstand me in the direction that I demand assistance from this forum - I'm more than gradeful if I get help (and rewarded this always with giving points), it has saved me several times (many, many, many times) for doing time consuming investigations and making trial-and-error experiences by myself. If I cannot get more assistance, well I have to look elsewhere and so be a bit impertinent to Apple's support. Perhaps it helps
You are right, FTP itself works correctly. It even works fine on the WinXP notebook residing at the same LAN as my PB. Therefore the issue is at the PB's firewall very likely (or a strange relationship between two firewalls which seems not to affect WinXP).
But as you indicate, it makes no sense to lower down security just for doing ftp, especially since SSH works well. However since I have no problems doing ftp sessions with other servers, I would be eager to find the reason why it refuses in this case, even this just means feeding my curiosity
So if I come to new insights, I post them here. But I feel that I'll really need your wishes for luck to solve this problem Let's see...

Can anyone help me answer whether Robohelp has a secure ftp (sftp) or secure http connection protocols? it only lists ftp or http, but not specifying if secure? Thanks.

Can anyone help me answer whether Robohelp has a secure ftp (sftp) or secure http connection protocols? it only lists ftp or http, but not specifying if secure? Thanks.

Hello again
First off, sorry for confusing anyone with the WYSIWYG reference. Failed attempt at humor. Ah, live and learn.
Can you expound on what you mean when you say: But there does seem to be “disagreement” regarding whether RH supports HTTPS?
If you are only referring to this thread, are you sensing "disagreement" because Willam said you can serve content to users?
Here's the deal. I sort of "read between the lines" with your post and made an assumption and it seems I may have needed to ask you to clarify before tossing an answer out. The assumption I made was based on your statement of: it only lists ftp or http
That made me believe you were referring to the Publish section in the Single Source Layout properties. (shown below)
This dialog allows you to specify a protocol used to UPLOAD your generated content to a server.
What Willam was referring to was the END USERS viewing the content AFTER it has been uploaded.
Cheers... Rick

Secure FTP Connection

Dear Sir/Madam,
Do you know how to build and secure FTP connection using sun.net.ftp.FtpClient? Thanks in advanced for the help.
Regards,
Stanley

In one word: don't. sun.* packages are not only undocumented - they're subject to change or disappearance w/out notice. Depending on them is a bad idea.
I believe there are Java FTP classes available on the 'net somewhere - have you tried Googling for them?
Grant

Deploy projects over FTP and Secure FTP connections

Similar Messages

Maybe you are looking for