Deploy reports in ssrs which are renamed and avoid multiple copies

Hi, I have renamed few of my reports renamed and checked in. Usually we deploy it from BIDS off of TFS reports solution. We are using SQL Server 2008 R2 version. I tried deploying these reports to DEV & QA environments and report manager has 2 copies
of the same report one with the old name & the other with the rename. What would be the approriate way to delete these reports from Production without having to do it manually.
Thanks in advance...........
Ione

You have to delete them manually in this case.
There is no way around it.
Thanks! Josh

Similar Messages

TS3899 Cannot send email from iPhone. Outgoing settings are correct. Checked against iPad setting which are OK and can send mail OK.

Cannot send email from iPhone. Outgoing settings are correct. Checked them against iPad settings which are OK and can send mail. What can I do?

For IOS7.02
The user name and password are in two places. Make sure they are correct in both locations.
Settings>>Mail, Contacts, Calendars>>your email>>
First spot is here under INCOMING MAIL SERVER
Below this is OUTGOING MAIL SERVER
Select: SMTP smtp.comcast.net>> PRIMARY SERVER :smtp.comcast.net>>second location of user name and password
Here is the second place that the user name and password must be checked.
I had changed my password in the first spot, but not the second spot. I had been receiving the same error message. This fixed my problem.

My Mac suddenly stopped playing through my external speakers which are fine and working well with other devices.

My Mac suddenly stopped playing through my external speakers which are fine and working well with other devices.

Have a look in System Preferences -> Sound -> Output.
Plug the speakers out. Do you now see "Internal Speaker" as the name from the Built-in device? If you replug your speakers, is it now changing to "Headphone?

Which are methods and FM for Catsdb for BAPI

which are methods and FM for Catsdb for BAPI
Thank you,
points will be rewarded

Hi Jagrut,
BIW_CATS_CUSTOMER_EXIT
BIW_CHECK_CATS_DATA
BIW_CHECK_CATS_DATA2
BIW_DELTA_CHECK_SELOPT
BIW_DELTA_CHECK_SELOPT2
CATS_APPROVAL0
CATS_BIW_DELTA
CATS_BIW_TIMESTAMP_DELTA
CATS_BUILD_CATSD
CATS_CHECK_CONSISTENCY_AT_SAVE
CATS_DISPLAY_ALV_LIST
CATS_DISPLAY_TARGET_DOCUMENTS
CATS_DISPLAY_TARGET_DOCUMENTS0
CATS_READ_ARCHIVED_DATA
CATS_READ_INTERFACE_ACCOUNTING
CATS_READ_INTERFACE_LOGISTICS
CATS_READ_TIMESHEET_DATA
CATS_SAVE_INTERFACE
CATS_SHOW_LIST
CATS_TRANSFORM_FREE_RECORDS
EXIT_SAPLTSBW_001
READ_INTERFACE_CPR
Reward if useful!

Report for POs which are unpaid

Dear All,
I need report where all POs whether material or Service, which are unpaid. Reasons could be fund,Material not received or bill not booked. I tried ME80FN but I am unable to get the same.
Please let me know where I can get this and in which report.
Thanking you.
With Best Regards,
Rajesh

Hi Rajesh,
Use ME2M, ME2N, ME2L reports. In the selection parameters field in the input screen select the apropriate key
eg: RECHNUNG for Open Invoices, WE101 for open goods receipt etc.
Hope the above answers your query, else revert.
If helpful award points
Regards,
Vivek

How to Get List of Webi Reports in CMS which are scheduled?

Dear Experts,
I want to generate list of Web Intelligence Report which are scheduled.
In addition to above, if I get destinations and in case BO Inbox of mail recipients, list of recipients we be an added advantage for me.
is there any way, I can achieve this using SDK or sum of that matter?
Any Clue / Suggestions will be a great help for me.
Thanks you,
Regards,
Sachin Dalal

You can use the following query:
Select * from ci_infoobjects where si_name='<webi report name>' and si_instance=1
This will return all scheduled instances in their default location for specified webi report.
For each object you can retrieve:
((IProperties)((IProperties)oInfoObject.getSchedulingInfo().properties().getProperty("SI_DESTINATIONS").getValue()).getProperty("1").getValue()).getProperty("SI_PROGID).getValue().toString : returns managed for instances scheduled to enterprise user's inbox.
((IProperties)((IProperties)((IProperties)((IProperties)oInfoObject.getSchedulingInfo().properties().getProperty("SI_DESTINATIONS").getValue()).getProperty("1").getValue()).getProperty("SI_DESTSCHEDULEOPTIONS").getValue()).getProperty("SI_OUTPUT_FILES").getValue()).getProperty("1").getValue() -> returns the integer value of the SI_ID of the user where the report is scheduled in the user's inbox.
Query for the instance in the query builder and you can see the structure for SI_DESTINATIONS property bag.
Hope this help.
Aasavari

F110 for vendor invoices which are debits and for credits BVTYP are used

Dear all,
I have the following situation:
- 1 vendor with many documents to pay
- some documents have 1 line item that is a debit (positive value in FBL1N)
- this vendor has 2 bank accounts in master data and I would like to pay the second one, so the Partner Bank Type (BVTYP) field is filled with number 1 and 2
- before payment at FBL1N, I execute the mass modification of all documents putting the number 2 at the BVTYP field
- but when I execute the proposal at F110, only the documents with debit have error: No pymt possible because items with a debit bal, but the total is credit for vendor
I have seen that when I do not fill the BVTYP field in the documents, the F110 is executed normally, I mean, it considers debits and credits (we have previously created a new payment form for this kind of vendors, one that could consider debits and credits).
PS: at FBL1N, when I open the document with the debit item, it doesn't show the field BVTYP.
Is there any kind of configuration that I have to make to F110 start considering the filled BVTYP field?
Thanks in advance.
Kathia Tsuboi

Hi Abhi,
I have created some queries for the same. COuld you help me if I am going in the rite direction.
I have created a query to find the suppliers which are not being used in the POs for the past one year by using the below query: But for invoices and payments to be included, I am finding it a bit difficult....need help..............
--FINAL QUERY
SELECT vendor_id, vendor_name, creation_date, last_update_date
FROM po_vendors v
WHERE v.end_date_active IS NULL
AND v.enabled_flag = 'Y'
AND NOT EXISTS (
SELECT 1
FROM po_headers_all h
WHERE h.vendor_id = v.vendor_id
AND h.creation_date(+) BETWEEN (SYSDATE - 365) AND (SYSDATE))
ORDER BY vendor_id DESC
Is it possible to send me the program so that it would be helpful for me to use it.
email: [email protected]
Help Greatly appreciated.
Thanks
Aman

How to convert data from a report in PDF which are specified on multiple lines ?

It often occurs that in a report one detail entry is folded onto two subsequent lines.
e.g.
No.
Container          Lt Ht Tp F/E     Dam          Weight Temp     Bi Im First Seal     No. Cell     Booking ref.
In Arr    id     A         Tml         PoL PD   PoD             C T L R F B
1       XXXU123456-7 20 ST I F                        24.000                                  SLX11            1    25A     CVA12345
How does the conversion to Excel is going to handle this ?
I need the second line of data in my excel sheet.
YES               9/10   14:15        BEANR   REFCT

Hello Jay,
Don't use SSIS to convert. Use SSIS to FTP the files out.
How you convert to PDF: the format is owned by Adobe so there might be royalties involved, but there are paid and free (OSS) libraries to doing so. Just search online.
Arthur
MyBlog
Twitter

Suppliers which are active and not being involved for a long time

Hi All,
Is there any way we can find suppliers which are active but not being used for a long time (for a specific duration) . i.e being involved in no open POs or no invoices processed or no payments made.
Please advice.
Thanks

Hi Abhi,
I have created some queries for the same. COuld you help me if I am going in the rite direction.
I have created a query to find the suppliers which are not being used in the POs for the past one year by using the below query: But for invoices and payments to be included, I am finding it a bit difficult....need help..............
--FINAL QUERY
SELECT vendor_id, vendor_name, creation_date, last_update_date
FROM po_vendors v
WHERE v.end_date_active IS NULL
AND v.enabled_flag = 'Y'
AND NOT EXISTS (
SELECT 1
FROM po_headers_all h
WHERE h.vendor_id = v.vendor_id
AND h.creation_date(+) BETWEEN (SYSDATE - 365) AND (SYSDATE))
ORDER BY vendor_id DESC
Is it possible to send me the program so that it would be helpful for me to use it.
email: [email protected]
Help Greatly appreciated.
Thanks
Aman

When I use write, it pops up many old addresses, some of which are defunct, and I don't know how to erase them.

When one starts to write t a new letter, Thunderbird asks for the recipient. Typing in a name, e.g. "jones", automatically creates a list of all previously used "jones" in that version of Mozilla. However, some of those addresses are obsolete and no longer usable. How can one edit this list.

Thunderbird support is over here. <br />
[http://www.mozillamessaging.com/en-US/support/] <br />
or here: <br />
http://forums.mozillazine.org/viewforum.php?f=39

Add Folder to library taking a long time and creating multiple copies

I have been a longtime WMP user and am ready to convert to iTunes. I am trying to "add folder to library", which causes a request to convert the files I already have (approx 5,000 songs).
It has been running for more than two days, day and night, working on this. I am not kidding!
I discovered that it has been creating multiple copies of the songs. It looks like it has restarted a few times, perhaps each time it restarts a new copy is made and placed in the iTunes folder.
Should it take this long? What can I do to resolve the speed issue and to eliminate all the duplicate files?
Please help.
Thanks
-medicnick

Theoretically, "Add Folder to Library" goes thru the folder and all its subfolders, and adds each song that it finds that is not already in the library. Optionally, it will make a copy of each song and deposit it in the iTunes Music Folder according to Album and Artist.
Personally, I have never seen it behave any different. But it is often reported on this forum that on large adds (and at 5000 yours is large) it does not behave properly.
Since your iTunes library is new, and does not yet contain those precious play counts, why not just delete it and re-add the songs in small batches. You may wish to deselect the "Copy Files to iTunes Folder When Adding to Library" option in Edit > Preferences > Advanced > General.

Merging and printing multiple copies in InDesign

I have created a nice 8 page A4 folder based on 4 double sided sheets of A3 that are folded and stapled nicely in our printer. Now I have managed to make a data merge from an Excel document with all my 500 customers so that I can personalize every bochure with name and address. The problem I have now is though that when I make the merge I end up with one large document of 8 x 500 pages (4000 pages long) and can't print them as separate documents with folding and stapling. Is tehre a way to tell InDesign that every 8th page the print should be treated as a separate document so that the printer knows when to fold and staple? If InDesign can't handle it, is tehre a way to make PDF and then tell in Acrobat how to treat the document this way?

Not sure I've understood, but the process is: (a) export to PDF your 4000 page InDesign document. (b) Open in Acrobat and run the split command. (c) You will now have a whole bunch of "split" pdfs in the same folder as the original large PDF.
You won't have some sort of a magical binder -- this will be a whole bunch of separate PDF documents.

Native format builder.To seperate body elements which are unbounded and also of different length ,which ends with special character LF if we open in Notepad++

Hi ,
My sample file is like this
RAJNagercoil19910809
JAMBangalore
ABCNagercoil20120304
ABBBangalore20120709
TOM
SAMBangalore20900909
here first 3 characters of each line represents Name,next 9 characters represents city,next 8 characters DOB.
Here everything is of fixedlength but all elements Name,city and DOB are optional they may or may not be in Sample file.
here if we open the above sample file in notepad++ the end of line is represented by LF.
My task is to separate the body elements given above into the following format
<Body>
<Name>Raj</Name>
<City>Nagercoil</City>
<DOB>19910809</DOB>
</Body>
<Body>
<Name>JIN</Name>
<City>Bangalore</City>
<DOB/>
</Body>
<Body>
<Name>ABC</Name>
<City>Nagercoil</City>
<DOB>20120304</DOB>
</Body>
<Body>
<Name>ABB</Name>
<City>Bangalore</City>
<DOB>20120709</DOB>
</Body>
<Body>
<Name>TOM</Name>
<City/>
<DOB/>
</Body>
<Body>
<Name>SAM</Name>
<City>Bangalore</City>
<DOB>20900909</DOB>
</Body>
The schema i designed for my task is like below
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
            xmlns:tns="http://TargetNamespace.com/test"
            targetNamespace="http://TargetNamespace.com/test"
            elementFormDefault="qualified"
            attributeFormDefault="unqualified"
            nxsd:version="NXSD"
            nxsd:stream="chars"
            nxsd:encoding="US-ASCII">
<xsd:element name="Root-Element">
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="Body" type="tns:sample" maxOccurs="unbounded" />
      </xsd:sequence>
    </xsd:complexType>
</xsd:element>
<xsd:complexType name="sample">
    <xsd:sequence>
      <xsd:element name="Name" type="xsd:string" nxsd:style="fixedLength" nxsd:length="3" nxsd:padStyle="tail" nxsd:paddedBy=" " minOccurs="0" />
      <xsd:element name="City" type="xsd:string" nxsd:style="fixedLength" nxsd:length="9" nxsd:padStyle="tail" nxsd:paddedBy=" " minOccurs="0"/>
      <xsd:element name="DOB" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" minOccurs="0" />
    </xsd:sequence>
</xsd:complexType>
</xsd:schema>
But it is not producing the result which i want .It is converting as follow.
<?xml version = '1.0' encoding = 'UTF-8'?>
<Root-Element xmlns="http://TargetNamespace.com/test">
   <Body>
      <Name>Raj</Name>
      <City>Nagercoil</City>
      <DOB>19910809</DOB>
   </Body>
   <Body>
      <Name>JIN</Name>
      <City>Bangalore</City>
      <DOB/>
   </Body>
   <Body>
      <Name>ABC</Name>
      <City>Nagercoil</City>
      <DOB>20120304</DOB>
   </Body>
   <Body>
      <Name>ABB</Name>
      <City>Bangalore</City>
      <DOB>20120709</DOB>
   </Body>
   <Body>
      <Name>TOM</Name>
      <City>
SAMBanga</City>
      <DOB>lore20900909</DOB>
   </Body>
</Root-Element>
The body element in red color indicates the issue.I my case i am not supposed to use MFL. Please Help me to Solve this issue and give me correct XSD which satisfies the above Sample.Its Very Urgent
Thanks in Advance...

Alright.. I did some extensive home-work for you and this is what I have got.. You can improvise it further accordingly, but this solution will get you moving.
Native XSD :
=================================================================
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
            xmlns:tns="http://TargetNamespace.com/test"
            targetNamespace="http://TargetNamespace.com/test"
            elementFormDefault="qualified" attributeFormDefault="unqualified"
            nxsd:version="NXSD" nxsd:stream="chars" nxsd:encoding="US-ASCII">
<xsd:element name="root">
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="multiple" minOccurs="0" maxOccurs="unbounded">
          <xsd:complexType>
            <xsd:choice>
              <xsd:element name="Body" type="tns:sample" nxsd:lookAhead="20"
                           nxsd:lookFor="${eol}"/>
              <xsd:element name="Body1" type="tns:sample1" nxsd:lookAhead="12"
                           nxsd:lookFor="${eol}"/>
              <xsd:element name="Body2" type="tns:sample2" nxsd:lookAhead="3"
                           nxsd:lookFor="${eol}"/>
            </xsd:choice>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
</xsd:element>
<xsd:complexType name="sample">
    <xsd:sequence>
      <xsd:element name="Name" type="xsd:string" nxsd:style="fixedLength"
                   nxsd:length="3" minOccurs="0"/>
      <xsd:element name="City" type="xsd:string" nxsd:style="fixedLength"
                   nxsd:length="9" minOccurs="0"/>
      <xsd:element name="DOB" type="xsd:string" nxsd:style="terminated"
                   nxsd:terminatedBy="${eol}" minOccurs="0"/>
    </xsd:sequence>
</xsd:complexType>
<xsd:complexType name="sample2">
    <xsd:sequence>
      <xsd:element name="Name" type="xsd:string" nxsd:style="terminated"
                   nxsd:terminatedBy="${eol}" minOccurs="0"/>
    </xsd:sequence>
</xsd:complexType>
<xsd:complexType name="sample1">
    <xsd:sequence>
      <xsd:element name="Name" type="xsd:string" nxsd:style="fixedLength"
                   nxsd:length="3" minOccurs="0"/>
      <xsd:element name="City" type="xsd:string" nxsd:style="terminated"
                   nxsd:terminatedBy="${eol}" minOccurs="0"/>
    </xsd:sequence>
</xsd:complexType>
</xsd:schema>
=================================================================
When used upon your input file, it produces a output file like the following :
<root xmlns="http://TargetNamespace.com/test">
   <multiple>
      <Body>
         <Name>RAJ</Name>
         <City>Nagercoil</City>
         <DOB>19910809</DOB>
      </Body>
      <Body1>
         <Name>JAM</Name>
         <City>Bangalore</City>
      </Body1>
   </multiple>
   <multiple>
      <Body>
         <Name>ABC</Name>
         <City>Nagercoil</City>
         <DOB>20120304</DOB>
      </Body>
   </multiple>
   <multiple>
      <Body>
         <Name>ABB</Name>
         <City>Bangalore</City>
         <DOB>20120709</DOB>
      </Body>
      <Body2>
         <Name>TOM</Name>
      </Body2>
   </multiple>
   <multiple>
      <Body>
         <Name>SAM</Name>
         <City>Bangalore</City>
         <DOB>20900909</DOB>
      </Body>
   </multiple>
</root>
As I said, you can try out some experiments around this xsd and get the output in the format, you want.
Hope this helps !
Best,
Puneet.

How to show and hide plots which are stacked and plotted on the one graph?

I am currently designing a Logic Analyser with 8 channels. These are plotted on a graph, stacked on top of each other. The user is able to select which plots he/she wishes to examine (i.e 1,4,6). I need to figure out how to hide the plots not required and show the plots needed.

Hi,
Did u say stacked?? then you must be using a chart not a graph
Nevertheless, as Unclebump has suggested, here is a Vi to give you an idea on how to use active plot and visible property nodes
Build on it to hide/show plots
Regards
Dev
Message Edited by devchander on 01-24-2006 06:09 AM
Attachments:
plot.vi ‏176 KB

I'm trying to type wedding invitation envelopes which are 5x7 and I don't know how to create the format. In the pages area, the available templates are all standard envelope sizes. How do I create the 5x7 format template

I'm trying to print 5X& envelopes. In pages, the templates are all standard sized. How do I create a 5x7 envelope template so I can merge my addresses?

I presume you are using the Pages application, is that correct?
So start off by launching Pages and choose one of the regular envelope styles. Traditional works well for me.
Next go to the File menu and select Page setup. From the menu that says Paper Size select Manage Custom Sizes. In the resulting dialog, there should be a button on the left labeled "+". Click it. In the Paper Size area, select Width 5 in and Height 7 in. Name the size (where it says "untitled" something descriptive like "5 x 7 envelope". Click the OK button. The Paper Size menu here should now say the description you gave it. Click OK again. Your work area should now be a 5 x 7 envelope.
Best of luck.
PS If you are using Word or some other program, the process is probably the same or very similar.

Deploy reports in ssrs which are renamed and avoid multiple copies

Similar Messages

Maybe you are looking for