Deploy Software on Server 2008 Enterprise R2

Hello Everyone
I'm installing Adobe Reader throught GPO ( Deploy Software) on User Configuration
Adobe Reader have 80MB, It will install when User logon. BUT very very slow.
I have to wait over 1 hour. I very tired
So, please help me. How to improve it ?

Hi trandao112,
Please refer the following KB to enable the install logging then post the error part, the current information is difficult to determine where may the issue occur, if you are
installing the adobe reader installer, it general possible is the network download too slow, you can refer the following Adobe forum thread:
Reader 11 very very slow
https://forums.adobe.com/thread/1097806
At system side, you can try to install the packet manually then compare the different log between GPO installation.
How to Enable Microsoft Installer logging and Verbose logging to gather additional troubleshooting Information
http://support.microsoft.com/kb/2545723/en-us
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Install Active Directory Domain Controller on Windows server 2008 enterprise, dont login on Sql Server 2008 R2

I install Active Directory Domain Controller on Windows server 2008 enterprise and dont login on Sql Server 2008 R2. Before install ADDC, I have logon SQL Server 2008r2 Success, After when i install ADDC is don't logon on SQL Server 2008r2 -->not success.
I have uninstalled ADDC but i still can't login on SQL server 2008r2.
please help me. it is very very disaster!
I think is loss account SQL server 2008r2!

Hello,
I stronly recommend you post the detail error message to us while you try to connect to SQL Server instance, it's useful for us to do further investigation.
Microsoft recommends that you do not install SQL Server 2008 R2 on a domain controller, there are some limitations:
You cannot run SQL Server services on a domain controller under a local service account or a network service account.
After SQL Server is installed on a computer, you cannot change the computer from a domain member to a domain controller. You must uninstall SQL Server before you change the host computer to a domain controller.
After SQL Server is installed on a computer, you cannot change the computer from a domain controller to a domain member. You must uninstall SQL Server before you change the host computer to a domain member.
SQL Server failover cluster instances are not supported where cluster nodes are domain controllers.
SQL Server Setup cannot create security groups or provision SQL Server service accounts on a read-only domain controller. In this scenario, Setup will fail.
On Windows Server 2003, SQL Server services can run under a domain account or a local system account.
So, I would suggest you try to open up Windows Services list and changed the account for SQL Server service.
Regards,
Elvis Long
TechNet Community Support

Is it possible to install sql server 2008 standard edition in windows server 2008 enterprise edition?

hi,
Please help me..
is it possible to install sql server 2008 standard edition in windows server 2008 enterprise edition?
will any problem arise?

Hiya,
Yes it it possible. No there will not be any problems.
Short and simple :)

New bie: install java EE 5 tools bundle on windows server 2008 enterprise

I installed jdk 1.6u7 in windows server 2008 enterprise with path set to c:\jdk\bin forder and JAVA_HOME=c\jdk
I downloaded java ee 5 tools bundle (with netbeans and without JDK) and execute it but after extracting file, it warned:
Java SE development kit was not found on this computer, Netbeans can not run without SDK blah blah...
It's strange. In other my computer (winxp SP2) I installed it in same way without problem.
Any hint please?
Thanks in advanced.

Your other PC had the JDK (JSE) already installed.
You definitely need it. Yes, in my above thread I already said that I installed JDK 1.6u7 with path and JAVA_HOME variable configured properly.
What I'm missing here?
Please have me. I need your help
Thanks in advanced

CiscoWorks LMS 3.2 Won't Start on Windows Server 2008 Enterprise

All,
I installed CiscoWorks LMS 3.2 RME on Windows Server 2008 Enterprise and the daemon manager won't start. The server is a VMware ESX server 4.0.
I've uninstalled and reinstalled and still nothing.
I get message "The service is not responding to the control function"
Has anyone had this issue?
Stephanie

There could be several reasons this happens. Common one in Windows 2008 is the swap is not set properly as it defaults to "Automatically manage paging file size for all drives". Try setting the swap to 8GB manually or whichever is the recommendation for your current device count as per:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html
Also make sure the startup services are set this way:
CiscoWorks ANI database engine: Manual
CiscoWorks Daemon Manager: Automatic
CiscoWorks RME NG database engine: Manual
CiscoWorks Tomcat Servlet Engine: Manual
CiscoWorks Web Server: Manual
CWCS Cmf database engine: Manual
CWCS rsh/rcp service: Automatic
CWCS syslog service: Automatic
CWCS tftp service: Automatic
DFM dfmEpm database engine: Manual
DFM dfmFh database engine: Manual
DFM dfmInv database engine: Manual
Set DEP for "Windows Essential Programs Only" and set an exclusion for CSCOpx in your anti-virus on-access scanning settings. Note that Windows 2008 R2 versions are not supported.

Management Pack for Windows Server 2008 Enterprise SP1

Hello,
I tried to manage the performance of a Windows Server 2008 Enterprise SP1 (6.0.6001) but SCOM 2007 R2 just check the availability with a ping status.
I have installed the normal management packs:
On the same SCOM, I have servers with Windows Server 2008 R2 and they work perfect.
What can I do?

Hi Journey Tinoco,
Performance can be monitored by using the active alerts TAB where a alert / alerts will be triggered based on the default management pack which you have installed / imported or if you have created a custom monitor based on your preference on what performance
counter you want to monitor on windows server 2008 servers VIA SCOM.
Or you can pull server performance report specific for Windows server 2008 from the reporting TAB as per the below screen shot for details.
The one which you are opened is the health explorer view which is not showing much details.
Go to reporting TAB ===> Select Windows server 2008 operating system monitoring and then What ever appropriate report you need to pull based on your requirement. For example i have pulled a report below for "Operating system performance.
Over here Click object and select the computer name and the icon should be a Windows serve / Computer as per the icon in my screen shot below. Select the time and date from and to the report you want and dont touch the add object option. Once done click
the Run button on the left to you will get the report as below.
Please note: If the below report is what you are looking for is not available in your SCOM's reporting TAB. Then you have not installed the reporting Management pack for Windows server 2008 monitoring. Download
it from the below link.
http://www.microsoft.com/en-in/download/details.aspx?id=9296
Hope this helps you.
Gautam.75801

Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit SSO

Hi,
     I try to setup SSO on Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit, but I can't start Active Directory SSO Service that show error follow below. I saw this error " KDC has no support for encryption type (14)" . Could anyone help me to troubleshoot this problem?
FQDN: active.test.com
Domain Name : test.com
User : ccasso
2011-02-05 12:00:30.225 +0700 WARN com.perfigo.wlan.jmx.adsso.GSSServer
- Server was not running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server starting server ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server is now running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - SPN : [ccasso/[email protected]]
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - done building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - KDC(s) :[10.0.240.100]
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: writing to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - creating login context ...
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - created login context ...javax.security.auth.login.LoginCon
text@5ad7b2
2011-02-05 12:00:40.239 +0700 ERROR com.perfigo.wlan.jmx.adsso.GSSServer
- Unable to start server ... KDC has no support for encryption type (14)
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Notifying GSSServer status Stopped
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- server is exiting .

Hi,
This error means that your DC does not support the encryption method the ACS wants to use.
Usually this happens when you run 2008 Server with 2003 functionality...
You will need to run ktpass.exe according to the DC you are running:
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1277452.
For Windows 2008 Server at 2003 Server functional level:
ktpass -princ newadsso/[adserver.][email protected] -mapuser newadsso -pass
PasswordText -out c:\newadsso.keytab -ptype KRB5_NT_PRINCIPAL
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Sharepoint 2007 and SQL 2008 SP3 on Windows Server 2008 Enterprise SP2 (64-bit)

Is there any documentation we can check if SQL 2008 SP3 is compatible with Sharepoint 2007 SP2 or SP3? Both Sharepoint and SQL servers are running on separate Virtual machines (Windows Server 2008 Enterprise SP2(64-bit)). Currently DB is running on
SQL server 2008 SP2, and we would like to have SP3 loaded on it, but want to find if there is any compatibility issue?
Thanks in advance!
mh

I'm not aware of any known issues with SQL Server 2008 SP3 and SharePoint 2007. I did a quick check and saw one person reporting an issue with their Central Admin site after applying the SQL Server update, but that's it.
With that being said, I would strongly encourage you to test out the application of that SQL Server service pack in a non-production environment well before you apply it in production. There is always a chance that your environment has something set up in
it that would cause an unexpected issue, and the best way to get an idea of whether or not an issue exists is by doing it somewhere else first before you do it in prod.
John
MCITP and MCTS: SharePoint, Virtualization, Project Server 2007
My books on Amazon: The SharePoint 2010 Disaster Recovery Guide and
The SharePoint 2007 Disaster Recovery Guide.
My blog: My Central Admin.

Upgrade Server 2008 Enterprise Domain Controller to Server 2012 Standard?

Hey there,
We are going to be attempting to upgrade several of our Windows Server 2008 Domain Controllers in our satellite offices from Windows Server 2008 Enterprise to Server 2012 Standard. I know the inplace upgrade will work (tried it on a member server)
but are there any caveats being that they are Domain Controllers? Contacted Microsoft and they said we shouldn't have any issues upgrading, and there is nothing special that has to be done in preparation. (I thought for sure we would have to DCPromo
down before and dcpromo up after the upgrade, but not so much, according to MS) But I figured I would check and see if anyone has done this successfully. I should mention that we already have 2, Windows Server 2012 Domain Controllers in our environment,
and one of them has the FSMO roles. Thanks in advance!

It should work with no problems. My favorite options remains always to demote the DC, re-install it completely and then promoting it again: This is just my own way to work as it makes me sure that I start with a clean base with the fresh install.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Server 2008 enterprise equalent in Server 2012

If I want to go for a Server 2012 License which has all features that was there in Server 2008 Enterprise, Should I go for(
(1). 2 nos license of standard 2012 Standard or( as Enterprise had 4 VM and Standard 2012 has only 2)
(2). 1 license server 2012 Data center

Well, in this case, I would recommend 2x Standard licenses because they cost $882 each, and comparing to Datacenter license ($4809), it is better to go for the Standard one.
Are you going to run those 4 VMs on one physical server? How many CPUs it has?
From the document:
"Determining the number of physical processor licenses:
Each license covers up to two physical processors, so to determine the number of licenses needed to fully license a physical server, simply count the number of physical processors in the server, divide that number
by two and that tells you the number of licenses that will be needed.
Here are some examples:
- You have a 2-processor server. 2 physical processors / 2 (number of processors covered by a license) equals 1. You will need one license to cover a 2-processor server.
- You have a 4-processor server. 4 physical processors / 2 (number of processors covered by a license) equals 2. You will need two licenses to cover a 4-processor server.
- You have an 8-processor server. 8 physical processors / 2 (number of processors covered by a license) equals 4. You will need four licenses to cover an 8-processor server.
Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

Download for SQL Server machine running Windows Server 2008 Enterprise SP2

I am confused what 11g product to download and how to configure for the above server. I just need for SQL Server 2008 to be able to communicate with some Oracle databases. I don't need to manage the Oracle database, nor do I need to create one. I just need to be able to create linked servers, use SQL Plus, and create some SSIS or DTS packages that will bring Oracle data into the SQL Server. I think I just need the client, but for 11g, I see it is less than 1GB in size. I am afraid I may be missing something because I thought the client downloads were about 2GB, but the 2GB downloads are not called "client". This is a 64bit machine running an Intel Xeon X7460 chip.
Our server has a C:\, D:\, and E:\ drive on it. The data (.mdf) is on drive E:\. The normal environment is on C:\ like usual. I also need to know if I need to set environment variables which I read about, but am not sure how to set them and make them stay, or if the software does that.
As an aside, I tried installing a 10g on there that the DBA downloaded and could never get it to work, although I was successful in getting tnsping to work, but SQLPlusW would close on me when I tried to connect and SQLPlus failed with some error but can't remember what right now. I uninstalled it. I think it may have been the wrong download.
I would appreciate any info at all, even if you don't know about everything said here.
I have a link here where I think I am close, but I still am not sure. Let me know if this is correct and which link to click. If I am wrong, please provide the correct link if you can. Thank you.
[http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html]
Edited by: user486992 on Oct 20, 2010 11:07 AM

Hi,
To integrate Oracle with SQL server you need the following
Install Oracle 11g Release 2 client software
Install Oracle 11g Release 2 ODAC software
Restart SQL services
Configure OraOLEDB.Oracle provider
Create linked server
Add remote logins for linked server
see this links
http://www.mssqltips.com/tip.asp?tip=1433
http://www.easysoft.com/applications/oracle/database-gateway-dg4odbc.html :)

What's happen if i deploy full SQL server 2008 R2 on lync server?

i ask my question in title

Hi klez0011,
Lync Server 2013 supports Microsoft SQL Server 2008 R2 Enterprise and Standard (64 -bit) database software. You could use it to create Back-End database of a Front-End pool, archiving database,
monitoring database, persistent chat database, and persistent chat compliance database.
Database software support in Lync Server 2013 for your reference.
Best regards,
Eric

Windows Server 2008 Enterprise SP2 64bit BugCheck 3B Probably caused by : win32k.sys process name: chrome.exe

indows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (12 procs) Free x64
Product: Server, suite: Enterprise TerminalServer SingleUserTS
Built by: 6002.18327.amd64fre.vistasp2_gdr.101014-0432
Machine Name:
Kernel base = 0xfffff800`01847000 PsLoadedModuleList = 0xfffff800`01a0bdd0
Debug session time: Mon Nov 3 05:27:34.976 2014 (UTC - 5:00)
System Uptime: 81 days 16:48:21.023
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff9600007f200, Address of the instruction which caused the bugcheck
Arg3: fffffa60155fff70, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
FAULTING_IP:
win32k!PFEOBJ::vFreepfdg+e8
fffff960`0007f200 0fba60300f bt dword ptr [rax+30h],0Fh
CONTEXT: fffffa60155fff70 -- (.cxr 0xfffffa60155fff70)
rax=000000000002f6bc rbx=0000000000000000 rcx=fffff900c1fad250
rdx=fffffa82bc20a330 rsi=fffff900c327a940 rdi=fffffa6015600820
rip=fffff9600007f200 rsp=fffffa60156007d0 rbp=0000000000000000
r8=0000000000000000 r9=000000000003fb36 r10=0000000000000000
r11=fffffa82aa1d6bb0 r12=0000000000000000 r13=0000000000000000
r14=000000000000491f r15=0000000000000001
iopl=0 nv up ei pl nz na pe cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010203
win32k!PFEOBJ::vFreepfdg+0xe8:
fffff960`0007f200 0fba60300f bt dword ptr [rax+30h],0Fh ds:002b:00000000`0002f6ec=????????
Resetting default scope
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT_SERVER
BUGCHECK_STR: 0x3B
PROCESS_NAME: chrome.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff96000244030 to fffff9600007f200
STACK_TEXT:
fffffa60`156007d0 fffff960`00244030 : 00000000`00000000 fffffa82`bc20a300 00000000`00000001 00000000`0000491f : win32k!PFEOBJ::vFreepfdg+0xe8
fffffa60`15600800 fffff960`0024e647 : 00000000`00000000 fffff900`c0092000 fffff900`c0010000 00000000`00000000 : win32k!RFONTOBJ::vDeleteRFONT+0x210
fffffa60`15600860 fffff960`0024e2ba : 00000000`00000000 fffff900`c1eb4010 fffff900`c1eb4010 fffff900`c2c773a0 : win32k!vRestartKillRFONTList+0xab
fffffa60`156008b0 fffff960`000f9bc2 : fffff900`c08ac998 fffff900`c2685350 00000000`00000000 fffff900`00000001 : win32k!PFTOBJ::bUnloadWorkhorse+0x196
fffffa60`15600930 fffff960`000fa7a1 : fffff900`c08ac910 00000000`00000000 00000000`00000001 00000000`00000001 : win32k!vCleanupPrivateFonts+0x72
fffffa60`15600970 fffff960`000eebc4 : 00000000`00000000 00000000`00000000 fffff900`c2621180 00000000`ffffffff : win32k!NtGdiCloseProcess+0x479
fffffa60`156009d0 fffff960`000ee42b : 00000000`00000000 fffff900`c2621180 00000000`00000000 00000000`00000000 : win32k!GdiProcessCallout+0x1f4
fffffa60`15600a50 fffff800`01afa77c : 00000000`00000000 00000000`00000000 00000000`00000000 fffffa82`aa1d6bb0 : win32k!W32pProcessCallout+0x6f
fffffa60`15600a80 fffff800`01afcc7d : 00000000`00000000 fffffa82`aa1d6b01 00000000`00000000 00000000`00000000 : nt!PspExitThread+0x41c
fffffa60`15600b70 fffff800`01aed942 : 00000000`00000000 00000000`0000000c 00000000`fffdd000 fffff880`0000000c : nt!PspTerminateThreadByPointer+0x4d
fffffa60`15600bc0 fffff800`018a0f33 : fffffa82`ab4eac10 fffffa82`aa1d6bb0 fffffa60`15600ca0 00000000`fffdd000 : nt!NtTerminateProcess+0xfa
fffffa60`15600c20 00000000`779d6e5a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ded8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x779d6e5a
FOLLOWUP_IP:
win32k!PFEOBJ::vFreepfdg+e8
fffff960`0007f200 0fba60300f bt dword ptr [rax+30h],0Fh
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: win32k!PFEOBJ::vFreepfdg+e8
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: win32k
IMAGE_NAME: win32k.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4de794fc
STACK_COMMAND: .cxr 0xfffffa60155fff70 ; kb
FAILURE_BUCKET_ID: X64_0x3B_win32k!PFEOBJ::vFreepfdg+e8
BUCKET_ID: X64_0x3B_win32k!PFEOBJ::vFreepfdg+e8
Followup: MachineOwner

Hi,
Would you please let me know whether had done any change before this issue occurred? For examples, install
any third-party application (chrome.exe) or any other? Meanwhile, would you please let me confirm whether this issue occurred regularly?
For Bug Check 0x3B, it indicates that an exception happened while executing a routine that transitions from
non-privileged code to privileged code. For more details, please refer to following article and check if can help you.
Bug Check 0x3B: SYSTEM_SERVICE_EXCEPTION
Please update drivers and install all necessary Windows Updates, then monitor the result. If this issue still
exists, please perform a
clean boot. Any difference?
By the way, it may be not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer
Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope this helps.
Best regards,
Justin Gu

Windows Server 2008 Enterprise SP2 64bit BugCheck 3B Probably caused by : win32k.sys ( win32k!PFFOBJ::pPvtDataMatch+12 )

Hi Guys,
Has anyone come across this BSOD error and found a fix, as I'm at a lost as to what is causing the BSOD
Please see Windows Debugger output below:-
Microsoft (R) Windows Debugger Version 6.2.9200.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Transfer\Minidumps\Mini051414-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (8 procs) Free x64
Product: Server, suite: Enterprise TerminalServer
Built by: 6002.23154.amd64fre.vistasp2_ldr.130707-1535
Machine Name:
Kernel base = 0xfffff800`01c18000 PsLoadedModuleList = 0xfffff800`01dd7e30
Debug session time: Wed May 14 12:01:16.178 2014 (UTC + 1:00)
System Uptime: 3 days 7:15:01.532
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff9600030271e, fffffa603d967ec0, 0}
Probably caused by : win32k.sys ( win32k!PFFOBJ::pPvtDataMatch+12 )
Followup: MachineOwner
7: kd> !analyze -v
*                        Bugcheck Analysis
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff9600030271e, Address of the instruction which caused the bugcheck
Arg3: fffffa603d967ec0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
win32k!PFFOBJ::pPvtDataMatch+12
fffff960`0030271e f6430804        test    byte ptr [rbx+8],4
CONTEXT: fffffa603d967ec0 -- (.cxr 0xfffffa603d967ec0)
rax=fffff900c277dd10 rbx=6364735523080013 rcx=fffffa603d968790
rdx=fffff900c2cc92a0 rsi=fffff900c2ade350 rdi=fffffa80369f6680
rip=fffff9600030271e rsp=fffffa603d968720 rbp=0000000000000000
r8=0000000000000000 r9=fffffa80369f6680 r10=fffffa803b6cdc48
r11=fffffa603d9687c8 r12=fffffa603d968810 r13=0000000000000000
r14=000000000000301f r15=0000000000000001
iopl=0         nv up ei pl nz na pe nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b             efl=00010202
win32k!PFFOBJ::pPvtDataMatch+0x12:
fffff960`0030271e f6430804        test    byte ptr [rbx+8],4 ds:002b:63647355`2308001b=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT_SERVER
BUGCHECK_STR: 0x3B
PROCESS_NAME: chrome.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff960003009b1 to fffff9600030271e
STACK_TEXT:
fffffa60`3d968720 fffff960`003009b1 : 00000000`0000301f 00000000`00004fbc 00000000`00000000 fffffa80`3b6cdbb0 : win32k!PFFOBJ::pPvtDataMatch+0x12
fffffa60`3d968750 fffff960`001aacb6 : fffff900`c2ade350 fffff900`c3fa59e0 00000000`00000000 fffffa80`369f6680 : win32k!PFTOBJ::bUnloadWorkhorse+0x55
fffffa60`3d9687d0 fffff960`001ab8d8 : fffff900`c2ade2d0 00000000`00000000 00000000`00000001 00000000`00000001 : win32k!vCleanupPrivateFonts+0x72
fffffa60`3d968810 fffff960`0019fbc0 : 00000000`00000000 fffff800`01ebfe00 fffff900`c277dd10 fffffa80`38d5b800 : win32k!NtGdiCloseProcess+0x4a8
fffffa60`3d968870 fffff960`0019f423 : 00000000`00000000 fffff900`c277dd10 00000000`00000000 fffff800`01ebfe48 : win32k!GdiProcessCallout+0x1f4
fffffa60`3d9688f0 fffff800`01ecc924 : 00000000`00000000 00000000`00000000 fffff800`01db6ec0 00000000`00000000 : win32k!W32pProcessCallout+0x6f
fffffa60`3d968920 fffff800`01ebfe65 : fffffa60`00000000 fffff800`01c89701 fffffa80`57c73810 00000000`78457350 : nt!PspExitThread+0x41c
fffffa60`3d968a10 fffff800`01c89881 : fffffa60`3d968ad8 00000000`00000000 fffffa80`382fe430 00000000`00000000 : nt!PsExitSpecialApc+0x1d
fffffa60`3d968a40 fffff800`01c8d935 : fffffa60`3d968ca0 fffffa60`3d968ae0 fffff800`01ebfe74 00000000`00000001 : nt!KiDeliverApc+0x441
fffffa60`3d968ae0 fffff800`01c6721d : fffffa80`3b6cdbb0 00000000`0038f2f4 fffffa60`3d968bf8 fffffa80`597301e0 : nt!KiInitiateUserApc+0x75
fffffa60`3d968c20 00000000`74c93d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceExit+0xa2
00000000`000eebd8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x74c93d09
FOLLOWUP_IP:
win32k!PFFOBJ::pPvtDataMatch+12
fffff960`0030271e f6430804        test    byte ptr [rbx+8],4
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: win32k!PFFOBJ::pPvtDataMatch+12
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: win32k
IMAGE_NAME: win32k.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 52f4cf4d
STACK_COMMAND: .cxr 0xfffffa603d967ec0 ; kb
FAILURE_BUCKET_ID: X64_0x3B_win32k!PFFOBJ::pPvtDataMatch+12
BUCKET_ID: X64_0x3B_win32k!PFFOBJ::pPvtDataMatch+12
Followup: MachineOwner
7: kd> lmvm win32k
start             end                 module name
fffff960`000e0000 fffff960`0039a000   win32k     (pdb symbols)          c:\symbols\win32k.pdb\E3E9D4C3813E470A90F52FAEC6461A252\win32k.pdb
    Loaded symbol image file: win32k.sys
    Mapped memory image file: c:\symbols\win32k.sys\52F4CF4D2ba000\win32k.sys
    Image path: win32k.sys
    Image name: win32k.sys
    Timestamp:        Fri Feb 07 12:19:25 2014 (52F4CF4D)
    CheckSum:         002AD344
    ImageSize:        002BA000
    File version:     6.0.6002.23325
    Product version: 6.0.6002.23325
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        3.7 Driver
    File date:        00000000.00000000
    Translations:     0409.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     win32k.sys
    OriginalFilename: win32k.sys
    ProductVersion:   6.0.6002.23325
    FileVersion:      6.0.6002.23325 (vistasp2_ldr.140207-0038)
    FileDescription: Multi-User Win32 Driver
    LegalCopyright:   © Microsoft Corporation. All rights reserved.
7: kd> .cxr 0xfffffa603d967ec0
rax=fffff900c277dd10 rbx=6364735523080013 rcx=fffffa603d968790
rdx=fffff900c2cc92a0 rsi=fffff900c2ade350 rdi=fffffa80369f6680
rip=fffff9600030271e rsp=fffffa603d968720 rbp=0000000000000000
r8=0000000000000000 r9=fffffa80369f6680 r10=fffffa803b6cdc48
r11=fffffa603d9687c8 r12=fffffa603d968810 r13=0000000000000000
r14=000000000000301f r15=0000000000000001
iopl=0         nv up ei pl nz na pe nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b             efl=00010202
win32k!PFFOBJ::pPvtDataMatch+0x12:
fffff960`0030271e f6430804        test    byte ptr [rbx+8],4 ds:002b:63647355`2308001b=??
Thanks
JT

Getting BSOD's pointing to this dll also. Started at around the same date as Jitinder's post. Maybe a new issue introduced has been introduced?
7: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff9600011fda0, Address of the instruction which caused the bugcheck
Arg3: fffffa6027acd1d0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
"kernel32.dll" was not found in the image list.
Debugger will attempt to load "kernel32.dll" at given base 00000000`00000000.
Please provide the full image name, including the extension (i.e. kernel32.dll)
for more reliable results.Base address and size overrides can be given as
.reload <image.ext>=<base>,<size>.
Unable to add module at 00000000`00000000
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
win32k!PFEOBJ::vFreepfdg+e8
fffff960`0011fda0 0fba60300f bt dword ptr [rax+30h],0Fh
CONTEXT: fffffa6027acd1d0 -- (.cxr 0xfffffa6027acd1d0)
rax=00000000014c0000 rbx=0000000000000000 rcx=fffff900c009c2a0
rdx=fffffa802735ab80 rsi=fffff900c0b9b010 rdi=fffffa6027acda80
rip=fffff9600011fda0 rsp=fffffa6027acda30 rbp=0000000000000000
r8=0000000000000000 r9=0000000000000000 r10=fffffa802800a288
r11=fffffa802800a060 r12=0000000000000000 r13=0000000000000000
r14=000000001539ed50 r15=0000000000000001
iopl=0 nv up ei pl nz na po cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010207
win32k!PFEOBJ::vFreepfdg+0xe8:
fffff960`0011fda0 0fba60300f bt dword ptr [rax+30h],0Fh ds:002b:00000000`014c0030=????????
Resetting default scope
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: iexplore.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff960002e66d4 to fffff9600011fda0
STACK_TEXT:
fffffa60`27acda30 fffff960`002e66d4 : 00000000`00000000 fffffa80`2735ab50 00000000`00000001 00000000`746e6647 : win32k!PFEOBJ::vFreepfdg+0xe8
fffffa60`27acda60 fffff960`002f0cb7 : 00000000`00000000 fffff900`c008f000 fffff900`c0010000 00000000`00000000 : win32k!RFONTOBJ::vDeleteRFONT+0x210
fffffa60`27acdac0 fffff960`002f0926 : 00000000`00000000 fffff900`c2bfcca0 fffff900`c0ae4010 00000000`00000000 : win32k!vRestartKillRFONTList+0xab
fffffa60`27acdb10 fffff960`00275c79 : 00000000`00000000 00000000`00000001 fffffa80`235762b0 fffff900`00000002 : win32k!PFTOBJ::bUnloadWorkhorse+0x196
fffffa60`27acdb90 fffff960`002978e2 : fffffa80`2800a060 fffff900`c0b932a0 fffffa60`27acdca0 00000000`7457c444 : win32k!GreRemoveFontMemResourceEx+0xad
fffffa60`27acdbf0 fffff800`01a64173 : fffffa80`2800a060 fffffa60`27acdca0 00000000`7ee9f000 fffffa80`25803040 : win32k!NtGdiRemoveFontMemResourceEx+0x12
fffffa60`27acdc20 00000000`74513d09 : 00000000`74513cc5 00000023`77300682 00000000`00000023 00000000`00000202 : nt!KiSystemServiceCopyEnd+0x13
00000000`1539ed48 00000000`74513cc5 : 00000023`77300682 00000000`00000023 00000000`00000202 00000000`1767d5e0 : wow64cpu!CpupSyscallStub+0x9
00000000`1539ed50 00000000`7457ab36 : 00000000`77120000 00000000`1539fd20 00000000`60c8f022 00000000`1539f450 : wow64cpu!Thunk0Arg+0x5
00000000`1539edc0 00000000`7457a13a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : wow64!RunCpuSimulation+0xa
00000000`1539edf0 00000000`771847c8 : 00000000`00000000 00000000`00000000 00000000`7efdf000 00000000`00000000 : wow64!Wow64LdrpInitialize+0x4b6
00000000`1539f350 00000000`771461be : 00000000`1539f450 00000000`00000000 00000000`7efdf000 00000000`00000000 : ntdll! ?? ::FNODOBFM::`string'+0x1fba1
00000000`1539f400 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ntdll!LdrInitializeThunk+0xe
FOLLOWUP_IP:
win32k!PFEOBJ::vFreepfdg+e8
fffff960`0011fda0 0fba60300f bt dword ptr [rax+30h],0Fh
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: win32k!PFEOBJ::vFreepfdg+e8
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: win32k
IMAGE_NAME: win32k.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5202fc4d
STACK_COMMAND: .cxr 0xfffffa6027acd1d0 ; kb
FAILURE_BUCKET_ID: X64_0x3B_win32k!PFEOBJ::vFreepfdg+e8
BUCKET_ID: X64_0x3B_win32k!PFEOBJ::vFreepfdg+e8
Followup: MachineOwner
7: kd> lmv m win32k
start end module name
fffff960`000d0000 fffff960`00389000 win32k (pdb symbols) c:\symcache\win32k.pdb\54B8C53009264F08A9D8CF1B4B56BCDC2\win32k.pdb
Loaded symbol image file: win32k.sys
Image path: \SystemRoot\System32\win32k.sys
Image name: win32k.sys
Timestamp: Thu Aug 08 04:02:53 2013 (5202FC4D)
CheckSum: 002B126B
ImageSize: 002B9000
File version: 6.0.6002.18912
Product version: 6.0.6002.18912
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 3.7 Driver
File date: 00000000.00000000
Translations: 0409.04b0
CompanyName: Microsoft Corporation
ProductName: Microsoft® Windows® Operating System
InternalName: win32k.sys
OriginalFilename: win32k.sys
ProductVersion: 6.0.6002.18912
FileVersion: 6.0.6002.18912 (vistasp2_gdr.130807-1537)
FileDescription: Multi-User Win32 Driver
LegalCopyright: © Microsoft Corporation. All rights reserved.
7: kd> .cxr 0xfffffa6027acd1d0
rax=00000000014c0000 rbx=0000000000000000 rcx=fffff900c009c2a0
rdx=fffffa802735ab80 rsi=fffff900c0b9b010 rdi=fffffa6027acda80
rip=fffff9600011fda0 rsp=fffffa6027acda30 rbp=0000000000000000
r8=0000000000000000 r9=0000000000000000 r10=fffffa802800a288
r11=fffffa802800a060 r12=0000000000000000 r13=0000000000000000
r14=000000001539ed50 r15=0000000000000001
iopl=0 nv up ei pl nz na po cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010207
win32k!PFEOBJ::vFreepfdg+0xe8:
fffff960`0011fda0 0fba60300f bt dword ptr [rax+30h],0Fh ds:002b:00000000`014c0030=????????

How to enable high availability on SQL Server 2005 with Windows Server 2008 Enterprise R2

Dear Folks,
I would like to ask you about this thing. I'm working for IT department for bank in Myanmar. Our bank have up to 96 branches across all of Myanmar including H.O. We are using Microsoft SQL Server 2005 with Windows Server 2008 for our banking
information system. My main problem is having to backup and restore the database backup files every time the servers in branches goes down for whatever reasons. I want to deploy this feature of high availability and failover cluster using Windows Server 2008
and SQL Server 2005. Our branches have 2 Servers. One is for Primary and other is for Backup. What I want to do is that, I want to change Backup Server to Primary Server whenever the Primary Server goes down for whatever reasons. All the working data and databases
from Primary will immediately replicated into Backup Server along with all the IP information of Primary Server. Please give me step by step guide for this process.

Try below
http://blogs.msdn.com/b/cindygross/archive/2009/10/23/checklist-for-installing-sql-server-2005-as-a-clustered-instance.aspx
I will recommend you to upgrade SQL server to newer version for support as well as flexibility.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

Deploy Software on Server 2008 Enterprise R2

Similar Messages

Maybe you are looking for