Deploy VMs with SCVMM 2012 R2 with Internet connection

Hello everyone,
I am trying to use SCVMM 2012 R2 to create a network that will eventually hold 2 clouds, but for the moment I can't seem to create the network and connect the VMs to the Internet.
My lab is this (all hosts are in a LAN, 192.168.0.0/24, gateway 192.168.0.1, and ONLY ONE NIC per HOST ):
1 host DC, DNS, SQL, SCVMM 2012 R2 (IP 192.168.0.8)
2 hosts with Hyper-V (IP 192.168.0.9 and 192.168.0.10)
I'm also planning to create some "virtual" networks for clustering and live migration, which will use the same physical NICs as the management network (since I have only one physical NIC per host).
Could you please give me a quick guide of how to set this up with SCVMM 2012 R2, so that I can take advantage of the new features (network virtualization, logical networks, logical switch) and for the VMs to be able to reach the Internet?!
Thank you so much.

Thanks for the reply.
My network architecture is exactly like the one described on your paper, with 2 differences:
1. I only have one host in the Production group and one host in the Gateway group
2. The first host has one physical NIC, the second host has 2 NICs, one internal and one with an Internet (routable) IP
After applying the logical switches on the hosts, I lost Internet connectivity on the gateway host (I have no idea why there is no logical Gateway Switch !!!). VMM completed the jobs with no error.
Any thoughts?

Similar Messages

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

Problem with internet connect?

Hi,
I have installed a Netgear wireless router, which is connected to my eMac by an ethernet cable. I can access the internet through Firefox without a problem, but when I try to check software update or get to the itunes store it says it cannot connect to the internet. I think that this must be something to do with internet connect, as when I log in a error message comes up on the screen and also the only options for connection when internet connect is opened is BT Voyager 105 (the previous ADSL Modem) and Internal Modem.
If anyone can offer any advice I would be very grateful!
Thanks very much,
Claire

Hi David,
I opened up Safari, went to preferences, and then clicked the advanced tab. There should be a button saying 'Proxies: change settings', I clicked on this and it opened up the network settings (through system preferences),and found that it was trying to connect through an old proxy set up whilst it was on a university network. I simply highlighted the proxy (xxxx.ac.uk), pressed the delete key, and then clicked on the apply now button. All seemed to work then! I suspect I was just lucky that this was the only cause of the problem, as it seems that some people have not been able to resolve their problem this way.
Hope this helps in some way,
Claire

Having trouble with internet connections using my Apple G5. Updates turn out to be incompatible with my system. What should I do short of trashing the wonderful computer and spending cash I don't have on a new iMac?

Having trouble with internet connections using my Apple G5 OSX 10.4.11. Attempts to upgrade FireFox or Safari results in being incompatible with with this system. Tried to locate earlier versions to replace upgraded incompatible software only to find that problems have worsened with crashing results. What should I do short of trashing this wonderful G5 and purchasing a new iMac which I really can't afford?
Chuck's Dilema

Hi Chuck,
TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/
I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
SeaMonkey seems pretty fast also, with many options...
http://www.seamonkey-project.org/
http://www.seamonkey-project.org/releases/
Might also look into iCab & OmniWeb versions.
Also...
The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
Texas Mac Man's Flash hack/post...
https://discussions.apple.com/thread/3599648?tstart=0
Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
Might be later ones around also... saw 11.3 I think.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html

Problem with Internet connection sharing between eMac and Powerbook G3

Hi,
I seem to be having a slight problem with internet connection sharing.
My eMac is the main machine with the internet connection, and its running 10.4.6, the Powerbook G3 is running 10.2.8.
I can connect them all up and get online with both, but I the problem I am having is when I turn the Firewall on on the eMac, the powerbook can't connect.
Is there anyway I can keep the Firewall enabled and still use internet connection sharing?

How do I know which ports the Powerbook is using?
Also I had web sharing enabled on the eMac and it made no difference at all.
Plus I don't know if this means anything to you, trying to decipher it myself, all I can make out myself on there is port 80.
May 31 21:26:30 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49743 67.15.24.40:80 in via en1
May 31 21:26:34 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49531
May 31 21:26:34 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49532
May 31 21:26:39 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49533
May 31 21:26:39 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49534
May 31 21:26:42 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49743 67.15.24.40:80 in via en1
May 31 21:26:44 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49535
May 31 21:26:44 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49536
May 31 21:29:12 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49746 17.254.0.91:80 in via en1
May 31 21:29:15 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49746 17.254.0.91:80 in via en1

Why am I having trouble with Internet connect?

I have just set up a broadband connection using a USB modem on my phone line. I have to reconnect each time I wake the computer from Sleep as the Modem gets its power supply through the USB port. Sometimes it takes several attempts to establish a connection. I have checked the configuration (several times). Is the problem most likely to be:
a) With Internet Connect ?
b) With my ISP?
C) With the modem?
G4 ibook Mac OS X (10.4.8)
G4 ibook

My guess, the modem.
It's probably taking some time for the USB modem to power up, perform its startup tests, load its configuration and be ready to respond to the network.
It's one of the reasons I never recommend USB DSL routers.
If the modem supports direct power (vs. being powered by the USB line) you can try using that - at least that way the modem won't power down and need to do its whole startup process again. Either that or replace the USB modem with an ethernet-based one that won't have this problem.

Issues with internet connection. Logic board?

I have a 17" MacBook Pro (Late 2008) 2.5 GHz Intel Core 2 Duo, serial ...GV3R9. More often than not my internet gets disconnected. The Wi-Fi icon indicates it is ON, but there is no connection at all. Then if I manually turn OFF the Wi-Fi, it won't turn back ON again until I restart my computer, sometimes more than once until the internet connection is active again. I could not identify a pattern of when the Wi-Fi turns OFF. I suspect something could be wrong with the Logic Board, but I don't know how to diagnose it. Any ideas?

Does this WIFI issue happen everywhere (other networks outside your home) or is it limited to your home WIFI network? If it's just your home, then the problem is with your home router. If the problem is everywhere, then it's suggested that you back up all your personal data and then erase and reload the OS on the laptop first and retest the wireless capabilities before loading anything back on it. If it works fine, then it was just a borked OS load. Restore your stuff and go from there. If it behaves the same way, then it could be hardware related, but it's probably just the WIFI card on it and not the entire logic board.

Script Alert: ...problem with Internet connection

Since upgrading to 1.0.3, I get this alert every time I launch Bridge. There is a problem with your Internt connection. Please check that you are connected to the Internet and please try again."
I am definitely connected to the Internet and there's nothing wrong with the connection when this happens.
Any way to get it to stop?
WinXP Illy CS2 installed, none of the other suite.
Thanks in advance,
T Toomey

Toni,
That is Adobe StockPhoto attempting to go out and touch it's server on startup.
The only fix I know of is to rename the ols.jsx file to something like old.jsxNoLoad or move it to another folder.
That script list located in the startup scripts folder:
PC - c:\Program Files\Common Files\Adobe\StartupScripts
Mac - /Library/Application Support/Adobe/StartupScripts
I am not certain of what effect this has on StockPhoto. (I don't work on StockPhoto, I am only relaying information to you from the Bridge forums). If it breaks StockPhoto and you need it, you can rename the file back to ols.jsx when you need to use it and are connected to the internet.
Bob
Adobe Workflow Scripting

Anyone having trouble with internet connection after downloading mountain lion

After installing Mountain lion to my mid 2011 imac 21" I am having trouble with my internet connection. Anyone else have to deal with this?

Are you on 10.8.2 as ypur profile says? If so, it's worth updating to 10.8.3 which was released last week.
http://support.apple.com/kb/DL1640
Here's a link to some suggestions that helped some users with similar problems in Lion. May still be relevant to MLion. Also check the links within the article:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook
Also when I had wifi problems in the past, creating a new network location resolved it:
http://support.apple.com/kb/HT5289 (under the heading 'Making New Locations'.
I've also seen threads where users with wifi problems have successfully solved them by changing the channel in the router's wifi settings.

Trouble with internet connection after update to Snow Leopard

Happily surfing the internet with the most recent update of Tiger until deciding to upgrade to Snow Leopard so that I could connect to a wireless printer. Noticed almost immediately that Safari was spotty, sometime normal, but often painfully slow. Have checked forums that suggest dumping caches, reseting Safari, repairing permissions, doing fresh install of SL. Nothing has worked. Can't even get internet with Firefox. Internet connection seems to work after I start up, but then fails after 5-10 minutes. Most of the time it doesn't work at all. Doesn't seem to be a problem limited to Safari since Firefox won't work either. Phone support tried saying that SL likes a WPA router connection and not WEP, which is the current setup.
Finally, I decided to boot to my clone of Tiger. After a little bit of fussing around setting up the internet connection over Airport everything works just fine! What's wrong with SL and how can I fix it. Really like the iLife11 upgrade and being able to print wirelessly, but if I can't get internet access that makes it rather pointless. Know this is a lot and rather hastily written, but please help!

Hello
Sorry, I have no answer to your problem. I just want to share that I amexeprience similar issues with my iMac since I upgraded to Snow leopard :
The LAN connection of the iMac slows down after accessing Internet, usually less that one hour. I can measure it through an Internet throughput utility on my provider's home page.
I have two Macs connected on the same DSL box, with the same OS version, Snow leopard, and nearly the same sofwtare configuration. Thus I can compare the Internet access speed :
After starting the computers, it is above 12 Mb/s.
On the iMac that I use most for Internet, it slow down to more or less 2 Mb/s after a few minutes, whereas it stays at 12 Mb/s on the MacMini.
Because of this, I believe it is LAN problem, not an Internet/DSL problem.
The same phenomenon happens if I connect to my DSL/Router with Ethernet or with Airport. The speed drops to similar values, below 3 Mb/s. Thus, the problem dose not seem to be related to LAN connection hardware.
Curiously, the speed is high again after shutting down and restaring the iMac. But it slows down again after a few minutes. Putting the computer to sleep does not help to restore maximal speed: it has to be shut down.
From all this, I draw the conclusion that the problem lies in a LAN software layer that is common to Ethernet and Airport and that is restarted only after shutdown.
I am using the MacMini as a reference for Internet access performance, in order to have a benchmark for iMac performance. I hav enot tried yet if the LAN performance of the MacMini collapses in a similar way if I use it to surf on the net.
I hope this will be helpfull do draw some attention from experts at Apple. It looks like a bug in a Snow Leopard LAN software layer.

Help with Internet connection (WRT54G)

Hopefully someone has some helpful advice to my question.
I'm not too sure where my problem is. I think it's in the modem, but could be the router (less likely as explained).
I recently set up to open a few ports (I dont remember the exact #s) through port forwarding for Warcraft III. To do so, you need to set up a custom IP for your connection through 192.168.1.1xx. I did all this and was happy to see that I could now host online games for Warcraft III. Fast forward to a week ago (I probably turned my desktop on about 3 times between the first time of opening ports and from successful uses until now) and I am unable to connect to any sort of Internet, [b]on my desktop only[/b]. My 3 laptops I have work just fine, but my desktop will not connect. I'm not a computer dummy (but no computer expert either, I know my stuff) and have tried everything I could think of between setting up static IPs (192.168.1.99 is a static IP I do believe?) to obtaining IP addresses automatically to turning off the router and modem, etc. and nothing. I am unable to even get to 192.168.1.1 to try and change my past changes and see if that would work. Because of that, I'm at a loss.
Hopefully someone here will be able to help me. I can still access everything on my desktop, there's just simply no internet connection.
Thanks in advance

there seems to be consistant issues with Linksys routers according to all the posts ive been reading for the past month while i try to fix my on and off again internet connection. its becomming very annoying. i have asked my cable company to replace my modem, which they did and that didn't even help. last year i bought a new linksys router thinking it would solve my problem back then. it did for a while, then my lap top wouldn't connect any, so i sent it into have it checked and it came back with no problems. soooooooooo apparently, while i am connected to my neighbors open connection from his BELKIN ROUTER and even though the signal is very weak............amazingly enough!! i am still online while typing this.......funny eh?? WELL........it seems to me......that i guess i wont be buying linksys anything anymore. Especially after spending hours on the help line (INDIA) trying to reset channels and reset the router box itself. i give up.......i have 2 pieces of crap routers for sale cheap......any takers? dont waste your time.

Configuration update with Internet Connect and connection blockage

I have been having the same sort of problems (i.e., suddenly for no apparent reason, being unable to get or maintain an internet connection). I use an internal modem and Earthlink to connect, not dsl or cable. I ran across a discrepancy concerning configuration updates between the three places that allow me to select "Connect" (1) Sys Prefs-->Network-->can select from different configs/locations (2) Internet Connect-->can select from different configs, and (3) Earthlink's Total Access-->can select from different configs/locations.
I noticed that in Internet Connect the dots that represent my password were longer than that in Sys Prefs-->Network, but all Keychains contained the shorter, correct password. I can't change the password nor change or delete the configs in Internet Connect.
When I created a new config/location via SysPrefs-->Network, it showed up in Total Access, but not a peep of it in Internet Connect. Have tried trashing the prefs files for Internet Connect as well as deleting almost all keys in Keychain that relate to online access. No change.
I can now get and maintain a connection only if I connect using Network or Total Access. Any ideas on how to fix Internet Connect application?

I don't know if I can help much, but I think elko has the right idea about repairing permissions after an update. It's good practice to use Disk Utility to verify and repair if necessary both permissions and the disk. This will sometimes resolve the problem.
Another thing to check is all your settings for internet under system preferences. I have heard about things ending up too low in the heirarchy and not working properly for reasons that are unclear. You may be able to reconfigure it.
It is also possible you have an airport card that is failing intermittantly. You can try running the Apple Hardware Test and see if anything shows up in the form of an error code.
You could also try turning off the airport and seeing if you can connect by dial up using the internal modem. If you can, the problem may be with the airport. If you cannot, there is something else going on.
One long shot might be to turn the computer off and remove both the power cord and the battery for 30 minutes or so. You will have to reset the date and time after this. But sometimes things do "reset" and start working again.
As it happens, I have not had any problems on my iBook G4 following the latest updates, so it is likely not too common a problem. Your question has been out here for some time, and I hope someone more knowledgeable than I am will be able to suggest more things to try.
Please post back and let us know if anything has helped.
Good luck!

Problem with internet connection after update ...

Hi
I have install the new update firmware for my ipad 2 (5.0.1) and immediatly after not internet connection possible. My setting have been erase (same with my ipod itouch update). I try to connect at my routeur with right password but doesnt working .... I have already install update last time and never have this problem.
Have you an idea why it's not working ?
thanks of advance.
Thekeep

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
 Cheers, Tom

Powerbook: erratic startup, laboured noises & crashes with internet connect

Hi,
Any advice would be greatly appreciated:
I have a Powerbook G4 and I have been running OSX (10.4.3) on it for a while now and I haven't had trouble until recently.
I have a suspicion my internet connection is somehow confliciting with the operating system. I don't know if this is a powerbook or a tiger problem.
Basically I was busy attaching a file to an email when the computer went into this strange dazed mode of being unable to do anything. It seemed to have frozen. I couldn't force quit Mail (or any application) so I shut down the powerbook using the power button on the keyboard.
When loading up again it took much longer to boot up. Sometimes it never got passed the twirling circle of lines at startup.
When the powerbook did load up it went through a few stages of blue screens - sometimes it even went into a second round of loading up before going into the OS.
When it did boot up I found that when connecting to the internet it immediately froze.
The computer is also making a strange repetitive, laboured noise.
It is erratic - booting up sometimes and other times struggling for so long that I have to shut it down by means of the power button.
The only two things I have done differently recently are:
1) enabled my bluetooth and had some files transfered from two different mobile phones and;
2) connected a stranger's iPod to my mac - which hasn't been connected to my computer before
Not sure if any of these could have caused such discontent with my otherwise trusty Powerbook?
Is this the end?
Powerbook G4 Mac OS X (10.4.3)

Hi, Warwick, and welcome to Apple Discussions.
The computer is also making a strange repetitive, laboured noise.
This is the salient fact; all else is just details. First make sure there is no disc in your optical drive. If that drive is empty, what you are left with is a classic signal of hard drive mechanical failure. Immediately, before you do anything else, get to work copying all the important un-backed-up data on the hard drive to other storage media. You may not make it all the way through this process before the drive dies entirely, so identify the highest priority files before you begin, and back them up first. There's no telling whether your hard drive will last another month, week, day, hour, or minute, so don't put this off. It will go fastest and most easily if you back your files up to an external FireWire hard drive, so if you don't have one already, this may be a very good time to buy one.
Hard drives are mechanical devices, and sometimes they just fail. You probably did nothing at all to cause the failure, and it certainly had nothing to do with the internet.
Replacing the hard drive in a Powerbook is an easy ten-minute procedure, for which instructions are printed right in your Powerbook G4 Getting Started user's manual. Replacement drives are available from scores of online vendors and bricks-and-mortar retailers, in capacities from 20-30GB up to 160GB and at prices from about $65 to more than $200USD. $100 gets you the pick of many midrange, midspeed, midpriced drives. I can't suggest where you might want to shop in the UK.

HT1349 problems with internet connections

ISSUE : I am having trouble loading common internet sites like youtube, ebay, google, etc. This issue doesn't occur everytime but often enought for me to seek help. This is my first Macbook and I dont know if it is the computer or if it is a issue with my internet provider. Also, strange enough my girl friend's Acer computer (Window 7) has no issue with failed connections. We can be sitting side by side and my computer not load a site while hers loads the site without issue. I would appreciate any help on the issue.

Have you checked to see if a firmware update is available for your router?
And what specifically are the symptoms? Do you get a connection, but no apps work? Is it able to find the network at all?

Deploy VMs with SCVMM 2012 R2 with Internet connection

Similar Messages

Maybe you are looking for