Deploy Webdynpro ABAP application without logon portal
We have a Webdynpro ABAP application bulit in ECC to deploy. User wants to access the application via an URL on their webpage instead of logon SAP portal. They do not want the application to show the portal header and navigation area.
With the help of portal support, we created an URL iView to access the application with parameter NavMode=3 (e.g. http: //portal.xxx:8280/irj/portal/index.html?navigationtarget=roles://portal_content/mycompany/application.iView
/WDApplication&NavMode=3). This method can fulfill user's requirement. However, we have to hardcode the Webdynpro ABAP application URL in the iView (e.g. http: //devep.xxx:8000/sap/bc/webdynpro/sap/WDApplication). This will be a disadvantage because the URL will be http: //qasys.xxx in QA environment and http: //prodsys.xxx in production environment.
Can someone suggest a solution to me? We do not use NWBC. Thanks.
Hi.,
I think only after moving to PRD., the client will use the application rite.!! so u can directly give PRD url in ur iView.,
If it is in application ., we can get Host and Port., but we have to hardcode the url., So I am thinking better to give PRD Url in iView.
Thanks & regards
Kiran
Similar Messages
-
WebDynpro ABAP application issue from Portal after ECC 6 upgrade to SP14
Hi,
We have recently upgraded the Kernel, ABAP and Java stack of ECC 6.0 system to SP14. After the upgrade most of the WebDynpro ABAP applications doesn't load and just flickers when run from Portal as a WebDynpro iView, but they run perfectly fine when accessed directly using URL. These were running fine prior to the upgrade. Can someone suggest what can be going wrong.
Will reward points for helpful answer.
Regards
MukeshHi Mukesh,
As Gajendra said, restarting the service in SICF sometimes works for us, but not always. We have also had to deactivate the entire Webdynpro node, and then reactivate it and all of the services below it.
Obviously something changed in the SP, given that we now have to do this every time we create a new WDA application.
Cheers,
John -
Webdynpro ABAP application integration with portal
Hi,
Can someone provide me the complete documentation for
1. webdynpro ABAP application development and
2. webdynpro ABAP application integration with enterprise portal.
Thanks...
Kundanhi Kundan ,
design pattern or paradigm followed by Webdynpro ABAP is
MVC concept
M-Model
V- View
C-Controller
and cms with the advantages like Structuring the programming
Creation of easily manageable application blocks
Reusability of whole components
for more documentation about WD ABAP , refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/3545415ea6f523e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/nw-ui?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
SAP netweaver provides the integrationof ESA , for integartion netweaver provides us wid the People Integartion
refer
http://help.sap.com/saphelp_nw70/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
as well
I hope it helps
rgds,
amit -
Putting Webdynpro ABAP application on portal
Hi all,
We have SAP ECC 6.0 as the ABAP system and EP 7.0 SP 6 is the portal. I want to show a Webdynpro ABAP application on the portal which I have created in the ECC system.
I have an created an application in the back end with the following parameters :-
Webdynpro Component name :- ZTESTWEBDYNPRO
Webdynpro Application name :- ztestwebdynpro
I then created a Webdynpro ABAP iview with following parameters :-
Application name :- ztestwebdynpro
Namespace :- sap
System :- SAP_ECC_SERP (this has been tested and is working).
We also have SSO configured with logon ticket to the ECC system.
But I am getting a "Page cannot be displayed" error when I execute the application.
Any idea why this can occur?
Thanks,
Hari
Message was edited by:
Hari
Message was edited by:
HariHi Hari,
So assuming you have tested the connection to the system,
perhaps another service, BSP, ITS , whatever
and that it is creating WEB DYNP ABAP iviews that is the drama.
Under EP 7.0, be sure to choose Iview type WEB Dynp ABAP.
the properties page with application parameters is:
SYSTEM -> As created to access system, available in dropdown
Namespace - > sap
Application name -> <your WDA> case as created in SE80
So it looks like you have entered correctly to me.
Perhaps the portal Forum has more info if you have continued issues.
regards
Phil. -
Webdynpro abap application for HCM
Dear all,
In enterprise portal->Content Administration->PortalContent->Content provided by SAP->line_manager->Manager Self-Service->iviews->HCM-> there is a PCR application by name "personnel change request". this is a webdynpro java application.
I have installed latest business package of ESS/MSS. so there should be both dynpro java and dynpro abap application. kindly tell me that for the personnel change request PCR application in which package can i find the wendynpro abap application.
Regards,
BharathDear Bharath,
I am no expert on the topic but i can definitely answer your last question.
Yes, Webdynpro ABAP applications are available in the latest versions.I have seen this in ECC Enhancement Package 3 (ECC 603).
I can't really tell you much abt PCRs but the Requisition forms(SRQ3) in 603 are based on WDA application.If interested you can check the Recruitment work center in MSS.
Also, please ensure that the relevant Business Function/Services are activated when using the enhancement packages to see the relevant functionalities.
I think you need to activate the HCM administrative services BF available as of 602 . This definitely uses webdynpro ABAP applications in the portal.
Regards,
Sowmya
Edited by: Sowmya Kadambi on Dec 23, 2008 3:23 PM -
Webdynpro ABAP application for specific Country
Hello Consultants
We have developed a custom Webdynpro ABAP application and the service is working alright.
The probelm is that this service is to be enabled only for one Country i.e. India and this should not be visible for other country users.
I have created resource, service and country-specific service for this application and linked the country-specific service to India. Even after doing this am not able to stop the availability of this service other countries.
Shall be thankful for an immediate response.
S. ChandrasekaranDear Bharath,
I am no expert on the topic but i can definitely answer your last question.
Yes, Webdynpro ABAP applications are available in the latest versions.I have seen this in ECC Enhancement Package 3 (ECC 603).
I can't really tell you much abt PCRs but the Requisition forms(SRQ3) in 603 are based on WDA application.If interested you can check the Recruitment work center in MSS.
Also, please ensure that the relevant Business Function/Services are activated when using the enhancement packages to see the relevant functionalities.
I think you need to activate the HCM administrative services BF available as of 602 . This definitely uses webdynpro ABAP applications in the portal.
Regards,
Sowmya
Edited by: Sowmya Kadambi on Dec 23, 2008 3:23 PM -
How to deploy the webdynpro ABAP application in Portal
Hi,
Can someone provide me, all the steps involved to deploy the webdynpro ABAP application in Portal.
Thanks,
KundanHi Kundan,
First create a WD abap component and then you have to integrate in the portal.
Refer this article [Integrate a Web Dynpro Application into the SAP Enterprise Portal|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/7bfea990-0201-0010-44a7-84a74971b795&overridelayout=true].
I hope it helps.
Regards
Arjun
Edited by: Arjun Thakur on Sep 22, 2009 2:20 PM -
Launching webdynpro ABAP application from workflow task (without UWL)
Hello,
How can i start webdynpro ABAP application from workflow without portal?
Workflow and webdynpro ABAP are located on the same system.
I assume it must be possible without transaction SWFVISU.
thanks
Regards
PaulFirst you need to define a external service then you have to generate a task from this external service and then you need to include this task id in you workflow for a ACTIVITY step then this step can be either background or can be assigned to any agent
you have to make use the below two Txn
WF_HANDCUST and WF_EXTSRV -
Calling Portal iView from a WebdynPro ABAP application
Hi ,
I have a requirement where I need to call an iView in my portal from the Webdynpro application also existing in the portal.
Can anyone provide me the method with source code( if possible ) to call an iView existing in the portal from the WebDynPro ABAP application.
Best Regards
SidHi Siddharth,
Well, I think you can go for Portal Navigation concept.
Please check the required source code in WDR_TEST_PORTAL_NAV Web Dynpro component. That will illustrate both Page based Navigation and Object based Navigation.
Hope that should solve your problem.
Regards
<i><b>Raja Sekhar</b></i> -
WebDynpro ABAP application opening blank in portal
Dear All,
There is a strange issue which is being faced by one user. when the user tries to access a Webdynpro ABAP application in Portal then it opens in new window but nothing is displayed in the tray. Now when the user right clicks on the opened window->properties and copies the url from properties and pastes it in new tab (IE 8 is used) then the application opens and works fine.
The portal and backend roles are fine for the user as he can access/work when the application is opened using the copied url.
Please suggest what could be the problem for the user. For other users the issue mentioned is not there.
Regards,
SamirHi Samir,
Pls look into these threads -
IE8 problem (WebDynpro ABAP iView call)
WebDynpro for ABAP and IE 8.0
Regards,
Sen -
Calling a portal page from WebDynPro ABAp application
Hi,
I would like to call a portal page (any type) from a WebdynPro ABAP application. I have the PCD location of the page.
Which call shall I make :
Absolute Navigation
Relative Navigation or
OBN.
Also, can anyone send me short code snippet on the following.
The package SWDP test examples are not working.
Best Regards
SidHi Siddharth,
Well, to start with you can go for ABSOLUTE NAVIGATION.
Secondly, you can find the snippet here
DATA LO_API_COMPONENT TYPE REF TO IF_WD_COMPONENT.
DATA LO_PORTAL_MANAGER TYPE REF TO IF_WD_PORTAL_INTEGRATION.
DATA L_NAVIGATION_TARGET TYPE STRING.
LO_API_COMPONENT = WD_COMP_CONTROLLER->WD_GET_API( ).
LO_PORTAL_MANAGER = LO_API_COMPONENT->GET_PORTAL_MANAGER( ).
MOVE 'pcd://portal_content/com.xxxx.zpof_f_XXXXportalcontent/com.xxxx.test/com.xxxx.folders.MaintenanceBusinessPackage/com.xxxx.test.mt.pages.Pages/com.xxxx.pages.MaintenanceTasks'
to l_navigation_target.
CALL METHOD lo_portal_manager->NAVIGATE_ABSOLUTE
EXPORTING
NAVIGATION_TARGET = L_NAVIGATION_TARGET
* NAVIGATION_MODE = IF_WD_PORTAL_INTEGRATION=>CO_SHOW_INPLACE
* WINDOW_FEATURES =
* WINDOW_NAME =
* HISTORY_MODE = IF_WD_PORTAL_INTEGRATION=>CO_NO_DUPLICATES
* TARGET_TITLE =
* CONTEXT_URL =
* POST_PARAMETERS = ABAP_FALSE
* USE_SAP_LAUNCHER = ABAP_TRUE
* BUSINESS_PARAMETERS =
* LAUNCHER_PARAMETERS =
Above it, the examples of SWDP will not work if you test them from SE80-ABAP WAS...I suggest you to create a WDA IView in Portal and test it in Portal itself.
Hope this should solve your problem.
Regards
<i><b>Raja sekhar</b></i> -
Apply custom themes to WebDynpro ABAP application in Portal
Hi,
We have just upgraded the E-Recruitment to EHP4. We have two instances of ECC in which one acts as HR instance and the other one for E-Recruitmet. We have created custom themes for portal and need to apply the same for the WebDynpro ABAP applications for E-REcruitment. I have downloaded the theme and from portal and uploaded the same in MIME folder using SE80 transaction. I have also added the parameter sap-cssurl=/sap/public/themes/<my custom theme folder name>.
Also tried giving the url in application parameter as
SAP-EP-THEMEROOT=http://<hostname>/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/customer/<custom theme>
Is there any other way to apply themes for WD ABAP applications. I dont want to customize the standard applications and just want to apply the themes.
Any suggession on this is highly appreciated.
Kind Regards,
Vivek.Hi,
to create theme for webdynpro abap application, use Eclipse Plugin. Please remeber to check the version of theme file before using theme.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d5ef40-465e-2c10-9ca9-f548bfc3f236
setup custom theme for webdynpro abap application.
FEATURED EVENTS
Regards
Baby -
[HELP] Webdynpro Abap application keeps refreshing on Portal
Hello Gurus,
Im facing a really annoying and weird problem, i've created a screen exit on the transaction IW21, on this screen i have a custom container, and im using the class cl_gui_html_viewer to show off a webdynpro abap application on this container. If i access IW21 via SAP GUI everything works fine, no problema at all. But once we've published this transaction IW21 on Portal something very weird happened, the webdynpro application keeps refreshing on every action done in the screen. I've entered on debug mode to verify if the program is performing the code to create the html object again, but the program pass in the perform only once. An example: when i click in save the program pops a screen to choose some characteristics and i can clearly see the webdynpro application refreshing under this screen, like if i press F5 on browser. As i said everything goes pretty much fine in SAP GUI, but in Portal keeps refreshing.
Anyone have any idea how can i solve this?
Regards,
RafaelAre you calling ITS transaction and Webdynpro application is within this transaction?
Regards,
Nitesh -
Iview for Webdynpro ABAP application with TimedTrigger
Hello,
I created an IView for a WebDynpro ABAP application. This application uses a UI element TimedTrigger. Without portal integration this TimedTrigger works fine. Inside an IView this TimedTrigger element does not work anymore. Did anyone have a similar problem? Does anyone have a solution for this?
Thanks and regards
Marchi,
Go through this link
[****************/Tutorials/WebDynproABAP/TransactionCode/Create.htm]
Hope it will help you.
Regards,
Rohit -
How to Call the RFC in Webdynpro abap application
Dear Experts,
Good Evening to all...
I have to add two numbers using RFC in webdynpro abap application. If we give the numbers in the input screen then the RFC should add it and give it in the output screen. This is the application for that I have created the RFC.
But the problem is i don't know how to call the RFC in that Webdynpro abap application and how to link the input view and output view with that RFC...? I am new to Webdynpro abap. Please kindly help me on this... I am struggled here... I need your help in this....
Thank You.Hi Jaga,
You asked the same question again.
Without closing the [previous one|Re: Where SAP store the uploaded files?].
I think Abhi has answered your question.
If not please elaborate on the problem.
The solution btw is to create a Service Call.
Sumit
Maybe you are looking for
-
I just restored my iPhone so i could get rid of my other data but all it did was increase my other data by .5 gbs. How do i get rid of the "other data"?
-
24" cinema display flashes when plugged to an imac
Hello, I have a 24" cinema display and a 20" apple display connected to an iMac 2011 27" with an ATI Radeon HD 6970M 1 GB. The 24" Cinema display starts to flash quickly after the boot of the computer. Apple technician told us however that this confi
-
Hi folks, I have recently started to use Time Machine and I own two Macs, a MBPro and an iMac. The external disks (two) are FireWire and formatted to HFS+, and stay connected all the time to the iMac. Both Macs are running Leopard updated to 10.5.6.
-
Substitution exit for asset master is not getting triggered.
Hi I have created a substitution exit program ZGGBS000 having exit U215 and U216. If the Asset affirm value is initial , then WBS elemnt value will copied to asset affirm value field in the table ANLA.But it is not getting tiggered, when i am trying
-
Lion Server: How do I import into the central address book?
Hello I could successfully import addresses into the local address book of my Mac Mini (using the import function of the address book application). However, I want the addresses to be in the central, shared address book of the Lion Server. I can't fi