Deploy win7 via ConfigMgr12 r2 with secondary keyboard

Hi All
My infrastructure is SCCM 2012 r2 with MDT 2013 installed on Server 2012 r2 virtual machine in Hyper-V.
I want to create image of WIN7 with English interface and default English keyboard and Hebrew as a secondary language.
If you configure this setting before SYSPREP during the CAPTURE deleted this definition.
And if during the DEPLOY set the keyboard so the keyboard Hebrew selected as a first language,
And I want that English will be the first language and second language Hebrew.
I'd love your help
Ran

Hi,
I have to say that you can use the English interface when deployment, it can be set at the WinPE phase by a component, script should be like this:
As for the second keyboard language or input method, I think you should configure this at the client image that you want to deploy to other computers:
http://windows.microsoft.com/en-us/windows-8/add-language-keyboard
Regards
Wade Liu
TechNet Community Support

Similar Messages

Deploy win7 and linux image with MDT

We have been using mdt 2010 for our deployment in the last few months. It works perfectly. Now i am facing a bit problem, our organization decide to include a linux image into the standard one. Is there anyway we can deploy this linux image in mdt?

Sure you can, but it's not supported (at all) by Microsoft... :)
It's been a while, but I have tested two ways of doing this
1. Have a custom task sequence create a 50 MB fat partition, make it bootable using syslinux, copy the linux boot image to c:\, copy the kickstart script, create the syslinux.cfg, reboot, allow the kickstart setup to do the rest...
2. Have a custom task sequence use a disk image utility like dd for windows to just dump a cloned image...
I like option 1 the most...
Please don't consider dualbooting, its a beating, it just adds additional complexity... If they really need Linux and Windows on the same box, run Linux in a VM (or the other way around).
/ Johan

SCCM deployment Win7 with multi language pack & software update languages

In our company we have a running SCCM infrastructure and deploy Windows 7 x64 (en) with all language packs. Now we integrate the software updates management process into SCCM.
My question is: Do we need to download and synchronize the software updates in all available languages or is English enough?
Thank you very much for your support!

Hi,
We don’t suggest deploying all language packages in one time. You may deploy default language and let users choose which language
package to install in Windows Update to save the network traffic.
Regards,
Sabrina
This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.

Deploy Powershell 3 to Win7 Via SCCM 2012R2

Is it possible to deploy Powershell 3 to Windows 7 clients using SCCM 2012R2? Or WSUS?
I have read a few blogs describing different methods such as dism to repackage the cab file or using a scripted deployment type (Windows6.1-KBxxxxxxxx64.msu /quiet
/norestart) but i can not get it to install the update. My aim is to get the app-v 5 client on windows 7 desktops so powershell 3 is a requirement.
Has anyone worked out how to deploy it?
Many Thanks Dave

If you're clients are currently at PowerShell 2, I would recommend installing Windows Management Framework 4 instead of 3. WMF4 has lots of powershell and WMI improvements over WMF3.
To deploy WMF4, create an Application with two deployment types (one for x86 and one for x64). The program is pretty simple - you just need something like "WUSA.EXE Windows6.1-KB2819745-x64-MultiPkg.msu /quiet /norestart". For a detection
method, the easiest thing to do is a file version check on "%windir%\System32\WindowsPowerShell\v1.0\powershell.exe"
Use the WMF4 Application object as a pre-requisite for your App-V 5 Client.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

External display's brightness can no longer be controlled with external keyboard in 10.8.2

I can no longer control external display's brightness with external keyboard.
Until now my external keyboard controlled external display's brightness and MBPr's keyboard MBPr's brightness. Now the only way of changing external display's brightness is via Display preferences which is cumbersome
Is there any way of going to pre 10.8.2 settings?

I noticed that the keyboard and tablet were'nt working when plugged into a usb hub or monitor usb port. I had to plug in the keyboard and tablet into a mbp usb port where they worked. For some reason, after plugging them back into the usb hub they worked again. Could just be dumb luck though.

Can I buy a MacBook Pro 15" Retina, at a US Apple store, with Portuguese keyboard?

I am in the process of buying a MacBook Pro 15" Retina laptop; although based in Dallas, TX I have a strong need for portuguese keyboard, which I cannot order online (Spanish is the closest offering, but not close enough).
Can I buy a MacBook Pro 15" Retina laptop, with Portuguese keyboard, at an Apple store?

I went to an Apple Store, near my house. One of the employees showed me that she could not order it either (sorry, looks like it is really not an option within US).
She offered an alternative / fix: she could order a Portuguese wireless keyboard, that can be connected via Bluetooth.
Hope this helps.

BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network

I'm trying to create an "ExtraLarge" VM with multiple NICs. The New-AzureVM returns the following error:
BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network
interfaces are not supported in the same deployment, also a virtual machine having no secondary network interfaces
cannot be updated to have secondary network interfaces and vice-versa.
But I have no other VMs. Or at least I did and then deleted them and all their disks. The service has no deployments (either staging or production).
Why is New-AzureVM complaining about a mismatch of VMs with and without secondary network interfaces when no other VMs exist?
I have tried many things to fix this, including the deletion of ALL of my resources. I have deleted and created the service many times, both with an affinity group and without. I have a screen print of the -debug output if your interested.
Thanks for the outstanding help.

Hi Ron,
IMPORTANT NOTE: Please do not post the CONFIDENTIAL DETAILS ever on the public forums, this is HIGH RISK action.
Please send an email with your contact details to my email
[email protected] so that I guide you on steps which help you come out of the current scenario. Thank you for understanding.
I suggest you to create a new VNET and new VM with cloud services. Create Multiple NIC VM. Let us know the results.
Ref:
http://azure.microsoft.com/blog/2014/10/30/multiple-vm-nics-and-network-virtual-appliances-in-azure/
http://blogs.technet.com/b/canitpro/archive/2014/11/04/step-by-step-create-a-vm-with-multiple-nics-in-azure.aspx
If you are unable to create a VM with multiple NIC, please open a support case as it requires more confidential information which is out of scope of FORUM support offerings.
Regards,
Girish

Partial insert with secondary index

I'd like to use partial inserts (DB_DBT_PARTIAL).
However, I also need secondary indexes. Now when I insert partial data, the secondary index function is immediately called, but still I do not have enough data to calculate the secondary key. I tried to supply some app_data do the DBT, but it does not reach the secondary index function.
Is there any way I can use partial inserts together with secondary indexes?

When writing a partial record to the primary database, here's what we do:
1. Look up the existing record via get()
2. Using the existing record and the partial DBT, construct the new record
3. Pass that newly constructed record to the secondary key generation function
You don't need to do anything special, your callback will receive the full record, even though you passed us a partial DBT. If that's not the case, there's a bug in BDB and we'd need to see your code.
app_data is a private field, you should not try to use it or expect it to work predictably. In this situation, we're passing a brand new DBT to the callback function, not the DBT you gave us. That's why app_data is empty.
Thanks,
Bogdan Coman

How to find using SQL query application deployed on win 7 machines with SCCM 2012 server or user installed manually.

Hi,
how to find using SCCM SQL query, application deployed on win 7 machines with SCCM 2012 server or user/technician installed manually. Please let me know.

Thanks, is it not possible via any script also?
Like Torsten said, how can you tell the difference between CM12 installed applications and locally installed? Once you can answer that, then you can write report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Something weird with the keyboard

Hello everyone, i have this strange problem with my wireless keyboard. Everytime i type down a letter, it appears down as many times as i hold the button. Every letter, except X. It is the only letter that i can only type one time, even if i hold it down for several seconds. I don't think there is something wrong with the keyboard or the specific number, because when I hit it again and again the letter appears. Only when i hold it down it only appears once. I know this is not something to bother about, since i can type the letter, but i am curious to find out why this happens. If anyone could tell me, please, do not hesitate

Quote from: sjay on 18-April-11, 04:52:57
This is due to the manufacturing of the keyboard itself. The way its setup is that the keys that are giving problems are obviously located on a different chip and are being recognized as a different device, therefor fail to start or function at all in lowlevel driver enviroment.
There are threads all over the internet about how these expensive keyboards are causing problems with Win7 because of how they are made. Just don't buy too expensive of a keyboard that has a bunch of extra things because those "extra things" are handled differently then a typical keyboard, which is counted as one device. My Saitek red Eclipse works perfectly fine, though it doesn't have extra programmable macro buttons or anything (and thats why it works). It does have volume + -, mute, and backlight adjustment buttons though.
Surely that cannot be the case. This keyboard works fine with every other motherboard including the lower-end P67S-C45 that I have sitting next to me. Also, lets not confuse the issue, this problem does not affect Windows.

..manage the volume of each Airtunes speakers with an Keyboard Shortcut??

Hi,
I´m using Airtunes together with two Airport Express.
How can I change the volume from only one Airtunes speaker separately with a Keyboard-Shortcut?
Is there a shortcut?
greetings

I don't know of any keyboard shortcuts for this. It is a new feature of iTunes 10. Remote (iTouch/iPhone) doesn't allow this kind of control so I don't know what you can do other than to VNC into your Mac and change the settings manually via iTunes. Hopefully someone else will know

Deploy Smartview via SCCM 2012

I have tried everything - even calling for support which got me nothing!
How do you deploy Smartview via SCCM? What command line works? All their docs S-U-C-K and do not work!

Hi,
Am not very sure of this as i work on Hyperion but not on SCCM. but you can give a try to check with your SCCM team with below command. We have mst developed which updates the registry keys so my command looks like below.
msiexec /i "D:\OracleHyperionSmartViewforOfficeFusionEdition.msi" transforms="D:\OraHyperionSmartVw_111210_00.mst" /qb!
if you dont have mst then you can use something like msiexec /i "D:\OracleHyperionSmartViewforOfficeFusionEdition.msi" /qb!
Hope this helps.
Thanks
Amith

WinPE Error Capture and Deploy Win7 - SCCM 2012 R2 w/ CU1

Hi Forum
Deploy and Capture: Windows 7 x64
SCCM Primary single site server: Server 2012 R2
Version: SCCM 2012 R2 w/ CU1
Environment is Hyper-V on Windows 8.1, deploying to a Gen1 VM with a legacy adapter.
I am running into an issue whilst building a lab environment. I have built a Capture and Deploy TS (using the standard TS, ie not MDT although this is integrated) and deployed to an imported machine using the MAC address via PXE. Custom Client package has
been created and put against the TS.
The machine picks up the PXE response and boots into the SCCM WinPE environment and I choose the TS. The only currently available TS is the Build and Capture.
It runs through the TS restarting at various points as expected and then after the Client Manager package is installed it restarts and runs the TS... at this point it starts saying. "Initiating Hardware Devices.." (or something to that effect).
It does this for about 15 seconds before I get this error:
Windows PE initialization failed with error code 0x8022001B
Seen here:
I am unable to get the cmd prompt up at this point and it will restart and carry on a normal build, no TS running, meaning no capture.
If any can advise, please do.
Thanks in advance
NN

Hyper-V should work fine without any drivers injected, and you did your VM correctly.
During this error, what you see in a back ground, ConfMgr wallpaper or Windows 7 black first-run screen "preparing/first run"? I´m just thinking, is there any chance, that you have additional restart step set to boot to WinPE, instead of booting
to default OS?
Otherwise, you will need to be able to Access CMD with F8 for more troubleshooting. Make sure you have F8 command Support enabled on boot image and re-distrubute it. Or create new boot image as Peter suggested.

Problem deploying OS via PXE - SCCM 2012 R2

Unable to deploy OS via PXE. This is what I'm getting on the unknown client machine when initializing PXE:
Downloaded WDSNBP from "IP"
Architecture x64
The details below show the information relating to the PXE boot request for this computer. Please provide these details to your Windows Deployment Services Administrator so that this request can be approved.
Pending Request ID: 13
Message from Administrator: Configuration Manager is looking for policy.
Contacting Server: "IP"
TFTP Download: smsboot\x64\pxeboot.com
Press F12 for network service boot
PXE-M0F: Exiting Intel PXE ROM
Operating System not found
Here are the entries in the SMSPXE.log file when I PXE boot the client machine. It stays at "Looking for bootImage"
<![LOG[Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
]LOG]!><time="09:12:33.711+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028" file="libsmsmessaging.cpp:6346">
<![LOG[00:50:56:80:10:C0, 82760042-6D77-B44D-A365-52574A518CCB: device is not in the database.]LOG]!><time="09:12:33.711+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028"
file="database.cpp:483">
<![LOG[Getting boot action for unknown machine: item key: 2046820352]LOG]!><time="09:12:33.711+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028" file="pxehandler.cpp:231">
<![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820352" ServerName=""><Machine><ClientID>7ecc18a2-e0a0-4f63-a1e1-418366a7289f</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="DCC2000E" OfferIDTime="1/13/2014 8:11:00 AM" PkgID="DCC0001B" PackageVersion="" PackagePath="http://vmsccm001.dcci.internal/SMS_DP_SMSPKG$/DCC0001C"
BootImageID="DCC0001C" Mandatory="0"/></ClientIDReply>
]LOG]!><time="09:12:33.802+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028" file="libsmsmessaging.cpp:6544">
<![LOG[00:50:56:80:10:C0, 82760042-6D77-B44D-A365-52574A518CCB: found optional advertisement DCC2000E]LOG]!><time="09:12:33.803+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028"
file="database.cpp:483">
<![LOG[Getting boot action for unknown machine: item key: 2046820353]LOG]!><time="09:12:35.821+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028" file="pxehandler.cpp:231">
<![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820353" ServerName=""><Machine><ClientID>44fa2ff5-160c-4896-bc9b-397c10e4414b</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="DCC2000E" OfferIDTime="1/13/2014 8:11:00 AM" PkgID="DCC0001B" PackageVersion="" PackagePath="http://vmsccm001.dcci.internal/SMS_DP_SMSPKG$/DCC0001C"
BootImageID="DCC0001C" Mandatory="0"/></ClientIDReply>
]LOG]!><time="09:12:35.919+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028" file="libsmsmessaging.cpp:6544">
<![LOG[00:50:56:80:10:C0, 82760042-6D77-B44D-A365-52574A518CCB: found optional advertisement DCC2000E]LOG]!><time="09:12:35.919+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028"
file="database.cpp:483">
<![LOG[Looking for bootImage DCC0001C]LOG]!><time="09:12:35.919+360" date="01-13-2014" component="SMSPXE" context="" type="1" thread="6028" file="bootimagemgr.cpp:1774">

The TS is deployed to the All Unknown Computers group. The client machine I'm trying to install the OS is a VM with no OS currently installed so I'm assuming SCCM would see it as an Unknown Computer. How would I verify that SCCM doesn't currently
hold any data for this client?
Also, I noticed the following in the SMSPXE log: <![LOG[Client boot action reply: <ClientIDReply><Identification
Unknown="0"
Does Unknown="0" mean SCCM is not recognizing the client as being unknown?

The Deploy Software Updates Wizard completed with errors - Access is Denied

Hello, I am trying to download some updates that were synced up to the SCCM's database from another WSUS server. I am not able to get it done because the wizard fails with the access is denied error. I checked patchdownloader.log file and saw Error code
= 5 which means access denied. I tried to change permissions on the "updateservicespackages" folder within the folder, and I have full NTFS permissions for system, administrators, and read only permissions for everyone. Same thing goes for
the share permissions. My account is in the administrators group. The only way I can get it to work is by granting full permissions to "everyone", but that cannot be security friendly. Which account is "Deploy Software Updates Wizard" using
so that I can properly give it the required rights?

Hi,
You could have a look at the thread below. Lucas used ProcMon that shows an access denied with the user which he was using. Permission via group wasn't enough. Give your user full share/security access and everything works fine.
https://social.technet.microsoft.com/Forums/en-US/99859604-a803-43f3-a172-159a500fcb90/the-deploy-software-updates-wizard-completed-with-errors-access-is-denied?forum=configmgrsum
Best Regards,
Joyce

Deploy win7 via ConfigMgr12 r2 with secondary keyboard

Similar Messages

Maybe you are looking for