Deployed, and wanted contract terminated.

I called Verizon about a month ago to terminate my contract because I'm deploying, i provided all the necessary information they required to process the request, but when i checked to make sure it was I noticed they just suspended it and didn't terminate it like I asked. I tried to call customer service but we can't make toll free calls from here, so is there anyway i can get my contract terminated without having to call someone?

Verizon Wireless Adjusts Contract Policy To Accommodate Customers On Extended Military Duty
FAQ
Suspending Your Cell Phone During Deployment | Smart Military Money

Similar Messages

I am halfway through my 4s contract and wanted to buy a 5, but only see the 64 gig available to me for 649 but that requires a 2 year contract. Where can I buy w ou getting locked into a contract and for how much?

I am halfway through my 4s contract and wanted to buy a 5, but only see the 64 gig available to me for 649 but that requires a 2 year contract. Where can I buy w ou getting locked into a contract and for how much?

Your contract is with your service provider - it has nothing at all to do with Apple.
You can buy a contract free and/or unlocked iPhone from Apple and use it with whatever carrier you wish. Your contract terms with your current service provider remain in effect for your iPhone 4s though, so if you cancel with them (or port your number out, which accomplishes the same thing) you will owe them early termination fees and so forth.
Even if you pay full retail but want to use the phone with your current service provider, you are still obligated to complete the terms of your existing contract.

How to get Apple ID and password that is different to iTunes store account which I have already activated and completed contracts, tax information and bank information I want to create a Paid Books Account use apple ID

I was given this address from the Apple customer support team.
I have an active existing iTunes store account and use the same Apple ID for signing into my iTunes Connect Account that distributes Apps.
I have created some books using the iBook author and in order to distribute content on the iBookstore I have been told electronically that I need a new Apple ID and password that is different to iTunes store account which I have already activated and completed contracts, tax information and bank information valid until 2013?
I want to create a Paid Books Account using the same email address, tax information and bank information. This has been most frustrating, as I cannot get passed the sign in section and there is no contact person I can speak to. I was of the understanding the iTunes connect account and the Developer programs which I paid good money for is all what I needed to be paid for selling iBooks on the iBookstore???
I only have one email address and wish to also use it for the Paid Books Account. I have books ready to be exported and published.
I am also having trouble locating and downloading iTunes Producer. I understand I need to have the Paid Books Account active to access the iTunes Producer program. Please help.
See additional information below:
What device did you use to connect to the store? Mac computer
Which operating system is installed? Mac OS X v10.7.x
What version of iTunes is installed on your computer? iTunes 10.6
Choose the iTunes Store or App Store for your country: Other
Please select your country: Australia

Hi Lrwill,
If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
Cheers,
GB

Huge apple fan, have thousands invested in stock and products. I'm deployed and I want to know a way to play my PS3 through the thunderbolt connector to HDMI? is there any software to support this?

I would like to start off by saying, that I'm a huge apple fan, even own 8 shares. I have everytihing apple, from multiple phones, two ipads, macbook air, macbook pro, time machine, and 2 apple tv's. So, I easliy have invested enough for a reponse. But, I'm really frustrated right now because I'm deployed and I would love nothing more than to be able to play my PS3 on my macbook pro. I know that this would be easily possible if mac devoted a week to a solution. Or maybe there is already software that would allow me to use my thunderbolt connection to HDMI to connect to my PS3. I have the hardware, all I need is a program that would reconize this. This would only help there sales, so I don't understand why you can't already do this. To be able to use your screen on your macbook pro as a TV for your game consoles would be a huge to boost sales. Please tell me if this is possible and what I need to do it? Or please tell me why this is not possible?

Welcome to Apple Support Communities
What you want is Target Display mode. This mode is only supported in Late 2009 and Mid 2010 27-inch iMacs, and Mid 2011 or newer iMacs, but MacBooks Pro are not supported, so you cannot use your MacBook as a display for your PlayStation 4.
In the case of Late 2009 and Mid 2010 27-inch iMacs, there is an adapter called Kanex XD which allows you to use the iMac as a display for a Xbox 360 or PlayStation 3, but Xbox One and PlayStation 4 are not supported. In other words, you need an external monitor for your PlayStation 4.

I want to buy iPhones (4S and 5) and want to buy them in US $. But want Apple to ship them to Pakistan. I will pay the charges of shipment once told. I want to buy the iPhones in Contracts. I'll unlock them myself no problem. Is that possible? Apple ans?

I want to buy iPhones (4S and 5) and want to buy them in US $. But want Apple to ship them to Pakistan. I will pay the charges of shipment once told. I want to buy the iPhones in Contracts. I'll unlock them myself no problem. Is that possible? Apple ans?

No, you can't do what you want. Apple will only ship a US iPhone to a verified billing/shipping address in the US.

HT200241 Can Apple Configurator deploy and modify Apple TV iOS 6.0 settings? For instance, what if I wanted to submit a 'reset all settings' command, but not a 'factory restore'?

Can Apple Configurator deploy and modify Apple TV iOS 6.0 settings? For instance, what if I wanted to submit a 'reset all settings' command, but not a 'factory restore'?

Did you follow the instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.
Also some microUSB leads don't seem to work - try another if you can. Disconnect superfluous USB device/hubs too if possible.
AC

Hi, I' ll be San Antonio from 8-10th of Oct and want to buy an iphone 5. According to forums there is no unlucked yet. Thus, can i get simlocked but not contracted phone from any store? and is that possible to use that phone in Turkey without any prob.

Hi, I' ll be San Antonio from 8-10th of Oct and want to buy an iphone 5. According to forums there is no unlucked yet. Thus, can i get simlocked but not contracted phone from any store? and is that possible to use that phone in Turkey without any prob.

If you purchase the phone at the full contract price and have no term left on your carrier contract, the carrier will unlock it for you. That's what I am doing with AT&T. I'll pay the full purchase price for the phone and since I don't have a contract with them, they will unlock it for you. It can be difficult to get it done since most of their customer service is very ill informed but I have had many discussions with them on their chat that I have records of them stating they will unlock any phone if you do not have an existing contract. It's the law.

I have 4S and want to ask if it will work out of UK in pay monthly contract

HI
I have 4s and want to ask if it will work out of the UK in pay monthly contract

Only if the phone is not locked to any carrier, if it is you can only use SIM cards from the company the device is locked to. In that case consider unlocking it

HT1937 Hi, I have an iphone 4 at moment and my contract with tesco ends in Decembe, although after i ight out it stopped working, there is no water damage and its no cracked. I have charging, plugging it into my laptop but its doesnt want to come on?

Hi, i currently have an iphone 4 and my contract ends with Tesco in December. Atfer i night out my phone stopped working and now doesnt turn on ive tried everything. It has no water damage and no cracks and dont know where to take it or what to do. Thanks Charlotte

Hello Charlotte,
I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

About to have my contract terminated... please hel...

Hi there
I have receieved a letter from BT today stating that if I do not pay an outstanding balance of £190, my contract will be terminated. I understand this, but unfortunately I have no way of contacting BT to discuss it as my telephone has been cut off. I tried to call them today, but my phone will not ring out. Unfortunately I have no way of paying online as I do not have a debit card, only a basic account.
I really don't want my contract terminated, we live in a rural area and our only service providers would be BT anyway. I'm at a complete loss what to do - is there anyway of asking BT to contact me on my home number?
I would be grateful for any help.
Thanks

If you would like to try Live Chat they should be able to help you.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Error executing the Query after deploying and executing the application in WLS 6.1 SP3

Hi,
We are trying to run a application by deploying a war file on Web Logic Server
6.1 SP3. After deploying and at the time of execution of the application, the
server console displays this error message
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
[0], [], [], [], [], [], []
While debugging thru the application we found that this error comes at the time
of execution of the query thru the Statement.executeQuery method of java.sql.Statement
class.
This same application when deployed on Web Logic Server 8.1 runs perfectly, without
any hitches.
Please, provide me the solution to this asap.

Look for sometime around November. No exact date.
Eric
"Dominic Tulley" <[email protected]> wrote in message
news:[email protected]..
Thanks Eric,
you know what I'm going to ask next right?
Any ideas when SP4 comes out?
Cheers,
-Dominic
"Eric Gross" <[email protected]> wrote in message
news:[email protected]..
The next version of Apache that we will support will be 2.0.42/2.0.43
and
the module for that will be included in the next Service Pack for6.1(SP4)
and 7.0(SP2).
The problem with Apache 2 is that when a new release comes out a newmodule
needs to be compiled. Most of the time. For 2.0.42/2.0.43 this is notthe
case.
Regards,
Eric
"Dominic Tulley" <[email protected]> wrote in
message
news:3da3f246$[email protected]..
I'm trying to set this up (initially just apache in front of a single
WLS
server but ultimately I want to put it in front of a cluster).
I've installed Apache 2.0.40.
I've copied the mod_wl_20.so file into the apache modules folder.
I've edited the httpd.conf file and added the line:
LoadModule weblogic_module modules/mod_wl_20.so
When I run apache -t to check the configuration I get the following:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache
Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.sointo
server: The specified procedure could not be found.
So what's going on here?
Looking at previous postings it sounds like there's an issue with
versions
of apache after 2.0.39 but I can't find a download for that version.Also,
it sounded like the issues were for WLS 7, not 6.1. Can this work
with
2.0.40 or am I wasting my time?
If I get the mod_wl_20.so from dev2dev I get the "incompatible plugin"
message that has been mentioned in this group already.
Any suggestions appreciated,
-Dominic

How to deploy and run EJB in eclipse without XDoclet

Hi Friends
I am new in j2ee.In my academic project i want to do some ejb programming.
For that purpose i want to write some ejb's.I have written all required class for ejb,created ejb-jar.xml file manually,weblogic .xml file manually. I am using weblogic8 as an server for deployment.
I know deployment with xdoclet but i want to know hoe to deploy ejb without xdoclet.
If u have saple code or useful link regarding this please send it as soon as possible.
Thanks in advance
How to deploy and run EJB in eclipse without XDoclet

HI Welcome to J2ee...
I am also new to this...But i ll share my ideas with you...
In EJB 3.0 No need of any Deployment Descriptors....
And If you are using Eclipse You can Deploy(as jar) using Export in File tab...
XDoclet is not mandatory...
Gopal V

I have a 3g and want to upgrade.

I have a iPhone 3g 8gb and want to upgrade to a 3gs 16gb. How would I do this and how much would it cost? I heard from somebody that it cost like $600. If that is true that is ridiculous.

Recieving Picture Messages wrote:
I have a iPhone 3g 8gb and want to upgrade to a 3gs 16gb. How would I do this and how much would it cost? I heard from somebody that it cost like $600. If that is true that is ridiculous.
It would all depend on if you were on a monthly contract or if you were on Pay & Go. Pay & Go would mean you would be basically paying for the cost of the iPhone upfront, whereas with a monthly contract you will either get a BIG discount on what you need to pay for the iPhone or if you were on a more expensive monthly package/tariff you may even get the iPhone for free.
For example:
I have a iPhone 3GS which I got just over 2 weeks ago. I am on a £35 per month contract and I had to pay £180 for the iPhone, if I had got it on Pay & Go it would have cost me £580.

Crawl issue - warning: "This URL is part of a host header SharePoint deployment and the search application is not configured to crawl individual host header sites. This will be crawled as a part of ....a start address"

Hello all,
I have a multi-tenant environment in SharePoint 2010 server. Different tenants are hosted by one web app.
One content source has been created to crawl the all shared environment. (the only URL added in the content source settings = URL of the
web app)
Crawl everything under the hostname for each start address has been selected when creating this content source.
Now I have created a new tenant hosted by the same web app. For this new tenant I want to have a different crawl schedule. Simple , I just create a new content source and add the host URL of this tenant. With the same settings has the other content source.
After having started a full crawl I get 0 success and 1 warning : “This URL is part of a host header SharePoint deployment and the search application is not configured to crawl
individual host header sites. This will be crawled as a part of the host header Web application if configured as a start address.”
The first content source is well crawling the new tenant freshly created. Could you tell me where I’m wrong?
Thanks in advance
Regards
Baldo

Baldo,
In the configuration that you described you now have 2 content sources set to crawl the same content. If you have a content source with a start address of http://servername/ then it is going to crawl everything past that address. If you are now changing
the crawl schedule based on the individual site collections, you will need to move your start addresses further down the URL.
For Example:
1st Content Source:
http://servername/ as a start address would now become
http://servername/site1
http://servername/site2
2nd Content Source:
http://servername/site3
Also remember that all crawling must happen on the default zone. If you are trying to crawl a zone that the web application has been extended into, that will not work.
ScottC - Microsoft SharePoint Support

How to deploy and configure custom JAAS login module

Dear Experts,
I have created a custom jaas login module, In my .jar I am having
1. MyLoginModule.class
2. Handler.class
3. MyPrincipal.class
I want to know how to deploy the custom jaas module to oc4j. And make available to all
other application to use the same for authentication & authorization. Please suggest me.
Thanks,
Rajesh A

This article does not mention that you can put the <jazn-loginconfig> tag into the orion-application.xml as well.
Much easier to deploy and test.
--olaf

Deployed, and wanted contract terminated.

Similar Messages

Maybe you are looking for