Deployed Configuration Baseline not showing on clients

I have created 6 CI and 6 CB
each only differ by the digit they scan for in the registry.
They all check the integer of a registry value we have created on all servers.
HKLM\SYSTEM\AHS\Patching  The value is PatchWindow and the Integer is a number between 1 and 6
The compliance rules are basically Value PatchWindow=1
They are NOT set to remediate.
They have been deployed to the All Systems collection
I have used the deployment to create a Dynamic collection based on compliance.  so each server should check compliance of all 6 baselines.  Say the value is 1 dynamically assigned to DynCol1,  but next month that value is changed to 3 by request
of client and their schedule.  the daily compliance eval will catch that and then it will be assigned to DynCol3 automatically based on the query.
My problem is, when i go to ANY client i do not see the baselines under the configuration tab.  i have tried to force the client check-in using Machine Policy Retrieval & Evaluation Cycle.
What can be done to resolve the issue of not seeing the deployed baseline configurations so my servers can actually evaluate that registry setting.
Cody Fawcett

Can the servers get the other policies from MP?
Juke Chou
TechNet Community Support

Similar Messages

  • Client System Analyzer in cloud control 12c not showing successful client configuration

    Hi,
            I am trying to test this feature i found lately in our new 12.1.0.2 deployment of oracle cloud control. When i navigate to Enterprise --> Configuration --> Client System Analyzer. I click on the example link https://servername:port/em/public/ecm/csa/CSA  link. It shows that a configuration collection was successfully collected and data sent to the server. Before i continue explaining just to elaborate about we were getting that was causing file limit exceeded which i fixed by using the oracle support article 843903.1.  I then try to navigate to  Enterprise --> Configuration --> Client configurations. It shows nothing has been collected. Is there anything i am doing wrong is there any steps that i need to perform other than the start button on the "Client System Analyzer" page earlier as the documentation are not really clear about it.
    Thank you for your help in advance.
    Regards,
    Fekrat

    I tried that sql but that table does not exist what i believe you meant is this
    select job_name, status, TO_CHAR(scheduled_time,'mm/dd/yyyy HH24:mi:ss'),TO_CHAR(start_time,'mm/dd/yyyy HH24:mi:ss' ),TO_CHAR(end_time,'mm/dd/yyyy HH24:mi:ss' )  from MGMT$JOB_EXECUTION_HISTORY where job_type = 'ExecLoaderCallbacks';
    If so the following is the output:
    JOB_NAME                                                    
    STATUS                              
    TO_CHAR(SCHEDULED_T TO_CHAR(START_TIME, TO_CHAR(END_TIME,'M
    LO33_1378179753407934                                       
    Succeeded                           
    09/03/2013 07:42:33 09/03/2013 03:42:34 09/03/2013 03:42:34
    LO27_1376639476663634                                       
    Succeeded                           
    08/16/2013 11:51:17 08/16/2013 07:51:21 08/16/2013 07:51:27
    LO33_13786124337132089                                      
    Succeeded                           
    09/08/2013 07:53:54 09/08/2013 03:53:57 09/08/2013 03:53:57
    LO27_1376673272978723                                       
    Succeeded                           
    08/16/2013 21:14:34 08/16/2013 17:14:34 08/16/2013 17:14:34
    LO27_1376673265340722                                       
    Succeeded                           
    08/16/2013 21:14:26 08/16/2013 17:14:28 08/16/2013 17:14:28
    LO27_13770727997541614                                      
    Succeeded                           
    08/21/2013 12:13:21 08/21/2013 08:13:26 08/21/2013 08:13:26
    LO33_1378117698660717                                       
    Succeeded                           
    09/02/2013 14:28:19 09/02/2013 10:28:20 09/02/2013 10:28:20
    LO33_13784581794291645                                      
    Succeeded                           
    09/06/2013 13:03:00 09/06/2013 09:03:01 09/06/2013 09:03:01
    LO31_1377489274510369                                       
    Succeeded                           
    08/26/2013 07:54:37 08/26/2013 03:54:39 08/26/2013 03:54:39
    LO31_1377577050784606                                       
    Succeeded                           
    08/27/2013 08:17:35 08/27/2013 04:17:36 08/27/2013 04:17:36
    LO31_1377676276354848                                       
    Succeeded                           
    08/28/2013 11:51:22 08/28/2013 07:51:23 08/28/2013 07:51:23
    LO31_1377577042054605                                       
    Succeeded                           
    08/27/2013 08:17:26 08/27/2013 04:17:27 08/27/2013 04:17:27
    LO31_1377435582933160                                       
    Succeeded                           
    08/25/2013 16:59:45 08/25/2013 12:59:47 08/25/2013 12:59:50
    LO33_1378179745202933                                       
    Succeeded                           
    09/03/2013 07:42:25 09/03/2013 03:42:27 09/03/2013 03:42:27
    LO27_1376616934844544                                       
    Succeeded                           
    08/16/2013 05:35:35 08/16/2013 01:35:35 08/16/2013 01:35:35
    LO27_1376541682602342                                       
    Succeeded                           
    08/15/2013 08:41:23 08/15/2013 04:41:23 08/15/2013 04:41:23
    LO31_1377435595952161                                       
    Succeeded                           
    08/25/2013 16:59:58 08/25/2013 12:59:58 08/25/2013 12:59:58
    LO31_1377489266446368                                       
    Succeeded                           
    08/26/2013 07:54:29 08/26/2013 03:54:30 08/26/2013 03:54:30
    LO31_1377676267508847                                       
    Succeeded                           
    08/28/2013 11:51:13 08/28/2013 07:51:16 08/28/2013 07:51:16
    LO27_1376550603269403                                       
    Succeeded                           
    08/15/2013 11:10:03 08/15/2013 07:10:06 08/15/2013 07:10:06
    LO27_137638185761626                                        
    Succeeded                           
    08/13/2013 12:17:38 08/13/2013 08:17:38 08/13/2013 08:17:38
    LO27_1376452688482146                                       
    Succeeded                           
    08/14/2013 07:58:08 08/14/2013 03:58:09 08/14/2013 03:58:09
    LO27_1376559502205441                                       
    Succeeded                           
    08/15/2013 13:38:22 08/15/2013 09:38:26 08/15/2013 09:38:26
    LO27_137638187477127                                        
    Succeeded                           
    08/13/2013 12:17:55 08/13/2013 08:17:59 08/13/2013 08:18:00
    LO27_1376452696164147                                       
    Succeeded                           
    08/14/2013 07:58:16 08/14/2013 03:58:21 08/14/2013 03:58:26
    LO27_137638188237728                                        
    Succeeded                           
    08/13/2013 12:18:03 08/13/2013 08:18:03 08/13/2013 08:18:03
    LO27_137638193147729                                        
    Succeeded                           
    08/13/2013 12:18:52 08/13/2013 08:18:56 08/13/2013 08:18:56
    LO27_137639030867443                                        
    Succeeded                           
    08/13/2013 14:38:29 08/13/2013 10:38:29 08/13/2013 10:38:30
    LO27_1376558749646437                                       
    Succeeded                           
    08/15/2013 13:25:50 08/15/2013 09:25:52 08/15/2013 09:25:52
    LO27_1376639489381635                                       
    Succeeded                           
    08/16/2013 11:51:30 08/16/2013 07:51:33 08/16/2013 07:51:33
    LO27_1376541690283343                                       
    Succeeded                           
    08/15/2013 08:41:30 08/15/2013 04:41:30 08/15/2013 04:41:30
    LO27_13769840523511393                                      
    Succeeded                           
    08/20/2013 11:34:14 08/20/2013 07:34:16 08/20/2013 07:34:16
    LO27_1376426094291127                                       
    Succeeded                           
    08/14/2013 00:34:55 08/13/2013 20:34:56 08/13/2013 20:34:56
    LO27_1376558741936436                                       
    Succeeded                           
    08/15/2013 13:25:42 08/15/2013 09:25:42 08/15/2013 09:25:42
    LO29_1377280223716106                                       
    Succeeded                           
    08/23/2013 21:50:23 08/23/2013 17:50:23 08/23/2013 17:50:24
    LO27_1376550595608402                                       
    Succeeded                           
    08/15/2013 11:09:56 08/15/2013 07:09:56 08/15/2013 07:09:56
    LO33_1378144844469834                                       
    Succeeded                           
    09/02/2013 22:00:45 09/02/2013 18:00:49 09/02/2013 18:00:49
    LO27_137638193149230                                        
    Succeeded                           
    08/13/2013 12:18:52 08/13/2013 08:18:56 08/13/2013 08:18:56
    LO27_137638170201623                                        
    Succeeded                           
    08/13/2013 12:15:02 08/13/2013 08:15:07 08/13/2013 08:15:07
    LO27_137639123012146                                        
    Succeeded                           
    08/13/2013 14:53:50 08/13/2013 10:53:53 08/13/2013 10:53:53
    LO33_13786124427352090                                      
    Succeeded                           
    09/08/2013 07:54:03 09/08/2013 03:54:04 09/08/2013 03:54:04
    LO33_13784581884561646                                      
    Succeeded                           
    09/06/2013 13:03:09 09/06/2013 09:03:10 09/06/2013 09:03:10
    LO27_1376559502194440                                       
    Succeeded                           
    08/15/2013 13:38:22 08/15/2013 09:38:26 08/15/2013 09:38:26
    LO27_137639030071642                                        
    Succeeded                           
    08/13/2013 14:38:21 08/13/2013 10:38:21 08/13/2013 10:38:22
    LO27_137639122248845                                        
    Succeeded                           
    08/13/2013 14:53:43 08/13/2013 10:53:43 08/13/2013 10:53:43
    LO27_1376426086565126                                       
    Succeeded                           
    08/14/2013 00:34:48 08/13/2013 20:34:50 08/13/2013 20:34:50
    LO27_1376616926612543                                       
    Succeeded                           
    08/16/2013 05:35:26 08/16/2013 01:35:30 08/16/2013 01:35:30
    LO27_13769840435821392                                      
    Succeeded                           
    08/20/2013 11:34:05 08/20/2013 07:34:05 08/20/2013 07:34:05
    LO27_13770727907561613                                      
    Succeeded                           
    08/21/2013 12:13:12 08/21/2013 08:13:15 08/21/2013 08:13:15
    LO33_1378144852306835                                       
    Succeeded                           
    09/02/2013 22:00:53 09/02/2013 18:00:54 09/02/2013 18:00:54
    LO33_1378117707955718                                       
    Succeeded                           
    09/02/2013 14:28:28 09/02/2013 10:28:29 09/02/2013 10:28:29

  • Crystal report viewer do not show on client computer installation

    hi
    hope all you are fine
    i develop a simple project that show "Hello word My First Crystal Report" on crystal report viewer. after this i add new project "setup and deployment". In Setup Project I add 4 files of .msm for show crystal report.
    1. CRRuntime_13_0_tr.msm  2. Microsoft_VC100_ATL_x86.msm
    3. Microsoft_VC100_CRT_x86.msm
    4. Microsoft_VC100_MFC_x86.msm 5. Microsoft_VC100_OpenMP_x86.msm
    when i install on developer computer. it runs successfully. when i install on client computer, software runs fine but crystal report did not show and having error "METHOD NOT FOUND VOID CrystalDecision.WINDOWS.FORMS.CrystalREPORTViewer.SET_CACHEDPAGENUMBERPERDOC(INT32)"
    i install .net frame work and CRforVS_13_0_9.exe on client computer but .net frame work show form but crystal report did not show. 
    Please Help

    Hello,
    For Crystal repot related question ,please consult on SAP Crystal report forum instead of here.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • MSE 8.0.110.0 not showing any clients

    hi all,
    i just posted a reply in some other thread stating the same thing but decided to make my own topic.
    set-up:
    2x5760 running 3.6.0
    mse appliance running 8.0.110.0
    prime infra in VM running 2.2
    ap - 3702I / E
    problem:
    wireless clients not showing on the prime floor maps.
    what have done so far:
    wlc synced with mse thru nmsp - check
    wlc added to prime - check
    mse added to prime - check
    mse synced with wlc thru prime - check
    all aps positioned on the maps - check
    CAS enabled on mse - check
    NTP configured to wlc , mse and prime - check
    check time all synced
    nmsp status in mse - active
    nmsp status in wlc :
    WLC1#show nmsp status
    MSE IP Address   Tx Echo Resp  Rx Echo Req   Tx Data     Rx Data
    x.x.x.x      618           618           43878       10
    WLC1#show nmsp subscription sum
    Mobility Services Subscribed
    Server IP         Services
    x.x.x.x       RSSI, Info, Statistics, AP Monitor, Attachment, Wired Location
    WLC1#show nmsp subscription deta
    Mobility Services Subscribed by 10.29.220.9:
    Service         Subservice
    RSSI            Mobile Station, Tags, Rogue
    Info            Mobile Station, Rogue
    Statistics      Mobile Station, Tags
    Attachment      Wired Station
    Location        Subscription
    AP Monitor      Subscription
    troubleshooting done so far:
    deleted then added mse on prime then resynced to wlc
    reconfigured nmsp on wlc and resynced again with mse
    rebooted mse - no avail
    rebooted prime - no avail
    reboot wlc - not an option coz theres a lot of users =)
    tia,
    chris

    Thanks Pete, I have done that, in fact I used a useful utility to update that property on a batch of servers.
    Thanks for the thought, any additional ideas?
    Cheers
    Andrew

  • Cisco prime 2.1 not showing wired clients connected to Cisco 3850 switches

    Hello All,
    I have around 80 Cisco 3850 switches at a customer network and they are using prime infrastructure 2.1.2 to manage these devices. Most of the features are working fine except that the prime does not show the wired clients connected to the switches. The wireless clients are shown properly but not the wired clients. Their core switches are nexus 7k. The SNMP configuration on the switches is as follows.
    snmp-server group xxxx  v3 priv write xxxx-VIEW-WR
    snmp-server view xxx-VIEW-WR mib-2 included
    snmp-server trap-source Vlan100
    snmp-server host x.x.x.x version 3 priv testuser
    Please help me to resolve this issue.
    Shabeeb

    I managed to get the end hosts connected in 3850 switches with the use of snmp context command. But now the issue is that prime is showing only the mac address of the device , not the IP address. 
    Is there anyway to resolve this issue?

  • WRT54G v6 client table not showing wired clients

    I have a WRT54G v6 using the lastest firmware.  Is there any 3rd party software that can display what clients I have on my network?  The reason I'm asking is because my router will only show the wireless clients and not the ones connected on the wired side.  Other than that everything works fine.

    I have similar problem. DHCP client table shows only wireless laptops using dynamic ip address. All my wired destop (dynamic ip), and other static ip devices both wired or wireless do not show up in DHCP client table. Any idea? I have v8.

  • Scout not show all client

    Hi,
    I'm trying to use the customizing scout .
    I start the customizing scout (SCOUT T.code), selecting "Entire System Landscape" and marking all system roles
    It show only Clients 000, 001& 066,is only showing.
    Plz give hint to show all client.
    Rg,
    Karthik

    HI Rajeev,
       In SMSY shows all client,also i generate the RFC  for the same.
    Regards,
    Karthik

  • NetBoot images not showing on clients

    I have two Mavericks (10.9.4) servers from which I am trying to netboot to use DeployStudio to deploy Fall semester images. None of the clients see the images offered by either server either from the Startup Disk pref pane or by holding option or N at startup.
    I have been creating netboot images in different ways and with different tools for the past few days and the clients can't see any of them. This morning I configured the second server from scratch, thinking it might be corruption in the first server. No joy. Example lines from the server logs are below. As long as the pref pane is running on the client or once the client tries to neboot the following two lines replicate every three or four seconds in the server log:
    Aug 13 09:43:32 SOA-Deployer.local bootpd[8633]: BSDP INFORM [en0] 1,68:5b:35:d5:61:d7 arch=i386 sysid=iMac14,3 Aug 13 09:43:32 SOA-Deployer.local bootpd[8633]: NetBoot: [1,68:5b:35:d5:61:d7] BSDP ACK[LIST] sent 134.139.109.248 pktsize 329
    It never gets to the BSDP SELECT step. I've tried different clients, models, and locations of servers and clients (all on the same VLAN). I have tried building the .nbi with Deploystudio (v 1.6.11) on a new iMac running Mavericks 10.9.4, and on one of the servers using System Image Utility. I have also tried creating and serving them using both HTTP and NFS. I've talked to the network guys and they confirm that I should be able to do this. In addition, a deployment server from three years ago and some of its clients the same age CAN netboot.
    Here is the result of running sudo serveradmin fullstatus netboot on one of the servers:
    netboot:state = "RUNNING"
    netboot:stateTFTP = "RUNNING"
    netboot:readWriteSettingsVersion = 1
    netboot:netBootConnectionsArray = _empty_array
    netboot:logPaths:netBootLog = "/var/log/system.log"
    netboot:dhcpLeasesArray = _empty_array
    netboot:stateDHCP = "RUNNING"
    netboot:stateHTTP = "RUNNING"
    netboot:serviceCanStart = 1
    netboot:timeOfSnapshot = "2014-08-13 18:16:16 +0000"
    netboot:stateNFS = "RUNNING"
    netboot:stateImageArray:_array_index:0:_array_index:0 = 0
    netboot:stateImageArray:_array_index:0:_array_index:1 = 0
    netboot:stateImageArray:_array_index:0:_array_index:2 = 0
    netboot:stateImageArray:_array_index:0:_array_index:3 = 0
    netboot:stateImageArray:_array_index:0:_array_index:4 = 1
    netboot:stateImageArray:_array_index:1:_array_index:0 = 1
    netboot:stateImageArray:_array_index:1:_array_index:1 = 1
    netboot:stateImageArray:_array_index:1:_array_index:2 = 0
    netboot:stateImageArray:_array_index:1:_array_index:3 = 1
    netboot:stateImageArray:_array_index:1:_array_index:4 = 1
    netboot:stateImageArray:_array_index:2:_array_index:0 = 1
    netboot:stateImageArray:_array_index:2:_array_index:1 = 0
    netboot:stateImageArray:_array_index:2:_array_index:2 = 1
    netboot:stateImageArray:_array_index:2:_array_index:3 = 0
    netboot:stateImageArray:_array_index:2:_array_index:4 = 1
    netboot:stateImageArray:_array_index:3:_array_index:0 = 0
    netboot:stateImageArray:_array_index:3:_array_index:1 = 0
    netboot:stateImageArray:_array_index:3:_array_index:2 = 0
    netboot:stateImageArray:_array_index:3:_array_index:3 = 0
    netboot:stateImageArray:_array_index:3:_array_index:4 = 1
    netboot:servicePortsRestrictionInfo = _empty_array
    netboot:netBootClientsArray = _empty_array
    netboot:servicePortsAreRestricted = "NO"
    netboot:setStateVersion = 1
    netboot:startedTime = "2014-08-13 18:08:21 +0000"
    netboot:stateAFP = "RUNNING"
    I have seen many solutions on the web. One suggested a problem with a kernelcache file larger than 32MB. That isn't the problem here, since none of mine are larger than 16MB.
    Anyone have any ideas? I'm just about out...

    Thanks for the reply, Strontium90. I am indeed inside a university network as described, but I don't see how I can use a LAN vs VLAN. In order to manage my department's devices the ports in our buildings are assigned an ip address range within two subnets, one of which I am working with both clients and servers at the moment. Not being a network geek I can't see how I can change that. Where can I learn more about coping with Mavericks' standards in this regard? Is there a way around it?
    The running DHCP shouldn't have been. In the older Mac OS Server versions we had to turn DHCP on but leave it inert when using netboot. I was grasping at straws and turned on the service then forgot to turn it back off before running that report.
    I did not truncate the output. There have been no clients. They can't even see the netboot images thus none have booted.
    In case it helps here is the report from sudo serveradmin settings netboot, minus most of the supported models (my Macs are all in the list). :
    /var/db/bsdpd_clients: No such file or directory
    netboot:netBootFiltersRecordsArray = _empty_array
    netboot:netBootStorageRecordsArray:_array_index:0:sharepoint = yes
    netboot:netBootStorageRecordsArray:_array_index:0:clients = no
    netboot:netBootStorageRecordsArray:_array_index:0:volType = "hfs"
    netboot:netBootStorageRecordsArray:_array_index:0:okToDeleteSharepoint = no
    netboot:netBootStorageRecordsArray:_array_index:0:readOnlyShare = no
    netboot:netBootStorageRecordsArray:_array_index:0:path = "/"
    netboot:netBootStorageRecordsArray:_array_index:0:okToDeleteClients = yes
    netboot:netBootStorageRecordsArray:_array_index:0:volName = "Macintosh HD"
    netboot:netBootPortsRecordsArray:_array_index:0:deviceAtIndex = "en0"
    netboot:netBootPortsRecordsArray:_array_index:0:isEnabledAtIndex = yes
    netboot:netBootPortsRecordsArray:_array_index:0:nameAtIndex = "Ethernet"
    netboot:logging_level = "HIGH"
    netboot:filterEnabled = no
    netboot:netBootImagesRecordsArray:_array_index:0:BootFile = "booter"
    netboot:netBootImagesRecordsArray:_array_index:0:EnabledMACAddresses = _empty_array
    netboot:netBootImagesRecordsArray:_array_index:0:osVersion = "10.9"
    netboot:netBootImagesRecordsArray:_array_index:0:RootPath = "NetInstall.dmg"
    netboot:netBootImagesRecordsArray:_array_index:0:IsDefault = no
    netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_arra y_index:0 = "MacBookPro4,1"
    netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_arra y_index:1 = "Macmini5,3"
    netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_arra y_index:2 = "Macmini5,2"
    netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_arra y_index:3 = "Macmini5,1"
    netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_arra y_index:4 = "iMac10,1"
    netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_arra y_index:5 = "MacPro4,1"
    netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_arra y_index:6 = "MacBookPro5,2"
    netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_arra y_index:7 = "iMac8,1"
    netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_arra y_index:8 = "MacBookPro5,4"
    netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_arra y_index:9 = "MacBookAir4,2"
    netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_arra y_index:10 = "iMac11,1"
      >snip<
    netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_arra y_index:62 = "MacBookPro11,2"
    netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_arra y_index:63 = "MacBookPro11,3"
    netboot:netBootImagesRecordsArray:_array_index:0:Kind = "2"
    netboot:netBootImagesRecordsArray:_array_index:0:Index = 1094
    netboot:netBootImagesRecordsArray:_array_index:0:EnabledSystemIdentifiers = _empty_array
    netboot:netBootImagesRecordsArray:_array_index:0:Name = "DSR-1094"
    netboot:netBootImagesRecordsArray:_array_index:0:Type = "HTTP"
    netboot:netBootImagesRecordsArray:_array_index:0:Language = "en"
    netboot:netBootImagesRecordsArray:_array_index:0:DisabledMACAddresses = _empty_array
    netboot:netBootImagesRecordsArray:_array_index:0:Description = "DSR-1094"
    netboot:netBootImagesRecordsArray:_array_index:0:BackwardCompatible = no
    netboot:netBootImagesRecordsArray:_array_index:0:IsEnabled = yes
    netboot:netBootImagesRecordsArray:_array_index:0:IsInstall = yes
    netboot:netBootImagesRecordsArray:_array_index:0:Architectures = "4"
    netboot:netBootImagesRecordsArray:_array_index:0:SupportsDiskless = no
    netboot:netBootImagesRecordsArray:_array_index:0:pathToImage = "/Library/NetBoot/NetBootSP0/DSR-1094.nbi/NBImageInfo.plist"
    netboot:netBootImagesRecordsArray:_array_index:0:imageType = "netinstall"
    netboot:netBootImagesRecordsArray:_array_index:1:BootFile = "booter"
    netboot:netBootImagesRecordsArray:_array_index:1:EnabledMACAddresses = _empty_array
    netboot:netBootImagesRecordsArray:_array_index:1:osVersion = "10.9"
    netboot:netBootImagesRecordsArray:_array_index:1:RootPath = "NetInstall.dmg"
    netboot:netBootImagesRecordsArray:_array_index:1:IsDefault = no
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:0 = "MacBookPro4,1"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:1 = "Macmini5,3"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:2 = "Macmini5,2"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:3 = "Macmini5,1"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:4 = "iMac10,1"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:5 = "MacPro4,1"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:6 = "MacBookPro5,2"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:7 = "iMac8,1"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:8 = "MacBookPro5,4"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:9 = "MacBookAir4,2"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:10 = "iMac11,1"
      >snip<
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:59 = "iMac14,1"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:60 = "iMac14,2"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:61 = "MacBookPro11,1"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:62 = "MacBookPro11,2"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledSystemIdentifiers:_arra y_index:63 = "MacBookPro11,3"
    netboot:netBootImagesRecordsArray:_array_index:1:Kind = "2"
    netboot:netBootImagesRecordsArray:_array_index:1:Index = 3094
    netboot:netBootImagesRecordsArray:_array_index:1:EnabledSystemIdentifiers = _empty_array
    netboot:netBootImagesRecordsArray:_array_index:1:Name = "DSR-NFS-1094"
    netboot:netBootImagesRecordsArray:_array_index:1:Type = "NFS"
    netboot:netBootImagesRecordsArray:_array_index:1:Language = "en"
    netboot:netBootImagesRecordsArray:_array_index:1:DisabledMACAddresses = _empty_array
    netboot:netBootImagesRecordsArray:_array_index:1:Description = "DSR-NFS-1094"
    netboot:netBootImagesRecordsArray:_array_index:1:BackwardCompatible = no
    netboot:netBootImagesRecordsArray:_array_index:1:IsEnabled = yes
    netboot:netBootImagesRecordsArray:_array_index:1:IsInstall = yes
    netboot:netBootImagesRecordsArray:_array_index:1:Architectures = "4"
    netboot:netBootImagesRecordsArray:_array_index:1:SupportsDiskless = no
    netboot:netBootImagesRecordsArray:_array_index:1:pathToImage = "/Library/NetBoot/NetBootSP0/DSR-NFS-1094.nbi/NBImageInfo.plist"
    netboot:netBootImagesRecordsArray:_array_index:1:imageType = "netinstall"
    netboot:netBootImagesRecordsArray:_array_index:2:BootFile = "booter"
    netboot:netBootImagesRecordsArray:_array_index:2:EnabledMACAddresses = _empty_array
    netboot:netBootImagesRecordsArray:_array_index:2:osVersion = "10.9"
    netboot:netBootImagesRecordsArray:_array_index:2:RootPath = "NetBoot.dmg"
    netboot:netBootImagesRecordsArray:_array_index:2:IsDefault = yes
    netboot:netBootImagesRecordsArray:_array_index:2:DisabledSystemIdentifiers:_arra y_index:0 = "iMac10,1"
    netboot:netBootImagesRecordsArray:_array_index:2:DisabledSystemIdentifiers:_arra y_index:1 = "iMac11,1"
    netboot:netBootImagesRecordsArray:_array_index:2:DisabledSystemIdentifiers:_arra y_index:2 = "iMac11,2"
    netboot:netBootImagesRecordsArray:_array_index:2:DisabledSystemIdentifiers:_arra y_index:3 = "iMac11,3"
    netboot:netBootImagesRecordsArray:_array_index:2:DisabledSystemIdentifiers:_arra y_index:4 = "iMac12,1"
    netboot:netBootImagesRecordsArray:_array_index:2:DisabledSystemIdentifiers:_arra y_index:5 = "iMac12,2"
      >snip<
    netboot:netBootImagesRecordsArray:_array_index:2:DisabledSystemIdentifiers:_arra y_index:60 = "MacPro6,1"
    netboot:netBootImagesRecordsArray:_array_index:2:DisabledSystemIdentifiers:_arra y_index:61 = "Xserve3,1"
    netboot:netBootImagesRecordsArray:_array_index:2:Kind = "1"
    netboot:netBootImagesRecordsArray:_array_index:2:Index = 3011
    netboot:netBootImagesRecordsArray:_array_index:2:EnabledSystemIdentifiers = _empty_array
    netboot:netBootImagesRecordsArray:_array_index:2:Name = "NetBoot of Install OS X Mavericks"
    netboot:netBootImagesRecordsArray:_array_index:2:Type = "HTTP"
    netboot:netBootImagesRecordsArray:_array_index:2:Language = "Default"
    netboot:netBootImagesRecordsArray:_array_index:2:DisabledMACAddresses = _empty_array
    netboot:netBootImagesRecordsArray:_array_index:2:Description = "NetBoot of OS X 10.9.4 (13E28) Install (7.18 GB)."
    netboot:netBootImagesRecordsArray:_array_index:2:BackwardCompatible = no
    netboot:netBootImagesRecordsArray:_array_index:2:IsEnabled = yes
    netboot:netBootImagesRecordsArray:_array_index:2:IsInstall = no
    netboot:netBootImagesRecordsArray:_array_index:2:Architectures = "4"
    netboot:netBootImagesRecordsArray:_array_index:2:SupportsDiskless = yes
    netboot:netBootImagesRecordsArray:_array_index:2:pathToImage = "/Library/NetBoot/NetBootSP0/Mavericks.nbi/NBImageInfo.plist"
    netboot:netBootImagesRecordsArray:_array_index:2:imageType = "netboot"
    netboot:afpUsersMax = "50"

  • Application Configuration changes not showing in Portal

    Hello Guru's,
    We are on EP 7.02 and EhP6 on backend.
    We are using WDA based ESS Applications.
    We have a requirement to hide Directory and Index tabs on ESS Homepage .
    So followed the below steps to do the same:
    1. SE80 - FPM_OVP_COMPONENT
    2. Application  HRESS_A_MENU - Application Configuration ZHRESS
    3. Start Configurator - and click on Component Configuration to hide the tabs.
    4. Done with the changes and modified Overview page in Portal to have the new Aplication Configuration.
    The issue is, for me it is working fine, it is hiding the tabs and showing only the Map. But for other users it is showing all the tabs Map, Directory, and Index.
    Please help. And also when a user does personalization in Portal where do the changes  go ?
    Thanks,
    Pramod

    Hi Pramod,
                     How were you able to solve this issue. I am having the same problem. I did the Z copy for all the standard configuration and assigned the custom role ZESS to ZHRESS_CC_MENU_AREA_GROUP. When i change the the options in general settings to invisible for MAP and Index , I can see the tabs getting hidden in the preview mode.In portal the changes are not getting reflected. You said about enhancement. Could you please explain what you did ? . Your help is greatly appreciated.
    Thanks,
    Vishnu

  • Datasource not showing new client in the dataflow after migration.

    Hi Experts,
    We have connected our BI DEV system to new ECC DEV Client 203. Earlier the connection was with 201 CLNT. We have replicated and activated the datasources from the new system to BI. At RSA1, all the datasources are now showing CLNT 203 but some of them are still showing CLNT 201 at the dataflow (at the infoprovider). I have executed BDLS several times but still facing the same problem.
    Kindly suggest the solution.
    Edited by: prateekj on Oct 21, 2009 4:40 PM
    Edited by: prateekj on Oct 21, 2009 4:41 PM

    OK
    Go throught this note
    Note 325470 - Activities after client copy in BW source systems
    hope your problem will be sloved
    and also check the simillar link which can support your issue
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/bdls-597594
    santosh
    Edited by: Santhosh Nagaraj on Oct 21, 2009 8:29 PM

  • Clinet deployment success reports not showing any results

    Hi,
    We have successfully migrated from SCCM2007 to SCCM 2012 R2 and we currently have 1600 machines where the client has installed successfully and the Client status reflects this in the console.
    However, when I attempt to run the Client Deployment success report no clients are displayed in the report.
    The migration took place just over 2 weeks ago and during that time there have been 20 clients that have become inactive. Running this report returns the 20 machines that are inactive.
    Does anyone have any idea why there are no results returned?
    Regards Gunther

    Hi,
    You could check Wally's reply in the thread below.
    Quote:
    As long as you've told the client deployment to use the fallback status point (FSP=servername), then the client will generate state messages and send to the FSP as they are created. By default, a FSP batches those messages, and every hour sends them to the
    site server. Then the site server processes them into the database, where they are then available in reports.
    Reference: Client deployment success report inaccuracies
    https://social.technet.microsoft.com/Forums/en-US/89390386-e0ee-4f9e-b62b-0db22e8c3ebe/client-deployment-success-report-inaccuracies?forum=configmgrgeneral
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Configuration tab not showing any fields - in BSPWD_CMP_WD tcode

    Hi I am on crm 7.0.
    when i go into tcode : bsp_wd_cmpwd tcode, and go to any standard/custom component, and go to any view, and click on configuration tab, i am not able to see the fields. The complete tab has blank white screen.
    Normally we would be seeing the fields( if not then atelast default screen, where i can go and copy/edit/choose and do my modifications)
    when i click edit/copy/choose/new configuratoin buttons too, nothing is getting displayed..
    is anything wrong? how can i work on configuratoin tab? pls help.
    for example i checked component : BT115S_SLSO components all views..
    thanks
    Niraja

    I am getting this message after some time.. in the configuratoin tab..
    This program cannot display the webpage
       Most likely causes:
    You are not connected to the Internet.
    The website is encountering problems.
    There might be a typing error in the address.
       What you can try:
         Check your Internet connection. Try visiting another website to make sure you are connected. 
         Retype the address. 
         Go back to the previous page.
         More information
    This problem can be caused by a variety of issues, including:
    Internet connectivity has been lost.
    The website is temporarily unavailable.
    The Domain Name Server (DNS) is not reachable.
    The Domain Name Server (DNS) does not have a listing for the website's domain.
    what does this mean, do i need to enter the hostname somewhere? please help...

  • Credit payment not showing in client

    I have just added $4.99 to my account for the first time, however it is saying that I have $0. I have just checked my bank statement and there is $9.98 charge pending from Skype. How do I fix this?
    Solved!
    Go to Solution.

    Thanks for your reports. We are looking into this right now.
    What you can do right now:
    You can verify your actual Skype credit amount any time via the Skype web account page at www.skype.com/go/myaccount - The amount shown on that page is always accurate even if it's not reflected in your Skype client right now.
    If the Skype credit balance in you Skype client isn't updating try placing a paid call to trigger the update. No need for the call to be picked up, just let it ring twice.
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Server Not Showing on Client Desktop - afp

    I've been having trouble lately with logging into my home iMac from my MacBook via the internet (Go->Connect to Server (afp://server DNS url)). It worked just fine until a couple of weeks ago, and now when the connection is made by choosing my account name in the "Select volumes to mount" pane, my iMac account doesn't mount in the MB Finder sidebar. My account name is greyed out in the "Select volumes to mount" pane if I attempt to connect again, so there's an open afp session somewhere that I can neither locate or kill. If I try to connect to the Public Folder in my iMac account, it mounts right up in the MB sidebar and I can disconnect it using the little triangle eject button. I have no idea where to start to resolve this - I've restarted my router a few times since this started and that hasn't made any difference. Also checked both computers' network settings, but the fact that I can connect to another account tells me they aren't the problem.

    Dear Friend ,
    For Your Issue . First You Delete the %Temp% Data in the Client System . After you have Delete the Local Registration Folder and Clear the Data from SARi Table. then You Reinstall the Add on . It will install the Client System .
    Thanks

  • Deployed web service not showing in WSDL Settings

    Hi
    I created a partner link and while giving the WSDL file path as
    http://jdpdap02.dubaiworld.ae:7783/MailApplication-SendMailProject-context-root/MailWebServiceSoapHttpPort?WSDL
    It is creating a copy on my local project.
    Why is it making a local copy?
    Moreover why i cant see this WSDL file in my Partner service link explorer?
    Pls guide
    Deepak

    BPEL by default makes a copy of the wsdl locally to your bpel-project.
    This wsdl will get used for designtime (so for assign etc).
    After deploying on runtime it will used the url of the deployedservice.
    After refreshing or restart of jdeveloper you still don't see it?
    If you create an invoke..can you select the wsdl of the partnerlink ?

Maybe you are looking for