Deployed PAR file webservices are not displayed in SOAP admin

Hi,
we were facing the problem with customized PAR file deployment and
associated webservices.We have deployed the the PAR file on two
different versions of EP as given below.
EP6.0(WAS620)-SP2(J2EE and Portal versions are identical)
EP6.0(WAS640)-SP13(J2EE and Portal versions are identical)
The problem was the webservices has been shown in the case of
EP6.0(WAS620)-SP2 under SOAP Administration and not shown in case
of EP6.0(WAS640)-SP13.Is there any specific version made PAR files are
required for each of above portal versions or any other way to
check the webservcies in EP6.0(SP13).
Kindly help us to resolve this issue.

Hi Swetha ,
in Bypass scenario if you are fetching a flat file from source to target some time you are not able to view the file in payload .However it does not make any difference as you are simply tunnling the file not doing any transformation with it .
If it is a flat file in sender CC just make 1 .file type as bin or 2 . file type as text and encoding as UTF-8 and then check you can view the file content or not .check with both bin and text ( one by one ) .might be you will able to view payload in MONI with any one of that setting in sender CC .
Regards,
Saurabh

Similar Messages

Deploy WAR file - Servlets are not loaded

Hi,
I deploy a WAR file through a Application server console. The Deployement was successful. I restart the oc4j and http servers. After that i check the status, The servlets are NOT LOADED. Pls anybody provide a solutions.
Thanks!

Did you ever call them? Only then they're loaded - assuming you are looking at the status, using OEM

Dreamweaver file icons are not displaying correctly.

Hi,
I recently uninstalled a trial copy of the Creative Suite CS4 Master Collection and then purchased the Design Premium bundle.
My icons are now all differnet. For example, .asp files display with the "text" document icon.
Is there a way (either mnaually or with a utility) to reset all of the icons to there proper state?
I am running Vista Ultimate.
Thanks.

Open Notepad.
Copy this text into a new document:
c:\windows\system32\cleanmgr.exe /dc /sageset: 1
c:
cd \
cd c:\windows\prefetch
del *.* /q
Save to your desktop as "clean.bat" ( a Windows Batch File)
Double click it. It will open the disk cleanup tool.
You'll notice a whole bunch of other stuff listed that doesn't show up when you normally run the disk cleanup.
Check EVERYTHING. (Don't worry, if these were important files, Windows wouldn't list them as cleanable to save space.)
Close the disk cleanup.
Right click the clean.bat file and choose Edit.
In the first line where it says sageset:, change it to sagerun: then save and close the file.
Double click it again and will run a thorough cleanup of your C:/ drive, including some windows cache files that hold icon preferences for file types.
Reboot when it finishes and see if the icons aren't set right.

Some PDF files are not displayed in Bridge

Hello,
here is the problem: I use Adobe Bridge CS2 to browse my large collection of PDF files, and unfortunately some files are not displayed in the Filmstrip View mode; instead a generic icon is shown (bridge1.png). Most PDF files, however, are displayed correctly (bridge2.png). Is this the problem of Bridge or of certain PDF files, and how should I fix them to make them being displayed by Bridge?
Thanks.

curt y
In fact, all files have similar type of content (research papers). However, I found out that all files which are not displayed are "protected" by the publisher such that they only can be viewed and printed, but not modified or disassembled. Apparently, this causes the problem with Bridge not displaying them. It's a pity that Bridge cannot handle them...
Thanks for the help, though.

Downloads are not displayed in window. I did change then change back destination folder.

A window opens when files are downloaded but the file(s) are not displayed. They used to be

See Tools > Options > Privacy > History: "Remember download history"
To see all the History and Cookie settings, select: Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"

Icons in the SmartBar are not displayed

Hi all,
I have a peculiar problem. I'm using Forms 6i with Oracle 9i RDBMS. I have created menu and set the property 'Visible in Vertical Toolbar' to True and also set the property 'Icon Name' to "new_save".
Through browser when I am invoking the form, I'm getting very small placeholders, but not the icons.
Please help me in this regard.
Thanks
Sunil Kumar G S

Thank you so much for your response. Please also clarify following points:
* When we are working on Developer Forms 6i in Client/Server Environment, I have already created UI_ICON registry entry. When I'm using .ICO files, my icons are getting shown in SmartBar. But, If I am using .GIF files, Icons are not displayed. Does it mean, on Win98, only ICO files can be used?
* When we are working on Developer Forms 6i in 3 tier architecture (Linux, Oracle 9iAS), we still have the problem and not able to see the SmartBar Icons. Can anyone help me in step-by-step manner what to do and what are the checks we should ensure to have it succeed.
Thanking you,
Sunil Kumar G S

In Mac OS X Yosemite, Finder / Favorites / All My Files, "Today" files are not displayed.

After upgrading MacBook Pro to OS X Yosemite, "Today" files are not displayed in Finder / Favorites / All My Files. It worked prior to the upgrade.

After further investigation, it is not the displaying of "Today" files that is the issue. It appears that Finder / Favorites / All My Files is not correctly finding & displaying files when using the View / Arrange By / Date Last Opened criteria. If I switch the criteria to / Date Modified, it finds & displays the file correctly. See attached screen shots. (It is possible that this problem existed before Yosemite, as I don't recall which criteria Finder was using before the upgrade.)

PDF files are not displayed. Why?

Most of the PDF files I uploaded are not displayed on Creative Cloud. Some I can view page by page, but most are only displayed as generic PDF icon.They are not very complex or difficult files - What is the problem? My InDesign files are displayed nicely. Even GMail displays the PDF files without a problem.
Any suggestions?

Hi,
The problem I have with displaying PDF files is still the same: as soon as they are locked against editing (NOT password protected against opening) files cannot be viewed on Creative Cloud.
I just downloaded one of the files to my computer and e-mailed it to myself: GMail can view it without any problem. It's a bit strange that Google can do something Creative Cloud can't.
And its REALLY annoying that some PDF files just can't be viewed in Creative Cloud
Thanks for your help!

Deployed par file does not show as an iview create option

Hello Experts,
I modified the com.sap.portal.runtime.masthead par app and deployed it to the portal as myCustomMasthead.
I see the par file in under the Support Workset in the portal, but when I'm in content admin and try to create an iview from the deployed par file template, the option for the deployed par does not show? Do I need to request basis to bounce the J2ee engine? What might be wrong?
Any advice will be appreciated.
Regards,
MM

Hi Nishant,
Yes the file exists under ROOT/WEB-INF/portal/portalapps.
And I am not using iview from template option, I am using iview from par file option.
I did not deploy the par file from NWDS, I created the par file in NWDS and then manually deployed the par file using the par uploader tool in the portal.
Do I need to do anything in the portalapp.xml file? This is what my portalapp.xml file looks like:
<application>
<application-config>
    <property name="ClassLoadingPolicy" value="5.0"/>
    <property name="DeploymentPolicy" value="5.0"/>
    <property name="AuthenticationPolicy" value="5.0"/>
</application-config>
<components/>
<services/>
</application>
Then there is also another portalapp.xml in the dist folder that has all this SAP stuff inside it. The top line says not to modify the file.
I bounced the J2EE Engine but it didnt fix the issue.
MM

Elements Organizer 8 - some WMV are not displayed properly in the Play Video but are in Play Vide

Hello:
Elements Organizer - some WMV are not displayed properly in the Play Video but are in Play Vide on Full screen. What's the problem? Wrong codec?

Because WMV's can contain a lot of flags, like DRM, they can exhibit odd behavior, indeed.
Usually, AV files will display in their native resolution, i.e. in their set Frame Size/Aspect Ratio and with their set PAR (Pixel Aspect Ratio), but sometimes those flags are missed, or are altered by other programs.
Remember, WMV's are designed to be streaming delivery-only, and are not intended, or designed to be edited. Most NLE's (Non Linear Editors) will allow them to be edited, but will require extra processing to do so. As is mentioned, WMM is designed around editing that delivery-only format, but most others are not.
There are many other formats/CODEC's, that ARE designed to be edited by the vast majority of NLE's, such as DV-AVI Type II's.
The best workflow is to NOT bring WMV's into the mix, unless one is using WMM exclusively. Converting those to an easily editable format/CODEC will always be the best course of action.
Good luck,
Hunt

Report deployed to new server does not display static image

Hi,
We have several web sites on a server running Windows Server 2008 R2 Standard, SP1, 64-bit. It has installed .NET Framework 4 Client Profile and Extended, ver. 4.0.30319 (according to Control Panel->Programs, as well as c:\Windows\Microsoft.NET\Framework). Two of the sites use many Crystal Reports, most of which include a static image as a logo. This image is embedded in each report; there is no stand-alone image file that gets deployed.
Recently, we migrated to a new server, running the same version of Windows & .NET Framework. As near as we can tell, the 2 servers are nearly identical, as far as configuration and permissions, etc. One notable exception is the DefaultAppPool, which is Classic on the original server and Integrated on the new. (When I changed the new server to Classic, the apps failed to run properly.) The other exception is the old server is on a stand-alone box, while the new server is a virtual machine.
For one of the apps on the new server, the embedded logo images are not displaying on the page. Instead, there is a little red X with the word "Image". For the other app on the new server, the reports display fine. Furthermore, if I copy one of the "broken" rpt files from the "broken" app to the "good" app, the report displays correctly! And of course, the same file displays correctly in all circumstances on the old server.
This suggests to me that there is not a problem with the report file, per se', but rather with the environment to which it is deployed. Permissions? If so, where?
Any suggestions would be much appreciated.
Thanks.
--d

The search string 'crystal red x net' (search box in top right corner) should return a number of KBAs, docs, blogs, etc. See if any of those help.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Different ways to deploye .par file

Hi,
How many ways we have to deploy .par file. As per my knowledge folloing are the ways
1. Deploying from NWDS
2. Portal -> Java Developer -> Portal Deployment
Is there any other way to deploy the par file like we can deploy .ear files from SDM.
We would like to remove PDK. So, the Java Developer role will be deleted.
Please let me know if we have any other ways to deploy
Thanks

Hi Bobby,
This is another way for PAR deploy
System Administration -- Support -- Portal Runtime -- Administration Console
Apart from that you check these links out :
Converting .EAR file to .SDA
Also for intro..,
http://help.sap.com/saphelp_nw04/helpdata/en/2d/b8b2426dbec86ae10000000a155106/frameset.htm
SAP Note: 696084 (For Multiple PAR deployment)
Regards,

Umlauts are not displayed correctly in different programs

Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)

Did you check the locale settings on your Windows machine?

Deploy par file error using NWDS

Hi
I developed a portal service for activity report. After i deploy the service i get an Java Iview Runtime error in portal and our portal is down. I found the error which is a null reference in portal service i wrote.I fixed the problem, but i can't deploy par file using neither NWDS. Is there any other ways to deploy the par file. Please help.
Thanks
Edited by: Ozkan Onay on Jan 31, 2008 8:11 PM
Edited by: Ozkan Onay on Jan 31, 2008 8:16 PM

Hi,
To deploy the application, you can without NWDS but not without server running. Server should be up for deploying any application. Go to Drive:\usr\sap\J2E\JCXX\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
and ..\deployment\temp folders. Delete your project. It will be cleaned from the portal. Now restart the server. It will be up.
Regards,
Harini S

Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?

Hi,
   I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
      CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
    METHODS:
      display IMPORTING l_table TYPE string
                         l_fcat   TYPE string.
ENDCLASS.                    "lcl_report DEFINITION
      CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
    DATA: gr_table   TYPE REF TO cl_salv_table.
    DATA: gr_columns TYPE REF TO cl_salv_columns_table,
          gr_column TYPE REF TO cl_salv_column_table,
          ls_fcat    TYPE slis_fieldcat_alv.
    DATA: gr_display TYPE REF TO cl_salv_display_settings.
    DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
          l_field    TYPE string.
    FIELD-SYMBOLS : <fs_table>    TYPE STANDARD TABLE,
                    <ft_fcat>     TYPE STANDARD TABLE.
Get the ALV object refering to the output table
    ASSIGN (l_table) TO <fs_table>.
    ASSIGN (l_fcat) TO <ft_fcat>.
    TRY.
        cl_salv_table=>factory(
          IMPORTING
            r_salv_table = gr_table
          CHANGING
            t_table      = <fs_table> ).
      CATCH cx_salv_msg.                                "#EC NO_HANDLER
    ENDTRY.
Add basic default functionality in the ALV report
Functions
    l_o_functions = gr_table->get_functions( ).
    l_o_functions->set_all( abap_true ).
    gr_columns = gr_table->get_columns( ).
    gr_columns->set_headers_visible( abap_true ).
Display the list
    gr_table->display( ).
ENDMETHOD.                    "extract
ENDCLASS.                    "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
    get_storecodes    USING      p_stfile
                      CHANGING   it_t001w,
fetching mard data
    read_mard_data,
preparing fieldcatalog for Final Data
    create_filedcat   USING      it_t001w
                                 it_site
                      CHANGING   it_fieldcat,
preparing structure & internal table for Final Data
    create_final_table_structure USING it_fieldcat,
prepare output data
    prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
    display_data    USING l_table
                          l_fcat.
*&      Form get_storecodes
FORM get_storecodes USING    p_p_stfile
                     CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw    TYPE truxs_t_text_data,
rs_site   LIKE LINE OF rt_site,
l_index   LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w>   LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      i_line_header        = 'X'
      i_tab_raw_data       = lt_raw
      i_filename           = p_p_stfile
    TABLES
      i_tab_converted_data = p_it_t001w[]
    EXCEPTIONS
      conversion_failed    = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign   = 'I'.
rs_site-option = 'EQ'.
rs_site-low    = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
    LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
      l_index   = sy-tabix.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = <fs_t001w>-werks
        IMPORTING
          output = <fs_t001w>-werks.
      MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
      IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
      append site to ranges
        CLEAR rs_site.
        rs_site-sign   = 'I'.
        rs_site-option = 'EQ'.
        rs_site-low    = <fs_t001w>-werks.
        APPEND rs_site TO rt_site.
        CONTINUE.
      ENDIF.
    ENDLOOP.
    SORT p_it_t001w BY werks.
    SORT rt_site.
ENDIF.
ENDFORM.                    " get_storecodes
*&      Form create_final_table_structure
FORM create_filedcat   USING    p_it_t001w      LIKE it_t001w[]
                                p_it_site       LIKE it_site[]
                       CHANGING p_it_fieldcat   LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w>     LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site>      LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname    TYPE slis_fieldname,
workarea for site ranges
rs_site        LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname    = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING :   'MTART'      'CHAR'        '5' ,
                               'MTBEZ'      'CHAR'        '25' ,
                               'MATKL'      'CHAR'        '6' ,
                               'WGBEZ'      'CHAR'        '20' ,
                               'MATNR'      'CHAR'        '18' ,
                               'MAKTX'      'CHAR'        '30' ,
                                l_fieldname 'CHAR'        '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
                                       'Divsion Description',
                                       'MC Code',
                                       'MC Description',
                                       'Article',
                                       'Article Description',
                                        l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
    READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
                                                              BINARY SEARCH.
    IF sy-subrc = 0           AND <fs_t001w> IS ASSIGNED AND
       <fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
      CLEAR : l_fieldname, rs_site.
      l_fieldname    = <fs_site>-werks.
    prepare fieldcatalog
      PERFORM build_fieldcatalog USING : l_fieldname    'CHAR'   '17'.
    create header for excel
      PERFORM create_excel_header USING l_fieldname .
      CONTINUE.
    ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM.                    " create_final_table_structure
*&      Form build_fieldcatalog
FORM build_fieldcatalog USING    p_fieldname      TYPE slis_fieldname
                                  p_datatype       TYPE datatype_d
                                  p_length         TYPE intlen.
DATA : ls_fieldcat    LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname   = p_fieldname.
ls_fieldcat-datatype    = p_datatype.
ls_fieldcat-intlen      = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM.                    " build_fieldcatalog
*&      Form create_final_table_structure
FORM create_final_table_structure USING    p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fieldcat
    IMPORTING
      ep_table        = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM.                    " create_final_table_structure
*&      Form create_excel_header
FORM create_excel_header USING    p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM.                    " create_excel_header
*&      Form prepare_final_data
FORM prepare_final_data .
DATA          : l_matnr       LIKE g_matnr,
                  l_werks       LIKE g_werks,
                  l_index       LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard>     LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
    l_index    = sy-tabix.
    IF l_matnr IS INITIAL.
      l_matnr = <fs_mard>-matnr.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      UNASSIGN : <fs_value>, <fs_final>.
    Create dynamic work area and assign to FS
      CREATE DATA t_line LIKE LINE OF <ft_final>.
      ASSIGN t_line->*   TO <fs_final>.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_mard>-matnr.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    getting Article Type,MC & its Descriptions
      PERFORM get_other_data    USING     l_matnr
                                          l_werks.
    ELSEIF l_matnr <> <fs_mard>-matnr.
      APPEND <fs_final> TO <ft_final>.
      CLEAR l_matnr.
      l_matnr = <fs_mard>-matnr.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      UNASSIGN : <fs_value>, <fs_final>.
    Create dynamic work area and assign to FS
      CREATE DATA t_line LIKE LINE OF <ft_final>.
      ASSIGN t_line->*   TO <fs_final>.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_mard>-matnr.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    getting Article Type,MC & its Descriptions
      PERFORM get_other_data    USING     l_matnr
                                         l_werks.
    ELSE.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    ENDIF.
    IF l_index = g_lines.
      APPEND <fs_final> TO <ft_final>.
    ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM.                    " prepare_final_data
*&      Form get_other_data
FORM get_other_data USING    p_l_matnr
                              p_l_werks.
FIELD-SYMBOLS : <fs_mara>     LIKE LINE OF it_mara,
                  <fs_t023t>    LIKE LINE OF it_t023t,
                  <fs_t134t>    LIKE LINE OF it_t134t,
                  <fs_makt>     LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr.   " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
    ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
    <fs_value>        = <fs_mara>-mtart.
    ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
    <fs_value>        = <fs_mara>-matkl.
    READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr   BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
      ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_makt>-maktx.
    ENDIF.
    READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
      ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>      = <fs_t023t>-wgbez.
    ENDIF.
    READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
      ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>      = <fs_t134t>-mtbez.
    ENDIF.
ENDIF.
ENDFORM.                    " get_other_data
*&      Form display_data
      text
FORM display_data USING    p_l_table
                            p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
                               l_fcat = p_l_fcat ).
ENDFORM.                    " display_data

I don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
        call method set_colname
          EXPORTING iv_tab = alv_tab
                    iv_colid = 'xxxx' "fieldname from the table
                    iv_stxt = text-t54
                    iv_mtxt = text-t55
                    iv_ltxt = text-t55.
METHOD set_colname .
data:
          alv_cols type REF TO cl_salv_columns_table,
          alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
        call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
        call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
        IF iv_stxt <> ''.
          CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
        ENDIF.
        IF iv_mtxt <> ''.
          CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
        ENDIF.
        IF iv_ltxt <> ''.
          CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
        ENDIF.
   CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname

Deployed PAR file webservices are not displayed in SOAP admin

Similar Messages

Maybe you are looking for