Deployed/Suspension

I am currently deployed to Afghanistan. As we do not have CDMA in this country, I cannot use my phone. If I suspend my plan, will there be any negative impacts? If I lose my unlimited data plan, I will definitely definitely definitely move my account to Sprint when I return. What really sucks is I have wifi, but still cannot access the Google Market (or anything else). Very disappointed customer.
Thanks
--J

j2k4real wrote:
I am currently deployed to Afghanistan. As we do not have CDMA in this country, I cannot use my phone. If I suspend my plan, will there be any negative impacts? If I lose my unlimited data plan, I will definitely definitely definitely move my account to Sprint when I return. What really sucks is I have wifi, but still cannot access the Google Market (or anything else). Very disappointed customer.
Thanks
--J
Nothing will happen give your orders to Verizon and they can suspend your account for however long you will be deployed.
There's a few things you can't complain about with Verizon though...
Anything Google can't be accessed through most middle eastern countries.  If you need more information on that you can check with Google.  There's a slew of other sites that are not allowed, but you have to check their laws in that country...  

Similar Messages

  • Suspension(Deployment)

    I wanted to share my great experience. I was deployed to Afghanistan in Aug 2013. I had two phone lines for my wife and myself. I called to Verizon to cancel my phone line. They told me to suspend my line instead of cancellation so I can reinstate my phone after I come back. However, I told them to cancel my line anyway because I would use the prepaid phone after I come back. I asked them whether they needed my depolpyment orders for cancellation. However, they said that phone conversation should be good enough so I didn't send my deployment orders for cancellation. They didn't cancel or suspend until my last day in the state. Therefore, I had to call them again 12 hours before I flew out. I found out that they have been charged my phone line that was supposed to be cancelled. After I got back from my deployment last year, I had a lot of family issues such as death of my father-in-law and illness of my mother in law. I didn't check the my cell phone bill until everything settled down. I called the customer service center to talk about this issue with a supervisor. They put me on hold for almost one hour. The lady whom I spoke tried to help me out but I was not able to get any answers. It is overcharged $700.00.. .. What should I do????

    Disregard it. Received the incorrect information from Verizon.

  • Deployed and need help to understand this...If you are a verizon representative PLEASE READ!

    I called forward ahead of time to have my plan susspended while i am deployed, i told verizon i wanted my line placed on hold starting on jan 7, 2011 due to i was gonna be deployed to afganistan for a year...the representative told me it would be put on hold untill my return...come to find out i just started receiving mail now that it april sayin I am past due for a few months and they are ready to send it to a collection agancy...how do i go about solving this problem, due to it is hard to get the time to use a phone over here, the internet is much more accessable

    kingnecross wrote:
    I called forward ahead of time to have my plan susspended while i am deployed, i told verizon i wanted my line placed on hold starting on jan 7, 2011 due to i was gonna be deployed to afganistan for a year...the representative told me it would be put on hold untill my return...come to find out i just started receiving mail now that it april sayin I am past due for a few months and they are ready to send it to a collection agancy...how do i go about solving this problem, due to it is hard to get the time to use a phone over here, the internet is much more accessable
    If you are deployed you have the option to request a military suspension for your account without billing for up to 24 months with the option to call back and extend your suspension. Please keep in mind that any unbilled services up to the day of suspension must be paid when billed in order to avoid any collection attempts like the one described on your post.

  • Deployed soldier with question on bill

    before i deployed at the end of may i went to a verizon outlet and provided a copy of my deployment orders and military i.d. in order to place a military stop on my plan. my service is now suspended however it wasnt done so until after i recieved a bill for mid june through july. the payment was automatic. how do i get a refund? i do not like using an open forum for this issue however i have no phone access and i tried refreshing the contact us page every couple of minutes to utilize the chat portion for nearly an hour with no luck.

    You might try contacting one of the Verizon reps that occasionally roam this forum, as noted here:
    Re: Deployed -- Phone Suspension
    You'd need to contact them via Direct Message; here's how to do that:
    How To: Direct Message

  • Error while deploying a PAR file from NWDS into an ECC.

    Hi all,
    I am getting this error while deploying a PAR file from NWDS into an ECC.
    Operation Failed: Please make sure the server is running or check the log (sap-plugin.log) for
    more detail.
    My server is running properly
    1 - Where is sap-plugin.log file? I don´t find it. 
    2 - Could there be another file with another name with information about the error?
    3 - Is there another way to deploy the file directly from the ECC?
    Regards,

    Hi,
    Just make sure you have maintained correct server setting to check the same open the NWDS and follow this path
    Windows/ Prefereces / SAP Enterprise Portal
    Check the following enteries
    Alias
    Host
    Port
    Login etc.
    Regards,

  • Error while deploying a workflow in OWB

    Hi,
    I am getting the below error while deploying a workflow in Control Center.
    ORA-29532: Java call terminated by uncaught Java exception: java.sql.SQLException: The file /u01/app/oracle/product/11.2.0.2/dbhome_1/owb/bin/admin/rtrepos.properties cannot be accessed or has not been properly created on the server XXXXXX. If the file does not exist or if the database owner (normally user 'oracle') does not have the required file permissions or if the file has not been properly created then the file can be recreated by running the SQL*Plus script /u01/app/oracle/product/11.2.0.2/dbhome_1/owb/rtp/sql/reset_repository.sql (in a RAC environment the file must be manually copied to each server which is used for OWB). Otherwise if using a 10.2 database instance, then please run the SQL*Plus script /u01/app/oracle/product/11.2.0.2/dbhome_1/owb/UnifiedRepos/reset_owbcc_home.sql.
    Did any one faced this issue before?
    Kindly let me know the steps to resolve the issue.
    Thanks.

    Hi Vidyanand,
    Did you create the runtime access user using the runtime assistant? Did you select the correct runtime repository (if you have more) to associate your runtime access user with?
    Note that there are 4 database roles being created when you create a runtime repository owner:
    - OWB_A_<runtime repository owner>
    - OWB_D_<runtime repository owner>
    - OWB_R_<runtime repository owner>
    - OWB_U_<runtime repository owner>
    If you would grant those roles to a user, then that user becomes an access user for the user with username <runtime repository owner>.
    Note that you can also use the runtime repository credentials to connect to the runtime repository for deployment purposes, but you may not want that because of security concerns.
    Thanks,
    Mark.

  • Error While Deploying A Web Dynpro Appln thru NWDS

    HI,
    I am getting an error while deploying a Web Dynpro Application through NWDS.Following is the Exception
    Aborted: development component '<ComponentName>'/'local'/'LOKAL'/'0.2006.07.26.15.06.05':Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [sapsbx28] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
    When i give a request for deployment it asks for the SDM password. I enter a valid SDM pwd. If i enter  a invalid SDM pwd i get  some other exception. So the pwd SDM entered by me is correct.
    can any one help me in solving this
    regards
    Nilesh Taunk

    Hi Nilesh,
           Try opening Visual Admin if your not able to login with username(administrator) and password. Problem with NWD2004s do the following steps.
    C:\usr\sap\J2E\JC01\j2ee\configtool->configtool.bat->open it
    1. Click on Secure store
    2. Right you will find :
    admin/password/J2E->retype your admin passowrd which you gave during installation=>SAVE properly
    Restart the server and try login visual admin
           Deploy now...Other wise see this thread same error solved:
    Re: An Deploy Problem about Credentials.
    Regards
    Suresh

  • Step-by-Step Help Needed for Deploying Some Adobe Software

    We are a K-12 educational institution.  I am currently working at setting up a computer lab with about 16 MacMini computers.
    I'm VERY new to the realm of servers, deployment, using terminal, etc.
    I've done lots of research to make it to where I am, but just can't wrap my head around what needs done next with the Adobe products.
    I am using Server OSX (v3) and DeployStudio (v 1.6.3) to try and manage the computers.
    Both my server and clients are running Mavericks 10.9.
    I deployed my core images successfully and would like to now send Adobe products only the computers I choose since I have limited licenses.
    We have volume licenses of Adobe InDesign CS6 and Photoshop Elements 12 that we would like to deploy.
    I have been referencing the following sites, but just can't seem to wrap my head around the EXACT steps that need to be taken.
    http://blogs.adobe.com/oobe/2010/10/adobe-provisioning-toolkit-enterprise-edition.html
    http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
    http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s2.html
    http://forums.adobe.com/message/5781663
    For Adobe InDesign CS6 - I've done the following:
    Created an "Installation Package" using Adobe Application Manager Enterprise Edition (AAMEE v6.2.112.0) using the following instructions.
    http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
    If I log into the client computer, put the package ON the client computer, and run it...it takes me through the install and works wonderfully.It's not automated like I wanted/thought I set it up to do. I have to click through the steps of the installer.
    If I try to deploy it using the "Package install" Workflow in DeployStudio...it loads it during the workflow, then skips through it, acts like it installed it, but it isn't actually installed.Is there a setting that I need to possibly change somewhere?
    For Adobe Photoshop Elements 12 - I'm a bit lost and mostly just have questions:
    I know that I can't use AAMEE and need to use APTEE (Adobe Provisioning Toolkit Enterprise Edition).
    How do I deploy the software? Create my own Package using PackageMaker?
    Which computer do I run APTEE on? All the instructions I can find just say, "do this" - but don't specify where.
    Do I have to open terminal and run the commands on each client computer AFTER installing PE12?
    OR
    Do I run the commands BEFORE deployment on my package stored on my server that is ready for deployment?
    It really comes down to me just not 100% understanding how APTEE works.
    I hope that pertrays my dilemma. I've tried to explain best I can.  If you have any questions - let me know!
    Thanks in advance for any insight you can give!

    We are a K-12 educational institution.  I am currently working at setting up a computer lab with about 16 MacMini computers.
    I'm VERY new to the realm of servers, deployment, using terminal, etc.
    I've done lots of research to make it to where I am, but just can't wrap my head around what needs done next with the Adobe products.
    I am using Server OSX (v3) and DeployStudio (v 1.6.3) to try and manage the computers.
    Both my server and clients are running Mavericks 10.9.
    I deployed my core images successfully and would like to now send Adobe products only the computers I choose since I have limited licenses.
    We have volume licenses of Adobe InDesign CS6 and Photoshop Elements 12 that we would like to deploy.
    I have been referencing the following sites, but just can't seem to wrap my head around the EXACT steps that need to be taken.
    http://blogs.adobe.com/oobe/2010/10/adobe-provisioning-toolkit-enterprise-edition.html
    http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
    http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s2.html
    http://forums.adobe.com/message/5781663
    For Adobe InDesign CS6 - I've done the following:
    Created an "Installation Package" using Adobe Application Manager Enterprise Edition (AAMEE v6.2.112.0) using the following instructions.
    http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
    If I log into the client computer, put the package ON the client computer, and run it...it takes me through the install and works wonderfully.It's not automated like I wanted/thought I set it up to do. I have to click through the steps of the installer.
    If I try to deploy it using the "Package install" Workflow in DeployStudio...it loads it during the workflow, then skips through it, acts like it installed it, but it isn't actually installed.Is there a setting that I need to possibly change somewhere?
    For Adobe Photoshop Elements 12 - I'm a bit lost and mostly just have questions:
    I know that I can't use AAMEE and need to use APTEE (Adobe Provisioning Toolkit Enterprise Edition).
    How do I deploy the software? Create my own Package using PackageMaker?
    Which computer do I run APTEE on? All the instructions I can find just say, "do this" - but don't specify where.
    Do I have to open terminal and run the commands on each client computer AFTER installing PE12?
    OR
    Do I run the commands BEFORE deployment on my package stored on my server that is ready for deployment?
    It really comes down to me just not 100% understanding how APTEE works.
    I hope that pertrays my dilemma. I've tried to explain best I can.  If you have any questions - let me know!
    Thanks in advance for any insight you can give!

  • Deploying only Acrobat XI Pro CC package w/ Enterprise Serial # - Still getting "Sign In Required"

    Downloaded Creative Cloud Packager to create a serialized package of only Acrobat XI Pro.  I further customize the deployment via Adobe Customization Wizard XI, but did not re-enter the serial number (as suggested).  I am able to deploy from the Exceptions folder with the following cmd, msiexec /i "%inst%AcroPro.msi" PATCH="%inst%Updates\AcrobatUpd11006.msp" TRANSFORMS="%inst%Transforms\en_US.mst" /qn.  Upon launching Acrobat, I receive the a pop-up message, "Sign In Required.  Siging in with an Adobe ID and registering Creative Cloud Membership Enterprise is required within 32767 days otherwise it will stop working."  I don't understand why the serial number and Adobe ID I enterred when packaging did not carry over.  Any insight would be appreciated.

    Downloaded Creative Cloud Packager to create a serialized package of only Acrobat XI Pro.  I further customize the deployment via Adobe Customization Wizard XI, but did not re-enter the serial number (as suggested).  I am able to deploy from the Exceptions folder with the following cmd, msiexec /i "%inst%AcroPro.msi" PATCH="%inst%Updates\AcrobatUpd11006.msp" TRANSFORMS="%inst%Transforms\en_US.mst" /qn.  Upon launching Acrobat, I receive the a pop-up message, "Sign In Required.  Siging in with an Adobe ID and registering Creative Cloud Membership Enterprise is required within 32767 days otherwise it will stop working."  I don't understand why the serial number and Adobe ID I enterred when packaging did not carry over.  Any insight would be appreciated.

  • Issues with Creative Cloud for teams deployment workflow

    The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
    First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
    [Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
    Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
    Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
    Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
    It can be installed from command line by:
    Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
    Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
    Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe Systems

    Hi Boncker,
    I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
    Please do let us know if that worked for you or not .
    Cheers,
    Kartikay Sharma

  • How do you deploy adobe acrobat xi from creative cloud for enterprise?

    Hello,
         We purchased Creative Cloud Enterprise and our new supervisor wants adobe acrobat on all computers.  I downloaded the package through Creative Cloud and used the customization wizard to customize the msi in the exceptions folder just like the instructions said.  I followed the steps and deployed it out using Dell Kace.  When a user tries to open Acrobat, it tells them they have a trial version and they must register the product.  The instructions for the customization wizard said not to put the creative cloud serial number into the customization tool.  Is there something I'm missing with deploying adobe acrobat and creative cloud?
    Thanks,
    Michael

    I'm not a CC expert, but I think normally admins configure Acrobat and then deploy everything via the Creative Cloud Packager. Acrobat certainly needs to be licensed, so when you only have a CC license, it's best to deploy in a standard way so that Acrobat get serialized with the license you have.
    19   Creative Cloud Packager Installs — Enterprise Administration Guide
    hth,
    Ben

  • Deploy Adobe Creative Cloud Enterprise

    Anyone deploying Adobe CC ENT in a Windows environment have a script to share that will deploy the exceptions and the build file correctly? I'm using Win7 clients and Server 2008 R2 GPO to deploy.
    I have a deploy.bat file in the Adobe Creative Cloud\Exceptions directory with the following script. I realize this isn't correct, but am I somewhat close? What do I need to add or change to this process to get this deployed? School starts in a couple weeks and I need this deployed to 200 machines.
    ExceptionDeployer --workflow=install --mode=pre --installLanguage=en_US
    \\servername\Adobe Creative Cloud\Build\setup.exe
    ExceptionDeployer --workflow=install --mode=post

    I'm not a CC expert, but I think normally admins configure Acrobat and then deploy everything via the Creative Cloud Packager. Acrobat certainly needs to be licensed, so when you only have a CC license, it's best to deploy in a standard way so that Acrobat get serialized with the license you have.
    19   Creative Cloud Packager Installs — Enterprise Administration Guide
    hth,
    Ben

  • Adobe Creative Cloud Enterprise Deployment Issues using SCCM 2012 R2

    Hi,
    I have been trying to deploy Adobe Creative Cloud Enterprise to Windows 8.1 machines that are identical, using SCCM 2012 R2.
    The Adobe package seems fine, because it seems to deploy successfully to some machines. And SCCM 2012 R2 has been configured correctly, as I can deploy other software using it, and again, it deploys Adobe CC successfully to some of the machines.
    I have tried comparing the package that is downloaded on the test machine/client machine, with the original package on the distribution point, using Beyond Compare, and there are no differences.
    I have contacted Adobe Enterprise Support, and they asked me to send to them log files from Event Viewer, the msi installer, and other Adobe logs, from the machine that failed the deployment. However, after Adobe studying them, they told me that they could not identify any problems... Strange, because I could have sworn that I saw error 1603 pop up over 20 times on different machines indicating that the 'Set-up.dat' file had a problem with it.
    After all the testing on over 20 identical machines (same hardware/same software), using different configurations on SCCM 2012 R2 and the client machines, I still can't seem to have a reliable solution to deploying Adobe CC.
    The fact that it deploys successfully on one machine and fails on another, or sometimes deploy to two machines and fail on another (simultaneously), is something that I don't understand.
    Another thing is that, if I retry the deployment 10-15 times after it failed the first time, it might go through...
    Adobe Enterprise Support asked me if they could remote into a machine that failed the deployment to have a look at it and I agreed to that option, but it seems like my issue has been ignored because they never got back to me.
    Has anyone had this kind of problem or anything similar before?
    I need to be able to deploy this remotely to 100+ machines. So installing manually is not an option.
    Any help is appreciated.
    This was posted in the wrong section a few days ago. I'm hoping I can get some help here.
    Case Number: 1862659812
    UPDATE: I spoke to Adobe Customer Support and after 1.5 hours on the phone with a remote session going on, problem was still not solved or identified. Additional log files have been sent and now I'm waiting for a call back.

    Hi Robert,
    We seem to be having a very similar issue.  Our installs would randomly fail with error code 1603 and an error message about a fault in Set-up.dat.  Failure rate was near 95% on our 900 machines.  Adobe Support and Karl having been looking into our issues but so far no solution has been found.
    Having done a lot of investigating we've managed to deploy our package using a schedule task running as a domain admin.  This is a nasty solution and we don't intend on using this permanently, but we needed to get the package out.
    Are you seeing any of the following:
    Entries in PDApp.log:
    [FATAL] |  | ASU | DeploymentManager | DeploymentManager |  |  | 2900 | The Bootstrapper Process is (5).Stopping the installation process.
    [FATAL] |  | ASU | DeploymentManager | DeploymentManager |  |  | 2900 | The return code from the Adobe Installer Process is (33).Stopping the uninstallation process.
    [WARN] |  | ASU | DeploymentManager | DeploymentManager |  |  | 2900 | Failed to find the pdb database.
    [WARN] |  | ASU | DeploymentManager | DeploymentManager |  |  | 2900 | Failed to get the local payload database handle.
    Event Log:
    Faulting application name: Set-up.dat, version: 2.9.1.474, time stamp: 0x54e11f94
    Faulting module name: Set-up.dat, version: 2.9.1.474, time stamp: 0x54e11f94
    Exception code: 0xc0000005
    Fault offset: 0x000d7c52
    Faulting process id: 0xb40
    Faulting application start time: 0x01d072a073861622
    Faulting application path: \\server.name.path\Adobe CC\FullPackage\Build\ASU\Set-up.dat
    Faulting module path: \\server.name.path\Adobe CC\FullPackage\Build\ASU\Set-up.dat
    Report Id: c86d9216-de93-11e4-8284-782bcb99e284
    Faulting package full name:
    Faulting package-relative application ID:
    Installer Log
    Indicates it can't find the Media_db.  We noticed that the folder C:\Program Files (x86)\Common Files\Adobe\caps doesn't get created on the machines were the install fails, so error message is correct in that there isn't a Media_db.db.  Sysinterals Process Monitor seems to show that the setup tried to create the folder/files but they don't actually get created.  Copying a Media_db into the folder from another machine seems to allow the installation to almost finish, but unsurprisingly you end up with problems later on.

  • Starting deployment prerequisites: error in BI-Java installation sapinst

    Hi all,
    We are in process updating Bw 3.5 to BI 7.0 we hace sucessfully completed the Upgrade but while installing Bi java thru Sapinst in third step like java instance installtion  i was stck with the below error.
               We have downloaded the Cryptographic file and placed in jdk folder still the same problem is  coming.
    Please suggest...
    Thanks,
    Subhash.G
    Starting deployment prerequisites:
    Oct 13, 2007 2:42:18 AM  Error: Creation of DataSource for database "BWQ" failed.
    Original error message is:
    com.sap.sql.log.OpenSQLException: Error while accessing secure store: Encryption or decryption is not possible because the full version of the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Jurisdiction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm..
    Stack trace of original Exception or Error is:
    com.sap.sql.log.OpenSQLException: Error while accessing secure store: Encryption or decryption is not possible because the full version of the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Jurisdiction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm..

    Problem solved  followed the notes 1063396.

  • Cannot deploy par from NWDS

    Hi,
    I am not able to deploy par file into the DEV EP instance. Since the sys # is 00, I am using 50018 as the port number and very sure that the host name is ok. the error message in sap-plugin.log suggests that the upload response is the default login page. I have attached the stacktrace from plugin.log.
    [05.12.05 / 15:45] #DEBUG LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.PortalPlugin > Factory initialized !
    [05.12.05 / 16:03] #DEBUG LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.PortalPlugin > Startup in progress
    [05.12.05 / 16:03] #DEBUG LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.PortalPlugin > Factory initialized !
    [05.12.05 / 16:31] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > Upload Error message: Upload seems to have failed
    [05.12.05 / 16:31] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > Upload Response: <html><head><LINK REL=stylesheet HREF="/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/customer/Pioneer/glbl/glbl_ie5.css?6.0.13.0.1">
    <LINK REL=stylesheet HREF="/irj/portalapps/com.sap.portal.design.urdesigndata/themes/portal/customer/Pioneer/ur/ur_bdy_prtl_ie5.css?6.0.13.0.1">
    <LINK REL=stylesheet HREF="/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/customer/Pioneer/prtl_std/prtl_std_ie5.css?6.0.13.0.1">
    <!-- EPCF: BOB Core -->
    <META http-equiv="Content-Script-Type" content="text/javascript">
    <SCRIPT src="/irj/portalapps/com.sap.portal.epcf.loader/script/standard/js13_epcf.js?6.0722"></SCRIPT>
    <SCRIPT>
    <!--
    EPCM.relaxDocumentDomain();
    EPCM.init( );
    EPCM.DSM.init( );
    function SAPWP_receiveSessInfo( sessInfo, frameRef ){
      EPCM.DSM.processSession( sessInfo, frameRef );
    //-->
    </SCRIPT>
    <!-- EPCF: EOB Core -->
    <!-- HTML Business for Java, 60NW_VAL_REL, 145109, Wed Jul 13 10:38:22 PDT 2005 -->
    <!-- HTMLB: begin VARS -->
    <script language="JavaScript">
    ur_system = ;
    </script>
    <!-- HTMLB: end   VARS -->
    <title >SAP Enterprise Portal 6.0</title><meta HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=UTF-8"><link  REL=STYLESHEET  HREF="/irj/portalapps/com.sap.portal.design.urdesigndata/themes/portal/customer/Pioneer/ur/ur_ie5.css?6.0.13.0.1"  TYPE="text/css" ><link  REL=STYLESHEET  HREF="/irj/portalapps/com.sap.portal.runtime.logon/css/logon.css"  TYPE="text/css" ><link  REL=STYLESHEET  HREF="/irj/portalapps/com.sap.portal.runtime.logon/css/main2.css"  TYPE="text/css" ></head><body class="prtlBody urFontBaseFam urScrl">
    <!-- EPCF: Component com.sap.portal.runtime.logon.certlogon, hnlfbdolaebaghofikiedbahpmidieno -->
    <!-- EPCF: Component com.sap.portal.runtime.logon.default, hobbmlmpbnllcpciikmkhjahpmidieno -->
    <!-- component context:com.sap.portal.runtime.logon.default-->
    <!-- class: com.sapportals.portal.ume.component.logon.SAPMLogonComponent-->
    <!-- trying to go to page umLogonPage-->
    <!-- before including jsp resource umLogonPage.jsp-->

    Hi,
    you can use this alternative to upload the par file
    System administrator->support->portalruntime->Administration console->click on the browse button to find the par file and click the upload button.
    see this link for more information
    http://help.sap.com/saphelp_nw04/helpdata/en/2d/b8b2426dbec86ae10000000a155106/frameset.htm
    reward useful answerd

Maybe you are looking for