Deploying a BPEL process for testing in JDeveloper

I'm having issues with consistently being able to make changes to my BPEL flow and being able to deploy it. I strongly suspect there has to be a better way than what I am doing and I'm hoping the good folks of this forum can give me some pointers.
Here's what I'm doing now that works most of the time:
1. Test my web service in the development environment (right-mouse Test Web Service). I believe this starts up the OC4J server and allows my references in my BPEL specification to be validated.
2. Make my changes, rebuild, and verify no warnings or errors.
3. View Application Servers, select my BPEL service, stop and undeploy it.
4. Deploy my BPEL project to SAR file.
5. Deploy my BPEL project to BundledOC4JServer.
6. Go back to Applications Servers, refresh it (which has its own challenges) and stop and undeploy my BPEL service again.
6. Stop the servers launched when I asked to test my web service.
7. Test my web service again - which relaunches my OC4J server.
8. Go back to Application Servers and refresh to see my hopefully updated BPEL application.
9. Launch the SOA Console in Internet Explorer. This should show my BPEL application. If I don't do step 8, it typically doesn't ...
10. Do some action that causes my BPEL application to initiate.
11. Refresh the SOA Console to see the process that resulted. Drill into it to see the results. Usually, but not always, this reflects my changes. Sometimes it only shows an entry for the process that I can't drill into, and this seems to be correlated with not having the SOA Console running when I initiated my BPEL process.
So, this is all quite cumbersome and not completely reliable. I'm looking for guidance on how this all should be done!
Thank you all in advance.

Hi,
Did you follow the instructions provided on the wiki?
http://wiki.open-esb.java.net/Wiki.jsp?page=HttpBcGetInteraction
Which version of OpenESB are you using?
It will be more helpful to post your question on the users@openesb mailing list where the relevent developer can answer your question.
https://open-esb.dev.java.net/MailingLists.html
rgds
Jason

Similar Messages

Error While Deploying the BPEL Process using obant script

Hi All,
I am getting the following error while deploying the BPEL Process using obant script. we are using the BPEL Version 10.1.2.0.2.Any information in this regard will be really helpful.
Buildfile: build.xml
main:
[bpelc] file:/home5102/dibyap/saravana/Test/CreditRatingService.wsdl
[bpelc] validating "/home5102/dibyap/saravana/Test/CreditRatingService.bpel" ...
BUILD FAILED
/home5102/dibyap/saravana/Test/build.xml:15: ORABPEL-01002
Domain directory not found.
The process cannot be deployed to domain "default" because the domain directory "/opt02/app/ESIT/oracle/esit10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/default/deploy" cannot be found or cannot b
e written to.
Please check your -deploy option value; "default" must refer to a domain that has been installed locally on your machine.
Total time: 23 seconds
dibyap@ios5102_ESIBT:/home5102/dibyap/saravana/Test>
Thanks,
Saravana

In 10.1.2.0.2 you need to create your own build.xml
I have found an example, it may be of some help. This does call a property file
cheers
James
<?xml version="1.0" ?>

<project name="ASB_EFT" default="main" basedir=".">

<property name="deploy" value="default" />

<property name="rev" value="1.0" />


<property file="ebusd.properties"/>
<property name="env" value="${env.name}"/>
<property name="current.project.name" value="${project.name}"/>
<property name="target.project.name" value="${project.name}_${env}"/>
<property name="deployment.profile" value ="${env}.properties"/>
<property name="source.development.directory" location="${basedir}"/>
<property name="target.env.directory" location="${basedir}/deploy/${project.name}_${env}"/>
<property file="${deployment.profile}"/>
<property name="build.fileencoding" value="UTF-8"/>

<target name="print.env" description="Display environment settings">
<echo message="Base Directory: ${basedir}"/>
<echo message="Deployment Profile: ${deployment.profile}"/>
<echo message="target.env.directory: ${target.env.directory}"/>
<echo message="Deploy to Domain: ${deployToDomain}"/>
<echo/>
<echo message="os.name: ${os.name}"/>
<echo message="os.version: ${os.version}"/>
<echo message="os.arch: ${os.arch}"/>
<echo/>
<echo message="java.home: ${java.home}"/>
<echo message="java.vm.name: ${java.vm.name}"/>
<echo message="java.vm.vendor: ${java.vm.vendor}"/>
<echo message="java.vm.version: ${java.vm.version}"/>
<echo message="java.class.path: ${java.class.path}"/>
<echo/>
<echo message="env: ${env}"/>
<echo message="current.project.name: ${current.project.name}"/>
<echo message="target.project.name: ${target.project.name}"/>
<echo message="server.name: ${server.name}"/>
</target>

<target name="create.environment">
<copy todir="${target.env.directory}">
<fileset dir="${basedir}"/>
<filterset begintoken="@" endtoken="@">
<filtersfile file="${deployment.profile}"/>
</filterset>
</copy>
<move file="${target.env.directory}/${current.project.name}.jpr" tofile="${target.env.directory}/${target.project.name}.jpr"/>
</target>
<target name="main">

<bpelc input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
</target>
</project>
here is a property file
project.name=ASB_EFT
env.name=ebusd
deployToDomain=default
server.name=[server]
server.port=7788
ebusd\:7788=http://[server]:7788/
IntegrationMailAccount=OracleBPELTest
IntegrationMailAddress=[email]
IntegrationMailPassword=[password]
archivedir=[directory]
inbounddir=/[directory]
errordir=[directory]
outbounddir=[directory]
bpelpw=bpel
dbhost1=[dbserver]
dbhost2=[dbserver]
dbport=1523
dbservice=bpel
dbconnstr=jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523))(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523)))(CONNECT_DATA=(SERVICE_NAME=ebusd)))

Error deploying SOAOrderBooking BPEL Process through Ant

Hello,
I following Oracle SOA Quick Start Guide (Part # B28938-01) to setup Demo SOA Application.
I followed the document Chapter 2 and installed SOA Suite with "Basic Install" and JDeveloper 10.1.3.1.0.
When deploying SOAOrderBooking BPEL Process as mentioned in Page 2-11 Step # 7, I get following error
[bpelc] Error while loading schemas from wsdl file at location "http://localhost:8888/orabpel/default/SelectManufacturer/1.0/SelectManufacturer?wsdl". The reason is Unable to create an InitialContext..
I tried enabling verbose in bpelc command in build.xml file and stack trace indicate java.lang.ClassNotFoundException for oracle.javatools.jndi.LocalInitialContextFactory class.
I'm trying to setup the demo as Proof-of-concept for one of my projects. So any help in resolving this issue will be greatly appreciated. I've include the full log file for reference.
Thanks,
Sankaran.
| Compiling bpel process SOAOrderBooking, revision 1.0
fileset: Setup scanner in dir C:\SOA_OM_Demo\SOADEMO\SOAOrderBooking\bpel with patternSet{ includes: [] excludes: [**/.project, bpel.xml, _bpel.xml, testSuites/**, testsuites/**] }
[bpelc] home directory is: C:\oracle\jdevstudio10131\/integration/bpel
[bpelc] loading WSDLs ...
[bpelc] reading partner client's WSDL at C:\SOA_OM_Demo\SOADEMO\SOAOrderBooking\bpel\SOAOrderBooking.wsdl
[bpelc] done reading wsdl for partner: client
[bpelc] reading partner OrderFulfillment's WSDL at http://localhost:8888/esb/wsil/Fulfillment/OrderFulfillment?wsdl
[bpelc] done reading wsdl for partner: OrderFulfillment
[bpelc] reading partner RapidService's WSDL at C:\SOA_OM_Demo\SOADEMO\SOAOrderBooking\bpel\RapidService.wsdl
[bpelc] done reading wsdl for partner: RapidService
[bpelc] reading partner TaskService's WSDL at C:\SOA_OM_Demo\SOADEMO\SOAOrderBooking\bpel\TaskServiceWSIF.wsdl
[bpelc] done reading wsdl for partner: TaskService
[bpelc] reading partner CustomerService's WSDL at C:\SOA_OM_Demo\SOADEMO\SOAOrderBooking\bpel\CustomerSvc.wsdl
[bpelc] done reading wsdl for partner: CustomerService
[bpelc] reading partner NotificationService's WSDL at C:\SOA_OM_Demo\SOADEMO\SOAOrderBooking\bpel\NotificationService.wsdl
[bpelc] done reading wsdl for partner: NotificationService
[bpelc] reading partner SelectService's WSDL at http://localhost:8888/orabpel/default/SelectManufacturer/1.0/SelectManufacturer?wsdl
[bpelc] done reading wsdl for partner: SelectService
[bpelc] reading partner CreditValidatingService's WSDL at C:\SOA_OM_Demo\SOADEMO\SOAOrderBooking\bpel\CreditValidatingService.wsdl
[bpelc] done reading wsdl for partner: CreditValidatingService
[bpelc] reading partner DecisionServicePL's WSDL at C:\SOA_OM_Demo\SOADEMO\SOAOrderBooking\bpel\DecisionServiceRef.wsdl
[bpelc] done reading wsdl for partner: DecisionServicePL
[bpelc] reading partner OrderStatus's WSDL at C:\SOA_OM_Demo\SOADEMO\SOAOrderBooking\bpel\OrderStatus.wsdl
[bpelc] done reading wsdl for partner: OrderStatus
[bpelc] reading partner Order's WSDL at C:\SOA_OM_Demo\SOADEMO\SOAOrderBooking\bpel\Order.wsdl
[bpelc] done reading wsdl for partner: Order
[bpelc] reading partner OrderSequence's WSDL at C:\SOA_OM_Demo\SOADEMO\SOAOrderBooking\bpel\OrderSequence.wsdl
[bpelc] done reading wsdl for partner: OrderSequence
[bpelc] <WSDLSchemaUtil::loadAllSchemas> loading all schemas for def file:/C:/SOA_OM_Demo/SOADEMO/SOAOrderBooking/bpel/CreditValidatingService.wsdl
[bpelc] <WSDLSchemaUtil::loadAllSchemas> loading all schemas for def http://localhost:8888/CreditService/ValidateCreditCardServiceSoapHttp?WSDL
[bpelc] <WSDLSchemaUtil::loadLocalSchemas> Created schema schema
[bpelc] <WSDLSchemaUtil::loadAllSchemas> loading all schemas for def file:/C:/SOA_OM_Demo/SOADEMO/SOAOrderBooking/bpel/NotificationService.wsdl
[bpelc] <WSDLSchemaUtil::loadLocalSchemas> Created schema schema
[bpelc] <WSDLSchemaUtil::loadLocalSchemas> Created schema schema
[bpelc] <WSDLSchemaUtil::loadAllSchemas> loading all schemas for def file:/C:/SOA_OM_Demo/SOADEMO/SOAOrderBooking/bpel/TaskServiceWSIF.wsdl
[bpelc] <WSDLSchemaUtil::loadAllSchemas> loading all schemas for def file:/C:/SOA_OM_Demo/SOADEMO/SOAOrderBooking/bpel/TaskServiceInterface.wsdl
[bpelc] <WSDLSchemaUtil::loadLocalSchemas> Created schema schema
[bpelc] <WSDLSchemaUtil::loadAllSchemas> loading all schemas for def file:/C:/SOA_OM_Demo/SOADEMO/SOAOrderBooking/bpel/OrderStatus.wsdl
[bpelc] <WSDLSchemaUtil::loadAllSchemas> loading all schemas for def file:/C:/SOA_OM_Demo/SOADEMO/SOAOrderBooking/bpel/DBAdapterOutboundHeader.wsdl
[bpelc] <WSDLSchemaUtil::loadLocalSchemas> Created schema schema
[bpelc] <WSDLSchemaUtil::loadLocalSchemas> Created schema schema
[bpelc] <WSDLSchemaUtil::loadAllSchemas> loading all schemas for def file:/C:/SOA_OM_Demo/SOADEMO/SOAOrderBooking/bpel/Order.wsdl
[bpelc] <WSDLSchemaUtil::loadAllSchemas> loading all schemas for def file:/C:/SOA_OM_Demo/SOADEMO/SOAOrderBooking/bpel/DBAdapterOutboundHeader.wsdl
[bpelc] <WSDLSchemaUtil::loadLocalSchemas> Created schema schema
[bpelc] <WSDLSchemaUtil::loadLocalSchemas> Created schema schema
[bpelc] <WSDLSchemaUtil::loadAllSchemas> loading all schemas for def http://localhost:8888/orabpel/default/SelectManufacturer/1.0/SelectManufacturer?wsdl
[bpelc] <WSDLSchemaUtil::loadLocalSchemas> Created schema schema
[bpelc] BPELValidator
[bpelc] ORABPEL-09701
[bpelc]
[bpelc] Error loading schemas from wsdl.
[bpelc] Error while loading schemas from wsdl file at location "http://localhost:8888/orabpel/default/SelectManufacturer/1.0/SelectManufacturer?wsdl". The reason is Unable to create an InitialContext..
[bpelc] Please verify the schemas defined in wsdl.
[bpelc]
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.loadEmbeddedSchemas(WSDLSchemaManager.java:720)
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.loadSchemasFromWSDL(WSDLSchemaManager.java:610)
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.loadAllSchemas(WSDLSchemaManager.java:313)
[bpelc]      at com.collaxa.cube.lang.compiler.BPELProcessModel.loadWSDLs(BPELProcessModel.java:208)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.BPELValidator.validateClientSide(BPELValidator.java:67)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.validateClientSide(CubeProcessor.java:1130)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.transformClientSide(CubeProcessor.java:449)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeParserHelper.compileClientSide(CubeParserHelper.java:83)
[bpelc]      at com.collaxa.cube.ant.taskdefs.Bpelc.execute(Bpelc.java:626)
[bpelc]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[bpelc]      at org.apache.tools.ant.Task.perform(Task.java:364)
[bpelc]      at org.apache.tools.ant.Target.execute(Target.java:341)
[bpelc]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
[bpelc]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[bpelc]      at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[bpelc]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
[bpelc]      at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[bpelc]      at oracle.jdevimpl.ant.runner.AntLauncher.launch(AntLauncher.java:321)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[bpelc]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[bpelc]      at java.lang.reflect.Method.invoke(Method.java:585)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.runAnt(InProcessAntStarter.java:295)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.mav$runAnt(InProcessAntStarter.java:43)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter$1.run(InProcessAntStarter.java:71)
[bpelc] Caused by: java.lang.IllegalStateException: Unable to create an InitialContext.
[bpelc]      at oracle.javatools.jndi.Names.internalEx(Names.java:172)
[bpelc]      at oracle.javatools.jndi.Names.newInitialContext(Names.java:56)
[bpelc]      at oracle.ide.AddinManager.getAddinManager(AddinManager.java:56)
[bpelc]      at oracle.jdevimpl.webdav.HostUtil.getClient(HostUtil.java:47)
[bpelc]      at oracle.jdevimpl.webdav.api.Authentication.getConnections(Authentication.java:199)
[bpelc]      at oracle.jdevimpl.webdav.api.Authentication.getAuthorization(Authentication.java:106)
[bpelc]      at oracle.jdevimpl.webdav.api.DAVAuthenticator.getPasswordAuthentication(DAVAuthenticator.java:70)
[bpelc]      at java.net.Authenticator.requestPasswordAuthentication(Authenticator.java:300)
[bpelc]      at sun.net.www.protocol.http.HttpURLConnection$1.run(HttpURLConnection.java:267)
[bpelc]      at java.security.AccessController.doPrivileged(Native Method)
[bpelc]      at sun.net.www.protocol.http.HttpURLConnection.privilegedRequestPasswordAuthentication(HttpURLConnection.java:263)
[bpelc]      at sun.net.www.protocol.http.HttpURLConnection.getHttpProxyAuthentication(HttpURLConnection.java:1448)
[bpelc]      at sun.net.www.protocol.http.HttpURLConnection.resetProxyAuthentication(HttpURLConnection.java:1246)
[bpelc]      at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:950)
[bpelc]      at java.net.URL.openStream(URL.java:1007)
[bpelc]      at oracle.xml.parser.v2.XMLReader.openURL(XMLReader.java:2551)
[bpelc]      at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:285)
[bpelc]      at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:259)
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.parseXMLSrc(WSDLSchemaManager.java:2073)
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.parseXSDSrc(WSDLSchemaManager.java:2023)
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.processSchemaImportsAndInclude(WSDLSchemaManager.java:1920)
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.loadEmbeddedSchemas(WSDLSchemaManager.java:716)
[bpelc]      ... 24 more
[bpelc] Caused by: javax.naming.NoInitialContextException: Cannot instantiate class: oracle.javatools.jndi.LocalInitialContextFactory [Root exception is java.lang.ClassNotFoundException: oracle.javatools.jndi.LocalInitialContextFactory]
[bpelc]      at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:657)
[bpelc]      at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247)
[bpelc]      at javax.naming.InitialContext.init(InitialContext.java:223)
[bpelc]      at javax.naming.InitialContext.<init>(InitialContext.java:197)
[bpelc]      at oracle.javatools.jndi.Names.newInitialContext(Names.java:52)
[bpelc]      ... 44 more
[bpelc] Caused by: java.lang.ClassNotFoundException: oracle.javatools.jndi.LocalInitialContextFactory
[bpelc]      at org.apache.tools.ant.AntClassLoader.findClassInComponents(AntClassLoader.java:1166)
[bpelc]      at org.apache.tools.ant.AntClassLoader.findClass(AntClassLoader.java:1107)
[bpelc]      at org.apache.tools.ant.AntClassLoader.loadClass(AntClassLoader.java:977)
[bpelc]      at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
[bpelc]      at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
[bpelc]      at java.lang.Class.forName0(Native Method)
[bpelc]      at java.lang.Class.forName(Class.java:242)
[bpelc]      at com.sun.naming.internal.VersionHelper12.loadClass(VersionHelper12.java:42)
[bpelc]      at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:654)
[bpelc]      ... 48 more
[bpelc] ORABPEL-01021
[bpelc]
[bpelc] BPEL validation failed.
[bpelc] BPEL source validation failed, the errors are:
[bpelc]
[bpelc] [Error ORABPEL-10903]: failed to read wsdl
[bpelc] [Description]: in "bpel.xml", Error loading schemas from wsdl.
[bpelc] Error while loading schemas from wsdl file at location "http://localhost:8888/orabpel/default/SelectManufacturer/1.0/SelectManufacturer?wsdl". The reason is Unable to create an InitialContext..
[bpelc] Please verify the schemas defined in wsdl.
[bpelc] .
[bpelc] [Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
[bpelc] .
[bpelc]
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.validateClientSide(CubeProcessor.java:1133)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.transformClientSide(CubeProcessor.java:449)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeParserHelper.compileClientSide(CubeParserHelper.java:83)
[bpelc]      at com.collaxa.cube.ant.taskdefs.Bpelc.execute(Bpelc.java:626)
[bpelc]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[bpelc]      at org.apache.tools.ant.Task.perform(Task.java:364)
[bpelc]      at org.apache.tools.ant.Target.execute(Target.java:341)
[bpelc]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
[bpelc]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[bpelc]      at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[bpelc]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
[bpelc]      at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[bpelc]      at oracle.jdevimpl.ant.runner.AntLauncher.launch(AntLauncher.java:321)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[bpelc]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[bpelc]      at java.lang.reflect.Method.invoke(Method.java:585)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.runAnt(InProcessAntStarter.java:295)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.mav$runAnt(InProcessAntStarter.java:43)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter$1.run(InProcessAntStarter.java:71)
[bpelc] BPEL validation failed.
[bpelc] BPEL source validation failed, the errors are:
[bpelc]
[bpelc] [Error ORABPEL-10903]: failed to read wsdl
[bpelc] [Description]: in "bpel.xml", Error loading schemas from wsdl.
[bpelc] Error while loading schemas from wsdl file at location "http://localhost:8888/orabpel/default/SelectManufacturer/1.0/SelectManufacturer?wsdl". The reason is Unable to create an InitialContext..
[bpelc] Please verify the schemas defined in wsdl.
[bpelc] .
[bpelc] [Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
[bpelc] .
[bpelc]
BUILD FAILED
C:\SOA_OM_Demo\SOADEMO\SOAOrderBooking\build.xml:72: Validation error
     at com.collaxa.cube.ant.taskdefs.Bpelc.execute(Bpelc.java:647)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
     at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
     at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
     at oracle.jdevimpl.ant.runner.AntLauncher.launch(AntLauncher.java:321)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at oracle.jdevimpl.ant.runner.InProcessAntStarter.runAnt(InProcessAntStarter.java:295)
     at oracle.jdevimpl.ant.runner.InProcessAntStarter.mav$runAnt(InProcessAntStarter.java:43)
     at oracle.jdevimpl.ant.runner.InProcessAntStarter$1.run(InProcessAntStarter.java:71)

UP！！！
The same error occurred in our enviroment:
Buildfile: C:\Softs\oracle\Jdevstudio10131_new\workspace\soademo_101310_preview\SOAOrderBooking\build.xml
pre-deploy:
validateTask:
[echo]
| Validating workflow
[validateTask] url is file:/C:/Softs/oracle/Jdevstudio10131_new/integration/bpm/support/files/WorkflowTaskDefinition.xsd
[validateTask] Validation of workflow task definitions is completed without errors
compile:
[echo]
| Compiling bpel process SOAOrderBooking, revision 1.0
[bpelc] ORABPEL-01021
[bpelc]
[bpelc] BPEL validation failed.
[bpelc] BPEL source validation failed, the errors are:
[bpelc]
[bpelc] [Error ORABPEL-10903]: failed to read wsdl
[bpelc] [Description]: in "bpel.xml", Error loading schemas from wsdl.
[bpelc] Error while loading schemas from wsdl file at location "http://10.171.11.124/orabpel/default/SelectManufacturer/1.0/SelectManufacturer?wsdl". The reason is Unable to create an InitialContext..
[bpelc] Please verify the schemas defined in wsdl.
[bpelc] .
[bpelc] [Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
[bpelc] .
[bpelc]
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.validateClientSide(CubeProcessor.java:1133)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.transformClientSide(CubeProcessor.java:449)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeParserHelper.compileClientSide(CubeParserHelper.java:83)
[bpelc]      at com.collaxa.cube.ant.taskdefs.Bpelc.execute(Bpelc.java:626)
[bpelc]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[bpelc]      at org.apache.tools.ant.Task.perform(Task.java:364)
[bpelc]      at org.apache.tools.ant.Target.execute(Target.java:341)
[bpelc]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
[bpelc]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[bpelc]      at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[bpelc]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
[bpelc]      at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[bpelc]      at oracle.jdevimpl.ant.runner.AntLauncher.launch(AntLauncher.java:321)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[bpelc]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[bpelc]      at java.lang.reflect.Method.invoke(Method.java:585)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.runAnt(InProcessAntStarter.java:295)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.mav$runAnt(InProcessAntStarter.java:43)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter$1.run(InProcessAntStarter.java:71)
[bpelc] BPEL validation failed.
[bpelc] BPEL source validation failed, the errors are:
[bpelc]
[bpelc] [Error ORABPEL-10903]: failed to read wsdl
[bpelc] [Description]: in "bpel.xml", Error loading schemas from wsdl.
[bpelc] Error while loading schemas from wsdl file at location "http://10.171.11.124/orabpel/default/SelectManufacturer/1.0/SelectManufacturer?wsdl". The reason is Unable to create an InitialContext..
[bpelc] Please verify the schemas defined in wsdl.
[bpelc] .
[bpelc] [Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
[bpelc] .
[bpelc]
BUILD FAILED
C:\Softs\oracle\Jdevstudio10131_new\workspace\soademo_101310_preview\SOAOrderBooking\build.xml:72: Validation error
Total time: 3 seconds

Error while deploying the BPEL process

Hi All,
I’m getting the following error while deploying the BPEL process.
“Error:
[Error ORABPEL-10903]: failed to read wsdl
[Description]: in "bpel.xml", Error loading schemas from wsdl.
Error while loading schemas from wsdl file at location "http://ios0501e.idc.ikon.org:7720/vertex-ws/calculate-tax-wsdl.jsp?WSDL". The reason is .
Please verify the schemas defined in wsdl.
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
Kindly let me know if you have any pointers on the above.
Thanks in Advance.
Regards
Sravana

Check you proxy settings. Disable them in your deployment tool / JDeveloper

Perforamance Measuring of BPEL process for Job schedular

Hi All,
I have developed & deployed a bpel process as a job schedular. This process hits two web services & calls another BPEL process. I wanted to measure performance of both the bpel processes. Kindly let me know how shall I proceed. Also wanted to generates reports for the same.
waiting for your help.
Thanks in advance.

Hi All,
I am using 10.1.3.1 version of Oracle server.
waiting for your reply. Need help.
Thanks again!

Error while deploying a BPEL process

Hi All,
When I try to deploy a BPEL process, I am getting the following error:
BUILD FAILED
C:\jdevstudio10133\jdev\mywork\batch_app\batch_proj\build.xml:79: A problem occured while connecting to server "localhost" using port "8888": ORABPEL-02052
Cannot lookup BPEL domain.
The BPEL domain "default" cannot be found; the domain may not have initialized properly.
Please verify that the BPEL domain loader has a valid set of initialization properties in the application properties file.
at com.collaxa.cube.engine.CubeEngineHolder.getStatus(CubeEngineHolder.java:41)
at com.collaxa.cube.engine.CubeEngineHolder.getEngine(CubeEngineHolder.java:52)
at com.collaxa.cube.engine.CubeContextManager.initialize(CubeContextManager.java:29)
at com.collaxa.cube.engine.CubeContextManager.create(CubeContextManager.java:57)
at com.collaxa.cube.ejb.impl.BaseCubeSessionBean.createContext(BaseCubeSessionBean.java:83)
at com.collaxa.cube.ejb.impl.FinderBean.lookupDomain(FinderBean.java:66)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:693)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:43)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at FinderBean_RemoteProxy_4bin6i8.lookupDomain(Unknown Source)
at com.oracle.bpel.client.Locator.lookupDomain(Locator.java:228)
at _deployHttpClientProcess._jspService(_deployHttpClientProcess.java:335)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:724)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:414)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)"
Please help

is your soa suite up and running ?

Error in deploying my BPEL process

I am getting the following error while I tried to deploy my BPEL process:
Error:
[Error ORABPEL-10902]: compilation failed
[Description]: in "bpel.xml", XML parsing failed because "undefined part element.
In WSDL at "file:/D:/projects/MyBPEL/bpel/MySvc-v1.wsdl", message part element "{http://www.company.com/wsdl/MySvc-v1.0}GeneralFault" is not defined in any of the schemas.
Please make sure the spelling of the element QName is correct and the WSDL import is complete.
[Potential fix]: n/a.
I do not understand the error. 'GeneralFault' is defined in MySvc-v1.wsdl and not in a separate xsd.
Here is a portion of MySvc-v1.wsdl:
<?xml version="1.0" encoding="utf-8"?>
<wsdl:definitions name="MySvc-v1.wsdl"
     xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
     xmlns:xsd="http://www.w3.org/2001/XMLSchema"
     xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
     xmlns="http://schemas.xmlsoap.org/wsdl/"
     xmlns:tns="http://www.company.com/wsdl/MySvc-v1"
     xmlns:v1_0="http://www.company.com/wsdl/MySvc-v1.0"
     xmlns:base="http://www.company.com/xsd/Base"
     targetNamespace="http://www.company.com/wsdl/MySvc-v1">
<wsdl:types>
     <xsd:schema xmlns="http://www.w3.org/2001/XMLSchema"
     targetNamespace="http://www.company.com/wsdl/MySvc-v1.0">
          <xsd:import schemaLocation="../xsd/Base.xsd" namespace="http://www.company.com/xsd/Base" />
          <xsd:element name="MyRq">
               <xsd:complexType>
               <xsd:sequence>
                    <xsd:element ref="base:ID" />
                    <xsd:element ref="base:SSN" />
               </xsd:sequence>
               </xsd:complexType>
          </xsd:element>
          <xsd:element name="MyRs">
               <xsd:complexType>
               <xsd:sequence>
                    <xsd:element ref="base:Result" />
                    <xsd:element name="Timestamp" type="xsd:string"/>
               </xsd:sequence>
               </xsd:complexType>
          </xsd:element>
          <xsd:element name="GeneralFault" type="xsd:string" />
     </xsd:schema>
</wsdl:types>
<wsdl:message name="MyRequest">
<wsdl:part name="In" element="v1_0:MyRq" />
</wsdl:message>
<wsdl:message name="MyResponse">
<wsdl:part name="Out" element="v1_0:MyRs" />
</wsdl:message>
<wsdl:message name="fault">
<wsdl:part name="fault" element="v1_0:GeneralFault" />
</wsdl:message>
Thanks,
AJ

So does anyone know why I m getting the following error when the definition of "GeneralFault" is in the .wsdl file? According to the error messge, it sounds like I have to define it in a .xsd file.
Error ORABPEL-10902: compilation failed
Description: in "bpel.xml", XML parsing failed because "undefined part element.
In WSDL at "file:/D:/projects/MyBPEL/bpel/MySvc-v1.wsdl", message part element "{http://www.company.com/wsdl/MySvc-v1.0}GeneralFault" is not defined in any of the schemas.
Please make sure the spelling of the element QName is correct and the WSDL import is complete
AJ

Problem with Ant Script while deploying a BPEL Process

Hi all,
Im making use of Ant script to Deploy a BPEL process ...the bpel process simply invokes the credit rating service and returns the credit rating..credit rating service and the whole BPEL
process are deployed in the default domain...now i made a new domain and making using of Ant scripts to deploy it to this Domain in the same local server ...i followed the steps
from this blog http://blogs.oracle.com/rammenon/2007/07/deploying_bpel_process_to_mult.html now my problem is even though i mention a different Domain Name in
ant- orabpel_dev.properties its always getting deployed to Default domain........can anyone Plzzz help me.
Edited by: 0racler on Aug 15, 2009 12:09 PM

in build.properties of the project -
uncomment (remove the #) and change to the new domain
# Change below if deploying in domain other than "default"
#domain = default
when you run deployProcess target - you should see which domain is used - based on the above variable.
cheers

How to set up approval process for test case in SAP solution manager?

Hi Experts,
We need to setup a 2 level approval process for test case documents in SAP Solution Manager.
e.g. If test case document is uploaded for transaction "MM01" then first it will go to Reviewer1. Once Reviewer1 approves it , should go to Reviewer2.
Adn finally once reviewer2 approves it , it will be complete.
What are the required configurations and steps for approval process setup? It will be helpful if screenshots and detailed steps are provided.
Thanks.
regards,
Sanjana

Hi,
the above requirement we are going develop add on.below code is there. in this code how we can set for line level amount instead of document total amount
Private Function GetCondition(ByVal sCondition As String) As ApprovalTemplateConditionTypeEnum
        Try
            Select Case sCondition
                Case "Deviation from Credit Limit"
                    Return (ApprovalTemplateConditionTypeEnum.atctDeviationFromCreditLine)
                Case "Deviation from Commitment"
                    Return (ApprovalTemplateConditionTypeEnum.atctDeviationFromObligo)
                Case "Gross Profit %"
                    Return (ApprovalTemplateConditionTypeEnum.atctGrossProfitPercent)
                Case "Discount %"
                    Return (ApprovalTemplateConditionTypeEnum.atctDiscountPercent)
                Case "Deviation from Budget"
                    Return (ApprovalTemplateConditionTypeEnum.atctDeviationFromBudget)
                Case "Total Document"
                    Return (ApprovalTemplateConditionTypeEnum.atctTotalDocument)
            End Select
        Catch ex As Exception
            MsgBox(ex.Message())
        End Try
    End Function
Please guide me.
Regds,
Samapth Kumar.

Unable to to deploying a BPEL Process via JDeveloper 10.1.3.5

Hi,
We try to deploye BPEL Process via JDeveloper and we got an error. This is a production error:
RollbackException
Timed out
An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
Build Information:
Oracle BPEL Server version 10.1.3.5.0
Build: 0
Build time: Tue Aug 10 00:59:06 PDT 2010
Build type: release
Source tag: PCBPEL_10.1.3.6.0_GENERIC_100810.0003.2425
Exception Trace:
com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit ApplicationServerTransaction.java@664
com.evermind.server.ApplicationServerTransaction.doCommit ApplicationServerTransaction.java@273
com.evermind.server.ApplicationServerTransaction.commit ApplicationServerTransaction.java@162
com.evermind.server.ApplicationServerTransactionManager.commit ApplicationServerTransactionManager.java@475
com.evermind.server.ejb.EJBTransactionManager.end EJBTransactionManager.java@137
com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke TxRequiredInterceptor.java@57
com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed InvocationContextImpl.java@119
com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke DMSInterceptor.java@52
com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed InvocationContextImpl.java@119
com.evermind.server.ejb.InvocationContextPool.invoke InvocationContextPool.java@55
com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod StatelessSessionEJBObject.java@87
ProcessManagerBean_RemoteProxy_4bin6i8.getMetaData
com.oracle.bpel.client.BPELProcessHandle.getMetaData BPELProcessHandle.java@237
ngProcessList.jspService _ngProcessList.java@113
com.collaxa.cube.fe.JspPage.service JspPage.java@42
javax.servlet.http.HttpServlet.service HttpServlet.java@856
oracle.jsp.runtimev2.JspPageTable.service JspPageTable.java@473
oracle.jsp.runtimev2.JspServlet.internalService JspServlet.java@594
oracle.jsp.runtimev2.JspServlet.service JspServlet.java@518
javax.servlet.http.HttpServlet.service HttpServlet.java@856
com.evermind.server.http.ResourceFilterChain.doFilter ResourceFilterChain.java@64
oracle.security.jazn.oc4j.JAZNFilter$1.run JAZNFilter.java@400
java.security.AccessController.doPrivileged
javax.security.auth.Subject.doAsPrivileged Subject.java@517
oracle.security.jazn.oc4j.JAZNFilter.doFilter JAZNFilter.java@414
com.evermind.server.http.ServletRequestDispatcher.invoke ServletRequestDispatcher.java@644
com.evermind.server.http.ServletRequestDispatcher.unprivileged_include ServletRequestDispatcher.java@177
com.evermind.server.http.ServletRequestDispatcher.access$000 ServletRequestDispatcher.java@68
com.evermind.server.http.ServletRequestDispatcher$1.oc4jRun ServletRequestDispatcher.java@114
oracle.oc4j.security.OC4JSecurity.doPrivileged OC4JSecurity.java@284
com.evermind.server.http.ServletRequestDispatcher.include ServletRequestDispatcher.java@119
com.evermind.server.http.EvermindPageContext.include EvermindPageContext.java@456
Thanks for helpping

It says you're missing the oracle.lite.poljdbc.POLJDBCDriver class which belongs to the Oracle Lite database.
For some reason it is configured in your data-sources.xml, either in config/data-sources.xml or in applications/<your_app_name>/META-INF/data-sources.xml or in your JDev Connections.
Find this configuration and determine whether you need it. If not, remove it.
--olaf

Error while deploying same BPEL process created by jd10.1.3.4 then 10.1.3.3

Hi,
My SOA suite is in 10.1.3.3.
I have created a BPEL process using jdeveloper 10.1.3.4 and deployed it in SOA suite 10.1.3.3, but when I created a same (everything same, even name) with jdeveloper 10.1.3.3 and deployed it, it is giving me the below error:
The following exception occured while processing this request:
Cannot find partnerLinkType 2.
PartnerLinkType "{http://prap.dwp.gov.uk/ns/XXPRP_Contract_Data_LMS_BPEL_ASYN_EXT_RF003_04}XXPRP_Contract_Data_LMS_BPEL_ASYN_EXT_RF003_04" is not found in WSDL at "file:/c10/apps_tier/a/10.1.3/OracleAS/bpel/domains/default/tmp/.bpel_XXPRP_Contract_Data_LMS_BPEL_ASYN_EXT_RF003_04_1.0_d87ec289e0e04b4940c420350f316c55.tmp/_XXPRP_Contract_Data_LMS_BPEL_ASYN_EXT_RF003_04.wsdl".
Please make sure the partnerLinkType is defined in the WSDL.
I even tried,
Opened the same BPEL process (created in jdev 10.1.3.4) in jdev 10.1.3.3 and deployed, it is giving me the same error.
Please suggest what could be the problem.
Regards,
Sreejit

Hi James,
You are correct, the error was something else.
It was my mistake to understand this. I nhave kept everything same while creating my process in jdev 10.1.3.3 but changed my namespace for the process, so even when I undeploy are redeploy, it is looking for the old namespace, and that is due to the tmp folder creation in OracleAS_1\bpel\domains\default\tmp, so need to stop the server ..delete the tmp folder and then redeploy and it did work with new namespace.
Thanks for help.
Regards,
Sreejit

OIM: Error while deploying Custom Approval Process for Self-Register

While deploying the Custom Approval Process for Self-Register, i am getting the following error in scac.log file
Nov 16, 2011 2:48:58 PM oracle.fabric.common.wsdl.SchemaManager isIncrementalBuildSupported
INFO: XMLSchema incremental build enabled.
Nov 16, 2011 2:48:58 PM com.collaxa.cube.CubeLogger info
INFO: validating "ApprovalProcess.bpel" ...
oracle.jrf.UnknownPlatformException: JRF is unable to determine the current application server platform.
     at oracle.jrf.ServerPlatformSupportFactory.getInstance(ServerPlatformSupportFactory.java:79)
     at oracle.integration.platform.blocks.WLSPlatformConfigurationProvider.<clinit>(WLSPlatformConfigurationProvider.java:44)
     at oracle.integration.platform.blocks.FabricConfigManager.<clinit>(FabricConfigManager.java:155)
     at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.loadXpathFunctions(FabricXPathFunctionResolver.java:271)
     at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.loadXPathConfigFile(FabricXPathFunctionResolver.java:153)
     at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.init(FabricXPathFunctionResolver.java:51)
     at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.loadFabricXpathFunctions(BPELXPathFunctionNameResolver.java:57)
     at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.<init>(BPELXPathFunctionNameResolver.java:48)
     at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.<clinit>(BPELXPathFunctionNameResolver.java:44)
     at com.collaxa.cube.lang.compiler.bpel.XPathExprValidatorVisitor.<init>(XPathExprValidatorVisitor.java:122)
     at com.collaxa.cube.lang.compiler.bpel.AssignValidator.<init>(AssignValidator.java:89)
     at com.collaxa.cube.lang.compiler.bpel.BpelParser.<init>(BpelParser.java:452)
     at com.collaxa.cube.lang.compiler.bpel.BPELValidator.validate(BPELValidator.java:60)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.validate(BPEL1Processor.java:329)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.process(BPEL1Processor.java:153)
     at com.collaxa.cube.lang.compiler.CubeParserHelper.compile(CubeParserHelper.java:47)
     at oracle.fabric.bpel.bpelc.BPELComponentValidator.validate(BPELComponentValidator.java:40)
     at oracle.soa.scac.ValidateComposite.validateComponentTypeServicesReferences(ValidateComposite.java:1117)
     at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:500)
     at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
     at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
Nov 16, 2011 2:49:00 PM CubeProcessGenerator compile
WARNING: classpath is: D:\JDev11g\Middleware\jdeveloper\jdev\extensions\oracle.sca.modeler.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.fabriccommon_11.1.1\fabric-common.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.mediator_11.1.1\mediator_client.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.mds_11.1.1\mdsrt.jar;D:\OIMPS1\Middleware\oracle_common\modules\oracle.jps_11.1.1\jps-manifest.jar;;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\classes;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\classes;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\gen-classes;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\lib\oimclient.jar;D:\JDev11g\Middleware\oracle_common\modules\commonj.sdo_2.1.0.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.fabriccommon_11.1.1\fabric-common.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.xdk_11.1.0\xmlparserv2.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\bpel1-1-xbeans.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-common.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\bpel_coherence_config.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-exts.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\thirdparty.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\bpm-analytics.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-thirdparty.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\wsif-binding.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-validator.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\monitor-rt-xbean.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\oracle.soa.bpmn.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\user-patch.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.thirdparty.jar;D:\JDev11g\Middleware\jdeveloper\uddi\lib\oracle.soa.uddi.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\bpm-infra.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\testfwk-xbeans.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-ext.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\soa-infra-scheduler.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\xmlunit-1.1.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\soa-infra-tools.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\soa-xpath-exts.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\oracle-soa-client-api.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.wls.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-client.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime-ext-was.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime-ext-wls.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\oracle.soa.fabric.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.ext_11.1.1\classes
In scac_out.xml file following is the error message
<Fault>
<severity>error</severity>
<loc>/ns:composite</loc>
<line/>
<col/>
<file/>
<msg>
<![CDATA[SCAC-50012]]>
</msg>
</Fault>

Hi,
I have run into the same problem with SOA 11.1.1.5 version. In my case after fixing the following two errors it seems to work fine.
If you have followed the guide, there must be some errors:
First the java code if copied then contains an extra enter value:
Instead of:
"try {
System.out.println("Prototype for invoking an OIM API from a SOA Composite");
System.out.println("RTM Usecase: Self Registration Approval by Organization
Administrator");"
Use the following:
"try {
System.out.println("Prototype for invoking an OIM API from a SOA Composite");
System.out.println("RTM Usecase: Self Registration Approval by Organization Administrator");"
The other error is that you should not use <BEAHOME>/oracle_common/modules/oracle.jps_11.1.1/jps-manifest.jar, but the <BEAHOME>/oracle_common/modules/oracle.jps_11.1.1/jps-api.jar in jdeveloper. After these the deployment to the application server works fine for me.

Compilation error while deploying my BPEL process : ORABPEL-05215

Hi,
I have created a BPEL process and when I try to deploy it, am getting the following error :
BUILD FAILED
D:\SoftWs\JDeveloper\jdev\mywork\AIASamples\CreateCustomerPartyPortalProvABCSImpl\build.xml:79: A problem occured while connecting to server "ple-jgau.us.oracle.com" using port "7777": bpel_CreateCustomerPartyPortalProvABCSImpl_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "CreateCustomerPartyPortalProvABCSImpl" (revision "1.0"): Failed to compile classes.
Failed to compile the generated BPEL classes for "CreateCustomerPartyPortalProvABCSImpl"
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:285)
Whereas, am not getting any error when I compiled the same code [I get two warnings regarding incompatible assignment of variables].
Please help me out.
Thanks in advance,
Senthil.
Message was edited by:
emSenthil

Hi
I have similar problem. When I compiling process I don't have any errors only when I want to deploy see statement like below. Do You have any suggestions how to fix it?
Thanks
BUILD FAILED
C:\bpel_ROTelcoNewOrder_1.0new\build.xml:79: A problem occured while connecting to server "192.168.10.205" using port "80": bpel_ROTelcoNewOrder_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "ROTelcoNewOrder" (revision "1.0"): BPEL validation failed.
BPEL source validation failed, the errors are:
[Error ORABPEL-10007]: unresolved messageType
[Description]: in line 71 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}UpdateInstalledProductRequest.V1" of variable "InvokeUpdateInstalledProduct_UpdateInstalledProduct_InputVariable" is not defined in any of the WSDL files.
[Potential fix]: Make sure the WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}UpdateInstalledProductRequest.V1" is defined in one of the WSDLs referenced by the deployment descriptor.
[Error ORABPEL-10007]: unresolved messageType
[Description]: in line 72 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}InstalledProductUpdateResponse.V1" of variable "InvokeUpdateInstalledProduct_UpdateInstalledProduct_OutputVariable" is not defined in any of the WSDL files.
[Potential fix]: Make sure the WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}InstalledProductUpdateResponse.V1" is defined in one of the WSDLs referenced by the deployment descriptor.
[Error ORABPEL-10007]: unresolved messageType
[Description]: in line 73 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", WSDL messageType "{urn:oracle.enterprise.crm.order.service.Order}NotifyOrderShipment.VERSION_1" of variable "InvokeOrderNotify_NotifyOrderShipment_InputVariable" is not defined in any of the WSDL files.
[Potential fix]: Make sure the WSDL messageType "{urn:oracle.enterprise.crm.order.service.Order}NotifyOrderShipment.VERSION_1" is defined in one of the WSDLs referenced by the deployment descriptor.
[Error ORABPEL-10007]: unresolved messageType
[Description]: in line 79 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", WSDL messageType "{urn:oracle.enterprise.crm.order.service.Order}OrderCompletionRequest.V1" of variable "InvokeOrderCompletion_CompleteOrder_InputVariable" is not defined in any of the WSDL files.
[Potential fix]: Make sure the WSDL messageType "{urn:oracle.enterprise.crm.order.service.Order}OrderCompletionRequest.V1" is defined in one of the WSDLs referenced by the deployment descriptor.
[Error ORABPEL-10007]: unresolved messageType
[Description]: in line 80 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", WSDL messageType "{urn:oracle.enterprise.crm.order.service.Order}OrderCompletionResponse.V1" of variable "InvokeOrderCompletion_CompleteOrder_OutputVariable" is not defined in any of the WSDL files.
[Potential fix]: Make sure the WSDL messageType "{urn:oracle.enterprise.crm.order.service.Order}OrderCompletionResponse.V1" is defined in one of the WSDLs referenced by the deployment descriptor.
[Error ORABPEL-10007]: unresolved messageType
[Description]: in line 91 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}UpdateInstalledProductRequest.V1" of variable "InvokeUpdateIPStatus_UpdateInstalledProduct_InputVariable" is not defined in any of the WSDL files.
[Potential fix]: Make sure the WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}UpdateInstalledProductRequest.V1" is defined in one of the WSDLs referenced by the deployment descriptor.
[Error ORABPEL-10007]: unresolved messageType
[Description]: in line 92 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}InstalledProductUpdateResponse.V1" of variable "InvokeUpdateIPStatus_UpdateInstalledProduct_OutputVariable" is not defined in any of the WSDL files.
[Potential fix]: Make sure the WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}InstalledProductUpdateResponse.V1" is defined in one of the WSDLs referenced by the deployment descriptor.
[Error ORABPEL-10007]: unresolved messageType
[Description]: in line 93 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}GetInstalledProductRequest.V1" of variable "InvokeGetIP_GetInstalledProduct_InputVariable" is not defined in any of the WSDL files.
[Potential fix]: Make sure the WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}GetInstalledProductRequest.V1" is defined in one of the WSDLs referenced by the deployment descriptor.
[Error ORABPEL-10007]: unresolved messageType
[Description]: in line 94 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}GetInstalledProductResponse.V1" of variable "InvokeGetIP_GetInstalledProduct_OutputVariable" is not defined in any of the WSDL files.
[Potential fix]: Make sure the WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}GetInstalledProductResponse.V1" is defined in one of the WSDLs referenced by the deployment descriptor.
[Error ORABPEL-10007]: unresolved messageType
[Description]: in line 95 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}UpdateInstalledProductRequest.V1" of variable "VariableUpdateIPStatusInputVariable" is not defined in any of the WSDL files.
[Potential fix]: Make sure the WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}UpdateInstalledProductRequest.V1" is defined in one of the WSDLs referenced by the deployment descriptor.
[Error ORABPEL-10017]: unresolved operation
[Description]: in line 963 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", operation "UpdateInstalledProduct" is not defined in portType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}RF_INST_PRODUCT_PortType" of <invoke> "InvokeUpdateInstalledProduct".
[Potential fix]: Make sure the operation "UpdateInstalledProduct" is defined in portType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}RF_INST_PRODUCT_PortType" who      is defined in WSDL "http://192.168.10.203:8020/PSIGW/PeopleSoftServiceListeningConnector/RF_INST_PRODUCT.1.wsdl".
[Error ORABPEL-10017]: unresolved operation
[Description]: in line 1008 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", operation "NotifyOrderShipment" is not defined in portType "{urn:oracle.enterprise.crm.order.service.Order}RO_ORDER_PortType" of <invoke> "InvokeOrderNotify".
[Potential fix]: Make sure the operation "NotifyOrderShipment" is defined in portType "{urn:oracle.enterprise.crm.order.service.Order}RO_ORDER_PortType" who      is defined in WSDL "http://192.168.10.203:8020/PSIGW/PeopleSoftServiceListeningConnector/RO_ORDER.1.wsdl".
[Error ORABPEL-10007]: unresolved messageType
[Description]: in line 1157 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", WSDL messageType "{urn:oracle.enterprise.crm.order.service.Order}RelateServicesToSIMContainer.V1" of variable "InvokeRelateServicesToSIM_RelateServiceToSIM_InputVariable" is not defined in any of the WSDL files.
[Potential fix]: Make sure the WSDL messageType "{urn:oracle.enterprise.crm.order.service.Order}RelateServicesToSIMContainer.V1" is defined in one of the WSDLs referenced by the deployment descriptor.
[Error ORABPEL-10007]: unresolved messageType
[Description]: in line 1158 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", WSDL messageType "{urn:oracle.enterprise.crm.order.service.Order}RelateServicesToSIMResponse.V1" of variable "InvokeRelateServicesToSIM_RelateServiceToSIM_OutputVariable" is not defined in any of the WSDL files.
[Potential fix]: Make sure the WSDL messageType "{urn:oracle.enterprise.crm.order.service.Order}RelateServicesToSIMResponse.V1" is defined in one of the WSDLs referenced by the deployment descriptor.
[Error ORABPEL-10017]: unresolved operation
[Description]: in line 1186 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", operation "RelateServiceToSIM" is not defined in portType "{urn:oracle.enterprise.crm.order.service.Order}RO_ORDER_PortType" of <invoke> "InvokeRelateServicesToSIM".
[Potential fix]: Make sure the operation "RelateServiceToSIM" is defined in portType "{urn:oracle.enterprise.crm.order.service.Order}RO_ORDER_PortType" who      is defined in WSDL "http://192.168.10.203:8020/PSIGW/PeopleSoftServiceListeningConnector/RO_ORDER.1.wsdl".
[Error ORABPEL-10017]: unresolved operation
[Description]: in line 1747 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", operation "CompleteOrder" is not defined in portType "{urn:oracle.enterprise.crm.order.service.Order}RO_ORDER_PortType" of <invoke> "InvokeOrderCompletion".
[Potential fix]: Make sure the operation "CompleteOrder" is defined in portType "{urn:oracle.enterprise.crm.order.service.Order}RO_ORDER_PortType" who      is defined in WSDL "http://192.168.10.203:8020/PSIGW/PeopleSoftServiceListeningConnector/RO_ORDER.1.wsdl".
[Error ORABPEL-10017]: unresolved operation
[Description]: in line 1947 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", operation "GetInstalledProduct" is not defined in portType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}RF_INST_PRODUCT_PortType" of <invoke> "InvokeGetIP".
[Potential fix]: Make sure the operation "GetInstalledProduct" is defined in portType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}RF_INST_PRODUCT_PortType" who      is defined in WSDL "http://192.168.10.203:8020/PSIGW/PeopleSoftServiceListeningConnector/RF_INST_PRODUCT.1.wsdl".
[Error ORABPEL-10017]: unresolved operation
[Description]: in line 1964 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", operation "UpdateInstalledProduct" is not defined in portType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}RF_INST_PRODUCT_PortType" of <invoke> "InvokeUpdateIPStatus".
[Potential fix]: Make sure the operation "UpdateInstalledProduct" is defined in portType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}RF_INST_PRODUCT_PortType" who      is defined in WSDL "http://192.168.10.203:8020/PSIGW/PeopleSoftServiceListeningConnector/RF_INST_PRODUCT.1.wsdl".
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:285)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:804)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:670)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
at sun.reflect.GeneratedMethodAccessor91.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:317)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:339)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)

Unable to deploy a BPEL process with rules

Hi All
I created a very simple BPEL process and defined a business Rule in composite, that I call from within my BPEL process.
I am however not able to deploy the project completely successfully.
I am using JDEV 11g to build/deploy my projects on a SOA_Suite_11g. Note that I can deploy a project successfully if it does not have a business rule.
This is what I see in the 'Deployment Log' tab:
[01:49:17 PM] Deploying profile...
[01:49:17 PM] Wrote SAR file to /Users/satinder/jdeveloper/mywork/ChapterTwo/FLThree/deploy/sca_FLThree_rev1.0.jar
[01:49:17 PM] Deploying sca_FLThree_rev1.0.jar to soa_server1 [redunca.pvo.groundhog.com.au:8001]
[01:49:17 PM] Processing sar=/Users/satinder/jdeveloper/mywork/ChapterTwo/FLThree/deploy/sca_FLThree_rev1.0.jar
[01:49:17 PM] Adding sar file - /Users/satinder/jdeveloper/mywork/ChapterTwo/FLThree/deploy/sca_FLThree_rev1.0.jar
[01:49:17 PM] Preparing to send HTTP request for deployment
[01:49:17 PM] Creating HTTP connection to host:redunca.pvo.groundhog.com.au, port:8001
[01:49:17 PM] Sending internal deployment descriptor
[01:49:17 PM] Sending archive - sca_FLThree_rev1.0.jar
[01:49:19 PM] Received HTTP response from the server, response code=500
[01:49:19 PM] Error deploying archive sca_FLThree_rev1.0.jar to soa_server1 [redunca.pvo.groundhog.com.au:8001]
[01:49:19 PM] HTTP error code returned [500]
[01:49:19 PM] Error message from server:
Error during composite deployment: oracle.fabric.common.FabricDeploymentException: oracle.fabric.common.FabricException: Error occurred during deployment of component: FLI to service engine: implementation.bpel, for composite: FLThree: ORABPEL-01010
Process Generation Failed.
failure to generate the BPEL process file "".
Could not generate named BPEL process file. The exception reported was "/apps/oracle/ofm_11g/user_projects/domains/soa_dev_domain/deployed-composites/FLThree_rev1.0/sca_FLThree_rev1.0/198abebc-19d9-4df6-a712-2122b0b9730a/SCA-INF/FLI.lock (Too many open files)".
Ensure that the file "" is a valid file to be generated.
: Error occurred during deployment of component: FLI to service engine: implementation.bpel, for composite: FLThree: ORABPEL-01010
Process Generation Failed.
failure to generate the BPEL process file "".
Could not generate named BPEL process file. The exception reported was "/apps/oracle/ofm_11g/user_projects/domains/soa_dev_domain/deployed-composites/FLThree_rev1.0/sca_FLThree_rev1.0/198abebc-19d9-4df6-a712-2122b0b9730a/SCA-INF/FLI.lock (Too many open files)".
Ensure that the file "" is a valid file to be generated.
[01:49:19 PM] Check server log for more details.
[01:49:19 PM] #### Deployment incomplete. ####
[01:49:19 PM] Error deploying archive file:/Users/satinder/jdeveloper/mywork/ChapterTwo/FLThree/deploy/sca_FLThree_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Any ideas..
Thanks

"Too many open files" issue is most likely because of a (few) Sun JDK6 bug(s). These bugs may not even get fixed in JDK6. It could hit at runtime or compile time depending on the number of jar files getting used and/or a few other variations around the use of file descriptors at a time by the JDK/JRE. One can use "lsof -p <pid>" command on Linux and see how the File Descriptors are growing when this issue is seen. E.g. use the pid of junit java process and not the main Ant java process if you want to debug at runtime. For compile time, grep on the compiler process.
Increasing the limit of file descriptors is used as a workaround.
How to increase per-process per-user file descriptor limit on your Linux hosted box:
Using "limit" (csh) or "ulimit" (bash) command find out what is the value of "descriptors". As a root user (use sudo) edit /etc/security/limits.conf file.
Close your x term and re-open (or re-connect your NX client) for this change to take effect. System re-start should not be required. If you are not able to increase the limit for some reason using these steps, try a few other things like re-starting your VNC server (or something similar), re-start your Linux box.

Development and Deployment of BPEL processes in ALBPM 6.0

All,
I tried to develop a simple BPEL 2.0 process in ALBPM 6.0 and noticed that the tool does not generate an endpoint automatically to expose the BPEL as a web service. I had to create my own bidning and the service interface to get rid of a bunch of compile errors. I typed my address for the BPEL manually as 'http://localhost:9000/bpel'. I reloaded the server, but could not find a service at this address.
What are the correct steps of creating a BPEL process so that it deploys correctly and can be called externally as a web service?
Any help is very much appreciated. Thanks in advance!

Ok. The WSDL actually published, but when I tried to invoke it from ALBPM process on another engine I got this error:
Caused by: java.lang.AssertionError: Could not retrieve name
at fuego.soaptype.SoapCall.initCallArguments(SoapCall.java:172)
at fuego.soaptype.SoapCall.<init>(SoapCall.java:94)
etc...
What is the correct process for generating WSDLs for BPEL processes with ALBPM 6.0? Can WSDL location address be generated automatically? What does "Could not retrieve name" error relate to?

Deploying a BPEL process for testing in JDeveloper

Similar Messages

Maybe you are looking for