Deploying a C 60 codec in standalone mode

Hi team,
I have a customer scenario where I need to integrate a C 60 into a customers existing conferencing infrastructure, but the c 60 is meant to be at the conference room , I will like to know what configs will be done on the switch that connects directly to the C 60 as well as what configs to put on the voice gateway in preparation for a hitch free video conferencing experience between this branch and other branches on the WAN as well as conferencing with people outside the companies network.
I look forward to assistance.
Regards
Pithogoil
Sent from Cisco Technical Support iPad App

Hi Pithogoil,
This forum is primarily for the CWMS and MP technologies. I suggest reposting this question to the TelePresence section of the Collaboration, Voice and Video community.
Thanks,
Derek Johnson
Conferencing TAC

Similar Messages

SQR - Production reporting deployment in standalone mode

Hi,
I am an essabse developer/admin , and never worked with SQR - production reporting. Now here is an urgent need of an upgrade from version 8 to 9 or 11 for this tool. When i read the oracle documentation they say, we need workspace and HSS. But my question is can we deploy sqr - production reporting in standalone mode like how we do for essbase.
Also if any body has installed , any answer can be helpful thanks!!
Thanks in advance

you can install the PR-client/ PR-studio only. All pure SQR/ PR functionality is in it. But off course you can not mke use of the job and publish functionality.
There is also commandline utilty to overcome most of the missing parts.
good luck. Detlev
Edited by: Detlev on Apr 21, 2010 10:40 PM

Error while trying to start oc4j 11g in standalone mode

I get this error while trying to start oc4j 11g (that comes with JDeveloper 11g Technical Preview 2 ) in standone mode. Any ideas ?
Sep 17, 2007 6:29:21 PM com.sun.faces.spi.InjectionProviderFactory createInstance
INFO: jsf.core.injection.provider_generic_web_configured
Sep 17, 2007 6:29:23 PM org.apache.myfaces.trinidad.component.UIXComponentBase _createType
SEVERE: Could not load type properties
java.lang.NullPointerException
at oracle.classloader.PolicyClassLoader.findLocalClass(PolicyClassLoader.java:1491)
at oracle.classloader.SearchPolicy$FindLocal.getClass(SearchPolicy.java:226)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.SearchPolicy.loadClass(SearchPolicy.java:852)
at oracle.classloader.PolicyClassLoader.askParentForClass(PolicyClassLoader.java:1315)
at oracle.classloader.SearchPolicy$AskParent.getClass(SearchPolicy.java:72)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.SearchPolicy.loadClass(SearchPolicy.java:852)
at oracle.classloader.PolicyClassLoader.askParentForClass(PolicyClassLoader.java:1315)
at oracle.classloader.SearchPolicy$AskParent.getClass(SearchPolicy.java:72)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.SearchPolicy.loadClass(SearchPolicy.java:852)
at oracle.classloader.PolicyClassLoader.askParentForClass(PolicyClassLoader.java:1315)
at oracle.classloader.SearchPolicy$AskParent.getClass(SearchPolicy.java:72)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.SearchPolicy.loadClass(SearchPolicy.java:852)
at oracle.classloader.PolicyClassLoader.askParentForClass(PolicyClassLoader.java:1315)
at oracle.classloader.SearchPolicy$AskParent.getClass(SearchPolicy.java:72)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1681)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1642)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1627)
at org.apache.myfaces.trinidad.component.UIXComponentBase._createType(UIXComponentBase.java:1393)
at org.apache.myfaces.trinidad.component.UIXComponentBase.<clinit>(UIXComponentBase.java:96)
at oracle.adfinternal.view.faces.renderkit.rich.DialogRenderer.<init>(DialogRenderer.java:34)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:1024)
at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:1096)
at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:505)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:398)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1285)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:856)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:473)
at com.evermind.server.Application.getHttpApplication(Application.java:753)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:2039)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1958)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:645)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:289)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2747)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1255)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:129)
at java.lang.Thread.run(Thread.java:595)
07/09/17 18:29:26 Oracle Containers for J2EE 10g (11.1.1.0.0) initialized
Thanks
Ramesh

Using the OTN2 tech preview build 4684 now available on OTN, I used the JDEVHOME/jdev/bin/start_oc4j script to startup the embedded server in standalone mode and cannot reproduce these errors.
Can you try with build 4684 from OTN and see if the same issue still reproduces?
If so, does it occur even before ever deploying any applications of your own to the instance?

Error while trying to start OC4j11g in standalone mode

I get the following error while trying to start OC4j 11g 11.1.1 in standalone mode:
Error initializing server: Shared library "oracle.fabric.runtime" could not be found.
FYI, I have the imports for oracle.fabric, oracle.fabric.interceptors in server.xml already.
Any thoughts?
Thanks
Ramesh

I deployed the map example app that Oracle posted online (GEOTAGS - Oracle Open World Conference in 2007) on the JDeveloper's embeded OC4J 11g Tech Preview 3. The deployment went well. However, it doesn't seem to work when I go to the main.jsp (http://localhost:8888/geotags/main.jsp). The following is the error. Please tell me what I need to do to solve this problem.
C:\jdeveloper11\jdev\bin>rem ===================================================
========================
Starting OC4J with command: "C:\devtools\Java\jdk1.5.0_14\\bin\java.exe" -XX:Max
PermSize=512m -jar oc4j.jar
Apr 4, 2008 5:23:57 PM oracle.j2ee.xml.XMLMessages warningException
WARNING: Exception Encountered
08/04/04 17:24:05 WARNING: ApplicationServer.enableOC4JDocumentChangeNotifier Al
ternate DocumentChangeNotifier in use!
08/04/04 17:24:05 JMS server will listen on port 9127.
08/04/04 17:24:06 oracle.j2ee.jms.oc4j.JMSServer startup complete
08/04/04 17:24:08 Don't know how to map non-serializable type: interface javax.m
anagement.j2ee.statistics.Stats to Open MBean Type.
08/04/04 17:24:09 WARNING: J2EE JNDI-00002
08/04/04 17:24:09 WARNING: No javax.jms.ConnectionFactory found at null
08/04/04 17:24:12 WARNING: oracle.j2ee.jmsrouter.RouterException: JMS Destinatio
n, {0}, does not exist
08/04/04 17:25:03 Oracle Containers for J2EE 11g (11.1.1.0.0) initialized.
08/04/04 17:32:29 geotags: JspServlet error: Servlet unable to dispatch to the f
ollowing requested page: The following exception occurred:oracle.jsp.parse.JspPa
rseException: /main.jsp: Line # 4, <%@ taglib uri="http://java.sun.com/jsf/core"
prefix="f"%>
Error: Internal error, registered Directive handlers MUST descend from JspDirect
ive or one of its subclasses: {0}
08/04/04 17:32:29 Unable to dispatch JSP Page : The following exception occurred
:oracle.jsp.parse.JspParseException: /main.jsp: Line # 4, <%@ taglib uri="http:/
/java.sun.com/jsf/core" prefix="f"%>
Error: Internal error, registered Directive handlers MUST descend from JspDirect
ive or one of its subclasses: {0}

How to run oracle cm sdk examples in a standalone mode?

I encountered some difficulty on how to run the examples provided by CM SDK Developer's Guide,such as SimpleConnection.I deployed my develop enviroment in two computers,installed only oracle JDeveloper in one computer,while installed Oracle10g,Oracle AS and Oracle CM SDK on the other computer.But when I tried to run the example on the computer which was only installed Oracle JDeveloper,I always failed.I have no idea of how to run the example in a standalone mode.I hope someone who familiar with Oracle CM SDK can help me solve the problem or give me some advice.Now I list the errors which appeared when I ran the example,SimpleConnection.
C:\Oracel JDeveloper904\jdk\bin\javaw.exe -ojvm -classpath C:\Oracel JDeveloper904\jdev\mywork\Workspace2\Project1\classes;C:\Oracel JDeveloper904\jdev\lib\jdev-rt.jar;C:\ias\cmsdk.jar;C:\ias\uix2.jar;C:\ias\classes12.jar;C:\ias\emPid.jar -DIFS.DOMAIN.Name=ifs://zhao:1521:zyh:IFSSYS -DIFS.STANDALONE.Mode=true -DIFS.SCHEMA.PASSWORD=manage oracle.ifs.examples.devdoc.connection.SimpleConnection
Connecting...
oracle.ifs.common.IfsException: IFS-20102: Unable to start service (IfsDefaultService)
oracle.ifs.common.IfsException: IFS-20010: Unable to get service configuration properties (SmallServiceConfiguration)
java.sql.SQLException: Io Òì³£: The Network Adapter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:231)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:345)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:431)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:515)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:345)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.ifs.beans.LibraryService.getServiceConfigurationProperties(LibraryService.java:618)
at oracle.ifs.beans.LibraryService.getServiceConfigurationProperties(LibraryService.java:503)
at oracle.ifs.beans.LibraryService.startService(LibraryService.java:366)
at oracle.ifs.examples.devdoc.connection.SimpleConnection.main(SimpleConnection.java:17)
Process exited with exit code 0.

The CMSDK uses the oci8 interface to connect to the database. The classes12.jar file has to correspond to the appropriate ocijdbc9.dll file; and the ocijdbc9.dll file is dependent on about 26 other DLLs beginning with oci*.dll and ora*.dll.
I've found that the 10.1.0 and 9.2.0 database client releases contain the wrong oci*.dll family (at least for JDeveloper) and I use the 9.0.4 AS Client tree in my path when I work with CMSDK.
My quick test is to see if I can connect to my database using JDeveloper Connect DBMS with the oci8 connection method. This seems to put out some reasonable error messages explaining why it failed, e.g. it tells you that it couldn't find the right DLL dependency.

ISE 1.2 Standalone Mode

Hi Experts,
Good day!
I just want to clarify if I can provide posture assessment in ISE 1.2 even if it is in standalone mode because some said I can but based on my understandings of ISE since 1.1.4, I need to convert it first to an IPN mode for it to provide posture assessment.
Please help, I'm a little bit confused.
thanks,
niks

ISE standalone node can provide posture service, you need to make sure you have advanced license on ISE. IPN is for NAD that do not support COA.
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_man_license.html
http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_0100.html

Apex Listener in standalone mode, how to set/reset db connection.

Sometime ago I installed Apex Listener for testing, then I removed it.
Now I downloaded last version, installed it in standalone mode and try to set the DB connection.
However when I try to edit in listenerAdmin page the db connection parameters I can't : they are greyed and report the connection informations I gave in my first test installation.
How can I change them ?
How can I avoid all fields in listenerAdmin greyed ?
Tks
Tullio

Hello Tullio,
you can run /listenerConfigure/ only as long as there is no configuration available. The database parameters can only be setup when the APEX Listener is not connected due to the state of its connection pool. Once it is established, you can only configure it offline by editing the apex-config.xml . That's why the parameters are greyed out in /listenerAdmin/.
You probably only removed the war file of your test installation, but not the apex.home including the apex-config.xml that is stored in there. So your new installation found the old home and reused the connection.
You could either edit the apex-config.xml or delete the apex.home and rerun /listenerConfigure/
If you run on a windows system, you'll find the apex.home in your users TEMP, usually located in the temp folder underneath the local settings of your user profile. The directory to locate is now called "apex".
-Udo

Adobe Reader 9.5.4.268 shows a search button in embedded but not in standalone mode

Ever since Adobe Reader was updated to the "new" look I could not figure out how to search PDFs. The previous version had a convenient "find" field in the toolbar. I visited the http://kb.mozillazine.org/Adobe_Reader page, which provides a link to the test PDF at http://plugindoc.mozdev.org/testpages/pdf.html.
Surprisingly, the embedded PDF shows a magnifying glass button which provides access to the search functions. However, this button is missing when the same test PDF is opened in a standalone mode within the browser (Firefox 20.0.1).
Why the difference and is there a place to customize the Adobe Reader toolbar?

You are most likely using the built in PDF reader in Firefox, not Adobe Reader. [[Use the Adobe Reader plugin to view or download PDF files]] can help you switch back to Adobe (which you should update to version 11 BTW)

Can I configure Cisco 1602i (AIR-CAP1602I-T-K9) in Standalone mode ?

Hi everybody, please, i need some help here.
I bought 3 Cisco 1602i (AIR-CAP1602I-T-K9) but I didn't bought a Controller. How can I configure then in Standalone mode ?
I Saw in other forums, i need to change the IOS Software to an Autonomous Software. They suggested the ap1g2-k9w7-tar.152-4.JA1.tar. I would like to know if it is the right software and if there is any problem with licensing if i download and use it.
Explanation of the differences between AIR-CAP-1602i-x-K9 e AIR-SAP-1602i-x-K9
http://community.spiceworks.com/topic/448208-cisco-aironet-1602i-questions-issues
How to convert to IOS autonomous
http://www.experts-exchange.com/Networking/Wireless/Q_28245190.html
IOS Download:
http://software.cisco.com/download/release.html?mdfid=284366503&softwareid=280775090&release=15.2.4-JA1&flowid=37523
Thanks.
Wesley

Hi,
Yes you must need to change to autonomous mode.Yes it is the right software and you will not face any problem regarding license.
But for download the autonomous AP image from cisco you need a CCO (Cisco login) and valid service contract .
Here is the latest image:Can download from here
http://software.cisco.com/download/release.html?mdfid=284366503&flowid=37523&softwareid=284180979&release=15.2.4-JB5&relind=AVAILABLE&rellifecycle=ED&reltype=latest
How to covert from lAP to autonomous :
http://www.youtube.com/watch?v=QQ_NuxdRhQ4
http://rscciew.wordpress.com/2014/05/07/access-point-conversion-lap-to-aap-and-vice-versa/
Regards
Dont forget to rate helpful posts

Can a Flexconnect (h-reap) survive reload while in standalone mode

I have searched and asked round for this the last weeks. Can't find the answer.
When a flexconnect is in standalone mode (WAN down) what happens if the AP is reloaded?
Is it possible to make a setup with i.e. WPA/PSK where the AP keeps working after a reload in standalone mode ?
Chears
Rasmus

When a flexconnect is in standalone mode (WAN down) what happens if the AP is reloaded?
When your WAN link(s) goes down and your FlexConnect (H-REAP) WAP reboots, it will not service anything/anyone.

Minimize a window in Standalone mode

hi,
How to minimize a browser window or force the window to lost
the focus in standalone mode?
The window is open with the getURL command
(getURl("www.adobe.com","_blank","Post").
Thanks
Maurício

It's only a guess but I don't think Flash can do that. So
many things in Flash aren't made for security purposes. Too bad :/.
But this is only a guess. I'm not sure if it can actually
change focus and force on it. If there is something to control the
SAPlayer, it would be in fscommand but there's nothing to control
this. Sorry.

Starting the opmn managed OC4J in standalone mode ?

Hi All,
I have installed Oracle 10.1.3 production version of the applicartion server.
i use opmn to start the server "opmnctl startall"
by starting oc4j in this manner i am unable to get thread dumps, so i tried to start the server in standalone mode by using " java -jar oc4j.jar" but it fails to start throwing an error "unable to start HTTP Server" default website configuration may not be valid: Fatal error: server exiting
Please help
Thanks
Raghavendra

Deepak,
Thanks for replying
i am basically into performance engineering. in our team we basically put the application on a production environment and test for Performace scalability reliability etc now i need thread dumps at one particular load which can only be simulated in a large production environment.
Today i googled a lot and found some methods
1. A tool called Stacktrace.exe which allows to get thread dumps from java processes started as windows service
-----but this is not working for me since intenet is blocked on my app server and this tool can only be run online
2. their are a couple of free ware utilities which allow to get stack trace by giving input as PID ---here also i could not get, bcos of some of issue with user rights
3. unixtool utility which runs on window--basically has unix commands simulated on windows--this allows to send kill -3 signal
4. Last method--use JRockit JVM and get thread dumps from the JRockit Management console
Thanks
Raghavendra

Stackpower switches show in standalone mode

Hi,
I have a stack of 8 3750x switches connected via Stackwise. In addition, I have these switches configured as two Powerstacks. When I look at the Powerstacks, they are showing as being in power-sharing mode. When I look at the individual switches, they show as standalone.   Right now, I have 1 switch in each powerstack that has two power supplies, and then the other three have a single power supply. Below is the output for "Show stack-power detail" as well as the Powerstack configurations.
Power Stack           Stack   Stack    Total   Rsvd    Alloc   Unused Num Num
Name                  Mode    Topolgy Pwr(W) Pwr(W) Pwr(W) Pwr(W) SW   PS
Powerstack_1          SP-PS   Ring     2145    45      570     1530    3    3
Powerstack_2          SP-PS   Ring     2860    60      760     2040    4    4
Powerstack_1-1        SP-PS   Stndaln 1430    520     190     720     1    2
Power stack name: Powerstack_1
    Stack mode: Power sharing
    Stack topology: Ring
    Switch 4:
        Power budget: 700
        Power allocated: 190
        Low port priority value: 20
        High port priority value: 11
        Switch priority value: 2
        Port 1 status: Connected
        Port 2 status: Not connected
        Neighbor on port 1: Switch 3 - e4d3.f15c.6880
        Neighbor on port 2: 0000.0000.0000
    Switch 2:
        Power budget: 700
        Power allocated: 190
        Low port priority value: 21
        High port priority value: 12
        Switch priority value: 3
        Port 1 status: Not connected
        Port 2 status: Connected
        Neighbor on port 1: 0000.0000.0000
        Neighbor on port 2: Switch 3 - e4d3.f15c.6880
    Switch 3:
        Power budget: 700
        Power allocated: 190
        Low port priority value: 22
        High port priority value: 13
        Switch priority value: 4
        Port 1 status: Connected
        Port 2 status: Connected
        Neighbor on port 1: Switch 2 - 6073.5c53.df80
        Neighbor on port 2: Switch 4 - 6073.5c51.dd00
Power stack name: Powerstack_2
    Stack mode: Power sharing
    Stack topology: Ring
    Switch 8:
        Power budget: 700
        Power allocated: 190
        Low port priority value: 20
        High port priority value: 11
        Switch priority value: 2
        Port 1 status: Connected
        Port 2 status: Connected
        Neighbor on port 1: Switch 7 - e4d3.f15e.fd80
        Neighbor on port 2: Switch 5 - e4d3.f12d.2c00
    Switch 6:
        Power budget: 700
        Power allocated: 190
        Low port priority value: 21
        High port priority value: 12
        Switch priority value: 3
        Port 1 status: Connected
        Port 2 status: Connected
        Neighbor on port 1: Switch 5 - e4d3.f12d.2c00
        Neighbor on port 2: Switch 7 - e4d3.f15e.fd80
    Switch 7:
        Power budget: 700
        Power allocated: 190
        Low port priority value: 22
        High port priority value: 13
        Switch priority value: 4
        Port 1 status: Connected
        Port 2 status: Connected
        Neighbor on port 1: Switch 6 - e4d3.f15e.c400
        Neighbor on port 2: Switch 8 - e4d3.f15a.4100
    Switch 5:
        Power budget: 700
        Power allocated: 190
        Low port priority value: 19
        High port priority value: 10
        Switch priority value: 1
        Port 1 status: Connected
        Port 2 status: Connected
        Neighbor on port 1: Switch 8 - e4d3.f15a.4100
        Neighbor on port 2: Switch 6 - e4d3.f15e.c400
Power stack name: Powerstack_1-1
    Stack mode: Power sharing
    Stack topology: Standalone
    Switch 1:
        Power budget: 910
        Power allocated: 190
        Low port priority value: 22
        High port priority value: 13
        Switch priority value: 4
        Port 1 status: Shut
        Port 2 status: Shut
        Neighbor on port 1: 0000.0000.0000
        Neighbor on port 2: 0000.0000.0000
stack-power stack Powerstack_1
stack-power stack Powerstack_2
stack-power switch 1
stack Powerstack_1
switch mode: standalone
stack-power switch 2
stack Powerstack_1
switch mode: standalone
stack-power switch 3
stack Powerstack_1
switch mode: standalone
stack-power switch 4
stack Powerstack_1
switch mode: standalone
stack-power switch 5
stack Powerstack_2
switch mode: standalone
stack-power switch 6
stack Powerstack_2
switch mode: standalone
stack-power switch 7
stack Powerstack_2
switch mode: standalone
stack-power switch 8
stack Powerstack_2
switch mode: standalone

Cosmetic bug
CSCui21029    3750X Stack no standalone stays in running configureation as standalone
Symptom:
When you are configuring a 3750x stack and initially putting it into a stack ring topology by configuring the following.
Switch(config)#stack-power switch 1
Switch(config-switch-stackpower)#sta
Switch(config-switch-stackpower)#no stan
Switch(config-switch-stackpower)#no standalone
You will see that in the running configuration it shows up as standalone mode
stack-power switch 1
switch mode: standalone
stack-power switch 2
switch mode: standalone
Conditions:
3750X stacks with any license level
Workaround:
none

OCMS & Communicator connection in Standalone mode

I have problems in connecting OCMS to Communicator. Here is what I did:
1. Installed OCMS in standalone mode, with SIP container, Presence Server and Presence Webservices ONLY (I am only interested in presence server)
2. Installed Communicator
3. Started OCMS, it comes up successfully
4. Started Communicator
Everything is on my local PC. But when I start Communicator, it just sits there, with the message "Trying to connect to <my domain>"
Can someone please help ?
Thanks
-G

If your OCMS instance is on the same machine as your Communicator, you may be experiencing known loopback problems. To fix the issue, first
1. Close all your Communicator clients.
2. go to your Communicator account settings, typically in C:\Documents and Settings\<windows-user>\Application Data\Oracle Communicator\Accounts\<communicator-user>.xml
3. Set <NetDetectionEnabled>0</NetDetectionEnabled>
4. Save the file and restart Communicator.
Hope this helps,
Adam

Enable neon in standalone mode of zynq board

Hello everyone,
I'm trying to develop a simple applicaiton to process some float matrix data on a zynq board in standalone mode, and I want to use neon to speed up the float data processing, below is my operation:
1. add compiler flag "-mcpu=cortex-a9 -mfloat-abi=hard -mfpu=neon" in my application compiler, an error occured when build:
  error: ./src/helloworld.o uses VFP register arguments, arm0_app.elf does not
2. I think this error is because of my bsp don't support hardware float (my application is managed to running on arm0 and based on the fsbl bsp), so I tried to enable hard float in my bsp by adding the above complier flag to the "extra_compiler_flag" of the bsp, and I met a new error:
"Compiling standalone"
arm-xilinx-eabi-gcc: error: -mfloat-abi=soft and -mfloat-abi=hard may not be used together
I found that the default setting of build platform library standalone is as below
(in file: $\ps7_cortexa9_0\libsrc\standalone_v3_10_a\src\Makefile):
ECC_FLAGS    += -march=armv7-a \
             -mfloat-abi=soft \
             -mfpu=neon
seems the default setting of standalone is soft float, and this Makefile is produced automatically, I could not modify it directly, can somebody help me to fix the issue, or you can just tell me how to modify the Makefile to support hard float?
Thank you very much!

Leo,
There was a glimmer of hope that was quickly dashed.
Switch 1 (now disconnected from stack with cable between stack port 1 and 2) booted, ran for 30 -120 seconds then got the same %Software-forced reload.
I had something going on in there so I have formatted the flash: file system from the bootloader prompt. I'm sending xmodem xfer again to see if there might have been some random 'ghost' due to numerous power outages / crashes etc..
I'll keep trying for now.

Deploying a C 60 codec in standalone mode

Similar Messages

Maybe you are looking for