Deploying application on managed server

Hi All,
I am using Weblogic 6.1sp1 on windows 2000.
I have 2 servers
server name type port
myserver - admin server 7001
vijay - managed server 19001
when i start myserver & then vijay(managed server) It starts ok works fine.But
if try to deploy application on managed server & then try to restart both my managed
server just hangs by giving message.
Starting WebLogic Server ....
Connecting to http://localhost:7001...
<Jan 24, 2002 12:18:04 PM EST> <Notice> <WebLogicServer> <Starting WebLogic Managed
Server "vijay" for domain "mydomain">
It doesn't throw any exceptions but it just hangs.
so will u able to guide me on this.
Thanx
Vijay

Vijay,
are you using the node manager and starting the server from the admin console?
The node manager starts this as a process and sometimes the process is not getting
killed. try to kill the previously started process and it should work fine
ANIL
"vijay" <[email protected]> wrote:
>
Hi All,
I am using Weblogic 6.1sp1 on windows 2000.
I have 2 servers
server name type port
myserver - admin server 7001
vijay - managed server 19001
when i start myserver & then vijay(managed server) It starts ok works
fine.But
if try to deploy application on managed server & then try to restart
both my managed
server just hangs by giving message.
Starting WebLogic Server ....
Connecting to http://localhost:7001...
<Jan 24, 2002 12:18:04 PM EST> <Notice> <WebLogicServer> <Starting WebLogic
Managed
Server "vijay" for domain "mydomain">
It doesn't throw any exceptions but it just hangs.
so will u able to guide me on this.
Thanx
Vijay

Similar Messages

Deploying application on Virtual Server

I am having a virtual server set up by my department on which i can't install anything. I want to use flash builder for my database project of which I am designing front end in flash builder.
I tried to create same mysql environment on my machine as it is on virtual server. I developed front end which retrieves content from one of the table and display it.
But when I copied the output folder to my virtual server, my application failed with the following error.
Send failed
Channel.Connect.Failed error NetConnection.Call.Failed: HTTP:
I would appreciate any suggestions.

Vijay,
are you using the node manager and starting the server from the admin console?
The node manager starts this as a process and sometimes the process is not getting
killed. try to kill the previously started process and it should work fine
ANIL
"vijay" <[email protected]> wrote:
>
Hi All,
I am using Weblogic 6.1sp1 on windows 2000.
I have 2 servers
server name type port
myserver - admin server 7001
vijay - managed server 19001
when i start myserver & then vijay(managed server) It starts ok works
fine.But
if try to deploy application on managed server & then try to restart
both my managed
server just hangs by giving message.
Starting WebLogic Server ....
Connecting to http://localhost:7001...
<Jan 24, 2002 12:18:04 PM EST> <Notice> <WebLogicServer> <Starting WebLogic
Managed
Server "vijay" for domain "mydomain">
It doesn't throw any exceptions but it just hangs.
so will u able to guide me on this.
Thanx
Vijay

Error 401--Unauthorized when deployed on WL Managed server (10.3.3)

Hi,
I created & started a WL-Managed server on my window desktop machine. I deployed to this Managed server, an application which is running without problem on Admin Server. (The managed server is created in the same Domain as that of Admin Server)
However, when I log on to the application on Managed server & enter the UID & PW I get the Error 401--Unauthorized page. The same security works perfectly well for Admin Server.
Any clues what could be going wrong.
Thanks in advance.
Edited by: Prakash Chavan on Feb 28, 2011 4:57 PM

Thanks Faisal,
Here is the log after I add the 2 flags
<Mar 1, 2011 8:59:30 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to RUNNING>
<Mar 1, 2011 8:59:30 AM EST> <Notice> <WebLogicServer> <BEA-000360> <Server star
ted in RUNNING mode>
Mar 1, 2011 9:13:27 AM oracle.jbo.uicli.mom.CpxUtils$Visitor logMainApplicationC
px
INFO: zip:C:/JDev11g/Middleware/user_projects/domains/base_domain/servers/Svr0/t
mp/_WL_user/TestTrackApp_V2.0/77qs7f/war/WEB-INF/lib/_wl_cls_gen.jar!/view/DataB
indings.cpx
[JpsAuth] Check Permission
PolicyContext: [TestTrackApp#V2.0]
Resource/Target: [view.pageDefs.ttsPageDef]
Action: [view]
Permission Class: [oracle.adf.share.security.authorization.RegionP
ermission]
Result: [FAILED]
For more information on this failure, please set -Djps.auth.debug.verb
ose=true
I have emailed you the requested log & the config files.
Edited by: Prakash Chavan on Mar 1, 2011 9:35 AM

Deploy to single managed server checked and greyed out while performing upgrade to EPM 11.1.2.4

Hi Gurus,
We are trying to upgrade EPM from 11.1.2.2 to EPM 11.1.2.4 and have applied the maintenance release successfully.
Issue:
When we are trying to configure EPM 11.1.2.4 and are providing the same Shared Service database details, at the summary screen, we are not able to uncheck the option "Deploy to Single Managed server" which is checked and is greyed out.
We have tried the following:
1. We updated the HSS_COMPONENT_PROPERTY_VALUE table and updated the PROPERTY_NAME "isCompact" to false.
2. Modified the config.xml file located at EPMSystem/config and epmsystem1/config to remove the property for compactState.
We are still having the issue where we are not able to uncheck the option for Compact Deployment. Any help would be appreciated.
Thanks in advance.

As it is a maintenance release and it deployed as a single managed server then you will not be able to change the deployment type when applying the maintenance release.
There is a procedure to change a deployment type from compact to single managed server that I created as an internal document.
you may want to give it a go but you would need to test this first as this was an in house test that I carried out.
Hyperion Planning - Version 11.1.2.2.300 and later
Information in this document applies to any platform.
Goal
The scenario:
EPM system 11.1.2.3 was configured and deployed as a single managed server compact deployment so that only one JVM was used for all products EPMServer0.
Later on, due to performance issues, the decision was made to go for using a JVM for each product and get rid of the compact deployment.
The administrator went ahead and redeployed the application servers individually into their own JVM.
However everytime the webserver is reconfigured, the weblogicCluster entry in the OHS file mod_wl_ohs has 2 servers, one for EPMSserver running on port 9000 and another server running on the product default port (as if it was being load balanced)
The aim:
It is clear that initial compact deployment has not been cleared from the EPM environment and the aim in this exercise is to clear the registry and the file system so that the compact deployment is removed fromthe EPMenvironment and we are left with the desired configuration Single JVM deployment for earch web application.
Solution
Caution:
Make sure that you take a backup of the following:
- TheFoundation Services database schema backup
- Take a backup of the following folders:
\Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component
\Oracle\Middleware\user_projects\domains\EPMSystem\servers
\Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig\servers
Disclaimer:
This was tested in House and it worked for this specific environment and it may not work for your environment. So the suggestion is to test first in a development environment and make sure that you take the appropriate backups in case it does not go according to plan.
Use at your own discretion.
Procedure:
1- Run the epmsys_registry to generate the Registry report
2- Search through the report for the word applicationServerDeployment with a corresponding value of configured and take the ObjectID number down for any entry of applicationServerDeployment that has a value of Configured
i.e:
Instance Tasks Configuration (INSTANCE_TASKS_CONFIGURATION)
Object ID:   e4b3a86a82c26941S32ef81a1455fe48473S7adf
3- use the object ID of each entry you have taken down throughout the Registry HTML Report to manually set it back to Pending using the following procedure:
                Start a command prompt and set the working directory to
                 \Oracle\Middleware\user_projects\epmsystem1\bin
                run the command:
                 epmsys_registry.bat updateproperty #e4b3a86a82c26941S32ef81a1455fe48473S7adf/@applicationServerDeployment=Pending
                Repeat this command for each ObjectID that has its applicationServerDeployment
                 property set to Configured
4- rerun the epmsys_registry.bat to generate the Registry HTML report and search for applicationServerDeployment in the newly generated report to make sure that they are all set to Pending and there none missed (very Important).
5- Search the registry HTML report this time for EPMServer0 which is the default serverName given to the single managed server deployment (there will be multiple entries)
Take note of the first ObjectID entry in the section header: for example
WORKSPACE_WEBAPP (WORKSPACE_WEBAPP)
Object ID:   e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Start a command prompt and set the working directory to
                 \Oracle\Middleware\user_projects\epmsystem1\bin
- run the command:
                 epmsys_registry.bat view #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
-Note the Parents ID in the output:
For example:
Parent 1
NAME - WORKSPACE_LWA
ID - e4b3a86a82c26941S32ef81a1455fe48473S7bd0
TYPE - LOGICAL_WEB_APP
Parent 2
NAME - HOST:BACHVMPS3TR
ID - e4b3a86a82c26941S32ef81a1455fe48473S7ffe
TYPE - HOST
- Note the single child ID:
For Example:
Child 1
NAME - WebLogic 10
ID - e4b3a86a82c26941S32ef81a1455fe48473S7fd6
TYPE - APP_SERVER
Now run the following command to remove the Link between Parent and child:
epmsys_registry removelink #parentObjectID #childObjectID
In this example that would translate to:
To remove the single child1 link to the WORKSPACE_WEBAPP (#e4b3a86a82c26941S32ef81a1455fe48473S7bd3 ):
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7bd3 #e4b3a86a82c26941S32ef81a1455fe48473S7fd6
And do the following To remove the link between WORKSPACE_WEBAPP (#e4b3a86a82c26941S32ef81a1455fe48473S7bd3 ) and Parent1 and Parent2:
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7bd0
#e4b3a86a82c26941S32ef81a1455fe48473S7bd3
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7ffe
#e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Now that the link has been removed, delete the WORKSPACE_WEBAPP component using its ObjectID :
epmsys_registry deletecomponent #parentObjectID
In this example:
epmsys_registry deletecomponent #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Delete also the Parent representing the WORKSPACE_LWA
epmsys_registry deletecomponent #e4b3a86a82c26941S32ef81a1455fe48473S7bd0
Note:So we have now deleted the WEBAPP and LWA for workspace.
6- Repeat steps in section No 5 for every WEBAPP with EPMServer0
7- Start the Weblogic admin console and login
Then go to the left panel and Expand Environment -> Server
Click on Lock & Edit -> Select EPMServer0 -> click on Delete and confirm
Activate Changes and Log off
8- Stop the weblogic admin console server
9- Go to the following location and delete the folder EPMServer0:
\Oracle\Middleware\user_projects\domains\EPMSystem\servers
Delete also EPMServer0 from the following location:
\Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig\servers
10- Start a command prompt and delete the Windows service that was created for EPMServer0 (if using Microsoft Windows Operating System):
Right click on the service 'OracleHyperion EPM Server - Java Web Application (epmssystem1)' and get its service name i.e: HyS9EPMServer_FOUNDATION1
Run the following command: sc delete HyS9EPMServer_FOUNDATION1
11- Launch the EPMSystem configurator and redeploy the web application server to their own JVM
12- Go to the following location \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component and rename the file mod_wl_ohs.conf to mod_wl_ohs.conf.old.
13- Copy the unconfigured mod_wl_ohs.conf file from the location C:\Oracle\Middleware\ohs\ohs\conf to the location \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component
14- Run the EPM System Configurator again and configure the WebServer to reconfigure the OHS configuration file mod_wl_ohs.conf.
Once done then open the mod_wl_ohs.conf file and make sure that there are no servers configured with Port 9000.
15- Start the services and test the workspace

EPM 11.1.2.x deployment to single managed server

Hi Gurus,
I have 2 questions:
1) If we install some applications on single port number:9000(deploy to single managed server), after that if we deploy some applications to individual ports. is this installation work?
2) for example we have installed and configured all applications to single managed server:9000. Now can we change this to individual port numbers??
I mean can we configure all application to individual port numbers??
Just asking with curiosity to know about this scenarios.
Thanks,
mady

Hi Pablo,
Hope you are doing good. In Starting of Carrer on Hyperion, JohnGoodwin and Your replies on the Forum was very helpful to me. Nowadays,you are busy i think, and we are not getting more responses from you .
Pablo wrote:
If what you're trying to do is deploy everything to 9000, test that and then deploy everything to its own managed server, the answer is yes you can but you need to re-run the OHS configuration at the end everytime as it will need to update the mod_wl_ohs.conf file to update the ports/# of managed servers.
Pablo
In the response, Can we get any conflict between services if we do reconfigure to the Own managed server.?
(why i am asking this question is, at the time of configuration to single managed server, we get EPM Server Service, then some more services only. But if we do reconfigure to the Own managed server, we will get more services in Services.msc)
I didn't test this yet, just i got this doubt if we do like this what will happens. is it work or not?
Thanks for your valuable time Pablo.
Thanks,
mady

How to disable autostart (application) when managed server restart ?

Hi Ppl,
How to disable autostart (application) when managed server restart ?
I want some of the applications to remain not started. In WebSPhere, we have an option disable auto start for applications.
I don't find in weblogic.
Thanks

Hi,
I agree with Faisal. When you shutdown your WL server while the application is running, the thing is when you start your server again, it would automatically start the application with it. Now if the application was down when you shutdown the server, it _the application_ won't start with the server.
So it depends on the application last state, when you start your server.
Regards,
Mohab

Cant deploy exploded Workshop application to managed server

Hello, I tried deploying an open directory Workshop application to a managed server
and it says that I am trying to deploy a split application and that I need to
build the application and deploy as an open or packaged enterprise application.
It deploys and runs fine as it is on the admin server but not on the managed server.
I'd like to deploy it as an open directory application if possible. What am I
doing wrong?
Thanks, Jose

Hello, I tried deploying an open directory Workshop application to a managed server
and it says that I am trying to deploy a split application and that I need to
build the application and deploy as an open or packaged enterprise application.
It deploys and runs fine as it is on the admin server but not on the managed server.
I'd like to deploy it as an open directory application if possible. What am I
doing wrong?
Thanks, Jose

Getting error while deploying application in weblogic server 9.2

Im getting below error in production in weblogic 9.2 server.
####<Jan 27, 2010 8:17:02 PM AST> <Error> <Deployer> <hpw2k3los01> <LOSWebServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1264612622151> <BEA-149205> <Failed to initialize the application 'NCB_LOS' due to error weblogic.management.DeploymentException: Exception occured while downloading files.
weblogic.management.DeploymentException: Exception occured while downloading files
     at weblogic.deploy.internal.targetserver.datamanagement.AppDataUpdate.doDownload(AppDataUpdate.java:43)
     at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
     at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:98)
     at weblogic.deploy.internal.targetserver.BasicDeployment.prepareDataUpdate(BasicDeployment.java:663)
     at weblogic.deploy.internal.targetserver.BasicDeployment.stageFilesForStatic(BasicDeployment.java:706)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:100)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:38)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:177)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: '192.168.50.5', port: '80'
     at weblogic.net.http.HttpClient.openServer(HttpClient.java:320)
     at weblogic.net.http.HttpClient.openServer(HttpClient.java:375)
     at weblogic.net.http.HttpClient.<init>(HttpClient.java:149)
     at weblogic.net.http.HttpClient.New(HttpClient.java:245)
     at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:160)
     at weblogic.deploy.service.datatransferhandlers.HttpDataTransferHandler.getDataAsStream(HttpDataTransferHandler.java:75)
     at weblogic.deploy.service.datatransferhandlers.DataHandlerManager$RemoteDataTransferHandler.getDataAsStream(DataHandlerManager.java:153)
     at weblogic.deploy.internal.targetserver.datamanagement.AppDataUpdate.doDownload(AppDataUpdate.java:39)
     at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
     at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:98)
     at weblogic.deploy.internal.targetserver.BasicDeployment.prepareDataUpdate(BasicDeployment.java:663)
     at weblogic.deploy.internal.targetserver.BasicDeployment.stageFilesForStatic(BasicDeployment.java:706)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:100)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:38)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:177)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
This error is intermittent and comes during deployment.Once we get this error we have restart the server.
Can someone please tell what is the cause of this error?
we dont have any server with Ip '192.168.50.5' as mentioned in the error message.and what exactly is the server trying to download here?
Edited by: user12537931 on Jan 31, 2010 4:09 AM

Hi,
How are you trying to deploy your application on the Server...Using Admin Console...or Using any Script Like WLDeployer?
The issue seems to be related to Http protocol in port 80.
Are you sure that in your Production environment there is not firewall blocking issue...on port 80...?
Some firewall settings rejects any existing connection to be opened for a long time....If your application takes some time, then please check that the firewall doesn't disconnect the existing connection until the deployment time gets over.
<font color=red>Note: </font>Sometimes this kind of issue happens when we try to deploy our application on WebLogic Server...at that time based on the XSD informations available in our DeploymentDescriptors...the Server tries to download those DTDs from the mentioned URIs....
Example:
web.xml has some entries like:
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
In above case if the Firewall of our production environment Blocks any request to pass through Port 80 (default Http Port) then we get such exceptions.
http://middlewaremagic.com/weblogic/?p=802
Thanks
Jay SenSharma
http://middlewaremagic.com/weblogic (Middleware Magic Is Here)

Error while deploying to Production Managed Server

My setup is one Domain, one AdminServer, one Managed Server all running in Production Mode.. The AdminServer:7001 and ManagedServer:7003 are on the same box.
I can deploy my app and hit it via a web service on AdminServer:7001 but I can't hit is on the ManagedServer:7003.
What happens is I tell the ODSI Admin Console to target the application to either ManagedServer or ManagedServer and AdminServer. Doing this put's the ManagedServer into an Admin STANDBY mode, lists the following error, and remains in an UNKNOWN state. I eventually have to shut the ManagedServer down and start it again.
The server is running on the latest version of Oracle Mission Control 3.1.0 with the version of JRockit that's in there (1.6.0_11 R27.6.3).
I mean, I'd rather not run the application on the AdminServer. Does anyone have any suggestions on what to look into to try to trouble shoot this issue??
####<Sep 16, 2009 10:02:46 AM EDT> <Error> <Deployer> <computername> <XYZ_ManagedServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1253109766565> <BEA-149231> <Unable to set the activation state to true for the application 'OraclePackage2_request_handlers'.
java.lang.IllegalArgumentException: Session: null does not exist.
     at com.bea.dsp.management.persistence.primitives.ServerPersistencePrimitives.getDataspaceRoot(ServerPersistencePrimitives.java:118)
     at com.bea.dsp.management.persistence.primitives.ServerPersistencePrimitives.getDataspaceRoot(ServerPersistencePrimitives.java:73)
     at com.bea.dsp.management.activation.ActivationService.dataSpaceAlreadyExists(ActivationService.java:342)
     at com.bea.dsp.management.activation.ActivationService.setRequestHandlerClassLoader(ActivationService.java:206)
     at com.bea.ld.server.bootstrap.RequestHandlerListener.postStart(RequestHandlerListener.java:46)
     at weblogic.application.internal.flow.BaseLifecycleFlow$PostStartAction.run(BaseLifecycleFlow.java:292)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:194)
     at weblogic.application.internal.flow.BaseLifecycleFlow.postStart(BaseLifecycleFlow.java:66)
     at weblogic.application.internal.flow.TailLifecycleFlow.activate(TailLifecycleFlow.java:33)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:16)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.lang.IllegalArgumentException: Session: null does not exist.
     at com.bea.dsp.management.persistence.primitives.ServerPersistencePrimitives.getDataspaceRoot(ServerPersistencePrimitives.java:118)
     at com.bea.dsp.management.persistence.primitives.ServerPersistencePrimitives.getDataspaceRoot(ServerPersistencePrimitives.java:73)
     at com.bea.dsp.management.activation.ActivationService.dataSpaceAlreadyExists(ActivationService.java:342)
     at com.bea.dsp.management.activation.ActivationService.setRequestHandlerClassLoader(ActivationService.java:206)
     at com.bea.ld.server.bootstrap.RequestHandlerListener.postStart(RequestHandlerListener.java:46)
     at weblogic.application.internal.flow.BaseLifecycleFlow$PostStartAction.run(BaseLifecycleFlow.java:292)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:194)
     at weblogic.application.internal.flow.BaseLifecycleFlow.postStart(BaseLifecycleFlow.java:66)
     at weblogic.application.internal.flow.TailLifecycleFlow.activate(TailLifecycleFlow.java:33)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:16)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>

Hey ,Can you please help me?can you tell me how you resolved this issue.Our production is down due to
java.lang.IllegalArgumentException: Session: null does not exist.
     at com.bea.dsp.management.persistence.primitives.ServerPersistencePrimitives.getDataspaceRoot(ServerPersistencePrimitives.java:118)
     at com.bea.dsp.management.persistence.primitives.ServerPersistencePrimitives.getDataspaceRoot(ServerPersistencePrimitives.java:73)
     at com.bea.dsp.management.activation.ActivationService.dataSpaceAlreadyExists(ActivationService.java:342)
     at com.bea.dsp.management.activation.ActivationService.setRequestHandlerClassLoader(ActivationService.java:206)
     at com.bea.ld.server.bootstrap.RequestHandlerListener.postStart(RequestHandlerListener.java:46)
     Truncated. see log file for complete stacktrace.
Its urgent plz

Auto-Deployment and Restarting Managed Server

Hi,
We are using WebLogic Server 7.0 SP2 on Solaris 8. Yesterday, a developer copied
over a new WAR file into the applications directory. Then he ried to restart the
managed server. This appeared to hang, so he tried restarting the admin. server,
which also failed. Looking at the log, it looks like the admin. server is trying
to deploy apps. from the applications/backup directory.
After I removed the backup directory and edited config.xml to remove all references
to this directory, I was able to startup the Admin. server (though there were
still some errors; see later) and the managed server.
The servers are actually running in "developemnt" mode and have the Aut-Deploy
feature enabled, so my theory is that the auto-deployment was conflicting with
the managed server restart. He shouldn't have had to restart the managed server
since Auto-Deploy is enabled, right?
I'm also wondering about these errors I got when I the Admin. server finally started:
Starting WebLogic Server...
<May 4, 2004 11:41:04 AM MDT> <Notice> <Management> <140005> <Loading configuration
/wlsapp/prod/ivrprod/./config.xml>
<May 4, 2004 11:41:14 AM MDT> <Notice> <Security> <090082> <Security initializing
using realm myrealm.>
<May 4, 2004 11:41:14 AM MDT> <Notice> <WebLogicServer> <000327> <Starting WebLogic
Admin Server "admin" for domain "ivrprod">
<May 4, 2004 11:41:44 AM MDT> <Notice> <Application Poller> <149400> <Activating
application: appsdirbackup_dir>
<May 4, 2004 11:41:49 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir on admin - Running>
<May 4, 2004 11:41:51 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir on admin - Completed>
<May 4, 2004 11:41:54 AM MDT> <Notice> <Management> <141052> <Application Poller
started for development server.>
<May 4, 2004 11:41:54 AM MDT> <Notice> <Application Poller> <149400> <Activating
application: appsdirbackup_dir-0>
<May 4, 2004 11:41:57 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir-0 on admin - Running>
<May 4, 2004 11:41:59 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir-0 on admin - Running>
<May 4, 2004 11:42:02 AM MDT> <Notice> <WebLogicServer> <000365> <Server state
changed to RUNNING>
<May 4, 2004 11:42:02 AM MDT> <Notice> <WebLogicServer> <000360> <Server started
in RUNNING mode>
<May 4, 2004 11:42:13 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=2268781,name=InternetTroubleshooting,context-path=/backup/
InternetTroubleshooting)] failed to compile /dialogs/ADSLDisambig.jsp, compiler
errors:
/wlsapp/prod/ivrprod/./admin/.wlnotdelete/_appsdir_backup_dir_InternetTroubleshooting_2268781/jsp_servlet/_dialogs/__ADSLDisambig.ja
va:17: package com.nuance.ps.telus does not exist
<May 4, 2004 11:42:20 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=1642582,name=ReportAPayment,context-path=/backup/ReportAPa
yment)] translation of /dialogs/GetStatus.jsp failed: weblogic.servlet.jsp.JspException:
(line 7): class 'com.nuance.ps.telus.Shared
Storage' could not be loaded>
<May 4, 2004 11:42:20 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir-0 on admin - Running>
<May 4, 2004 11:42:22 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=3439810,name=TelusLogin,context-path=/backup/TelusLogin)]
translation of /conf/ClearOldKeys.jsp failed: weblogic.servlet.jsp.JspException:
(line 2): class 'com.nuance.ps.telus.SharedStorage'
could not be loaded>
<May 4, 2004 11:42:22 AM MDT> <Error> <Deployer> <149201> <The Slave Deployer
failed to complete the deployment task with id 16 for
the application appsdirbackup_dir.
weblogic.management.ApplicationException: Prepare failed. Task Id = 16
Thanks,
Paul

The short answer to your question is that auto-deployment and multiple
servers don't mix.
If you have a single-server domain and choose to use auto-deployment,
that'll work fine.
Once you have separate admin/managed servers, you need to use
weblogic.Deployer, the wldeploy ant task (8.1), or the console to deploy
applications.
-- Rob
Paul wrote:
Hi,
We are using WebLogic Server 7.0 SP2 on Solaris 8. Yesterday, a developer copied
over a new WAR file into the applications directory. Then he ried to restart the
managed server. This appeared to hang, so he tried restarting the admin. server,
which also failed. Looking at the log, it looks like the admin. server is trying
to deploy apps. from the applications/backup directory.
After I removed the backup directory and edited config.xml to remove all references
to this directory, I was able to startup the Admin. server (though there were
still some errors; see later) and the managed server.
The servers are actually running in "developemnt" mode and have the Aut-Deploy
feature enabled, so my theory is that the auto-deployment was conflicting with
the managed server restart. He shouldn't have had to restart the managed server
since Auto-Deploy is enabled, right?
I'm also wondering about these errors I got when I the Admin. server finally started:
Starting WebLogic Server...
<May 4, 2004 11:41:04 AM MDT> <Notice> <Management> <140005> <Loading configuration
/wlsapp/prod/ivrprod/./config.xml>
<May 4, 2004 11:41:14 AM MDT> <Notice> <Security> <090082> <Security initializing
using realm myrealm.>
<May 4, 2004 11:41:14 AM MDT> <Notice> <WebLogicServer> <000327> <Starting WebLogic
Admin Server "admin" for domain "ivrprod">
<May 4, 2004 11:41:44 AM MDT> <Notice> <Application Poller> <149400> <Activating
application: appsdirbackup_dir>
<May 4, 2004 11:41:49 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir on admin - Running>
<May 4, 2004 11:41:51 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir on admin - Completed>
<May 4, 2004 11:41:54 AM MDT> <Notice> <Management> <141052> <Application Poller
started for development server.>
<May 4, 2004 11:41:54 AM MDT> <Notice> <Application Poller> <149400> <Activating
application: appsdirbackup_dir-0>
<May 4, 2004 11:41:57 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir-0 on admin - Running>
<May 4, 2004 11:41:59 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir-0 on admin - Running>
<May 4, 2004 11:42:02 AM MDT> <Notice> <WebLogicServer> <000365> <Server state
changed to RUNNING>
<May 4, 2004 11:42:02 AM MDT> <Notice> <WebLogicServer> <000360> <Server started
in RUNNING mode>
<May 4, 2004 11:42:13 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=2268781,name=InternetTroubleshooting,context-path=/backup/
InternetTroubleshooting)] failed to compile /dialogs/ADSLDisambig.jsp, compiler
errors:
/wlsapp/prod/ivrprod/./admin/.wlnotdelete/_appsdir_backup_dir_InternetTroubleshooting_2268781/jsp_servlet/_dialogs/__ADSLDisambig.ja
va:17: package com.nuance.ps.telus does not exist
<May 4, 2004 11:42:20 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=1642582,name=ReportAPayment,context-path=/backup/ReportAPa
yment)] translation of /dialogs/GetStatus.jsp failed: weblogic.servlet.jsp.JspException:
(line 7): class 'com.nuance.ps.telus.Shared
Storage' could not be loaded>
<May 4, 2004 11:42:20 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir-0 on admin - Running>
<May 4, 2004 11:42:22 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=3439810,name=TelusLogin,context-path=/backup/TelusLogin)]
translation of /conf/ClearOldKeys.jsp failed: weblogic.servlet.jsp.JspException:
(line 2): class 'com.nuance.ps.telus.SharedStorage'
could not be loaded>
<May 4, 2004 11:42:22 AM MDT> <Error> <Deployer> <149201> <The Slave Deployer
failed to complete the deployment task with id 16 for
the application appsdirbackup_dir.
weblogic.management.ApplicationException: Prepare failed. Task Id = 16
Thanks,
Paul

Deploying applications to a server in a StandBy mode

Using WLS 8.1 SP2
Local Win 2k machine.
I have a some questions regarding re-deploying applications to a Managed Server,
in a StandBy mode, using either the Admin console or the weblogic.Deployer utility.
(I have configured the Domain Wide Admin Port and managed server starts fine in
the StandBy mode).
I noticed that I can deploy new applications using both the console and the deployer
utility. These applications get deployed after the server resumes (understandable).
However, both the deployer and the Admin console do not realize when to return
the results of the action. By this I mean, the admin console continues to spin
even after I resume the managed server
and the deployer utility never returns.
While re-deploying the same thing happens when using the Admin console, but the
deployer utility does not work. It complains that I need to deploy the application
first before I can re-deploy it, even though the application is already deployed.
Based on this, I was wondering if anyone has got this to work succesfully. If
so, can you tell what steps to follow.
Both the Admin and the managed server are on the same machine.
Thanks,
Ketan.

Check this link... It will help you
How to store image in file system, client/server architecture form 6i ?
If someone's response is helpful or correct, please mark it accordingly.

Install a web application on managed server

Hi guys,
I have 2 linux virtual machines (mach1 and mach2).
I installed weblogic with one adminserver on mach1 and one managed server on mach2.
Now I try to install apex for example on mach2. so I start weblogic on mach1, call weblogic console from mach2 BUT from here i cannot browse apex.war on mach2. It show only directories of mach1 !!! is this right ? am I missing something or all deployed applications should be installed in mach1 (where adminserver is) ?
PS: apex is an example. it can be any web application providing a war file.
thanks.

Hi,
You can deploy the application on "stage" mode, so that admin server will distribute the application to mach2.
What you have to do is keep your web application on mach1 so that it is accessible from admin console. Now deploy the application in stage mode to managed server 2 on mach2 from console. Here Weblogic will access the application from mach1 and distribute it to managed server 2 i.e on mach2.
Usualy in an ideal scenario platform design should be made to have a shared mount between machines for weblogic domain.
rank if found useful..!
Thanks,
Ranjan

Deployment Application To Weblogic Server Failed

Hello every body
I need your help in this problem please :
I'm using Oracle JDeveloper 11.1 in my local machine, I Installed Weblogic Server 10.3 on the server and it's works well, I made new JDBC connection in Weblogic Server and it's works well too.
I made new ADF Fusion web Application and I used the same connection that I used in Weblogic server and it's works well.
I made new Application Server Connection from my local machine and It's works well with my user account.
In my project I made new WAR deployment, Also I configured my Application properties to Bind Application to the Weblogic server Instance.
1-when I try to deploy my project to Weblogic server I get this error message :
Deploying Application...
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application test_webapp on AdminServer.: Failed to load webapp: 'test_webapp.war'.
weblogic.application.ModuleException: Failed to load webapp: 'test_webapp.war'
#### Deployment incomplete. #### Feb 15, 2009 12:18:01 PM
Deployment Failed
2-Another application was deployed before to Weblogic server, it seems running well, whereas Weblogic Server marks my deployment health as OK, but when I try to run it for test using this URL : http://serverIP:Port/Deployment Name, I get this Error : Error 403--Forbidden
What Should I do for both cases ?
Thanks a lot ...

Thanks Timo
But first I don't use any library at my project , this is last log in Weblogic Server logfile :
####<Feb 16, 2009 1:56:58 PM EET> <Warning> <DeploymentService> <D2KR2> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <Osama> <> <> <1234785418343> <BEA-290008> <Deployment service servlet encountered while extracting uploaded file to directory ".\servers\AdminServer\upload\test_webapp". Exception is: "invalid distance code".>
Where D2KR2 is my Server Name
Osama is my user in Weblogic Server
test_webapp is the Application name
My problem didn't solved yet, and I'm new at JDeveloper ADF.
Where I can find clear information about deploying projects to Weblogic server.
Thank's Agin ...
Edited by: user8330337 on 15/02/2009 04:09 ص

How to use jspx deployed in different managed server from bpm work space

Hi,
I have created and deployed my view project having all the jspx files and managed beans into a different managed server(created a new server,not into the soa server).
I have created a bpm process and now I want to use the jspx page(deployed into the new managed server) in my bpm wrokspace.
Can anyone help me how I can do it.
thanks in advance.
Regards,
Tukuna

Hi ,
I tried with the below url and still i am not able to open the jspx page deployed into the admin server.
http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/bp_designtf.htm#BDCFBJIE
28.8.4 How To Deploy a Task Form to a non-SOA Oracle WebLogic Server
Any help on this is appreciatable.
Many thanks
Tuku

Deploying applications to Terminal Server.

Hi,
Brief question, when deploying applications to a terminal server, setting the deployment to 'no user logged on' is fine but do you need to script putting the server in install mode and then execution mode either side of the deployment, i.e make the script
a dependencie?.
Thanks

#1: you can use a script that changes the install mode, installs the application and changes to install mode again
#2: not needed
Torsten Meringer | http://www.mssccmfaq.de

Deploying application on managed server

Similar Messages

Maybe you are looking for