Deploying Crystal Report 11.5 without using .msm or .msi

Post Author: kquach
CA Forum: Deployment
Hi,
I am trying to deploy the Crystal 11.5 runtimes .dlls for my project.  I want to deploy the assemblies without using the merge modules or running the .msi project (the .msi and .msm files contains a lot of assemblies that my project does not require).  However, when I try to install only the .dlls that my project references, I get the following in my project when loading a report:
An error has occurred while attempting to load the Crystal Reports runtime.  Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly.  
If someone knows how to deploy the Crystal Reports assemblies with using the merge modules or .msi,  please let me know.
Thanks,
Kiet Quach

Post Author: jehanzeb
CA Forum: Deployment
Morning Keit,
I have deployed an application about 2mins ago and I had the same problem before I added the merge files. I have found an article [http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=3129696&SiteID=1&mode=1] in a thread here. This link shows how to install the Runtime CR2008 on client machine to make things work.
I personaly thinks deploying applications using not only CR but other products as well is a nightmare, myself I prefer using web based applications as they do not need much requirements on client pc (that is if everything is pushed from the server).
The way I deployed my application is getting the appropriate dll files and added them into the application setup and also added a prerequiste of CR 2008 with Data access components 2008 (you can find this when you right click on the application setup --->properties -
>prerequsite button.
Once I clicked CR2008 pre, it added a Runtime file into my application setup folder, I ran the application at client pcs and it is working fine.
Regards
Jehanzeb

Similar Messages

  • Deploying Crystal Reports 2008 runtimes without using MSI/MSM

    Post Author: windentdev
    CA Forum: Deployment
    We are having multiple issues with using the MSI or the Merge module to deploy the 2008 runtimes.
    Specifically, one of the issues is that PrintControll.dll will not register and causes the runtime package to fail.
    How can we deploy these run times w/o using the MSI or merge module??
    We just upgraded from Crystal Reports 11.5 and this is becoming a burden to our project.  Are there any whitepapers on what is needed or any other instruction that may assist us in a sucessful deployment of these runtimes?

    Post Author: Justin Azevedo
    CA Forum: Deployment
    I eventually found the problem. I used depends to trace the printcontrol.dll and found that it requires msvcr71.dll to be installed in the system folder. This is a Visual C++ 7.1 (.net 2003) library. It looks like Business Objects forgot to put this into their runtime installer. That is why it works on some computers and not others. Some computers have this dll file installed as part of other software (including other crystal reports versions). I created a patch installer that basically drops this dll file into the system folder. Once that is done, then the runtime installs correctly.
    If you would like to recreate this problem, try installing the CR2008 runtime (MM, EXE, or compact) on a FRESH copy of Windows. It will error out everytime.
    If anyone reading this would like my patch, please send me an email.

  • Deploy Crystal Report via ClickOnce without .msi

    Hi,
    I would like to know whether it's possible to deploy Crystal Report without requiring admin rights from the installer.
    My program uses many 3rd party components. Most of them very heavyweight with licensing, COM objects etc but Crystal Report is the only one that needs a .msi install. Is it possible to include Crystal Report's dll with the application? I tried it but Crystal Report failed to load at the form saying there's something wrong with the installation (I didn't "install").

    Only way to distribute the CR runtime is via the MSM or MSI files. For links to the msm and msi files see [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki.
    Ludek

  • Deploying Crystal Reports runtime using merge module failed

    Hi,
    I am having a problem when deploying Crystal Reports using merge module runtime, included into MS Visual Studio web setup project, when installing my *.msi with CR runtime on a completely clean PC (with only MS Windows installed). Error: Failed to register one of the Crystal Reportsu2019 *.dll because it could not find Microsoft visual C++ runtime (msvcr71.dll was not in Windows\System32 folder)
    I am using Crystal Reports runtime merge modules, which I downloaded from here: https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
    I tried both cr120_mm.zip (Crystal Reports 2008) and cr121_mm.zip (Crystal Reports 2008 SP1)
    cr120 could not find msvcr71.dll, cr121 could not find msvcp80.dll.
    Steps to reproduce:
    -          In MS Visual Studio 2008 create a new empty Web Setup Project.
    -          Add Crystal Reports merge module CRRuntime_12_0.msm or CRRuntime_12_1.msm
    -          Build *.msi
    -          Try to install this *.msi on a completely clean PC. I tried it on Windows Server 2003 R2 SP3, which did not have msvcr71.dll or msvcp80.dll files in C:\Windows\System32 or in any other PATH folders.
    -          During installation there is an error u2013 failed to register one of the Crystal Reportsu2019 *.dll
    I am looking forward to hear from you.
    Thank you.

    I believe these threads have the answer for you:
    https://forums.sdn.sap.com/click.jspa?searchID=19475295&messageID=6558989
    https://forums.sdn.sap.com/click.jspa?searchID=19475295&messageID=6559113
    Ludek

  • Pre-Purchase Question - Deploying Crystal Report to SSRS Report Server

    Our company has recently installed a SQL 2005 server for our accounting system.  I had intended going down the path of using SQL Reporting Services as our reporting tool and deploying them to the builtin Report Server.  However, I've been using Crystal Reports for years and find it much more user friendly for a non-programmer to use.  I can actually write a report in Crystal, SSRS took me 3 days to achieve very little, I believe it requires too much SQL reporting knowledge for a beginner.
    After spending many hours trawling the net looking for a solution to this problem, I found that Crystal comes as part of Visual Studio.  However, I also believe the version of Visual Studio that comes with SQL2005 is the basic version, and I'd need the Pro version to get the Crystal add on. 
    To this end, I've downloaded the trial version of Crystal 2008 and installed it.  I find I can write a report in Crystal, and then I can manually add that report to a SSRS project. When I open the Crystal Report within Visual Studio I can see all the correct Crystal toolbars and menus etc, so it would appear that the installation of Crystal for Visual Studio has integrated properly.  I can then deploy that report to the Report server and see the report on the web page.  However clicking to open the report then opens the full Crystal Reports application, instead of just displaying the report in the web page.
    I've been unsuccessful in finding a solution to the above deployment problem.  I'm seeking a solution so that my users can just see the report without Crystal itself opening up.  I've been advised that there is a Crystal Report Server that I can purchase, but I don't wish to go to that expense when we already have this functionality built into our SSRS server.
    Can you please advise if it's possible to deploy the Crystal report to the SSRS Report Server and then open the report within the web page without opening the full Crystal app, and if so what steps I would need to take to implement this. 
    If this issue can be resolved, I'll be more than happy to purchase the full Crystal 2008 package and forget SSRS as a bad idea.
    Sorry to be so long winded, I wanted to be clear what the issue is.  Any information /advice would be very much appreciated.

    Hello Diane,
    I would not know if Crystal Report can be used with SSRS but I know for sure that you can use the embedded Crystal Reports Version with comes with VS 2005 or VS 2008 to create reports and to display them in web and windows application.
    We have lots of samples how to do this in our [dev community|https://boc.sdn.sap.com/].
    Also, you can use [Crystal Reports 2008|https://boc.sdn.sap.com/developer/library/CR2008SDK] with MS SQL 2005.
    Other products like Crystal Reports server can also use MS SQL 2005.
    Please see our [supported platforms for CR 2008|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000712280&_OBJECT=011000358700000675322008E] on windows.
    Hope this helps
    Falk

  • Error deploying Crystal Report XI R2 to Enterprise - Failed to read paramet

    Error deploying Crystal Report XI R2 to Enterprise - Failed to read parameter object.
    I know this issue has been addressed several times and the solution recommended was to install Service Pack 2. I have done that. It started working for me too; however recently I got some error saying some UDF***.DLL is missing. I re-installed Crystal Reports XI R2 and Service Pack 2. Unfortunately though, this error is back. I have restarted the machine n number of times but keep on getting this error.
    My report file has dynamic parameters defined through command object (SQL Query). My understanding is that once I publish the report to BoE Enterprise, BO will create LOVs and BV's in the repository. Now that is not happening.
    has any one else had this issue before and resolved it?
    Thanks

    Hi,
    do you export your CR report in your BOBJ repository using an account with administrator rights?
    Regards,
    Stratos

  • How to Deploy crystal reports in BOE

    Hi,
        I have two questions.
        1.How to deploy crystal reports in BOE server.
        2.How many ways is there to deploy crystal reports in BOE server and name of the method is needed.
       Anyone knows about these details could you please reply me
    Regards
    Babu N

    I am not sure what you are asking.
    Are you trying to publish reports into Enterprise so they can be run from say infoview, scheduled etc?  If so you can either use the publishing wizard or do a save as from the Crystal Reports designer and save them to Enterprise directly.

  • Deploying crystal reports basic for visual studio 2008 for VB6

    My application has a module in .net and other in vb6.
    I have a problem on deploying crystal reports in client machines, for module in vb6.
    The vb6 application uses crystal viewer control obtained from crystal reports basic for visual studio 2008.
    What type of deployment should I use?
    Currently, I have a setup with prerequisite "crystal reports basic for visual studio 2008".
    But I think it misses the dlls crviewer.dll and craxddrt.dll, so I put them in setup and with the register COM options, and it works, but it's not working very well.
    When I open a form that uses crystal viewer, the setup (I have created) is lunched and says that have to restart machine. Then it opens the report, but the next time I use the application it does the same thing.

    Ok, thank's for the posts, they help so much.
    So I'm going to discard vb6 and move to .NET, but... there is a problem:
    Many reports have parameters that are asked before showing the report.
    The Crystal Viewer that is used in VB6 version isn't the same used in .NET.
    The viewer of VB6 asks the parameters in the way we want, however the .NET crystal viewer ask's the parameters in way that we don't like, because we have to do next -> next -> next...
    The links above show the diferences:
    VB6 ->  http://picasaweb.google.com.br/paulo.gonc/CrystalReports#5249249283702618322
    .NET -> http://picasaweb.google.com.br/paulo.gonc/CrystalReports#5249246459437178242
    There is a way to configure Crystal Viewer, so that parameters asking form will work like the vb6 away?

  • Crystal Reports with BEx Query using Custom Exit Variable

    Hi,
    We have BW BEx Query using Customer User Exit variable to derive  the Fiscal Week for Last Year (called it VAR2) based on another user input variable Current Fiscal Week (called it VAR1).
    VAR2 is derived from VAR1 in CMOD via some codings and thus it DOES NOT have the "Variable is Ready for Input" flag ticked in the BEx. VAR1 is user input variable, so it has "Variable is Ready for Input" flag ticked in the BEx.
    When we create a Crystal Reports with the BEx Query using variable VAR2, and when we run it we got an error message saying "Failed to execute query; '[]<java.lang.UnsupportedOperationException: No Selection State Support!ZP_MI_LYPUBWEEK>'. Redesign your query or contact the data source maintainer to solve the problem".  (note: ZP_MI_LYPUBWEEK is VAR2 in this case).
    Could anyone please assist? Surely, CR supports BEx customer user exit variables like the above, right?. I also refer to the forum below as it seems to have a similar issue (except mine with an error message), but it does not provide a solution in it.
    Crystal Reports with BEx Query using Custom Exit Variable
    Thanks,
    Andy

    Hi Vibhav,
    We have the SAP Crystal Reports for Enterprise XI4.0 Version 14.0.0. Not sure if SP0 or other SP, got to check with Basis Team later.
    We tried that "mandatory" option and did not work either.
    Anyway, SAP has now come back again saying it is something they will fix it in next release/version. We got a phone call from them and a reply below to our OSS.
    23.08.2011 - 08:20:49 CET - Info for Customer by SAP  
    I have raised this issue on the Idea#s Place as an enhancement request
    on the below link:
    https://cw.sdn.sap.com/cw/ideas/5586
    This ER contains the information of including the customer exit
    variables in the report without checking the #input for ready# option.
    This ER can be considered for being implemented in the future
    versions. You can refer to SAP Note: 1515837 - How To: Enhancement
    Request Process - "Idea Place" for more information regarding the Idea
    Place.
    Cheers,
    Andy

  • Deploying crystal reports 8.5 - error in exporting to RTF & PDF

    Hi guys. I'm at my wits end, trying to get a valid build of a legacy app running reports under Crystal 8.5 going.
    I've scoured google for days, and I've tried almost everything people have suggested. At the moment I've got the installer working, it installs and registers all the crystal dll's that everyone says are needed. However, when I try and and export a report to RTF or PDF (other options like excel work fine), it simply dies, doing basically nothing. The save to disk dialog just closes and nothing happens. If I rename or delete crxf_rtf.dll, the program will crash or hang, indicating that this is the file responsible for exporting to rtf.
    However, the only machine in our office that this will work on is one with a C:\Program Files\Seagate Software\crtslv.dll file.. Same kind of test indicates that on this machine, the above file is being used for exporting. So, where am I going wrong? It seems ludicrously difficult to find a straight, no-nonsense guide on how to deploy crystal reports 8.5; the official documentation doesn't even mention it! What is the easiest way to do this?
    I have tried several third-party options ( http://www.fryan0911.com/2008/09/crystal-report-85-runtime-files.html ) like these..
    Any ideas?
    Ok so here's a further breakdown with some more information; hoping it might help someone to come up with an answer...
    If I install a crystal "distributable", like the one linked above, and then install my project (with all crystal stuff turned off in the installer), everything works perfectly apart from exporting reports to rtf.
    If I make my own installer, following the Runtime.hlp and the crpe32.dep, and put all dll's in the windows/system32 folder (apart from two, can't remember their names), I get two different errors, depending on the version of crpe32.dll I use.
    One gives me "Error 20599: Cannot connect to SQL Server", whenever I try and run a report.
    The other gives me "Error 20000: N", whenever I try and run a report.
    Anything sound familiar here guys? I have dll dependency headache.
    Again, more info - I just checked out the PC's already in deployment (we had to re-do in the installer for some changes, the guys who did it originally aren't around anymore), and here is a list of the dll's installed on the machine.. what deployment method would this point to?  And how can I replicate it?  I'm not sure if I grabbed all the required DLL's from the client machine, as it didn't seem to follow the Crystal 8.5 deployment instructions, I could have easily have missed some? So I can't just use what I've got to create an installer and hope that it works...
    "C:\Windows\Crystal\P2LIFMX.dll"
    "C:\Windows\Crystal\p2lora7.dll"
    "C:\Windows\Crystal\P2lsql.dll"
    "C:\Windows\Crystal\P2lsyb10.dll"
    "C:\Windows\Crystal\p2sacl.dll"
    "C:\Windows\Crystal\p2sexsr.dll"
    "C:\Windows\Crystal\p2sfs.dll"
    "C:\Windows\Crystal\p2sifmx.dll"
    "C:\Windows\Crystal\p2smapi.dll"
    "C:\Windows\Crystal\p2sNote.dll"
    "C:\Windows\Crystal\p2sora7.dll"
    "C:\Windows\Crystal\p2soutlk.dll"
    "C:\Windows\Crystal\p2srepl.dll"
    "C:\Windows\Crystal\p2ssql.dll"
    "C:\Windows\Crystal\p2ssyb10.dll"
    "C:\Windows\Crystal\p2strack.dll"
    "C:\Windows\Crystal\p2bbde.dll"
    "C:\Windows\Crystal\p2bxbse.dll"
    "C:\Windows\Crystal\P2ldb2.dll"
    "C:\Windows\System32\crviewer.dll"
    "C:\Windows\System32\crxlat32.dll"
    "C:\Windows\System32\CRXML15.DLL"
    "C:\Windows\System32\CRXML15R.DLL"
    "C:\Windows\System32\CRXML15S.DLL"
    "C:\Windows\System32\CRxmlx07.dll"
    "C:\Windows\System32\CRxmlx07r.dll"
    "C:\Windows\System32\crypt32.dll"
    "C:\Windows\System32\cryptdlg.dll"
    "C:\Windows\System32\cryptdll.dll"
    "C:\Windows\System32\cryptext.dll"
    "C:\Windows\System32\cryptnet.dll"
    "C:\Windows\System32\cryptsvc.dll"
    "C:\Windows\System32\cryptui.dll"
    "C:\Windows\System32\Crystl32.OCX"
    "C:\Windows\System32\cscdll.dll"
    "C:\Windows\System32\cpeaut32.dll"
    "C:\Windows\System32\craxdrt.dll"
    "C:\Windows\System32\Crbas14.dll"
    "C:\Windows\System32\CRBAS15.DLL"
    "C:\Windows\System32\CRBAS15R.DLL"
    "C:\Windows\System32\Crdb214.dll"
    "C:\Windows\System32\credssp.dll"
    "C:\Windows\System32\credui.dll"
    "C:\Windows\System32\Crgup14.dll"
    "C:\Windows\System32\CRiadx07.dll"
    "C:\Windows\System32\CRiadx07r.dll"
    "C:\Windows\System32\Crinf14.dll"
    "C:\Windows\System32\Crinf914.dll"
    "C:\Windows\System32\Cror714.dll"
    "C:\Windows\System32\Cror814.dll"
    "C:\Windows\System32\crpaig32.dll"
    "C:\Windows\System32\Crpaig80.dll"
    "C:\Windows\System32\crpe32.dll"
    "C:\Windows\System32\Crsyb14.dll"
    "C:\Windows\System32\crtdll.dll"
    "C:\Windows\System32\Crutl14.dll"
    "C:\Windows\System32\CRUTL15.DLL"
    "C:\Windows\System32\CRUTL15R.DLL"

    Wow. I've never seen an app load all 3 SDKs in one go. the RDC, Automation Server, OCS and print engine APIs all in one (?!)Who wrote this app?
    Don't know - the app was written years ago.. It's all a bit messed up, i'm just the cleaner :S
    Once again, I have not a clue as to what SDK you are using.
    What Sp1, SP2, SP3? Do you have links to these?
    By SP3, I meant Windows XP Service Pack  3, 2, 1 - I've read around the net that Crystal 8.5 exporting breaks when you install sp3, and I thought that perhaps my deployments were failing because they were compiled on a sp3 box?
    There is also CR 8.5 Service Pack 3 - apparently it can make CR work on Vista/Win7?
    http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp
    I have tried installing on dev machine, recompiling installer and running on test box - doesn't seem to help..
    Do you have any machine where this actually works?
    Yep, it's working on the clients machine - that is the one suffixed as "AA" in the linked difference file above
    1st place to start is with a working app - is there such a thing? ^^
    Next you want to know what SDK you are using.
    Ok, so the VB6 app, under Project > References, lists : cpeaut32.dll
    under Project > Components, lists: Crystl32.ocx
    Is that any help?
    Then you want to know what dlls to deploy.
    Knowing the database connection type is good.  - ODBC
    Knowing the version of the db client that works is good. But that depends on having an actual working app.
    Do you have CR 8.5 designer and are you able to run and refresh the report there? 
    Yep, I have 8.5 designer, and I can run and export the report fine.. But when I run MODULES on it, it's referencing C:\Program Files\Seagate Software\Shared\ExportModeller.dll & crtslv.dll..  Which don't exist on the client machine at this point in time..
    I'd recommend you stop doing what ever you are doing, answer the questions and wait until I get back. As it is, you're all over the place and by the time I have a chance to reply, you're 1000 miles out in the bushes on your own. So, please answer the questions above and wait...

  • Deploy Crystal Reports XI Release 2 without setup project

    We are upgrading our development environment to Crystal Reports XI Release 2. Once we have done this we'll need to upgrade our production web server for Release 2. We can't create a setup project for the application, long story but we have an automated job that does our release to production on a file by file basis. So what files do I need to copy/install on the production server to upgrade it to Release 2?

    Don \ Jason,
    We are currently running Crystal Reports .Net Server R1 On our internal web servers. I am in the process of getting R2 installed on our food chain. Due to some configuration limitations, our standards are to have non OS applications installed on a different partition. I have been looking for some option strings to pass into the MSI to override the install location.I have not been able to find anything.
    Is this possible to do? I noticed even when you simply run the MSI it never asks to confirm an install location.
    I am running this MSI : CrystalReports11_5_NET.msi
    Thanks,
    Mike

  • Deploying Crystal Reports 2008

    Hi,
    I have both Visual Studio 2008 and Crystal Reports 2008 installed on my development PC.   I'm having issues deploying my applications since I installed Crystal Reports 2008. 
    Installing on x86 PCs, customers are having to install both:
        CRRedist2008_x86.msi
        CRRuntime_12_0_mlb.msi
    on 64-bit PCs, no matter what I try I can not get the reports to generate without an error of missing files or incorrect versions.
    I've tried CRRedist2008_x64.msi, (and practically every other possible download of service packs, install MSI files, etc, etc.)
    I also can't seem to get any version of merge modules working.  I get all kinds of errors like:
    "...Error merging 'CRRuntime_12_2.msm': Unable to merge data from the merge module because it conflicts with existing data in the package.  MergeModule: table='Directory' row='DesktopFolder' Database: table='Directory' row='DesktopFolder'     C:\Projects\iEnergy\Setup\Setup.vdproj     Setup ..."
    It seems having both Crystal Reports 2008 (version 12.x), and Visual Studio 2008 (version 10.x) has really messed things up.  There must be a simple way to deploy this on x86 and 64-bit PCs.  
    Telling customers to install multiple exe/msi files doesn't fly either.
    If someone could help clear all this up, I would be really grateful.
    Thanks,
    Glen.

    Hi Glen,
    Use the same Patch version of the redist packages as what you have installed on your DEV PC.
    You should search here first also, lots of help on distributing which should answer all of your questions also.
    First - CRRedist2008_x86.msi is for CR Basic for VS 2008. Not required.
    Second - CRRuntime_12_0_mlb.msi is the original release of CR 2008 runtime.
    Then your error indicates you are trying to install Service Pack 2.
    Check your project, all of the References should be Version 12.x.x.x. The second x indicates the service pack level so this must match with your DEV PC is also using.
    Second major change is in your Projects Properties change the CPU to x86 Only. CR 2008 does not have any 64 bit runtime, only 10.2 and 10.5 for VS but it's limited in what it can do in it's API list.
    Again search for 64 bit in this forum and you'll find lots of links on how to....
    Do not use the MSM's, if you do you also must also include the Windows C++ distribution packages.
    Bottom line is search here and you'll find all of your answers.
    Thank you
    Don

  • Deploying 'Crystal Reports' on a 64 bit machine

    Hi,
    I am trying to deploy my application on a 64 bit machine.
    I am using Crystal Reports XI release 2.
    When I tried to deploy it ona 32 bit machine i simply added the
    CrystalReports11_5_NET_2005.msm file to my detup project and it worked.
    However, when I tried to do the same thing on the 64 bit (with a 64 bit setup project)
    I recieved a runtime error message:
    "An error has occurred while attempting to load the Crystal Reports runtime.
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime
    is not installed correctly."
    after that it was said:
    "Please install the appropriate Crystal Reports redistributable (CRRedist*.msi)
    containing the correct version of the Crystal Reports runtime (x86, x64 or Itanium) required..."
    I installed 'CRRedist2005_X64.msi' on the 64 bit machine and tried to run my setup with and without
    the CrystalReports11_5_NET_2005.msm file, and it didn't work.
    What should I do next?
    Thanks,
    Arik

    Hi Arik,
    You need to use the CrystalReports11_5_NET_2005.msm file for the application deployment.The 'CRRedist2005_X64.msi' is meant for the bundled version of Crystal for Visual Studio 2005.
    You could refer to this [Business Objects Note.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
    In addition, you would need to enable the 32 bit mode of the ASP.NET 2.0 on the deployment server. This is because it is necessary to run the application under 32 bit mode. Please refer this MS Kbase article for more info - http://support.microsoft.com/kb/894435
    Regards,
    Ranjeet.

  • Issue with New Release Deploying Crystal Reports for Visual Studio 2010

    Previously I created a deployment project with Visual Studio 2010 using the Beta 2 release of the distributable. This worked fine and installed on a 32-bit XP machine.
    I've since updated the project to use the new Release version of the distributable CRRuntime_32bit_13_0.msi. Now when I run the installed program it gives me the following message -
    "An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information."
    I've had a look at verious posts and added code to the app.config file so it looks like -
    <startup useLegacyV2RuntimeActivationPolicy="true">
    <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
    </startup>
    and also tried targetting various .NET frameworks, but without success.
      Am I missing something?

    Hello,
    More info, are you installing on the same PC as the Beta was installed on or a clean PC?
    Your app must be set to the full framework, not the client version.
    Are you installing by right clicking on your setup.exe and selecting run as administrator?
    Setting that option in the app.config is only required if you are using that driver you found the info on.
    Run ProcessMonitor and set it to filter your installer and see what it reports.
    Thank you
    Don

  • Crystal report print directly without crystal viewer

    HI !
    In my addon i use Crystal Report. What would be the code i need to add if i want to print directly instead of having to go thru the crystal viewer.
    The crystal viewer gives me lots of problems with painting the screen when i move the form and it allways opens in the task bar. I cant seem to control the window sizes of the viewer either so unless it's easyer to fix those problem i need help to go and print direct without the viewer....
    Thanks for your time

    Hi John !
    I finnaly made it work... 
    here's what i used
    Dim objAppl As New CRAXDRT.Application
                Dim objReport As CRAXDRT.Report
                objReport = objAppl.OpenReport("C:Program FilesSAPSAP Business OneAddOnsDutiesresultat.rpt")
                objReport.PrintOut(True, 1)
    Thanks alot for your time.
    p.s.: I can i get the print window open on the screen instead of the task bar ??? it did that with the viewer too...
    Thanks again

Maybe you are looking for