Deploying Flash Player 11.5.502.149 errors ...

Hello everyone. We are trying to deploy Flash Player 11.5.502.149 and are receiving 2 error messages and are not able to figure out why this is happening. Any assistance would be greatly appreciated:
Error 2753.The File 'InstallAX.exe' is not marked for installation.
Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Windows\TEMP\InstallAX_11_5_502_149.exe, command: -install -msi
Thank you in advance!
Mike

Anybody? Bueller? Help!

Similar Messages

Downloading timeout when installing flash player 11.5.502.149 on mac osx ?

Downloading timeout when installing flash player 11? I have a new MacBook Pro. I have OS 10.8.2. I cannot get FlashPlayer to download. I have tried uninstalling and reinstalling Adobe Flash Player 11 from the Adobe website. Doesn't work. Every time I try to download, I get an error message that says "downloading timeout at 47%" Can someone PLEASE help? I've spent hours with this and am very frustrated.Check if Flash Player is installed on your computer on adobe website: blocked plug-in

http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg

Flash player 11.5.502.149 will not install, states that the version of flash is not the most current

I'm using the runtime (install_flash_player_11_active_x.exe) install for Flash 11.5.502.149 which I just downloaded. I'm trying to install it on a Windows 7 64bit system. When I try to run it the install tells me that the version of flash is not the most current and I should download the most recent version. Accorsing to the site, this is the most recent version. Any thoughts?
Thaks,
Keith

By the time I saw this, the OS was corrupt. This isn't going to help me right npw. One very important item, though, for those of us who use the runtime to install, it needs to be modified so that it doesn't look for a newer version of the install before it actually installs. We use Altiris to push this out to our folks and that check causes the installation process to stop. My guess is that it is waiting for a response which will never occur since it is running in a hidden window. I agree that it needs to be updated, but this method is causing significant issues. This was the same problem I found when trying to install an older version of Flash that didn't have the issues with Sysprep that later ones did.
That said, is there a switch for the install_flash_player_11_active_x.exe that will force it to run without checking first? The -install doesn't stop the checking.
Thanks,
Keith

Flash Player 11 ActiveX install fails -- Error 1722

Hi,
I am unable to install Flash Player 11.5.502.149 on Windows 8. The error reported is:
Adobe Flash Player 11 ActiveX -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Nick\AppData\Local\Temp\InstallAX_11_5_502_146.exe, command: -install -msi
We have tried running uninstall_flash_player.exe to try and clean things up but this still fails. Is there a known problem with installing Flash player ActiveX on Windows 8? Flash player Plugin works fine just the ActiveX version which does not.
Thanks,
Nick

Adobe http://www.adobe.com/support/flashplayer/downloads.html states
“Note: Release builds of Flash Player for Windows 8 are a part of the Windows 8 update”
So we cannot push flash directly, rather it is included in WSUS.
This is nice, but we have an application that crashes in IE 11 unless we use the Flash install from the Adobe site.
We have contacted the application vendor, but systems are down now.

I receive the message "Error: Failed to register" when installing Adobe Flash Player 11.5.502.135 o

I receive the message "Error: Failed to register" at the end of attempting to reinstall Adobe Flash Player 11.5.502.135 (after a complete uninstall of all Adobe programs) on my older machine running Windows XP and the older browser IE 7. I have tried the offline download installer and my Google Chrome browser setting is "allow all sites to run Java". I allowed the program to run from my AVG firewall dialog box. Windows firewall did not ask. I am logged in as administrator. What should I do because some programs prompt me for this install in order for some functions to work correctly.

See if this topic contains a solution for your problem: How do I fix Windows permission problems with Flash Player?

Error #3343 Unknown error playing video Flash Player 11.5.502.146 + Citrix

Hi I'm getting an Error #3343 Unknown error playing protected content videos from Vocam.
I have Windows 2003 R2 Enterprise Terminal Servers Citrix Xenapp 5, Flash Player 11.5.502.146, IE 8.    This works fine on Windows XP / 7   and IE 8 / 9 but just not on Citrix servers.
I've used Process Monitor and found no erorrs found only
          RegOpenKey         HKCU\Software\Classes\MIME\Database\Content Type\video/x-flv                NAME NOT FOUND
          RegOpenKey         HKCR\MIME\Database\Content Type\video/x-flv               NAME NOT FOUND
I'm told I need to allow the Adobe Access Module update ??     Also tried installing Adobe Air.
http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118666ade46-7ce3.html says Flash Player 11.5 and above integrates the Adobe Access module, so the update step (calling SystemUpdater.update(SystemUpdaterType.DRM)) is unnecessary
http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118676a5be7-8000.html - When a user tries to play protected content in Flash Player or Adobe AIR, your application must call the DRM APIs. The DRM APIs initiate the workflow for playback of protected content. The runtime, through the Adobe Access module, contacts the license server. The license server authenticates the user, if necessary, and issues a license to allow playback of protected content.
Are there any Registry keys/ Permissions / C:\Documents & Settings / Security / Applications that require All Users - Full control
any suggestions - thanks.

I'm not sure what's going on here so I've forwarded this along to our DRM team. Please be aware thought that Citrix is an unsupported platform.
I'll let you know what I hear back.
Thanks,
Chris

Adobe Flash Player 11.5.502.135 Active X failing

Adobe Flash Player 11.5.502.135 Active X failing through SCCM 2007. Tried to use uninstaller but that too is failing... i am trying to push this to 3500 machine but on 1700 machine Adobe flash player is not getting installed and the error message which we are getting is stated below, please suggest:
Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\WINDOWS\TEMP\InstallAX_11_5_502_135.exe
Error 2753.The File 'InstallAX.exe' is not marked for installation.

The two links (which I have asked the moderators to remove) do not actually go to image files, as they would appear to, but instead point to files that are identified by at least a few anti-virus engines as Windows malware. This is not a legitimate message.
Can you clarify where you are seeing this message? You say it appears every time you open a website... do you mean that it appears any time you open Safari, or every time you load a new page on any site you get a popup with that message, or what? If you could provide a screenshot of the message that would be exceptionally helpful.
Make a screenshot by pressing command-shift-3 to capture the entire screen, or pressing command-shift-4 and then selecting a region on the screen to capture. Be sure no sensitive personal information is displayed. To add that image to a post here, click the camera icon in the post editor toolbar.

Adobe Flash Player 11.5.502.110 SCCM exit code 1003

I'm currently trying to rollout Adobe Flash Player 11.5.502.110 using Microsoft SCCM to our corporate machines (600 machines). I am using the command line "install_flash_player_11_active_x.exe - install" in the SCCM package.
However, when running this through SCCM it just fails with an exit code of 1003 and states "retrying". This is the same on all 3 test machines that I have tried so far.
When running the same command through a command line, it does install the software.
The machines are all running Microsoft Windows XP SP3.
Has anybody been able to successfully deploy this software to multiple machines using Microsoft SCCM?
Thanks in anticiptation.

Flash Player Help | Installation problems | Windows
Flash Player Help | Installation problems | Mac OS
Mylenium

How to solve inability to install Adobe Flash Player 11.5.502.146 for MSIE9

Update - 1/24/13: After spending hours trying all of the suggestions on the web for Flash installation solutions, without any success, I installed IE10 (replacing IE9) and afterwards Flash Player installed successfully.
I am unable to install on Windows 7, the current downloaded standalone installer for Adobe Flash Player 11.5.502.146. I uninstalled the old Flash Player using the adobe uninstaller. Nothing happens after I double click the latest installer file named install_flashplayer11x32ax_gtba_chra_dy_aih.exe. There are no error messages, all that happens is the installer file deletes itself. I have checked in the Windows Task Manager for any active Flash Player processes and are there are none. The online installer for Firefox worked fine and installed the Flash Player without problems. I am unable to find any solutions on the adobe webpage "Flash Player Help - Installation problems | Flash Player | Windows" (linked to the download page). I am up against a brick wall, and your assistance will be greatly appreciated. Thanks!

I'm glad you were able to work around this. I hope IE10 works well for you (I've been using it on Win8 but haven't tried the preview for Win 7 yet.) In the future, you can also try to use the stand alone installers located here:
Installation Problems - Flash Player - Windows

When are Adobe going to make it easier to deploy flash player to the enterprise????

I've been deploying flash player for well over 5 years now and in that time the deployment has only got very marginally better.
Why do they continue to allow installs just to fail when the control is in use??? I've written vbscripts to kill the handle to the ocx activex file, rename the ocx to .old which allows the installax.exe install utility to complete without errors. When Internet explorer next relaunches it uses the new control and the old one can be deleted. Why can't they incorporate this kind of logic into their installs?
Why do Adobe insist on using rubbish exe routines inside msi's that are perfectly capable of installing applications and don't just bomb out at the first sign of a difficulty? Using custom installer routines inside msi's makes it very difficult for people who have more than adequate repackaging and software deployment experience to be able to customise and get around the difficulties that Adobe forces upon us.
When are Adobe going to realise that the way they are releasing updates for flash player is costing companies a lot of money in company's helpdesk and systems team's time spent supporting and troubleshooting their buggy installs? At best I've only experienced a 95% success rate with flash player deployments. Some people might say "what am I complaining about?" and "that's to be expected". This has only been the case with weeks of work to fix the flaws in the flash player install routines. However 5% failure on 4000 machines is 200 possible help desk calls and 200 people not able to use various applications, view web content etc. Before we invested the time in scripting to get around the installer flaws the success rate was closer to 75%, that's 1000 out of 4000 that were failing. Does anyone think that's acceptable considering how widely it's used?
What has Adobe got planned for enabling large businesses to manage the deployment of flash player better? They've done it with other products why can't they do it with flash player?
For software deployment teams this is a constant and ever present headache.
Any Adobe representative want to comment???

It's ridiculous cause most website use Flash Player and none of them work on my LG 650v Smart TV.
Are discussions being held between Adobe and LG? If yes, are they close to a solution? If no, what seems to be the issue?

Flash player plugin _12_0_0_77.exe - application error in win 7

How to solve flash player plugin _12_0_0_77.exe - application error in win 7?

You get this when doing what? Is there any additional information in the message?

The new version of Adobe Flash Player 11.5.502.110 does not display images in the flash movie.

In the new version of Adobe Flash Player 11.5.502.110 the images are not displayed. In previous versions they are displayed. Tested on several computers. This is not a local problem. This is a problem of Adobe. The bad news is that the early versions are very hard to find and reinstall it.
Many different systems tested. And all browsers.
Now there is no big image.
Example:
http://www.deluxedecor.ru/blog/dvorec_san_susi_letnjaja_rezidencija_fridrikha_velikogo_rok oko/2012-11-01-12
http://www.deluxedecor.ru/index/kollekcija_lepniny_barokko_ehrmitazh/0-45
http://www.deluxedecor.ru/index/karnizy/0-12
and many others.....

hi i have noticed the same problem. also with Chrome and FP ver 11.5.31.2and Firefox and Safari with FP 11.5.502.110
it seems that MovieClipLoader class not returning onLoadInit event. I use to add a fadein function on loadInit to fade in the loaded images. with the latest Flash PLayer versions this is not activated so you cannot see the loaded images.
I have tested this on 3 different systems and the problem is the same. I have not updated my FP for IE. There, the older FP still works well.
test systems
Mac OS LionSafari and FP 11.5.502.110 --- DOES NOT WORK WELL
Windows 7 64 bit
chrome 23.0.1271.95 with FP 11.5.31.2 - DOES NOT WORK WELL
Firefox 16.02 with FP 11.5.502.110 - DOES NOT WORK WELL
IE 9 with FP version 11.4.402.287 - WORKS
Windows XP SP3
Firefox 16.02 with FP 11.5.502.110 - DOES NOT WORK WELL
IE 8 wth FP 11.4.402.287 - WORKS
chrome 23.0.1271.95 with FP 11.5.31.2 - DOES NOT WORK WELL

Download Adobe Flash Player 11.5.502.110

After installing the latest version of Adobe Flash Player 11.5.502.100, I have lost my streaming capabilities: Netflix, radios, videos. The installation completes correctly, but when prompted to click on a selection, the download screen appears again and again. What do I do to get this to work?

Chris: Sorry, I am new to this forum and this is the closest discussion I could find to the problem I'm having. When I turn my computer on, I get the Adobe "notice" that an update is available. I go to the link provided to load the update. The page indicates that the program is "Loading". and that's where it stops. I never get the direction to Install or any other of the prompts. I close out and I still have the old version of Adobe Flash- 11.4.402.287 32 Bit. I have Windows 7 64 Bit. Whatever download I am getting appears to stall my computer. I have to do a System Restore to get my computer to lose whatever "ghost" I'm getting. Can you please give me some direction. I also DO NOT want Google Chrome or McAfee. If this is not the correct discussion, please steer me. Thanks so much.

New Adobe Flash Player 11.5.502.110 is not cooresponding

Recently updated to the Adobe Flash Player 11.5.502.110 and when tried to load images or use program that requires flash a new window prompts me back to the Adobe Flash Player download page. Tried several times, and then uninstalled and retried, even tried clearing all caches, history and retried downloading again and continue to have issue. Any other suggestion to get this back up and running?

Flash Player Help | Installation problems | Windows
Flash Player Help | Installation problems | Mac OS
Mylenium

Adobe Flash Player 11.5.502.16 - Getting anoying messages everytime I enter a website

Hi,
In the last hour I started receiving anoying messages in my browser asking me to download this Adobe Flash Player 11.5.502.16 version. There is a download button in the message which leads me to a supicous website (http://81.4.120.101/FlashInstall.zip) and I don't believe it is from Adobe. The file to download is about 3 MB and it is compressed.
The problem is that I can't do anything and this message keeps appearing and does not allow me to navigate on the sites. I use chrome, win8, have the latest mcafee antivirus installed and could not find much about this issue on Google.
Please, could you help me?
Thanks!
Daniel

I'm betting on something on the NET's side as well.
After changing the DNS on the router to google's the issue disappeared from everything.
I initially thought it was the chrome process I killed, but that doesn't seem reasonable.
It would seem that the DNS change was what caused the issue to disappear and that it was being injected via NET's DNSes into the victim's devices. That's how it managed to appear on IOS and Windows devices alike.
A dude in the kaspersky forum posted a screenshot of the div code: http://s21.postimg.org/npytequyf/flash_virus_2.png
Here's the thread: http://forum.kaspersky.com/index.php?s=fea0705eb0268ba4db2e73bc28fca024&showtopic=276270
Also, a thread on reddit: http://www.reddit.com/r/techsupport/comments/1s1m0b/adobe_flash_player_asking_to_download/
We must not let this die.

Deploying Flash Player 11.5.502.149 errors ...

Similar Messages

Maybe you are looking for