Deploying full Lync client when basic has already been deployed

Hello all,
I have recently purchased licensing for the full Lync client for my userbase. I have already deployed the Lync basic client. Has anyone done the full deployment after the basic? Will the full client remove/update the basic or will I have 2 versions installed?
If so, how can I remove the basic client from the command line as part of the full client installation?
Thanks!

As i tested in my lab. These two version can be installed on the same computer.
But when I install Office 2013, i can't find Lync basic client in All program.
Type Lync basic 2013 in Search programs and files field, the full client starts.
After i uninstall Office 2013, i type Lync Lync basic 2013 in Search programs and files field, Lync basic client starts.
Lisa Zheng
TechNet Community Support

Similar Messages

TS5223 how to sign in different iTunes account when it has already been signed into after restoring the iPhone

how to sign in different iTunes account when it has already been signed into after restoring the iPhone

- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.
To change the login
- Go to settings>Store and sign out and sign into your account.
You may have apps purchased with her account that need updating.

HT5934 With the new ios7 my every time I receive hotmail it shows all mail as unread when it has already been read

With the new ios7 my every time I receive hotmail it shows all mail as unread when it has already been read

I have the same issue with a non-hotmail POP3 mail account. Must be a bug in iOS7 as it worked without a problem in iOS6.
The funny thing is that if you select "Edit (upper right corner of the screen)/Mark All" there is no "Mark as read" choice here, it reads "Mark as unread". So the built-in Mail app knows that the messages has been read. (Note that I use a non-English iOS language setting, so the actual labels may differ).
And the next funny thing is that only the really unread mails (new ones) are marked with the ussual blue dot.
I have already sent a feedback to Apple about it.

Tried to install itunes, on my computer. i used to have itunes on this computer but when i went to install it again an error came up saying that it couldn't delete the old itunes when it has already been installed how do i fix that?

i used to have itunes on this computer once before, but when my old ipod broke i unistalled it. i found my other ipod so decided to reinstall itunes and it comes up with an error saying that it can't delete former itunes files, how do i fix that?

decided to reinstall itunes and it comes up with an error saying that it can't delete former itunes files, how do i fix that?
What's the precise text of the message please, jessica? (There's a couple of different ones I can think of that you might be getting.)

Error occurred in deployment step 'Add Solution': A feature with ID '' has already been installed in this farm. Use the force attribute to explicitly re-install the feature.

Hi I am getting the error
Error occurred in deployment step 'Add Solution': A feature with ID 10495515-2482-41fd-98eb-3c87f739f54b has already been installed in this farm. Use the force attribute to explicitly re-install the feature.
when trying to deploy web parts
question 1 - how do i use the force attribute when deploying from visual studio
question 2 - am i deplying it to the right place, if i deply it to the
url:port that points to my central admin tool it deploys but i cant seem to see it in any of my webs in my site collection, if i deploy it to the
url:port that points to my site collection I get this error.
im new to all this by the way :)
thanks in advance

If you are deploying from Visual Studio then please follow this post:
http://sharepointfordeveloper.blogspot.com/2014/03/solved-visual-studio-issue-error.html
Open the visual Studio and navigate to the feature XML file and add the bellow attribute.
AlwaysForceInstall="TRUE"
The <FeatureName>.Template.Xml output would be some think link this.
<?xml
version="1.0"
encoding="utf-8"
?><Feature
xmlns="http://schemas.microsoft.com/sharepoint/"
AlwaysForceInstall="TRUE"></Feature>

Java.io.IOException:Data has already been flushed to the client

hi,
will u please anyone tell about this exception? its very urgent to me?
i am getting exception when i ma forwarding a page in jsp.
exception is :
java.io.IOException : Data has already been flushed to the client.
my code where i am getting this exception is:
if(filled_var .equalsIgnoreCase("y"))
%>
<jsp:forward page="/editForm.jsp">
<jsp:param name="formNum" value="<%= formNum%>"/>
</jsp:forward>
<%
here i am getting that error. please help me to find a solution in this.

A forward can only be performed if the "response is not committed". The response is committed when:
1) you do a forward
2) enough data is outputted for the buffer to be flushed
3) you flush the buffer manually (or you do an include with a flush="true" for example)
It must be either 2 or 3 in the case of a JSP. So if you output a lot of data before the forward, make sure you try to do the forward BEFORE you output all that data.

Can an iPad 2 be synced on a MAC book Pro when an iPhone has already been synced to it?

How do I sync my iPad 2 to my MAC Book Pro when my iPhone has already been synced to it?
It seems to only recognise the iPhone.

How to use multiple iPods, iPads, or iPhones with one computer

I bought songs on my laptop which synced to my iphone and iPad. But I can't find them on itunes library on my home computer. However, when I click download for the same song it says it has already been purchased. How do I find it on home computer?

I bought songs on my laptop which synced to my iphone and iPad. But I can't find them on itunes library on my home computer. However, when I click download for the same song it says it has already been purchased. How do I find it on home computer?

Is your "home computer" the same as your laptop or are these two different machines?

HT204266 I have a balance on my iTunes gift card but when I try to redeem it, the message says the code has already been used and won't let me go on

I have a balance on my gift card but can't redeem it. When I enter the requested code the message says it has already been used. How do I redeem the amount left on my card?

Hi Rosemarie316,
If you are having issues redeeming your gift card, the following article will help:
iTunes Store: Invalid, inactive, or illegible codes
If you're still unable to redeem your code after verifying the characters in the code, you'll need to contact iTunes Store Support for help. You'll need to provide a digital image of the front and back of the gift card as well as the sales receipt for the purchase of the gift card.
Contacting iTunes Store Support
Go to the iTunes support page and select your iTunes country.
From the iTunes support page, choose Contact Support on the lower-left side of the page.
Follow the instructions to get iTunes Store support assistance.
I hope this information helps ....
Have a great day!
- Judy

I went to icoke.ca and entered my pin to get a free song, but when I went to itunes to redeem it, its says that my code has already been used. Help!

I went to icoke.ca and entered my pin to get a free song, but when I went to itunes to redeem it, its says that my code has already been used. Help!

It wont even accept my icoke pins! when I enter them (and there are two on the inside of the cap) it says its an invalid pin.. Other places online says this offer expired March 31, but on the bottle cap it says 12/31/2011 so I dont understand,. Why do you offer a free itune when one cant access it?

I am not able to copy Keynote and Numbers to iTunes from my phone. Message says that my Mac isn't authorized. When I authorized it, it said my Mac has already been authorized. Why??

I have purchased Keynote and Numbers via my iPhone recently with payment details different from the one I usually use. When I synced my phone with iTunes, a message popped out stating that my Mac isn't authorized and advised me to do so which I did and another message popped out informing me that my Mac has already been authorized. However, when I tried syncing again, the same former message popped out again. I have even disauthorized my computer and authorized it again but still get the same message.
What is wrong? And what can I do to rectify this?
Both have the latest iOS, by the way......

http://www.thexlab.com/faqs/trash.html
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

When I try and redeem my music card, it says it has already been used

when I try and redeem the iTunes Music Card, it says that the card has already been used, but the amount in my account does not go up! please help!

welcome to discussions, we are fellow users.
For a problem like that, you will have to email iTMS cusotmer service
http://www.apple.com/support/itunes/musicstore/musiccard/

I have been trying to open itunes that has already been installed. But, the thing is it never opens and when i do right click and trouble shoot also, it doesnt open. I dont whats wrong with itunes and my comp is 64 bit windows 7. Can somebody please help

I have been trying to open itunes that has already been installed. But, the thing is it never opens and when i do right click and trouble shoot also, it doesnt open. I dont whats wrong with itunes and my comp is 64 bit windows 7. Can somebody please help

no its 64 bit version of itunes. Can you please help me. I am not able to sync my iphone.

Problem when creating a calculated column "Item has already been added"

Hi,
I built an a set of lists and custom content types which are made available under http://moss/callcenter. When I want to create a new calculated column for one of my custom content types i get the following error
Item has already been added. Key in
dictionary: 'Strasse_Strasse' Key being added: 'Straße_Straße'
This is rather strange as I don't even get as far as creating that new column. The error occurs right when I select the type calculated column, even before I enter a name for the new column. How ever, when I want to create a calculated column in root site collection (http://moss/) this error does not occur and I can create the new column.
Any ideas anyone?
Thank you,
Christoph

hi,
you can try below thing
http://blogs.msdn.com/b/timquin/archive/2009/02/11/sharepoint-item-has-already-been-added-key-in-dictionary-484-key-being-added-484.aspx
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

ODM Client Error: Error Message: Attribute has already been added

I'm getting the following error message in the ODM client (I've substituted an elipsis for the attribute name below.)
Error Message: Attribute ... has already been added to LogicalDataSpecification.
Exception type: oracle.dmt.odm.InvalidArgumentException: Attribute ... has already been added to LogicalDataSpecification.
Stack trace:
oracle.dmt.odm.InvalidArgumentException: Attribute ... has already been added to LogicalDataSpecification.
at oracle.dmt.odm.data.LogicalDataSpecification.addAttribute(LogicalDataSpecification.java:251)
at oracle.dmt.dm4j.wizard.director.minings.ModelBuildBuilder.buildLogicalDataSpecification(Unknown Source)
at oracle.dmt.dm4j.wizard.director.minings.RegressionModelBuildBuilder.createFunctionSettings(Unknown Source)
at oracle.dmt.dm4j.wizard.director.minings.ModelBuildBuilder.getMiningTask(Unknown Source)
at oracle.dmt.dm4j.wizard.director.minings.MiningBuilder.run(Unknown Source)
at oracle.dmt.dm4j.browser.ProgressBar.run(Unknown Source)
at java.lang.Thread.run(Thread.java:534)
Anyone have any ideas what is causing this?
-- Joseph

OK, I figured out what happened. I was using the multi-case format. I had two attributes with similar names, on in all caps, and one in mixed case... attribute names are not case sensitive, so the algorithms became confused.
If anyone from Oracle is monitoring this forum, I would suggest adding a note to the documentation noting that the algorithms are not case sensitive, so you should make sure that your attribute names are all unique per observation.

Deploying full Lync client when basic has already been deployed

Similar Messages

Maybe you are looking for