Deploying mediation servers in a pool from 2 different location in a mediation pool

Hi All , Good day
Can anyone suggest me the better approach in deploying a new mediation server in a branch location
we are planning to deploy a new mediation server in location 2 (lync 2010)
Adding the new mediation server in location 2 to the existing Lync Mediation pool in Location 1 (pool already has 2 servers) –
Will it cause any quality issue to existing location 1 users / any additional considerations ? (i mean the mediation pool will have 3 servers - 2 from same location , 1 from other location)
Creating a new mediation pool for location 2 à associate it with location 1 FE pool
à but no new PSTN gateway
à can we use the existing one with a new DNS name ?

Hi Rajbabu,
Mediation Servers at the central site can be used to route calls for IP-PBXs or PSTN gateways at branch sites. If you deploy SIP trunks, however, you must deploy a Mediation Server at the site
where each trunk terminates. Having a Mediation Server at the central site route calls for an IP-PBX or PSTN gateway at a branch site does not require the use of media bypass. However, if you can enable media bypass, doing so will reduce media path latency
and, consequently, result in improved media quality because the media path is no longer required to follow the signaling path. Media bypass will also decrease the processing load on the pool.
Click the link below for more information.
Deployment guidelines for Mediation Server in Lync Server 2013
http://technet.microsoft.com/en-us/library/gg398622.aspx
Best regards,
Eric

Similar Messages

Launch business rules simultaneously from multiple different locations?

Hi All, Thanks in Advance !!
I need to launch business rules simultaneously in Hyperion planning from different multiple locations..
So ,Is there any trouble if i launch a business rule simultaneously from 4-5 locations on same planning application through workspace.
Thanks
Vivek Jaiswal

If you are running the same business rule multiple times then it is trying to calculate and access the same section of the essbase database or are using different RTPs, is this really what you want to do.
You can certainly run multiple rules, I take it you are doing some sort of load testing.
Cheers
John
http://john-goodwin.blogspot.com/

All of a sudden Safari cannot connect to server when I go on certain websites. But when I tried these websites on the same computer from a different location they opened fine.

I used to go on several websites without a problem, one being www.udel.edu/udsis but now all of a sudden when I try to open these websites it says "Safari can't connect to server". At first I thought my computer had the problem, but when I tried the other mac in my house I had the same issue. The next day I visited family in another state and brought my computer with me, I typed those website addresses in and they opened without a problem. But now I'm back at home and I still can't open those websites. What gives?

Leads one to suspect an ISP issue. Yours. Perhaps for the moment though. In any case I like to use OpenDNS servers for safety and speed.
System Preferences>Network>Advanced>DNS
In the left side column click on the + sign and insert the following:
208.67.222.222
208.67.220.220
Click OK, then click Apply.
Info on OpenDNS:
http://www.opendns.com/

How can I remotely access my computer from a different location on Apple Remote Desktop?

I downloaded Apple Remote Desktop and am trying to access our computer at our church that is in the auditorium and work on slides for ProPresenter from my office which is on a different network. The Mac Pro, which is in the auditorium, is connected to a Netgear wireless router. I would also want to be able to have access to observe and control the screen on the Mac Pro whether I am in my office or at my house. I have tried everything from going to portforward.com, followed those instructions, did port forwarding, used ipchicken.com to get my external IP and made sure that the Mac Pro had a static internal IP address and made sure the computer had access for remote management. Any help to resolve this issue would be greatly appreciated! Works fine when it is on the same wireless network, but I need access being on a different wireless network. Thanks!

Hi austinmac14,
So the steps listed bellow assume some things. They assume that the Airport Extreme Router your configuring is connected directly to the internet connection. And that the Airport Extreme is the only router between your computers and the internet.
That means we're talking about say a DSL modem plugged directly into the Airport Extreme, or a cable modem. in ether case, this assumes that said modem, is not acting as an internet router.
If your modem has multiple ethernet ports on it, or has a little antenna sticking out of it, then your modem is probable also a router, and these steps listed bellow will probable not work.
Also these steps are so one person, can connect to one computer at your work.
Open Airport Utility:
go to the dock
Click on the finder
go to the menu bar
Click on the "Go" menu
Chose "Utilities" from the "Go" Menu
double Click on "AirPort Utility"
Access the Base Station:
Double Click on your Airport Extreme BaseStation that is your internet connection router.
a new window should pop up with your Airport Base Station as the Window Name
Configure Static Address for the computer you want to connect to via ARD:
Click on the internet Icon from the toolbar
Click on the "DHCP" tab
For "DHCP Reservations:" Click on the "+" button
For the "Description" put "ARD"
For "Reserve Address by:" set "DHCP Client ID"
Click the "Continue" button
For "DHCP Client ID:" set "ARD"
write down the number in "IPv4" address field
Click the "Done" Button
Configure routing to ARD computer:
Click on the "Advanced" icon from the tool bar.
Click on the "Port Mapping" tab
Click on the "+" button
for "Service:" Chose "Apple Remote Desktop"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8)"
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Apple Events"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Login - SSH"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "Update" button.
wait for the Airport Extreme to update, and for your computer to reconnect to the airport extreme. (make sure you can load and browse websites.)
Configure the ARD computer to use the correct IP address:
Go to the computer you want to be able to remotely connect to
On that computer, Go to the menu bar
Chose the "Apple" menu bar
Chose "System Preferences…"
Click on the "Show All" button
Click on the "Network" icon
For the active network connection, (the connection on the left side with the green dot), click on it
Clock on the "Advanced…" button
Click on the "TCP/IP" tab
for the "DHCP Cient ID: field put "ARD".
Click the "OK" button
Click the "Apply" buttonNOTE: Under "Status" you should see "(connection name) is connected to (airport base station name) and has the IP address (IP address)." the "(IP address)" address displayed should match the IP address you wrote down in step "3. 8."
Find out what your public internet IP address is.
On the computer you wish to connect to over the internet, gotohttp://whatismyipaddress.com/
when the web page loads, you should see "IP Information:" fallow by a number like 192.168.0.1, write down what ever number it is.
At this point you should be able to connect to the computer remotely
connect to the internet from another location.
open Apple Remote Desktop
go to the file menu
chose connect to computer using ip address
set the address to the address to the IP address you wrote down for step 6. 2.
use the same password as you used to connect to the computer at work using ARD.
So here the catch. If your router gets reset... well then your going to have to configure it again. Also all the same rules you have to connect to the computer at work, also apply to connecting to the computer from over the local network. That means your computer need to be on or sleeping. And if it's sleeping it need to be configure to wake for network access.
Also some network connections change. When it comes to internet connections, some connections are static IP, while other connections are DHCP. If your connection is static... great! if it's DHCP, your address may change. If it dose.. well then your ability to connect will break. And then you'd have to do step 6 & 7 again.
Of corse there are ways around this. But that's kind of another conversation.
Some internet locations may block your ability to connect to your computer at work. This is very common at schools, and companies. Basically any place that tries to control your ability to browse the internet, may block remote access to computers; because a remote computer would completely by pass their web filter.
ALSO there is an easier option. As far as setup. There are programs designed to make remotely accessing your mac as easy as possible. For instance there is LogMeIn or Slack. With both of these programs, it's simple. make sure your computer is always on. Then install the software. Create an account with the service. And then you can connect to the computer almost any where by going to their website.
This option requires no router configuration. It handles DHCP. It's designed to work in as many locations as possible.

Create object from a different location

I have a script object under Variables called Library. In it, I have a cat object:
function Cat(name) {
this.name = name;
this.talk = function() {
app.alert( this.name + " meow" )
I want to instantiate an instance of Cat from form.initialize.
If I do var myCat = new Library.Cat("Oscar"); I get exception.

rman target /
catalog start with '/other/archivelog/location';
backup archivelog like '/other/archivelog/location/%' ... ;

HT4528 is there a way to erase everything/reset my iPhone 4 from a different location?

i need to erase all info, texts, call history, etc. from my phone and i dont have the phone. Is this possible and how?

It does, however require that you have iCloud signed on on the device, and Find My iPhone turned on in iCloud. I presumed that since that is what I had specified to the OP, that the response (incorrectly stated as it was), was referring to that caveat....
But....maybe not.....
GB

BPM 11g setting up Oraganization Roles from different locations

Hi,
Our BPM process has 2 Roles Requester and Reviewer. We have Requesters in US, ASIA and CANADA, the same with Reviewers also. So Requester from US creates the task and submits the task. This task should go to Reviewer from US. How can we achieve this? And also, the Requestors/Reviewers in one location should not be able to view tasks created by Requestors/Reviewers from a different location.
Appreciate your inputs.
MC

Keep the users of different regions in different Groups. Like Requesters_APJ, Requesters_EMEA and Approvers_APJ, Approvers_EMEA.
Add a script activity to "somehow" figure out the region of the "Requester" user. Based on this, dynamically change the assignee of the next task i.e. the Requester task to the Approver group for that region.
Good practice -> At design time, avoid mapping swimlanes to Users, Roles or Groups. Do this after deploying the process/workflow from the EM console. Another way is to do the dynamic assignment as I mentioned.
Hope this helps.

I am trying to configure two WRV200 from 2 different loca...

I am trying to configure two WRV200 from 2 different location and ADSL
accounts. One location has PPPoE and the other has PPPoA. Both of it are
having a Speedtouch 356 6V modem. The router which using PPPoE and having a DDNS from TZO.com has no problem with the Quick VPN but the router which using a PPPoA connection could not able to connect even the quick VPN.
There is an option to ridirect the Public IP of Speedtouch to other network device and I manage to configure it and now my router who is having a PPPoA connection has a Public IP. But still the same problem VPN still not working.
Is there any chance that I could make this router work with the PPPoA connection. I will really appreciate if somebody could help me with this problem.

Sorry for making you confuse. Here is the VPN log details of the 2 routers.
Router 1:
000 "TunnelA": srcip=unset; dstip=unset; srcup=ipsec _updown; dstup=ipsec _updown;
000 "TunnelA": ike_life: 28800s; ipsec_life: 3600s; rekey_margin: 5s; rekey_fuzz: 100%; keyingtries: 5
000 "TunnelA": policy: PSK+ENCRYPT+TUNNEL+PFS+UP+AGGRESSIVE; prio: 24,24; interface: eth0; 000 "TunnelA": dpd: action:hold; delay:30; timeout:120;
000 "TunnelA": newest ISAKMP SA: #0; newest IPsec SA: #0;
000 "TunnelA": IKE algorithms wanted: 5_000-1-2, flags=strict
000 "TunnelA": IKE algorithms found: 5_192-1_096-2,
000 "TunnelA": ESP algorithms wanted: 3_000-1, flags=strict
000 "TunnelA": ESP algorithms loaded: 3_000-1, flags=strict
000 #12: "TunnelA":500 STATE_AGGR_I1 (sent AI1, expecting AR1); EVENT_RETRANSMIT in 9s; nodpd
000 #12: pending Phase 2 for "TunnelA" replacing #0
Router 2:
000 "TunnelA": srcip=unset; dstip=unset; srcup=ipsec _updown; dstup=ipsec _updown;
000 "TunnelA": ike_life: 28800s; ipsec_life: 3600s; rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 3
000 "TunnelA": policy: PSK+ENCRYPT+TUNNEL+UP+AGGRESSIVE; prio: 24,24; interface: ppp0;
000 "TunnelA": dpd: action:restart; delay:30; timeout:120;
000 "TunnelA": newest ISAKMP SA: #0; newest IPsec SA: #0;
000 "TunnelA": IKE algorithms wanted: 5_000-1-2, flags=strict
000 "TunnelA": IKE algorithms found: 5_192-1_096-2,
000 "TunnelA": ESP algorithms wanted: 3_000-1, flags=strict
000 "TunnelA": ESP algorithms loaded: 3_000-1, flags=strict
000 #3: "TunnelA":500 STATE_AGGR_I1 (sent AI1, expecting AR1); EVENT_RETRANSMIT in 8s; nodpd
000 #3: pending Phase 2 for "TunnelA" replacing #0
Hope this could help you.

HT204053 can this be used to run 1 spreadsheet from 5 different users imputting information

can icloud be used to track information being put in one spreadsheet from 5 different locations?

Hi there clv implants!
I have an article here that can explain to you a little more about iCloud and can inform you about documents in the cloud:
iCloud: Access iWork documents stored in iCloud
http://support.apple.com/kb/ph2704
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Dynamic Routing? how to read files from 2 different directories?

i need to do that..pick files but from 2 different locations..
any simple idea?
yes, the best simple is to have 2 bpels listenening to each directory...
can i create only 1 BPEL?
i heard about Dynamic Routing...too complex?
Thanks!
Pablo.

Hi,
I guess you can try it with Pick as the initial activity( With Create Instance Checked) and you map your two File Adapter to two On Message branches..
I guess this should work but i am not sure how far this is reliable.. with Pick..
Worth giving a try..
Thanks,
Jp

Loading "font.properties" from different location

Is it possible to tell the JVM to load "font.properties" files from a different location instead of "$JAVA_HOME/jre/lib"?
Thanks in advance.
Regards.

Is it possible to tell the JVM to load
"font.properties" files from a different location
instead of "$JAVA_HOME/jre/lib"?
Thanks in advance.
Regards.I am also looking for a solution for this, since it's not a good idea to modify the JRE itself.
Could anybody help? Thanks.

Monitoting services from different location then I have SCOM 2012 R2

Hello
I am interested in the ability to monitor services (particularly
in the Exchange OWA) from a different
location than I have placed SCOM
server. I environment of
different networks and branches. I don´t want to pay for
GSM (Global Service Monitor)I there some kind of "probe" or
simplified SCOM? I do not have
the opportunity to take in every branch of
such a great performance on SCOM, connnectivity speed between branches is not problem.
thanks a lot

Thomas,
there is no need for a fileshare. You could let the ps1 below run natively in a SCOM PowerShell worklow and it will provide the data in so called property bags:
param(
$monitorComputer,
$monitorURL
Invoke-Command -ComputerName $monitorComputer -ArgumentList $monitorURL {
$result = Invoke-WebRequest -URI $monitorURL
Return $result
# Return the values from CMDLET
$bag.AddValue("Workflow Computer",(hostname))
$bag.AddValue("Monitoring Computer",$monitorComputer)
$bag.AddValue("Monitor URL",$monitorURL)
$bag.AddValue("Status Code",$result.StatusCode)
$bag.AddValue("Status Description",$result.StatusDescription)
$bag
You could now create your own MP running a PowerShell monitor.
Or you can implement the following solution to being able to use the wizard:
http://blogs.msdn.com/b/wei_out_there_with_system_center/archive/2013/10/03/opsmgr-using-wizards-to-create-powershell-based-monitors.aspx
Cheers,
Patrick
Please remember to click “Mark as Answer” on the post that helped you.
Patrick Seidl (System Center and Private Cloud)
Website: http://www.syliance.com
Blog: http://www.systemcenterrocks.com

Sync group down? All my agents from different locations offline in same time.

Now is 2014-10-17, 10:22PM EST. Portal shows all my agents from 3 different locations offline. The last sync was done at around 8:30. I've confirmed my agents are online, and they can successfully ping service. Last nite was another nightmare, it look more
than half an hour for a sync cycle. Went back to normal all the suddent at 4am early morning.
What's going on?
Thanks,
Dan

Hi,
Thanks for your reply.
The service went back to normal at 1AM EST. It was down for 4 hours 30mins. But the service interruption is just too sudden and frequence as I said it went down on Thursday (16th Oct) night as well.
Here's my sync group info.
Sync group ID : a0d2cc7b-3a3e-481f-a3b5-be26a373fd5a_Southeast Asia
Region : Southeast Asia
Date time of the issue : 17th OCT 8:30PM EST to 18th OCT 1:00AM EST
Traing ID : No error found from logs since the sync group didn't work at all. It showed all of my agents offlined. And the sync group showed "Warning"
Please let me know if you need additional info. Thanks.
Dan

Why does PSE 10 Organizer jumble up photos on the same date from different locations ?

I have PSE 10 installed on a PC with Windows 7. My camera is a Nikon D90 using a Sandisk 8 gb SD card. When I take photos at different locations on the same date and download them into the Organizer , instead of keeping the photos from the different locations together by location, it jumbles them all up. It does not keep them in order by time taken from first to last for that day , it just mixes them all up in random order. Why ?

Hi Lyndy,
When you use Albums and Keyword Tags, you aren't moving the images around (they stay in their folders) - you just look at them differently.
What you can try is this:-
1) select one of your folders in folder view so that it displays all of those images in filename order
2) click on the instant album button (to the top right of the thumbnails)
This will generate an album with the same name as the folder
3) Now switch to Thumbnail view
4) click on the new albumb name on the right side
Now, all the images should be in date/time order - you may have adjust the options
The real power of the Keywrd Tags is the many different ways you can look at the images.
If you have a Keyword Tag structure like this:-
Places
     Scotland
            Holyrood
            Britania
Then if you assign the Holyrood and britania tags to the appropiate photos, there are various ways of viewing the photos.
Selecting just Holyrood would show only the Holyrood ones
Selecting Scotland would show both Holyrood and Britania ones.
The only limit seems to be your own imagination
I hope that gives you ideas rather than adding confusion
Brian

Front End servers within same Pool on different subnets

The customer is looking to have Amazon AWS host Lync 2013, and despite Lync 2013 having built in HA via Pools, Amazon wants to split the Pools across two of their availability zones (AZ ). An AZ is nothing more than a metropolitan area network, or simply
a data center located a few miles away. Essentially they want to split the Pools between their two AZs.
I know that for Lync 2013, the only stretch Pool supported is the Persistent Chat server Pool, and that Front End Pools, Edge Pools, or Mediation Pools are not supported.
Amazon states that the latency between their AZs is from 1 - 5 ms, which is well within tolerance, though they state that the AZs all have unique subnets.
I know that none of this is supported, though I am being requested as to why it isn't.
Forgetting about latency, is this not supported because all servers within a Pool must share the same IP subnet? Is this coded within Lync that only Pools within the same subnet will work? I think it is as with Lync 2010, a stretched VLAN was required for
a FE Pool to work, which implies the same subnet.
While on this, a Central site does not mirror that of an AD Site, where a Central Site is a reflection of Pools within an area. So can a Central Site span two AD sites? I believe the answer is yes when one considers that a remote branch office can also be
its own AD site. The reason for asking this question is I am attempting to see if if the Central Site might also have something to do as to why stretched Pools aren't supported.
Thanks!
Christian
Christian Frank

Hi Guys,
Just saw both of your responses. I totally agree that it isn't supported, and what Amazon has been proposing is essentially adding their HA via a redundant AZ so that their infrastructure is redundant, which is their HA (I don't agree!).
What I am looking for is something a bit deeper as to why. For example, when Lync 2010 had the stretched FE Pool between two locations, it was done via a stretched VLAN, which implies that the servers on both ends must be on the same subnet.
Amazon wants to stretch all the Pools, between their data centers, so they can say that the Lync infrastructure is highly available, though at each data center, the subnets will be different, and that is what I am attempting to validate.
I know this isn't supported, though is it because the members within the pool would come from different IP subnets, and Lync 2013 is coded to expect fellow members to be within the same subnet? That essentialy is what the case of Lync 2010 FE Pools was when
they stretched them. And if you go back to Exchange 2007, stretched VLAN was back then a way to create geo-clustering also, which is no longer the way.
Frankly, I think it has to do with subnet, and I believe it has to do with how the Windows Fabric is written, and what it is expecting to see. I really think this is the case, which explains the whys as to how stretched Pools are no longer supported any
longer. Yes?
Thanks!
Christian Frank

Deploying mediation servers in a pool from 2 different location in a mediation pool

Similar Messages

Maybe you are looking for