Deploying Office 365 Pro Plus using System Center Configuration Manager 2012 SP1

Hello,
I am trying to deploy Office 365 Pro Plus to my client machines (more than 100) via. System Center Configuration Manager 2012 SP1. It will use one administrator account for installation. But as per the licensing, we can install Office for up to 5 PCs/Macs
and 5 more Windows tablets/iPads with one Office 365 Pro Plus licenses. If this is the case, then I cannot install Office 365 Pro Plus with one admin account to my 100+ machines, as it will violate the licenses of O365 Pro Plus.
So, what is the alternative approach?
Thanks
Raj

If this is the case, then I cannot install Office 365 Pro Plus with one admin account to my 100+ machines, as it will violate the licenses of O365 Pro Plus.
Hi,
this is incorrect.
There is no licensing restriction/control for the *installation* account at all, the licensing is related to who is *using* Office365ProPlus *after* installation is performed. This control, is implemented by the Microsoft Account, or OrgID, used to sign-in/activate
to Office365 when *using* Office365ProPlus.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

Deploying Office 365 Pro Plus on Systems with Existing Office 2010 / 2013 Installations

We're preparing to deploy Office 365 Pro Plus with our existing SCCM 2012 infrastructure. Many of our clients currently have Office 2010 or Office 2013 installed on them. What is the default setup behavior for installing Office 365 Pro Plus on these systems?
Will any versions of Office be removed first?
Orange County District Attorney

Hi,
As a supplement to what you have got, Click-To-Run is a Microsoft virtualization technology which provides an isolated environment for Office to run on your computer. It allows you to run the latest version of Office side-by-side with an earlier version
of Office that is already installed on your computer.
For more details, please refer to:
http://technet.microsoft.com/en-us/library/jj219427(v=office.15).aspx
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Deploy Office 365 Pro Plus using MDT 2013

Hello,
I'm currently evaluating O365 E3 and am specifically looking into what my options are for deploying Office 2013 Pro Plus when rolling out a new PC image. Currently I use MDT 2013 to deploy the image to new PCs and install Office 2010 along with other
applications. Can I use C2R with a config file pointing to a local repository of the installation files with MDT 2013?

Hi
This blog post by Rens will help you:
http://renshollanders.nl/2014/02/office-365-automatic-deployment-of-office-365-with-mdt/

Deploying Office 365 Pro Plus via SCCM

Hi
I am trying to deploy Office 365 Pro Plus via SCCM, I followed this process https://gallery.technet.microsoft.com/How-To-Deploying-Office-70e8b1eb#content , we don't use the application catalogue but I made the application available to be run via system
center.
Though can't get it deployed, I keep getting some errors about checking internet connections ...though I can run the command manually and it'works.
Does anyone managed to install it via SCCM ?

Thank you for the reply,
Where I am lost is where it downloads the Office C2R from ?
Logs from the Temp folder
03/04/2015 10:51:15.947 SETUP (0xf10)
0x107c Click-To-Run
anhmm Medium
Prereq::PrereqsFailed: No prereqs have failed.
03/04/2015 10:51:16.228 SETUP (0xf10)
0x107c Click-To-Run
aoh9t Medium
TryLaunchClient::HandleStateAction: Launching OfficeClickToRun.exe with parameters: scenario=unknown acceptalleulas="True" cdnbaseurl="http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675" productreleaseid="none"
displaylevel="False" culture="en-us" baseurl="C:\WINDOWS\ccmcache\5l" lcid="1033" platform="x86" updatesenabled="False" o365proplusretail.excludedapps="access,groove,lync,project,sharepointdesigner,visio"
version="15.0.4675.1003" productstoadd="O365ProPlusRetail_en-us_x-none" trackedduration=280
03/04/2015 11:01:12.393 SETUP (0xf10)
0x107c Click-To-Run
aoh72 Medium
ExitBootStateMachine::HandleStateAction: Bootstrapper workflow exiting with result: 0x0
Logs from SCCM AppEnforce shows this (can't see it failing)
<![LOG[+++ Starting Install enforcement for App DT "Install - Microsoft Office 365 ProPlus" ApplicationDeliveryType - ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, Revision - 7, ContentPath
- C:\WINDOWS\ccmcache\5l, Execution Context - System]LOG]!><time="10:50:45.222-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:1702">
<![LOG[ A user is logged on to the system.]LOG]!><time="10:50:45.243-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:2083">
<![LOG[ Performing detection of app deployment type Install - Microsoft Office 365 ProPlus(ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, revision 7) for system.]LOG]!><time="10:50:45.247-600"
date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:2148">
<![LOG[+++ Application not discovered. [AppDT Id: ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, Revision: 7]]LOG]!><time="10:50:45.287-600" date="03-04-2015" component="AppEnforce"
context="" type="1" thread="5596" file="localapphandler.cpp:291">
<![LOG[ App enforcement environment:
Context: Machine
Command line: Setup.exe /configure Install.xml
Allow user interaction: No
UI mode: 1
User token: null
Session Id: 1
Content path: C:\WINDOWS\ccmcache\5l
Working directory: ]LOG]!><time="10:50:45.288-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appcontext.cpp:85">
<![LOG[ Prepared working directory: C:\WINDOWS\ccmcache\5l]LOG]!><time="10:50:45.290-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appcontext.cpp:189">
<![LOG[ Prepared command line: "C:\WINDOWS\ccmcache\5l\setup.exe" /configure Install.xml]LOG]!><time="10:50:45.340-600" date="03-04-2015" component="AppEnforce" context="" type="1"
thread="5596" file="appcontext.cpp:338">
<![LOG[ Executing Command line: "C:\WINDOWS\ccmcache\5l\setup.exe" /configure Install.xml with user context]LOG]!><time="10:50:45.341-600" date="03-04-2015" component="AppEnforce" context=""
type="1" thread="5596" file="appexcnlib.cpp:201">
<![LOG[ Working directory C:\WINDOWS\ccmcache\5l]LOG]!><time="10:50:45.341-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appexcnlib.cpp:215">
<![LOG[ Post install behavior is BasedOnExitCode]LOG]!><time="10:50:45.529-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appcommon.cpp:1094">
<![LOG[ Waiting for process 3856 to finish. Timeout = 120 minutes.]LOG]!><time="10:50:45.533-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596"
file="appexcnlib.cpp:1958">
<![LOG[ Process 3856 terminated with exitcode: 0]LOG]!><time="11:01:12.428-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appexcnlib.cpp:1967">
<![LOG[ Looking for exit code 0 in exit codes table...]LOG]!><time="11:01:12.429-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appexcnlib.cpp:505">
<![LOG[ Matched exit code 0 to a Success entry in exit codes table.]LOG]!><time="11:01:12.430-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appexcnlib.cpp:584">
<![LOG[ Performing detection of app deployment type Install - Microsoft Office 365 ProPlus(ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, revision 7) for system.]LOG]!><time="11:01:12.621-600"
date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:2148">
<![LOG[+++ Application not discovered. [AppDT Id: ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479, Revision: 7]]LOG]!><time="11:01:12.739-600" date="03-04-2015" component="AppEnforce"
context="" type="1" thread="5596" file="localapphandler.cpp:291">
<![LOG[++++++ App enforcement completed (627 seconds) for App DT "Install - Microsoft Office 365 ProPlus" [ScopeId_2A03C658-AF66-44B9-85ED-4FADE04A803B/DeploymentType_5a39078c-a7a3-438c-af16-0cb0a0674479], Revision: 7, User
SID: ] ++++++]LOG]!><time="11:01:12.748-600" date="03-04-2015" component="AppEnforce" context="" type="1" thread="5596" file="appprovider.cpp:2448">

System Center Service Manager 2012 SP1 upgrade install error

I am trying to upgrade my SCSM 2012 front end app server to SP1 and am getting these failures in the log when it fails with the error "Service Manager is not in a valid state"
09:07:58:Could not find WCS portal web site in IIS metabase!
09:08:02:***ERROR*** Microsoft System Center 2012 - Service Manager: Microsoft System Center 2012 - Service Manager is not in a valid state.
09:08:02:Application Ended
09:08:02:-222
Can someone tell me how to get this rectified? The WCS portal is installed and running and has been for months. The DW is upgraded but I cannot get the SharePoint self service portal or the App server to upgrade due to this error.

Hello
One question you have the website installed on the same
server on which you have the Server Management
Server, so if you can
not make your upgrade to
SP1, this changed because
a prerequisite of System Center Service
Manager 2012 SP1 in which you can not have
the server Mangement and
website on the same server they have to be
separate.

VHD for System Center Configuration Manager 2012 R2

I just downloaded of TechNet the VHD of System Center Configuration Manager 2012 R2. However when you bring it online it is in the domain Conteso. I have searched all over TechNet and the web, but there is no record of the admin password nor is there
any documented instructions with the download.
http://www.microsoft.com/en-us/download/details.aspx?id=40840
Best regards,
Dave Clauson
Partner Online Technical Community
We hope you get value from our new forums platform! Tell us what you think:
http://social.microsoft.com/Forums/en-US/partnerfdbk/threads
This posting is provided "AS IS" with no warranties, and confers no rights

Hi,
I think you should find the password for Windows Server 2012 R2. Please try
R2Preview!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Microsoft System Center Configuration Manager 2012 R2 Reports

Hi ;
I can't run any reports on microsoft system center configuration manager 2012 R2. I see " No items found " when i click reports on microsoft System Center Configuration manager 2012 Console.But i access all reports by internet Explorer. End of
all , i don't have any problem with queries.I am waiting for your helps.
Sincerely yours ,

Hi,
It sounds like this should be the solution for you, changing the account for the SRS service.
http://blog.coretech.dk/rja/no-srs-reports-showing-up-in-sccm-console/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Deploying Office 365 Pro Plus from a network share?

I have setup a network share to install to a number of users, who I have applied licensing to and have created a script to run the setup with the xml configuration file.
The install runs completely fine, installs the 365 Pro Plus, but when the user goes back and starts a program, I get the activation needed button and the user clicks on it and up comes the Install product page that redirects to their online account and asks
for the Office to be installed again.
Here is my xml config file. Is the autactivate portion correct?
<Configuration>
<Add SourcePath="\\leo\office365" OfficeClientEdition="32" >
<Product ID="O365ProPlusRetail">
<Language ID="en-us" />
</Product>
</Add>
<Display Level="Full" AcceptEULA="TRUE" />
<Logging Path="%temp%" />
<Property Name="AUTOACTIVATE" Value="1" />
</Configuration>

Hi,
As per the description, I understand that you are having issues with Office 365 activation after the installation.
I have tested this on my own machine (with a similar configuration.xml file). It works well if I enter the correct email address that's associated with this Office subscription.
Does this affect all users (email address)? I'd first suggest you check if you've installed the correct version of Office that's associated with these user accounts.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

SCCM 2012 : Deploying System Center Configuration Manager 2012, Required Desinging Help.

Hi,
I required some one to help designing an SCCM 2012 Solution. I dont have any knowledge on Design Part, This is my first deployment
My goal: Interconnect 3 remote offices and The infrastructure is as follows:
Primary Site Server ( HQ ) : 1000 users
Secondary Site ( Location1) : 2000 Users
Secondary Site ( Location2) : 2000 Users
Link Between Primary and Secondary Sites : 8 MBPS MPLS link
Database will be installed on a remote SQL 2012 Server.
Please let me know is there any tool to generate Design document.
If possible please design and put the Image on the blog.

Why using a remote SQL server? I'd install it locally. There is no tool available.
Just make sure that you are using a standalone primary site (therefore no CAS) and place a secondary at location 1 and 2.
Torsten Meringer | http://www.mssccmfaq.de

System Center Configuration Manager 2012 R2

In site configuration > Sites > configure Site Components > Software update point > Products
How come I do not see Server 2012 R2, I see Server 2012?

The first SUP sync has to be successfull in order for those products to appear. Have you already examined wsyncmgr.log?
Torsten Meringer | http://www.mssccmfaq.de

Any Limits to using BranchCache with Configuration Manager 2012 SP1 or R2

Have a client looking to leverage the Branchcache feature in their office locations, over 1000 with numbers ranging from 2 - 40 in size. There would be 2 - 4 central Primary distribution points servicing these clients in the 1000+ offices.
Do I need to look at requesting them to make changes to their design to have more distribution points to allow more branchcache clients to connect, are there any limitations?
I am aware the content is un managed (self managed no control) so the distributions may go over the links more then once.
Also aware that this would autoset a branchcache on each subnet even though it is a single location, but has multiple subnets.
Thanks,

Have a read about our BranchCache addons after reading our FAQ, for others just wanting some info:
1. Yes the servers needs to have the same key to ensure that hashes are compatible for all servers (i.e. the same)
2. Reporting will show how efficient it is:
http://2pintsoftware.com/portfolio-items/branchcache-reporting/?portfolioID=10528
3. Yes its per Subnet

Office 365 Pro Plus Security Update User Permissions - Sccm

I plan to deploy Office 365 Pro Plus using Sccm 2012. My configuration setup file has this line Updates Enabled="TRUE" UpdatePath="Share" . My users are not local administrators of their workstations. If I update the office
share with a patch, will my users have permissions to install the update? If not then how will my users get updated?
Steve Bender

Hi Steve,
Yes, with this confirguration, every Office 365 client will automatically check updates from the update location configured during setup - "Share", in your case.
You should make sure that it's a share (like an internal UNC or HTTP path) that every Office 365 client has permission to access.
Here's the references you'll need:
Managing Updates for Office 365 ProPlus – Part 1
Managing Updates for Office 365 ProPlus – Part 2
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Setting the shared templates location by Deploying Office 365 Midsized Business "using a network share" from a on-premise location

I found the question "Deploy Office 365 pro plus using a network share or from a on-premise locaiton" the most useful of the resources
on MS yet - but I am having difficulties getting the files to download for a local deployment.
The root of the issue, that I cannot find anywhere, is how do I set the shared templates location for users in the organization. First I thought a GPO, but I cannot find that setting in the GPO in MS.
Then I thought modifying the REG- but it is in a binary key which could include other information I may not want modified(Or does it matter?)
Then I looked for ways to download the deployment but launching from an elevated prompt as IT (Domain level) returns a useless error to paraphrase- 'sorry MSOffice didn't install- do you have enough disk space'.
I have downloaded the GPO objects, but not installed them, likely I will need those later though.
Just want to path all the users to a central repository of office/excel/access/outlook templates in addition to their local templates. Concise help in steps or sites that have solved the issue are Greatly appreciated : )

Hi,
you can use the GPO ADMX templates to configure the "Workgroup templates path".
This actually configures a registry setting named: "sharedtemplates".
The registry value/type/data is:
HKEY_CURRENT_USER\Software\Policies\Microsoft\office\15.0\common\general
Name: sharedtemplates
Type: REG_EXPAND_SZ (Expandable String Value)
Data: <UNC path to folder>
From the GPO reference workbook/sheet, for Office:
http://social.technet.microsoft.com/wiki/contents/articles/4976.selected-content-relating-to-group-policy-administrative-templates-adm-and-admx.aspx
Filename: office15.admx
Scope: User
Path: Microsoft Office 2013\Shared paths
Policy Setting Name: Workgroup templates path
Supported on: At least Windows Server 2008 R2 or Windows 7
Category: Shared paths
Explain Text: Specifies the location of workgroup templates.
Registry Key: HKCU\software\policies\microsoft\office\15.0\common\general!sharedtemplates
Note: it is supported to populate this setting, with a UNC path, but not with a web path.
e.g.: \\server01\shared\templates <this is valid>
e.g.: http://server01/shared/templates <this is not valid>
This constraint (for web URIs) can be difficult to work around. If you are using SharePoint, and think WebDAV might work, it doesn't seem to work for us :(
Of course, if you have SharePoint, there are much better ways to handle document templates, but, our users are familiar with this File -> New -> from template type of method...
It can also be set manually by a user:
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Office 365 Pro Plus - Setup Failed Error - Network Deployment Share Method

Hello,
We recently deployed Office 365 Pro Plus utilizing the network share method. The issue we are experiencing is occuring after uninstalling Office 365. When we try to reinstall 365 on the same PC, the setup states "Setup Failed - A newer version
of Setup is required to install this product"
Here is our currentl XML script:
<Configuration>
<Add SourcePath=\\WDS.contoso.com\O365Deployment OfficeClientEdition="32" >
    <Product ID="O365ProPlusRetail">
      <Language ID="en-us" />
    </Product>
   </Add>
<Updates Enabled="TRUE" UpdatePath=\\WDS.contoso.com\O365Deployment />
<Display Level="FULL" AcceptEULA="TRUE" />


</Configuration>
Any help would be greatly appreciated!

Hi,
Would you like to give me the whole error message? Please see the "Troubleshoot specific errors in Office 365 ProPlus",we can find the resolution of
Internet Connection Required.
Since you want to install or deploy the Office 365 pro plus, please read the following articles and check they are helpful.
http://technet.microsoft.com/en-us/library/gg715562(v=office.15).aspx
http://blogs.technet.com/b/office_resource_kit/archive/2013/08/08/how-to-deploy-office-365-proplus-from-an-on-premises-web-portal.aspx
http://www.microsoftvirtualacademy.com/training-courses/office-365-deployment-for-it-pros
http://community.office365.com/en-us/w/upgrade/installing-office-365-proplus-with-the-office-deployment-tool.aspx
Regards,
George Zhao
TechNet Community Support

System center configuration manager book

Any good books on system center configuration manager.
How about this book from amazon.
http://www.amazon.com/System-Center-Configuration-Manager-Unleashed/dp/0672337150/ref=sr_1_3?s=books&ie=UTF8&qid=1410477862&sr=1-3&keywords=system+center+configuration+manager+2012+r2
any help or suggestions are appreciated.
Thanks

Hi,
Please refer to the link below:
http://social.technet.microsoft.com/Search/en-US/Technet?query=SCCM%20BOOK&beta=0&ac=4
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Deploying Office 365 Pro Plus using System Center Configuration Manager 2012 SP1

Similar Messages

Maybe you are looking for