Deploying Printer Server via GPO (Windows Server 2008 R2)

Hi guys,
I having encountered problem while deploying printer server via GPO. My operating system is Windows Server 2008 R2. See the details below:
"one or multiple errors have occurred during the execution of a deply or remove printer connection problem"
Anybody know's how to fixs this problem ASAP.
Any suggestion or clarification would be great!
Please advice me, thanks
Regards,
Bishelp

Hi Bishelp,
Firstly, please check the security tab of that printer, make sure your user account has access permission for it.
To perform these procedures of deploy printer connections, you must be a member of the local Administrators group and have write access to Group Policy objects (GPOs) in the AD DS domain or the organizational unit (OU) to which you want to deploy printer
connections. For more information please refer to following MS articles:
Deploy Printer Connections
http://technet.microsoft.com/en-us/library/cc731292.aspx
In addition, it would be helpful if you could help to collect the following information:
What is the detailed information about this error?
What are the steps of deploying printer server?
Regards,
Lany Zhang

Similar Messages

Folder Redirection via GPO (Windows Server 08 R2)

Can you post an image of the settings in the GPO you used? Maybe we'll see something wrong.

I have setup a Folder Redirection GPO that works quite well on my test group. The only issue I have seen is with users that have pre-existing data on their computer.If I create a new user in AD, log on as them and save some items to the desktop and documents folder THEN link the GPO, I am unable to see anything in their folders (at least anything that existed before the GPO was linked). If I go to their folder on the server as that specific user, I can see that the GPO worked.If I create a new user and link the GPO to them, THEN create a few documents, I can see what they have created. It appears that the only issue I am having right now is seeing the users data that they had BEFORE the GPO was linked on the server as the system admin. Grant Exclusive rights... is Disabled and Move the contents... is Enabled.I want to be able to...
This topic first appeared in the Spiceworks Community

Problems after print server migration to Windows Server 2008 R2

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Migrating From Window Server 2003 to Window Server 2012 for Web server deployment and Developmemt Machine is on Window Server 2008

Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.

Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen

How to enable high availability on SQL Server 2005 with Windows Server 2008 Enterprise R2

Dear Folks,
I would like to ask you about this thing. I'm working for IT department for bank in Myanmar. Our bank have up to 96 branches across all of Myanmar including H.O. We are using Microsoft SQL Server 2005 with Windows Server 2008 for our banking
information system. My main problem is having to backup and restore the database backup files every time the servers in branches goes down for whatever reasons. I want to deploy this feature of high availability and failover cluster using Windows Server 2008
and SQL Server 2005. Our branches have 2 Servers. One is for Primary and other is for Backup. What I want to do is that, I want to change Backup Server to Primary Server whenever the Primary Server goes down for whatever reasons. All the working data and databases
from Primary will immediately replicated into Backup Server along with all the IP information of Primary Server. Please give me step by step guide for this process.

Try below
http://blogs.msdn.com/b/cindygross/archive/2009/10/23/checklist-for-installing-sql-server-2005-as-a-clustered-instance.aspx
I will recommend you to upgrade SQL server to newer version for support as well as flexibility.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

How do I run a non-server program on Windows Server 2008

I currently run a synchronization software application on my desktop in order to backup and synchronize over 600GB of data. I would like to install this on our server, which runs Windows Server 2008, but the software does not provide for installation
on this operating system. I continue to receive a message stating that the software may not run properly on Windows Server OS, but it does not allow me to bypass this message. Is there any way to create a partition or trick the software into thinking
that it is running on a different operating system or do I have to abandon Server 2008 and install a basic home operating system in order to run this software? Any help would be tremendously appreciated.
Thanks!

Hi,
According to your description, my understanding is that you want to install an software which is not supported by Windows Server.
Try to install this software in other compatibility mode:
1. Right-click the installation program and select properties.
2. Select Compatibility tab, select the checkbox Run this program in compatibility mode for.
3. try to use different OS to install this program.
Besides, you may right-click the installation program and select Run as administrator.
Above are my personal suggestion and just for your reference. If the problem still exit, I suggest you to connect the software‘s support/form for better help.
If you want to backup date, I suggest you to use Windows Server Backup, you may reference the link below for detailed information:
http://technet.microsoft.com/en-us/library/cc770757.aspx
Best Regards,
Eve Wang

Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.

Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.
From windows server 2012 and windows server 2008, Opened port 20,21,22 in firewall bidirectionally. After Establishing connection by passing credentials 230 log in successful.
ftp commands executing getting as " 425 Use Port or PASV first" , "500 Illegal PORT command".
But I could able to do windows client machines like windows 7 and windows 8 with same environment
Note : Firewall ports are opened. have tested by making firewall down to avoid filters.
Pandiyan Muthuraman

Hi Pandiyan Muthuraman,
Did you mean even you disable or open the related port the FTP issue still exist? I found this errors most time occur when we use the ISA firewall and the FTP configured passive
mode, if you have ISA firewall please refer the following KB to fix this issue.
How to enable passive CERN FTP connections through ISA Server 2000, 2004, or 2006
http://support.microsoft.com/kb/300641
The have a specific form for the IIS question, if you have the further IIS related question you can ask in IIS forum.
IIS support forum
http://forums.iis.net/
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Mail via a Windows Server

Any one know how to set up an email address that is generated via a Windows server?

Hi,
This may be another option for you...
Is your Exchange hosted for you / Office365 or on premises?
If it’s on premises and you have storage space you could use a Transport Agent (and specifically a Routing Agent).
Using an agent you can take a copy of ALL email going in and out of a server (that's the whole email not just the headers or a log entry for it), then all you need to do is store it somewhere. I'd suggest just store it on file with an index (with date information
and the path to the email on disk etc) in a SQL database. Then when you need your "emails in a date range" simply run a query against your SQL database to get the list of emails. You can always run a batch job every now and then to remove emails older than
a certain date.
If your Exchange is hosted (or you are not allowed to install software on the server) this won't be an option.
Regards,
Scott
Scott Quinn | C# developer & messaging specialist (for hire). Contact me at http://au.linkedin.com/in/scottquinn

Is there a 32 Bit edition available for windows server 2012 and windows server 2008

Dear All,
Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
Regards,
Ahmed

Hi,
Quote：
All editions of Windows Server 2008 R2 are 64-bit only.
Reference link below(session Supported upgrade paths):
https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to monitor MySQL Server installed in Windows Server using Nagios

You can do this via NSClient as Gary posted. The NSClient is a communications system that allows nagios to send commands to a target system over the nsclient protocol and they are executed on the remote system. You will still have to build some kind of vbscript or plugin to run on the target system to do the actual query to check on mysql.There are other options to. If you enable snmp on your target computer you can use a few nagios plugins to query the snmp agent on the target computer to see if a service is running. To do this via snmp you will need this plugin "check_snmp_process.pl" fromthis site.Your check command will look something like this:check_win_process:= check_snmp_process.pl -H $HOSTADDRESS$ -C "$USER6$" -n "$ARG1$" -w $ARG2$ -c $ARG3$The service definition will be like this:check_win_process!sqlservr!0!0This will check...

I installed Nagios Core in my Ubuntu workstation 10.04 for me to learn something new in my craft. I use this now to monitor our Windows Server 2008 with MySQL server installed as well as our Datalink Switch (DGS-1210-24). I searched on google on how to monitor a MYSQL server installed in Windows server using Nagios Core but i could not seem to find any. Could anybody who's expert in Nagios give me steps on how to do so. Thanks. All i found in google were steps in monitoring mysql installed in linux and nothing in windows server.
This topic first appeared in the Spiceworks Community

Project Server 2013 on Windows Server 2012 R2

Can we install Project Server 2013 on Windows Server 2012 R2? Is it supported? I searched a bit but couldn't find any concrete information if it is supported or not.

From the article:
http://blogs.technet.com/b/office_sustained_engineering/archive/2014/03/03/announcing-availability-of-slipstreamed-office-2013-and-sharepoint-server-2013-with-sp1.aspx
Today, aligned with the SharePoint Conference, we’re announcing availability
of a slipstreamed SharePoint Server 2013 with SP1. SharePoint administrators
will be able to use this updated installer to deploy on Windows Server 2012 R2.
which I got linked from the following
http://blogs.technet.com/b/projectsupport/archive/2014/02/25/project-2013-and-project-server-2013-service-pack-1.aspx

Set up Search Service App For SharePoint server 2013 on Windows server 2012 R2 not working

Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM was set up to access
the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate to search service app
admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is in
a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean
isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message:
Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2    at
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem with Search
Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue.    This seems also to be a SP set up issue.
Thanks a lot.

Using new Search Service App wizard to create SSA is always a success. I could delete existing SSA and recreate it and no problem. It says successful but when I open Search Admin page from CA, it gives me errors as mentioned.
Now I used the following PS script for creating SSA from Max Mercher, but it stays at the last setps in following script:
Add-PsSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$IndexLocation = "C:\Search" #Location must be empty, will be deleted during the process!
$SearchAppPoolName = "SSAPool"
$SearchAppPoolAccountName = "mydomain\admin"
$SearchServiceName = "SSA"
$SearchServiceProxyName = "SSA Proxy"
$DatabaseServer = "W12R2DC1"
$DatabaseName = "SSA"
$spAppPool = Get-SPServiceApplicationPool -Identity $SearchAppPoolName -ErrorAction SilentlyContinue
if (!$spAppPool)
$spAppPool = New-SPServiceApplicationPool -Name $SearchAppPoolName -Account $SearchAppPoolAccountName -Verbose
$ServiceApplication = Get-SPEnterpriseSearchServiceApplication -Identity $SearchServiceName -ErrorAction SilentlyContinue
if (!$ServiceApplication)
# process stays at the following step forever, already one hour now.
$ServiceApplication = New-SPEnterpriseSearchServiceApplication -Name $SearchServiceName -ApplicationPool $spAppPool.Name -DatabaseServer $DatabaseServer -DatabaseName $DatabaseName
Account mydomain\admin is an farm managed account, domain admin account, in WG_ADMIN role, It is in all SQL server roles and is DBO. I see search DBs are already on SQL server. From Event viewer, I got following errors in sequence:
(1) Crawler:Content Plugin under source Crawler:Content Plugin
Content Plugin can not be initialized - list of CSS addresses is not set.
(2) Warning for SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(3) Error for SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application 'cbc5a055-996b-44a7-9cbc-404322f9cfdf'
(4) Error for SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
(5) Error Shared Services for SharePoint Server Search
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob
Above errors keep being generated. Last step for SSA creation stay there forever. Any clue what is really going on? Thanks.

Connect SQL Server 2012 from Windows Server 2003 with native client 9.0

Hi,
I currently have a setup where ETL tool Ab Intio, running on a Linux server, connects to the SQL Server 2005 through a passthrough Wintel server with Windows Server 2003 OS using SQL server native client 9.0
Now I have the requirement to upgrade the SQL server from 2005 to 2012.
My question is, will it be possible to connect to SQL server 2012 through Windows Server 2003 with native client 9.0?
As per the specs, I need native client 11.0+ to fully support SQL Server 2012, but then, as per specs, native client 11.0 doesnot run on Windows server 2003. OS upgradation is currently not on the cards.
So will it be possible to the run the basic queries we use currently, if we can connect SQL server 2012 through Windows Server 2003 with native client 9.0/10.0, without updgrading the OS of the Wintel server?
Thanking you in advance!

Hi Soumya,
Yes, you can use the SQL Server Native Client shipped with SQL Server 2005 to connect to a SQL Server 2012 instance, and there is no need to upgrade the operating system.
Regards,
Mike Yin
TechNet Community Support

Migration of Windows Small Business Server 2003 to Windows Server 2012 Essentials

Hi,
I am trying to migrate Windows Small Business Server 2003 to Windows Server 2012 Essentials by following the steps given in the link below:
http://technet.microsoft.com/en-us/library/jj200112.aspx
I have looked at other threads on the forum but none of them have been too helpful.
The issue: When
I run the Migration Preparation Tool on the Source Server, it runs successfully and does not report any errors. However, when I try installing Windows Server 2012 Essentials on the Destination Server, it displays an error that says 'Source
Server not prepared for migration: After you run the Migration Preparation Tool successfully on your source Server, click retry'.
The Source Server has 2 network adapters-one for the local network and the other for connection to the internet and the router is set as the default gateway this adapter.
Since it is mentioned in the documentation - 'configure your Source Server to use one network adapter', I'm wondering if this is the issue and I need to make changes in this configuration?
On running the Microsoft IT Environment Health Scanner tool it
reported an error - 'DNS Server listening on multiple addresses' and a warning ‘Domain Controller listening on multiple addresses’. Both point to the same solution KB 272294 (http://support.microsoft.com/kb/272294).
But it did not remove the errors.
Other steps performed:
As per the steps, I performed a backup, installed recent service packs and synchronized the source server time with external source.
On running the Best Practices Analyser. It shows 3 warnings.
- The threshold for the Allocated Memory alert is set to the default value. However the server has more than 2 GB of RAM installed.
- Microsoft Outlook Client not installed" Text="Microsoft Outlook Client is not installed in the ClientApps folder. You must run Windows SBS integrated setup.
- The MSFW instance should use the latest available service pack for Microsoft SQL Server 2000. The MSFW instance should use the latest available service pack for Microsoft SQL Server 2000.
I also ran the Ran netdiag.exe, dcdiag.exe commands
and no failures were reported.
The Event Viewer does not show any errors.
Not sure to what extent these warnings would affect the migration.
Any help would be appreciated. Thanks!

The SBS2003 needs to use one NIC only so you'll need to change that before starting. If it is the premium version and has ISA server installed, that will need to be removed first. See:
http://blogs.technet.com/b/sbs/archive/2011/07/01/sbs-2011-standard-migrations-keys-to-success.aspx
-- Al

Not able to install Exchange Server 2013 on Windows Server 2012

I got an error while installing exchange server 2013 on windows server 2012 : "The registry key "SOFTWARE\Microsoft\Exchange Server\v15\Pickup" does not exist under "HKEY_LOCAL_MACHINE " any related solutions highly appreciated
thanks :

Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support

Deploying Printer Server via GPO (Windows Server 2008 R2)

Similar Messages

Maybe you are looking for