Deploying XP with IDE and S-ATA

Hello,
anyone knows, what to do to deploy XP (Image) on worstations with serial ATA
/ IDE HDs?
Regards Udo

On Mon, 09 Jul 2007 13:51:15 GMT, Udo Czygan wrote:
> OK it works using Imaging machine 7.x
also it sometimes work if you use the latest patches and set the sataa hd
to combinded mode
If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
Live BootCd and USB Disk from Mike Charles
http://forge.novell.com/modules/xfmod/project/?imagingx
eZie http://forge.novell.com/modules/xfmod/project/?ezie
Marcus Breiden
If you are asked to email me information please remove the - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.didas.de

Similar Messages

Deploy Lenovo with SCCM and enable Bitlocker during deploying?

Hi!
Do anyone got information how to activate TPM and enable bitlocker during deploy of new Lenovo with SCCM ?
Something like this but for Leonovo
http://www.nullsession.com/2010/12/02/enable-tpm-in-task-sequence-with-sccm-and-cctk/
Thanks, Magnus
Solved!
Go to Solution.

jamessnarey wrote:
has anyone been successful with the WMI script on the M92p models, I recently attempted to activate the TPM using the same script that we use for our M91p and it fails. When I check the logs, it states that access is denied, when I run it manually I get the same error (access denied). Our lenovo rep says that you cannot use the WMI to enable the TPM and that the Enable Bitlocker step should enable the TPM. However we automate our OS deployments so manually enabling bitlocker is not an option, any assistance or feedback is appreciated.
I was having the same issue and I discovered another way to accomplish this task. Download this utility:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_bios/9sjw67usa.exe
Run the EXE to extract the files to the location of your choice, then copy them to your script location. From your script, run the following command:
srwin.exe /tpm active
Then do a couple reboots (this may not be necessary, but I didn't have time to test it.)
There are a couple of caveats. First, the working directory must be the directory the utility is stored in (presumably so it can find the two .sys files). I.e. you can't do
c:\utilities\srwin.exe /tpm active
you have to do
cd /D c:\utilities
srwin.exe /tpm active
Also, I was attempting to run this in a WinPE session (doing OS deployment using SCCM 2012) and I was getting an 0x80070134 error in my logs. I had been using an x64 boot image, and switching to an x86 boot image resolved that issue.
Hope this helps someone.

How to convert WAR application to be able to deploy it with JSPM and SDM?

We have to be able to deploy an application packaged in WAR file usign the JSPM and SDM GUI tools.
Using the Deploy tool there are no problems to build EAR file from the WAR and deploy it successfully to tha Application Server.
How should we convert our WAR application, or the EAR file created with the DeployTool in order to be able to use these 2 tools?
Using that EAR file with the JSPM and SDM GUI tools doesn't work:
JSPM
The ear file is copied in the inbox directory, but there is the following message:
No applicable support package stack(s) found for deployment in inbox directory
server\sapmnt\trans\EPS\in
SDM GUI:
When providing the EAR file created with the DeployTool, the SDM GUI fails to add it:
com.sap.sdm.util.sduread.IllFormattedSduFileException: The information about the development component found in the manifest is either missing or incomplete!
Manifest attributes are missing or have badly formatted value:
attribute keylocation is missing
attribute keyname is missing
attribute keyvendor is missing
attribute keycounter is missing
After adding these attributes, we couldn't manage to provide valid manifest header.
How can we modify/create valid manifest in order to be able to use the SDM GUI tool?
Please, give us directions how to convert our WAR package in order to use these tools?

Hi Sam
Check out the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/1b/92e4e701b242c2833a7adde6ecad09/frameset.htm
If you have an already built war file then most probably the easiest way to assemble it and deploy it will be to use the deploy tool (http://help.sap.com/saphelp_nw04/helpdata/en/35/e3ee3da7138e5be10000000a114084/frameset.htm) Usually we use the NetWeaver Developer Studio to build and deploy J2EE Applications (http://help.sap.com/saphelp_nw04/helpdata/en/fe/a3996fa314f94f8a0c3475b08636d0/frameset.htm).
OR
As i understand you the source files arent available so rebuilding is out of question.
0. Add web-j2ee-engine.xml in the same path as web.xml
<web-j2ee-engine>
<login-module-configuration/>
</web-j2ee-engine>
1. Create a Dummy EAR file.
2. Add the WAR file to the base directory (path should be blank if you view the EAR in WinZip).
3. Open the application.xml and add the entry for the WAR file
<application id="Application_ID">
<display-name>EAR_Name</display-name>
<module id="WebModule_1127381405488">
<web>
<web-uri><WAR NAME>.war</web-uri>
<context-root>sampleContextRoot</context-root>
</web>
</module>
</application>
Note: The number in module id has some significance, for the time being you have any random number.
Deploy the EAR.
Reward points if usefull

Deployment Isssue with Jboss and Blazeds

Hi,
I was trying to deploy Blazeds over Jboss 4.0.5.GA , for that i copied blazeds.war, ds-console.war and samples.war to Jboss deploy folder and restarted my jboss server.
when i'm trying to access samples application by using url http://localhost:8180/samples it is throwing
The requested resource (/ds-console/) is not available. exception
at Jboss console i'm geeting below error with all the three wars i deployed earlier
status: Deployment FAILED reason: flex/messaging/MessageBrokerServlet (Unsupported major.minor version 49.0)
state: FAILED
watch: file:/C:/SabaWeb/JBoss_Tomcat/server/default/deploy/blazeds.war
altDD: null
lastDeployed: 1256250757909
lastModified: 1256250757878
I think that is because of i'm not using jdk 1.5 or jboss 5 insted i'm using jdk 1.4 because of some dependency for my existing application
Please let me know which version of blazeds should i use for the above configuration (jboss 4.05 with jdk 1.4) or blazeds is not supported for jdk 1.4 at all
the version i tried was blazeds-turnkey-3.2.0.3978
Thanks,
Anuj

Remove all spaces from the directory path of where jboss is installed.
E.g. change
"c:\my docs\my boss dir" to
"c:\mydocs\myjbossdir".Strange I know. It appears to be an Eclipse issue rather than a jboss issue.
Cheers
Steve
P.S. You might have to change the server timeout to > 50secs (double click on server entry from within Eclipse (Ganymede)).
Edited by: Steve-M on 16-Aug-2009 20:05

[SOLVED] mkinitcpio (problem with ide and encrypt hooks)

I've installed kernel26-beyond 2.6.19beyond2 and after that mkinitcpio couldn't generate img file. I tried with 2 configs:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="reiser4 ext2 reiserfs"
# BINARIES
# This setting includes, into the CPIO image, and additional
# binaries a given user may wish. This is run first, so may
# be used to override the actual binaries used in a given hook.
# (Existing files are NOT overwritten is already added)
# BINARIES are dependancy parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in anyway. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options,
# like so:
# FILES="/etc/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'modload' may be used in place of 'udev', but is not recommended
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
# This setup specifies all modules in the MODULES setting above.
# No raid, lvm, or encrypted root is needed.
# HOOKS="base"
# This setup will autodetect all modules for your system and should
# work as a sane default
# HOOKS="base udev autodetect ide scsi sata filesystems"
# This setup will generate a 'full' image which supports most systems.
# No autodetection is done.
# HOOKS="base udev ide scsi sata usb filesystems"
# This setup assembles an ide raid array with an encrypted root FS.
# Note: See 'mkinitcpio -H raid' for more information on raid devices.
# HOOKS="base udev ide raid encrypt filesystems"
# This setup loads an LVM volume group on a usb device.
# HOOKS="base udev usb filesystems lvm"
HOOKS="base udev autodetect ide scsi sata encrypt filesystems"
and
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="reiser4 ext2 reiserfs"
# BINARIES
# This setting includes, into the CPIO image, and additional
# binaries a given user may wish. This is run first, so may
# be used to override the actual binaries used in a given hook.
# (Existing files are NOT overwritten is already added)
# BINARIES are dependancy parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in anyway. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options,
# like so:
# FILES="/etc/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'modload' may be used in place of 'udev', but is not recommended
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
# This setup specifies all modules in the MODULES setting above.
# No raid, lvm, or encrypted root is needed.
# HOOKS="base"
# This setup will autodetect all modules for your system and should
# work as a sane default
# HOOKS="base udev autodetect ide scsi sata filesystems"
# This setup will generate a 'full' image which supports most systems.
# No autodetection is done.
# HOOKS="base udev ide scsi sata usb filesystems"
# This setup assembles an ide raid array with an encrypted root FS.
# Note: See 'mkinitcpio -H raid' for more information on raid devices.
# HOOKS="base udev ide raid encrypt filesystems"
# This setup loads an LVM volume group on a usb device.
# HOOKS="base udev usb filesystems lvm"
HOOKS="base udev autodetect scsi sata encrypt filesystems"
With the first config mkinitcpio froze when was generating ide hook and with the second froze when generating encrypt hook.
Any idea what might have gone wrong? What should I do?
Best regards,
jasiekd.
Last edited by jasiekd (2007-02-20 14:00:49)

I don't have any experience with the beyond-kernel, but on two of my machines which already use encrypted root with LUKS I have added the following modules into /etc/mkinitcpio.conf
(I use AES for swap & Serpent for the rest, sha256 as essiv-hash)
MODULES="dm-crypt aes-i586 serpent sha256"
Did you switch the Kernel on an already installed/running System or did you make a fresh installation with the beyond-kernel? In case your System is already installed, you could try the mkinitcpio procedure with a life-cd (may be worth a try).
There's also an excellent article in the wiki:
http://wiki.archlinux.org/index.php/Mkinitcpio
In the troubleshooting-section of the article there's also a solution to a problem concerning the beyond-kernel and ide/sata/scsi, which could be just what you are looking for.
Hope it'll be helpfull!

BEST PRACTICES: How to deploy apps with public and private content & data?

Can anyone recommend a guide, blog post, etc. on best practices for:
- designing & deploying apps that have publicly-accessible (http + https) content, and
- content and data for which users must be authenticated and authorized?
NOTE: In our environment users are authenticated via OID. We're using Apex 4.

Hi,
Have a look at this Sample App for getting Auth Token from Instagram in windows phone app.
Also read the api documentation for more details from
here.
Pradeep AJ

Adobe ideas and Adonit Jot Touch 4.0

Hello,
Could we please get an update about IF and if so WHEN the Adonit Jot Touch 4.0 will be supported in Adobe Ideas?
Thank you!
Regards,

I too am wanting the Jot 4 stylus support. I have bought both it and the POGO and have evaluated them both on my iPad and iPad-mini.
In general I prefer the Jot 4 a lot more as it has a much finer ponit and you can see right where you are touching the surface. The Pogo tip is so big you can never see where you are touching. That is all feedback for the Pogo team though. I only meantion it becasue if you are going to support a device I think you would want to support the more functional of the two. Hopefully you can support both in the long run. Using Ideas is a great starting point for a lot of my work that I end up doing in AI and PS. The folks at Jot 4 said they have provided you with the SDK for their device.
Another item on the Pogo is it really isn't functioning on the iPad mini. They had to do some kind of work around, but you have to press really hard to get it to do a line. It works ok on the iPad.
So on to Ideas itself.
Palm rejection:
One bug I notice is when you have palm rejection on you can still mark your work by point touching it. say with your finger tip or knuckle. Your pinkie knuckle in particular tends to touch your work a lot and it will leave a point spot. I thought with palm rejection only your stylus would mark the work.
Multi Touch:
Not being able to multi touch pan and zoom on the fly while you are using your stylus is not good at all. Having to contantly select the palm button everytime to pan or zoom your work is so prohibitive that using the stylus in a connected mode is almost not worth it. That and given the palm rejection doesn't really work either as pointed out above then the only advantage you are left with when using the stylus is line width pressure control, which is almost not worth it. I find I end up turning it off just so I can work more productively.
On the fly functions:
The on the fly functions would be a lot more functional if they were user defined. I think more people would prefer an undo than say an opcacity control.
In the end I think you have created a great prodcut with Ideas and it opens up a lot of potential with hand drawn vector art, which is huge.
In the end I would hope you are able to get it on Android.
More to the point I hope you get it working with the Jot 4 stylus. It is just so much more of an elegant and functional tool that gets the highest reviews and ratings of any device.

Develope complex WebService with JDeveloper and deploy to tomcat

Hello,
I am thinking of developing a complex WebService with JDeveloper and deploy it to tomcat.
The WebService should retrieve a few "normal" datatypes and a pdf and a few images. I try to store the pdf and the image in an Oracle DB as BLOB.
My idea ist to create a Package which selects the values, pdf and the image and retrieve them as the output paramter.
Then I want to create a WebService with the JDeveloper which calls this Package. This WebService should be published on a Tomcat.
My first question is if that is possible?
I think there are few problems.
I searched the forum about deploying a JDeveloper WebService to Tomcat, but I can not find a whole solution which is going to work. I read something about JAX-RPC, but I am new to this topic. So it would be very nice, if anyone could tell me where I can find the solution or post a quick guide to solve that.
Another question is how I have to decode the images and the pdf to provide those files in a WebService?
I would be very glad if anyone can help me or tell me where I can find information about that, becaus I am new to this topic!
Thank you,
Tim

Hi,
does anybody have an idea about that?
Thanks,
Tim

HT2513 my iCal calendar that I created with the color green keeps changing to purple. no matter how many times I change it to green, it turns it back to purple. Of course this only happens with iCloud and not "from my Mac". Any ideas?

my iCal calendar that I created with the color green keeps changing to purple. no matter how many times I change it to green, it turns it back to purple. Of course this only happens with iCloud and not "from my Mac". Any ideas on how to correct this? This seems like a trivial error, but it's super annoying.

I called Apple and they said that they know about this problem. It's a problem with iCloud which their Engineers know about. (there was a new iCloud release, hence...) No ETA for a fix yet. I asked that this be escalated so Engineering doesn't put it at the bottom of their fix list. I talked to a Senior Advisor and mentioned to them to have QA check their regression tests as this has happened before to me (the problem just didn't take this long to resolve). I like to use green too for important stuff, so I've resorted to creating a new calendar using the normal calendar green for events going forward. They could have picked another color besides green to have this problem with and I wouldn't have been so upset. ;-)

When I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both fin

when I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both find nothing.... any advice would be greatly welcomed.. thanks
== This happened ==
Every time Firefox opened
== this morning 22/07/10

Lyall,
I have seen this before, a long time ago (several years), and I cannot
remember how/if we resolved it.
If this is an impotant issue to you, I suggest that you open a case with
BEA support.
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of
the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
Lyall Pearce wrote:
The title says it all really.
I see other posts getting replies.
This is a rather important issue, I have seen another post with a similar problem.
While not being a show-stopper it certainly raises concerns.
The application works ok until the application exits (in both development and
executable form)
Apparently this did not happen with Tux 7.1
It does with 8, I do not have 7.1 so I have no workaround.
..Lyall

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

Flex and Zend amf deployment resolved with proper solution

Hi All,
Although, I personally do not like using Zend for these issues itself. However, I faced this issue first time with flex 4.0 version when everyone used to run into
channel disconnected error. you can find the link for that post here:
http://forums.adobe.com/message/3366991.
Now, with flash builder 4.6, things have changed slightly and so the deployment process. So, here are the right set of steps to be followed :
1. after developing your flash project, export the release build(I assume if you are a flex user, you should know these steps already)
2. Now, check your release folder, you must have got some files with amfconfig.ini and gateway.php and just one folder named history.
3. copy all these files into a new folder say "My Release Build".
4. Now, step 1 is get Zend framework in place, to achieve that:
there are different ways. some will say : "make sure zend must already installed on your production server." that is an alternative but most likely, the easier way to do this is : search your www(root folder on localhost),you will find a folder with name ZendFramework. Copy this folder to "My Release Build"
5. Now, the services that you have used in your flex project, go to debug folder of your project which should be in your www(root folder on localhost) with name "yourprojectname-debug". copy services folder from this debug folder to "My Release Build"
6. Now, open your amfconfig.ini from "My Release Build" and edit and make it look like following:
[zend]
webroot = http://www.yourwebsite.com
;you can edit above webroot to match the root folder of your website or use . to make it point to root.
zend_path = ./ZendFramework/library
[zendamf]
amf.production = true
amf.directories[]= services
thats it. your amf config is fine.
7. edit gateway.php:
Now, remove everything from gateway.php and copy this as it is there:
<?php
ini_set("display_errors", 1);
$dir = '.';
$webroot = $_SERVER['DOCUMENT_ROOT'];
$configfile = "amf_config.ini";
//default zend install directory
$zenddir = $webroot. '/ZendFramework/library';
//Load ini file and locate zend directory
if(file_exists($configfile)) {
    $arr=parse_ini_file($configfile,true);
    if(isset($arr['zend']['webroot'])){
        $webroot = $arr['zend']['webroot'];
        $zenddir = $webroot. '/ZendFramework/library';
    if(isset($arr['zend']['zend_path'])){
        $zenddir = $arr['zend']['zend_path'];
// Setup include path
    //add zend directory to include path
set_include_path(get_include_path().PATH_SEPARATOR.$zenddir);
// Initialize Zend Framework loader
require_once 'Zend/Loader/Autoloader.php';
Zend_Loader_Autoloader::getInstance();
// Load configuration
$default_config = new Zend_Config(array("production" => false), true);
$default_config->merge(new Zend_Config_Ini($configfile, 'zendamf'));
$default_config->setReadOnly();
$amf = $default_config->amf;
// Store configuration in the registry
Zend_Registry::set("amf-config", $amf);
// Initialize AMF Server
$server = new Zend_Amf_Server();
$server->setProduction($amf->production);
if(isset($amf->directories)) {
    $dirs = $amf->directories->toArray();
    foreach($dirs as $dir) {
        // get the first character of the path.
        // If it does not start with slash then it implies that the path is relative to webroot. Else it will be treated as absolute path
        $length = strlen($dir);
        $firstChar = $dir;
        if($length >= 1)
            $firstChar = $dir[0];
        if($firstChar != "/"){
            // if the directory is ./ path then we add the webroot only.
            if($dir == "./"){
                $server->addDirectory($webroot);
            }else{
                $tempPath = $webroot . "/" . $dir;
                $server->addDirectory($tempPath);
        }else{
               $server->addDirectory($dir);
// Initialize introspector for non-production
if(!$amf->production) {
    $server->setClass('Zend_Amf_Adobe_Introspector', '', array("config" => $default_config, "server" => $server));
    $server->setClass('Zend_Amf_Adobe_DbInspector', '', array("config" => $default_config, "server" => $server));
// Handle request
echo $server->handle();
Now, upload your "My Release Build folder to your production server webroot"
case 1: if you get "channel disconnected error, you have made some mistake and your path for zend or services folder is not right."
In above case, "ZendFramework folder and services folder with all of other release files". To find out what is wrong, open this url :
http://www.yourwebsite.com/gateway.php. if you see this lovely string there : "Zend Amf Endpoint". consider your are through with zend settings on server
otherwse you will see relative errors.
2. After fixing this step, try run your website, you will land into this error :
Class “yourcorrectclassname” does not exist: Plugin by name ‘Classname’ was not found in the registry; used paths:
: /home1/messoftc/public_html/oc/services/
#0 /home1/messoftc/public_html/ZendFramework/library/Zend/Amf/Server.php(553): Zend_Amf_Server->_dispatch(‘fxnname’, Array, ‘classname’)
#1 /home1/messoftc/public_html/ZendFramework/library/Zend/Amf/Server.php(629): Zend_Amf_Server->_handle(Object(Zend_Amf_Request_Http))
#2 /home1/messoftc/public_html/oc/gateway.php(69): Zend_Amf_Server->handle()
#3 {main}
Now, this is a zend framework bug, it does not automatically detect the php classes in your services folder,those who have run into this, must have googled hard to find the solution and this bug is also logged officially on zend server jira log.
so, what is the solution? simple and effective. open your gateway.php file from "My Release Build"
Add this little line :
$server->addDirectory(dirname(__FILE__) . '/services/');
after this line :
$server->setProduction($amf->production);
reupload this file to your production, you should see your Flex, Zend, php & Mysql in action.
Here is a sample link I have created :
http://www.eiws.co.in/testzend.html
you may also visit the endpoint file:
http://eiws.co.in/gateway.php
If anyone still faces this issue, can contact me at [email protected].
Credits: "To all developers who share their knowledge with everyone and google and thousands of blogs who provide a medium to share this knowledge"

Richard Bates of flexandair.com figured it out. In my php.ini file, I had the memory limit set at 8M. After, changing it to 32M, it worked. Thank you, Richard!
-Laxmidi

IOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer. Anyone have an idea what needs to be done?

iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer. Anyone have an idea what needs to be done? The only solution we have found is to reboot the iPad. We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes.

iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer. Anyone have an idea what needs to be done? The only solution we have found is to reboot the iPad. We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes.

Problem with Fax and ATA

Hi,
i do not have problem to send Fax to the PSTN, but when I try to receive a fax on the fax machine in port1 of the ATA, the machine never give fax signal.

Hi Leonardo,
Have a look at the following;
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP) (2.15.ms, Rev B0)
Configuring and Debugging Fax Services
http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administration_guide_chapter09186a00800c4d1e.html#1016012
Configuring and Troubleshooting the Cisco ATA 186 with Fax
http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a00800d698e.shtml
Configure Fax Detection Method on the Cisco ATA 186
Use a web browser and go to http:///dev (for example, http://172.16.104.117/dev) in order to configure the Cisco ATA 186 using the web interface.
You must configure these parameters in order to configure the Cisco ATA 186.
Audio Mode
bit 2 (18)=0 Enable detection of FAX CED (answer) tone and switch to FAX mode for the rest of the call if the tone is detected.
Hope this helps!
Rob

Cisco Prime Collaboration Deployment with BE7K and VMWare license

Hello, I am looking for some help trying to figure out if Cisco Prime Collaboration Deployment can be used to upgrade our existing 7.1.5 cluster. From what I have read there is a API problem with the VMWare license that comes with the BE7K. But after reviewing the BOM/quote from my VAR it lists the foundation license which based of the release notes is supported.
UCSS-U-VMW-FND-5-1
UCSS Cisco UC Virt. Foundation Five Year - 1 server
Has anybody out there had expericne with PCD and BE7K'?
This is from release notes of PCD
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_5_1/CUCM_BK_P139675A_00_pcd-rns-1051/CUCM_BK_P139675A_00_pcd-rns-1051_chapter_010.html
Search for “Business Edition 7000” and it will state it is not supported with PCD. It is because the licenses that the BE 6k and 7K are shipped with don’t enable certain VMware APIs that PCD needs.
“Virtualization Software License Compatibility
Cisco Prime Collaboration Deployment is not compatible with all license types of VMware vSphere ESXi, as some licenses do not enable required VMware APIs.
The following are compatible with Cisco Prime Collaboration Deployment:
Cisco UC Virtualization Foundation (appears as "Foundation Edition" in vSphere Client)
VMware vSphere Standard Edition, Enterprise Edition, or Enterprise Plus Edition
Evaluation mode license
The following are not compatible with Cisco Prime Collaboration Deployment:
Cisco UC Virtualization Hypervisor (appears as "Hypervisor Edition" in vSphere Client)-preloaded on Cisco Business Edition 6000 and Business Edition 7000
VMware vSphere Hypervisor Edition
Any help would be appreacted.
JP

Thanks Jamie for repsonding, we haven't made any purchase's yet but I wanted to ensure we are purchasing a solution that won't lead to a lot of frustration. We only have 1000 phones so we are pretty small and the BE7K seems to be a good fit and value.
Cheers,

Deploying XP with IDE and S-ATA

Similar Messages

Maybe you are looking for