Deployment and TLB from DP BOM POS

Hello Masters of the Universe ......
I have a question ....i am using DP BOM ... after i have the demand for dependent products i am using a macro to calculate safety stock and net requirement ....
After i have the net requ calculated it will be necessary to create a purchase req or stock transfer req .... it is possible to create directly from the DP BOM área using the deployment and TLB?
I was trying to test but the system not allow to create a Planning Book with Deployment and TLB flags whem you are on a DP BOM POS but it is possible if i am using a SNP relevant POS.
Some one can help me please ?
Thank You ALL

Hi Geovana Juliani ,
Can u check whether materials/components you have use are create in APO as location-product master data and already assigned to model 000?
Check the date also.
Thanks,
Nikhil

Similar Messages

Deployment and debugging from JBuilder

Hi,
i build a JATO application that deployed as a war file and run
perfectly on an external Tomcat.
But running this app on the integrated Tomcat of the JBuilder tool
results in the following error :
Application Error - javax.servlet.ServletException: Invalid reqest -
request handler "Login" not found
On that way, debugging the application is not possible.
Any idea what's wrong ?
I've heard there is a deployment tool document ? Where is it ?
thanks for your help

Hi--
None of our team has experience running JATO apps in JBuilder. The main
thing to check when running in an IDE is that the web.xml is properly
registered. Because you've received a JATO error, I assume it is in your
case. Therefore, it must be something else.
The error you sent means that the lookup for the LoginViewBean class failed.
This is probably a silly question, but are all of your classes compiled and
under the /WEB-INF/classes directory? Any other reason your application
classes might not be found?
Todd
Todd Fast
Senior Engineer
Sun Microsystems, Inc.
todd.fast@s...
----- Original Message -----
From: <donnetmonay@y...>
Sent: Tuesday, November 20, 2001 1:26 AM
Subject: [iPlanet-JATO] deployment and debugging from JBuilder
Hi,
i build a JATO application that deployed as a war file and run
perfectly on an external Tomcat.
But running this app on the integrated Tomcat of the JBuilder tool
results in the following error :
Application Error - javax.servlet.ServletException: Invalid reqest -
request handler "Login" not found
On that way, debugging the application is not possible.
Any idea what's wrong ?
I've heard there is a deployment tool document ? Where is it ?
thanks for your help
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Consignment without Deployment and TLB

Hello ,
We currently have DP and PPDS implemented in our system , we are planning to have consignment scenario implemented where the customer sends in the forecast to APO DP .
1) How would the process be if we do not want to implement SNP,Deployment , TLB . Can we still go ahead and implement it . How would the process be . The help document says that once the TLB shipment is sent to ECC an Consignment order is created , but in our case we do not want to implement SNP , Deployement , TLB can we still be able to do it .
Regards,
Nick

Thanks Senthil
We did try with the first option.. Fair share rule "A", But if we deploy based on the demand of the destinations and other destinations with lower demand would be left over. Our business works more on serviceability.
with the second option, As per my understanding Push by distribution is when demand < supply, so that we can push the supply. In my case the demand > supply.
Fair share rule "B" is working fine and Deployment is carried out at SKU level and when a TLB is run it can collate all the SKU for the specific destinations and form a truck.
I would need to perform the steps as per my earlier post. Could you suggest any customized developlment required this??
Regards
Nav

Deployment and TLB

Dear All
Requirement : We run deployment using fair share rule "B" followed by TLB with truck capacity defined.
Since it deploys the stock based on the target stock levels and distributes it proportionally, sometimes we face problem when the stocks get deployed to destinations but not able to form an STO since it doesn't satisfy the TLB rule. This impacts, stock not to shipped and constraint in storage at location
Can it work as below??
1. Deploys based on fair share rule "B".
2. Tries to form a Truck ( TLB)
3. If truck not formed , then re deploy the stock based on other logic (say priority)
4. Then form a truck (TLB).
At least in this case.. STO's are formed for some destinations and stocks can be shipped out..
Pls provide your expert comment ...
Regards
Nav

Thanks Senthil
We did try with the first option.. Fair share rule "A", But if we deploy based on the demand of the destinations and other destinations with lower demand would be left over. Our business works more on serviceability.
with the second option, As per my understanding Push by distribution is when demand < supply, so that we can push the supply. In my case the demand > supply.
Fair share rule "B" is working fine and Deployment is carried out at SKU level and when a TLB is run it can collate all the SKU for the specific destinations and form a truck.
I would need to perform the steps as per my earlier post. Could you suggest any customized developlment required this??
Regards
Nav

Difference between Installing an application and Deploying and application

What is the Difference between Installing an application and Deploying and application from the console?
When deploying and app from console - > Click on deployments -> Install -> choose app path, next, next,.. Finish.
Then it will be in prepared state. Once you activate changes, the app deployed will be in activate state. Some times even if you activate changes, it will be in prepared state. then you need to start the app which then comes to activate state.
From above, which part is called Installing an app? Which part is called deploying an app?
Or Are Install and Deploy both mean same?
Edited by: user734247 on Apr 26, 2012 3:16 PM

Installation is generally referred to making an application's physical file or directory known/accessible to WebLogic Server by configuring through the "New" option in the "Deployments" screen and targeting the servers. Installation of an application will put the status of the application in "prepared" state.
Start is the next action expected so that the application's state transforms into "ACTIVE" by initializing the application and loading the necessary classes and creating the necessary objects to run the application.
The above two steps together are referred to as "Deployment of an application"
Bottomline: In short, "Deploying an application" includes "Installation of the application" AND "Activation/Start of the application"
Arun

How to move the code and deploy the code from Dev environment to SIT.

Hi,
I have a requirement.
I want to move the components and deploy the code from dev Environment to SIT environment using Ant Script for AIA.
Before doing this is any pre-requisites required?
Can you please help on this,how to do?
Thanks in advance.

Further to add to Anish Statement follow the steps to easily migrate the code to different environment.
Steps:
First log on to the EM Console and export the Composite Flow as a SAR file to a location.
In Jdeveloper create a project using the same name of a SAR file like - ProcessSalesorderFlow
import the project using the option import the composite using a SAR File.
After import , then click on the composite and then generate the config plan.
In config plan add all the url changes using the search and replace Tags.
And in case if you have a JCA Adapters the same has to be taken care in SIT environment why because during deployment a lookup happens and deployment fails if it dont find the JNDI Name.
Take the SAR file adn config plan seperately from JDeveloper.
Now open em console again and then deploy it using the config file and SAR file.
Thanks,
Venugopal SSS RAJA

Extracting changes from Change Master and importing to another BOM

Dear All,
Our client uses ECM and manages two BOM's the Engineering BOM and Production BOM.
The Engineering BOM s are changed through change number. We need to import these changes to the production BOM, (only the changes) through another change number
This means,
We have the Engineering BOM (No plant, usage 2) and Production BOM (Plant BOM with usage 1)with the same structure (BOM header is Z)
Header : Z
Position 1 :A Qty 1
Postion 2 : B Qty 1
Both initially had components A and B, each with Qty 1.
Now with a change number, the Engineering BOM is changed, a new component C is added, the quantity of A is revised to 2.
Now the Engineering BOM is
Header : Z, Plant ( blank) and Usgae 2
Position 1 :A Qty 2
Postion 2 : B Qty 1
Position 3 : C Oty 1
Our requirement is to extract the changes from the Change master, ie, the extract should say BOM header Z is changed,
New position 3 : C Qty 1,
Modified Position 1, Qty 2.
This should have only the changed information and we want to input this to the Production BOM, through another change number to change the Production BOM.
We want this process to be automated, in the sense, user enters the Production BOM header, Plant and usgae 1 and the new change number, then the BOM will be updated with the changes in the engineering BOM.
My Questions are
1- How to get an extract from the Change master with only the changes file, to a txt or xml or any format?
2- Apart from manually updating the Prodcution BOM by seeing the changes from Environment ->Reporting ->BOM changes of the Change master of the Engineering BOM, is there any other way to update the Production BOM only with the changes?
3- Ideally we want to import the changes to the Production BOM rather than deleting the items and again copying from Engineering BOM. What is best practice used in this scenario?
Any suggestions would be helpful
Regards,
Aby Thomas

Dear Mario,
Got ur point.. This is of course possible.. Practicallyboth the BOM's are not exactly identical. Tere is one more BOM apart from the Production BOM.
And there is a need to transfer the changes ( changes alone ) between BOM's.
Further more, there are interface from SAP to other systems, where they alos requires the BOM changes.. So the requirement arises, how to transfer the changes between BOM and also to other systems from SAP.,
If we do not have any interface from legacy PDM, how to extract the changes from the change master?
What is the general practise followed?
Regards,
Aby Thomas

HT5487 So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "inte

So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.

A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert

How to deploy Forms, Reports and Menu from Client to Server machine

Dear Experts,
I have one requirement to deploy the Forms, Reports and Menu from client machine to server machine.
Deployment involves the following steps :
1. Firstly we have to search the selected file in a folder where the .fmx is present ( in Server machine) and take the back up of the the existing file in the server (Source and destination paths will be available).
Ex. If the existing FMB name is TEST.fmx then the backup file should be TEST_sysdate.fmx.
2. Secondly we have to transfer the file from the client folder (or from another folder of the same server) to the server folder where the back up exists.
Please help me to search/rename/copy/replace the _.fmx/.rdf/.rep/.mmx_ files from client to server.
We are using
9i Database.
10g Forms and reports.
SQL Developer tool.
OS is Windows (Client and Server).
Help me out to attach a file of front end screen which we are planning to develop. It will give a clear picture on this requirement.
Thanks :)
Edited by: 941175 on Jun 17, 2012 9:09 AM
Edited by: 941175 on Jun 17, 2012 9:12 AM
Edited by: 941175 on Jun 17, 2012 9:14 AM

941175
Welcome to the forum. Please take a while to go through the FAQ to be found to the top right of the page.
Your issue is more to do with batch files rather than Forms. The only relation with Forms, as I see it, is that you will be using HOST/CLIENT_HOST to start a batch file with the file name to be deployed as a parameter passed to it.
You need to rewrite either a CMD batch file or a Powershell script to achieve what have set out to do.
For CMD batch files look up http://www.robvanderwoude.com/battech.php , or any of the other excellent resources available on the internet.
Regards,

Separating Reporting and Analysis from Compact deployment

Hi,
We need to separate Reporting and Analysis from the compact deployment since need to have better control and already have many reports created. (I already separated Planning and that worked fine)
Reporting and Analysis has three applications:
•     Financial Reporting Web App (includes financial reporting Print Server)
•     Web Analysis web app
•     Framework web app
I plan to use configtool.sh which has following options:
•     Configure Database (will NOT select this, since DB is already configured)
•     Deploy to Application Server (will select this for sure)
•     Configure Reporting and Analysis Services (not sure if need to select this again since was done in the compact deployment) ??
•     Configure Framework Service ( also not sure if need to select this, since was done before in compact)??
•     Configure Framework Reporting RMI Ports (also not sure if need to select this, since was done before in compact )??
My questions:
1. Do I need to reselect to reconfigure the last three R&A options above (or it doesn't matter if I select as originally? Note we already have developed reports)
2. Can I specify to deploy the three Web applications to a new separate Managed server (e.g. Reporting0 and port 8200 i.e. deploy with Financial Reporting) or better deploy each to new separate managed server?
Plan to do this in couple of days. Appreciate the advice.
Thanks
Edited by: user8769031 on Feb 6, 2013 5:35 PM

John,
No, I don't believe it will remove the apps and I have to change the target for each of the three apps to remove them from EPMSever0, and ensure they are in new managed server(s).
That's what I had to do when I separated Planning. (That was your hint, thanks)
Hope my plan is fine. (Sure will be doing a cold backup)
Thanks
Edited by: user8769031 on Feb 7, 2013 11:02 AM

How to export deployed SOA process from 10.1.3.4 and to use in JDeveloper

I have a situation where I need to export deployed SOA process from 10.1.3.4 in order to make some changes since the source code is not available. If I export process from BPEL console in 10.1.3.4, I cannot use that in JDeveloper. Will anyone suggest me how to export the deployed process from 10.1.3.4 and then to import in JDeveloper 10.1.3.4. thanks!
Regards,
Suneel Jakka

As far as i remember, i think you have option to export the deployed project as .zip file.
When you deploy using jdev / ant script, the compiled code will be exported as .jar file into the server and in the server context path, the .jar file will be extracted.
When you export from the server, it will zip the extracted content from the context path.
So you need to create a empty project with that name and manually copy paste the project folders into your jdeveloper work space, then compile.
Hope this helps !!
*7) Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question.*
Thanks,
Vijay

Build and deploy iPhone application from terminal

Hi,
I'm new to the Mac world and was trying to build an application from the terminal without success although the documentation mentions its possible (but doesn't provide any documentation on the tools or any other details).
So, anyone can give me a simple example of how to build an application from the terminal and deploy it to the simulator and/or sign and deploy to an iphone?
Thanks

Hello lancea,
sorry for not specifying my Qs clearly.
But now I got clear idea about asant command.
Actualy my problem is How to package an ear for obove mentiioned files, which all are in package.
When I tried to build .ear for particular session bean and accessed from remote client
I am getting following exeption. It seems application is not able to refer classes in package.
C:\j2ee\orcaclient>java -classpath ".;c:/sun/appserver\lib\orcaClient.jar;C:\j2
ee\orcaclient\jp\or\med\orca\sdk\server\base\manager\orcaAppClient.jar;c:/sun/ap
pserver\lib\j2ee.jar;c:/sun/appserver\lib\appserv-rt.jar" -Dorg.omg.CORBA.ORBIni
tialHost=JAVADEV01 -Dorg.omg.CORBA.ORBInitialPort=3700 jp.or.med.orca.sdk.server
.base.manager.Client
Exception in thread "main" java.lang.NoClassDefFoundError: jp/or/med/orca/dbs/DB
SIllegalStatusException
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
at java.lang.Class.getConstructor0(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at com.sun.corba.ee.impl.util.Utility.loadStub(Utility.java:912)
at com.sun.corba.ee.impl.javax.rmi.PortableRemoteObject.narrow(PortableR
emoteObject.java:285)
at javax.rmi.PortableRemoteObject.narrow(Unknown Source)
at jp.or.med.orca.sdk.server.base.manager._DBSAccessorSessionHome_Stub.c
reate(Unknown Source)
at jp.or.med.orca.sdk.server.base.manager.Client.main(Unknown Source)
I hope you got my problem.
Thanks in advance.
Regards,
Prashant-

Error Deploying Sample Portal from Development Guide

I am going through creating a New Portal from WebLogic Portal 7 Development
Guide and I am running into the following problem.
After completing Step 2: Create the New Portal, when I try to Hot Deploy the
application, I get the following error.
Hot deploy failed with the following message:
Unable to add module: NewPortalWebApp to application descriptor for:
portalApp.
The log has the following information..
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
portlets\Portlet1.portlet to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\tools.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\webflow-extensions.wfx to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\user_account.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\portal.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\security.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\NewPortal.portal to sync list.
Attempting sync...
Sync complete.
Searching for portalApp application descriptor...
Found it.
Error - please check log for details.

That's great, Mike, you're welcome. I'm glad it's working for you. Thanks for letting me know.
-Scott
Mike Friesen wrote:
I'm sorry you were right.. I tried it and everything works... thanks..
Mike
"Scott Ellis" <[email protected]> wrote in message
news:[email protected]...
Hi Mike,
I hear what you are saying and I believe you. But the error you describedis the known issue related to Internet access
(down to the exact line numbers in the stack trace). Is it possible yourconnection was down last time you attempted
hot-deploy?
If you are sure your Internet connection is up, I would recommend tryinghot-deploy again. If it still does not work,
something very strange is going on. At that point I would recommendtrying the workaround anyway or escalating the issue
to BEA Support.
Now my curiosity is piqued so I hope you'll let me know either way.
Best Regards,
Scott Ellis
BEA Systems
Mike Friesen wrote:
yes..
"Scott Ellis" <[email protected]> wrote in message
news:[email protected]...
Can you please try something for me? Paste the following URL into abrowser:
http://java.sun.com/dtd/application_1_3.dtd
Does it come up?
Thanks,
Scott
Mike Friesen wrote:
Actually, my computer does have internet access, so I don't think that
is
the problem.
Mike
"Scott Ellis" <[email protected]> wrote in message
news:[email protected]...
Hi Mike,
I would bet that you are working on a machine that doesn't have
Internet
access, correct?
The problem is that the EBCC is trying and failing to access the J2EEapplication descriptor
dtd from Sun's website.
If you can't get Internet access, here is the workaround:
- save the attached file to your harddrive (just save it to c:\)
- edit the application.xml file for your project as follows:
- first copy the entire DOCTYPE declaration and save it somewhere
in
a
separate text file (in case want to revert back to it later)
- edit the DOCTYPE declaration so that it looks like this:
<!DOCTYPE application PUBLIC '-//Sun Microsystems, Inc.//DTD J2EEApplication 1.3//EN' 'file:///application_1_3.dtd'>
( notice that the java.sun.com web address is replaced with the URI
to
the file on your harddrive)
- save your changes and hotdeploy will work with or without Internetaccess
Thanks,
Scott Ellis
BEA Systems
Mike Friesen wrote:
I am going through creating a New Portal from WebLogic Portal 7
Development
Guide and I am running into the following problem.
After completing Step 2: Create the New Portal, when I try to Hot
Deploy
the
application, I get the following error.
Hot deploy failed with the following message:
Unable to add module: NewPortalWebApp to application descriptor for:
portalApp.
The log has the following information..
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
portlets\Portlet1.portlet to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\tools.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\webflow-extensions.wfx to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\user_account.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\portal.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\security.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\NewPortal.portal to sync list.
Attempting sync...
Sync complete.
Searching for portalApp application descriptor...
Found it.
Error - please check log for details.




<!ELEMENT application (icon?, display-name, description?, module+,
security-role*)>

<!ELEMENT alt-dd (#PCDATA)>

<!ELEMENT connector (#PCDATA)>

<!ELEMENT context-root (#PCDATA)>

<!ELEMENT description (#PCDATA)>

<!ELEMENT display-name (#PCDATA)>

<!ELEMENT ejb (#PCDATA)>

<!ELEMENT icon (small-icon?, large-icon?)>

<!ELEMENT java (#PCDATA)>

<!ELEMENT large-icon (#PCDATA)>

<!ELEMENT module ((connector | ejb | java | web), alt-dd?)>

<!ELEMENT role-name (#PCDATA)>

<!ELEMENT security-role (description?, role-name)>

<!ELEMENT small-icon (#PCDATA)>

<!ELEMENT web (web-uri, context-root)>

<!ELEMENT web-uri (#PCDATA)>

<!ATTLIST alt-dd id ID #IMPLIED>
<!ATTLIST application id ID #IMPLIED>
<!ATTLIST connector id ID #IMPLIED>
<!ATTLIST context-root id ID #IMPLIED>
<!ATTLIST description id ID #IMPLIED>
<!ATTLIST display-name id ID #IMPLIED>
<!ATTLIST ejb id ID #IMPLIED>
<!ATTLIST icon id ID #IMPLIED>
<!ATTLIST java id ID #IMPLIED>
<!ATTLIST large-icon id ID #IMPLIED>
<!ATTLIST module id ID #IMPLIED>
<!ATTLIST role-name id ID #IMPLIED>
<!ATTLIST security-role id ID #IMPLIED>
<!ATTLIST small-icon id ID #IMPLIED>
<!ATTLIST web id ID #IMPLIED>
<!ATTLIST web-uri id ID #IMPLIED>

Cannot deploy BPEL Process from Jdeveloper

Hello,
I am using JDeveloper 10.1.3.2 on my laptop.
I have Oracle SOA Suite 10.1.3 deployed and running on my laptop as well (port 8888) (running MS Vista).
Some background:
I can access my app server at http://127.0.0.1:8888, http://localhost:8888, http://toral-pc:8888 using browser with no problems at all.
However, when I try to deploy a business process (using ant on build.xml) from JDeveloper I get the following error:
BUILD FAILED
C:\product\10.1.3.1\OracleAS_1\j2ee\home\SalesforceIntegration\LoginToSalesforce\build.xml:79: A problem occurred while establishing a connection to the BPEL Server.
Please make sure the server is running on host "127.0.0.1", port "8888".
I have turned off any firewalls and also my hosts file includes a line for 127.0.0.1 localhost.
I am at a loss as to why JDeveloper thinks the BPEL server is not running on 127.0.0.1:8888 when I know it is and I can using the BPEL Server GUI to deploy the Business Process jar just fine.
Please Help.
Thank you Much !
Regards,
Toral Kale

well am facing the same problem ... but i don't know if this is the problem .. but i copied the from project from another pc , jdeveloper versions are the same
the following is the error am facing when i try to deploy
"Buildfile: C:\ApprovalApplication\BPELProcess1\build.xml
pre-build:
validateTask:
[echo]
| Validating workflow
[validateTask] url is file:/C:/jdev10131/integration/bpm/support/files/WorkflowTaskDefinition.xsd
[validateTask] Validation of workflow task definitions is completed without errors
compile:
[echo]
| Compiling bpel process BPELProcess1, revision 1.0
[bpelc] validating "C:\ApprovalApplication\BPELProcess1\bpel\BPELProcess1.bpel" ...
[bpelc] BPEL suitcase generated in: C:\ApprovalApplication\BPELProcess1\output\bpel_BPELProcess1_1.0.jar
[bpelc] Warning: BPEL validation has warnings.
[bpelc] The following warnings were reported during validation:
[bpelc]
[bpelc] [Warning ORABPEL-10041]: Trying to assign incompatible types
[bpelc] [Description]: in line 293 of "C:\ApprovalApplication\BPELProcess1\bpel\BPELProcess1.bpel", <from> value type "{http://xmlns.oracle.com/BPELProcess1}BPELProcess1ProcessRequest anonymous type" is not compatible with <to> value type "{http://xmlns.oracle.com/BPELProcess1}BPELProcess1ProcessResponse anonymous type".
[bpelc] [Potential fix]: Please make sure that the return value of from-spec query is compatible with the to-spec query.
[bpelc]
[bpelc]
[bpelc]
deployProcess:
[echo]
| Deploying bpel process BPELProcess1 on localhost, port 9700
[deployProcess] Deploying process C:\ApprovalApplication\BPELProcess1\output\bpel_BPELProcess1_1.0.jar
BUILD FAILED
C:\ApprovalApplication\BPELProcess1\build.xml:79: A problem occurred while establishing a connection to the BPEL Server.
Please make sure the server is running on host "localhost", port "9700".
Total time: 15 seconds
and i noticed that i have this error when i try to rebuild the project
"Error: C:\ApprovalApplication\.adf (Access is denied)"
any hint what to do ..?

Cannot deploy webdynpro project from SP11 of developer studio

Hi All,
I have recently upgraded was java from SP09 to SP11 of netweaver 2004s. I have also upgraded developer studio to SP11. Now I cannot deploy webdynpro project from upgraded developer studio. SP09 developer studio can still deploy webdynpro projects.
Please help.
Thanks in advance .
Raktim

Hi,
R u trying to deploy an old DC in the upgraded studio? Is the same happening for deploying any newly created local webdynpro project? Create a simple local project and check if same problem occurs.
Regards,
Vijai

Deployment and TLB from DP BOM POS

Similar Messages

Maybe you are looking for