Deployment and Upload speed are very slow in Southeast Asia,

Normally I have spent the time to deployment not over 20 minutes per cloud service but in this week I have spent the time more than 1 hour per cloud service.
I have test the upload speed in Asia Pacific. It was very slow.
http://www.azurespeed.com/Azure/Upload
Asia Pacific
East Asia
Hong Kong
36.48 KB/s
Asia Pacific
Southeast Asia
Singapore
29.72 KB/s
Could you help to urgently check what is happen?

Hi,
There is no Report of any Outage or Downtime with any of the Azure Services.
Can you please confirm if you are still facing slow Speeds, it could also be a local network issue.
Hopefully you are not facing the issue anymore, IF you are still facing issues, I would recommend you create a support ticket if its affecting you production.
You can create a support ticket here:
http://azure.microsoft.com/en-in/support/options/
Regards,
Nithin Rathnakar

Similar Messages

My upload speed is very slow

hello I have 15/5 fios internet. My upload speed is extremely slow and it is affecting even browsing. I have a pc desktop windows 7 ~1 year old via ethernet to the router that was just sent to me by tech support to attempt to solve the problem. The new router is installed and it didn't solve the upload speed problem. Phone tech support told me to update my geforce 560 drivers but that didn't help either. Below are the speed test stats. Any other ideas? I've reset the system and power cycled the router as well. Another note is that the upload speeds are fine on the laptop connected via wifi? Strange. So I presume it is a settings issue with my desktop?
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
SendBufferSize set to [261360]
running 10s outbound test (client to server) . . . . . 1.59Mb/s
running 10s inbound test (server to client) . . . . . . 24.69Mb/s
------ Client System Details ------
OS data&colon; Name = Windows 7, Architecture = x86, Version = 6.1
Java data&colon; Vendor = Oracle Corporation, Version = 1.7.0_09
------ Web100 Detailed Analysis ------
Client Receive Window detected at 261360 bytes.
10 Mbps Ethernet link found.
Link set to Full Duplex mode
No network congestion discovered.
Good network cable(s) found
Normal duplex operation found.
Web100 reports the Round trip time = 72.18 msec; the Packet size = 1452 Bytes; and
No packet loss - but packets arrived out-of-order 0.01% of the time
This connection is receiver limited 24.83% of the time.
This connection is sender limited 74.62% of the time.
This connection is network limited 0.54% of the time.
Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: OFF
RFC 1323 Window Scaling: ON
Information: Network Middlebox is modifying MSS variable
Server IP addresses are preserved End-to-End
Information: Network Address Translation (NAT) box is modifying the Client's IP address
Server says {edited for privacy} but Client says [192.168.1.3]

I am looking at this. But please go back to your post and under options, select edit reply/post. Remove your IP Address at the bottom of the information.
I have run a trace route to your IP and one route indicates 67 RT (ms) and another indicates 78 RT (ms) from my location in Maryland, and from what I see you are in Tampa. Another good reason not to post your IP. It could be a security risk for you, even though your router acts as a firewall. The response times to you do not look bad, but perhaps after loading the new drivers, you may need to optimize your connection again.
Also try the faster speed test even if you only have 15/5, and see if it makes any difference.
Have you run the optimizer? You must open your Internet Explorer by right clicking on it and selecting run as administrator. Then copy and paste this url into the open browser.
http://my.verizon.com/micro/SpeedOptimizer/FiOS

No audio in headphone and some have distortion and some audioes are very slow.

when i play some audioes or videos there is some distortion and some audioes are very very slow . the notebook speaker is working fine but all this happen only in headphone, i check other headphone but same problem. but when i play hd vedio its audio working fine. but my skype and yahoo voice is very very slow can not hear. i reinstall audio driver from the hp website but same problem. i also check the volume system.
i have a notebookpc hp pavilion g6
product number = LH604UA
OPERATING SYSTEM= WINDOW 7 64 BIT HOME PREMIUM
Rgards
Taimur

Hello MTaimur,
Please take a look at this document, which provides troubleshooting steps to restore your drivers and software by using Recovery Manager.
Please let me know if this helps resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

No audio in microphone and some have destortion and some audioes are very slow.

when i play some audios or vedio there is some destortion and some audioes are very very slow . the notebook speaker is working fine but all this happen only in headphone, i check other headphone but same problem. but when i play hd vedio its audio working fine. but my skype voice is very very slow can not hear. i reinstall audio driver from the hp website but same problem. i also check the volume system.
i have a notebookpc hp pavilion g6
product number = LH604UA
OPERATING SYSTEM= WINDOW 7 64 BIT HOME PREMIUM

Hello MTaimur,
Please take a look at this document, which contains troubleshooting steps that hopefully, will help you resolve your mic issues. Please let me know if this helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

LAN upload speed is very slow on Satellite C650D-108

Hey guys,
I have a problem with my Toshiba C650D-108 Notebook.
First, my english is a little bad... sorry for this.
My Upload-Speed via Ethernet is very very slowly (20 kb/s) , but via WLAN i have 14MB per Second! The driver and windows are new and reinstalled. The Ethernet-Cable etc. are fine. The Download-Speed via Ethernet AND WLAN is perfect (16 MB per Second)
But why? Please help me!
Thanks in advance!
Greets

Hello
How do you check the upload speed where do you upload something? Have you tested different browsers and different webspaces where you can upload files?
Usually the upload speed is depending on your Internet connection and not type of connection (WLAN/LAN).
Anyway, maybe updating the LAN driver would help. Just check the Toshiba website and reinstall LAN driver.

My macbook pro 15" usb drives keep disconnecting and transfer speeds become very slow.

Both the usb drives on my macbook pro 15" (2012 model) have been transferring speeds very slow and when i try to use my harddisk it keeps disconnecting. Please help

when i try to play games like minecraft and somtimes when im on the internet, ive been doing some research and apparently my cpu is really low, %User: 2.68 %System: 1.87 %idle: 96.74, is that bad? and also it is very quick to charge but like i said cant keep a charge for very long, end up having to charge it almost twice a day

Safari and other apps are very slow

I am frustrated because I have goodled and tried everything. Safari and other apps on my MacBook Pro are loading very slowly. This was not the case about a month ago. I purchased this Macbook in October 2014 and it should not be as slow as it is. What can I do? I have changed a few settings and made some adjustments and the performance is still the same. Help.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

Download speeds are very slow but speed test is fi...

Hi, I did a speed test which returned a result of 36mb down and 8mb up so didn't really expect a slow download. I started a download on the iplayer which normally downloads at 28-30mb per second but it didn't get above 4mb which is not good.
Anyone experiencing slow download speeds?

Speeds have gone back up to 21mb on the iplayer. Much better but still slower than usual.
When you get used to the fast speeds of Infinity, anything slower is immediately frustrating. Like having to go back to using my Pentium 75Mhz with windows 95.......horror

Send and reply suddenly are very slow

When I hit reply or send new message I get a spinning ball for several minutes before the new window to reply appears.
Mail used to work rapidly and well for me, but in the last few days it has slowed to an unusable crawl. Any fixes?

Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations (Parallels in particular, if you have that installed) and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.

My speeds are very slow.

reporting 10.69 mbps with extreme 105 connected directly to the router. Please help!

Start by reviewing the troubleshooting tips at this sticky and post the downstream power levels, downstream SNR and upstream power levels on all channels.
http://forums.xfinity.com/t5/Basic-Internet-Connectivity-And/Connection-Troubleshooting-Tips/m-p/1253575#U1253575

I recently downloaded and installed OS X Mavericks 10.9 on my MacbookAir3,2 and have slower operating speed, especially very slow upload of e-mail attachments. Anyone got a fix, or advice on self-diagnosing the underlying problem?

I recently downloaded and installed OS X Mavericks 10.9 on my MacbookAir3,2 and now seem to have slower operating speed, especially very slow upload of e-mail attachments. Anyone got a fix, or advice on self-diagnosing the underlying problem?

Try my Mac Performance Guide.
If that doesn't help, post back here with the results of all the things you tried to do as part of that guide.

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Why are most of the apps (anything that has to search) on my iphone4 and ipad (1) running very slow (or not at all) since iOS5 update...esp google. Search seems to go quickly, but then when I try to open a link..nothing. I have turned off icloud.

why are most of the apps (anything that has to search) on my iphone4 and ipad (1) running very slow (or not at all) since iOS5 update...esp google. Search seems to go quickly, but then when I try to open a link..nothing. I have turned off icloud.

I am having the same problem. Did turning off iCloud work? Did you just turn everything off or did you actually delete the account off your iPod?

Since download of Firefox Hello desktop & laptop both on Windows 7 are very slow even after refresh, download history removed and anti virus software turned off

Since download of Firefox Hello my home desktop & laptop, both on Windows 7, are very slow to open. I have refreshed firefox, removed download history and turned off the anti virus software in extensions. All the plugins are up to date. Can we revert back to Firefox without Firefox Hello?

Firefox Hello is simply a wrapper for technology already in Firefox, it doesn't negatively impact performance if you aren't using it. Are you saying that your entire computer is slow or just Firefox?

IMAP commands are very slow and end up having the connection terminated by the server

Could you please help us on this topic ?
https://answers.microsoft.com/en-us/outlook_com/forum/oemail-osend/imap-commands-are-very-slow-and-end-up-having-the/652390ea-9658-4db6-ae2c-c8fff12a9142

Hi,
Sorry that I am not familiar with Outlook.com account and its server connection. This forum focuses on user clients issue when connect to Exchange server 2013 which is generally an on-premises mail server in domain environment.
Since your issue is related to Outlook.com account, I suggest we can also ask a question in Microsoft Outlook.com forum for more help:
http://answers.microsoft.com/en-us/outlook_com/forum?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1418613687794
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thank you for your understanding.
Regards,
Winnie Liang
TechNet Community Support

Deployment and Upload speed are very slow in Southeast Asia,

Similar Messages

Maybe you are looking for