Deployment Error with VS2012/3 and Lightswitch

I'm getting an error every time I try to run my Lightswitch app via debug mode (F5) in both VS 2012 and 2013.
I have a simple app that takes as its data source a SharePoint list in sp2010. I have managed to link to my site collection and checked the list I want. The columns are imported into LightSwitch and I build a screen from these.
I then enable SharePoint in LightSwitch
I press F5 and then I get this error (I get the same error in both VS2012 and 2013) no matter which site collection I use or which lists:
There are deployment errors. Continue?
I click No
I then this error
Error occurred in deployment step 'Uninstall app for SharePoint': Method "GetAppInstancesByProductId" does not exist
Any ideas? Thanks in advance

Hi,
According to your post, my understanding is that you got error when using the visual studio lightswitch.
You can check the errors in the stack trace to see if anything unexpected occurred.
You can get the stack trace by following article:
http://blogs.msdn.com/b/mthalman/archive/2013/08/16/how-to-get-a-stack-trace-in-lightswitch.aspx
What’s more, to ensure whether it is the code issue, you can create a new and clean app to check whether it works.
http://blogs.msdn.com/b/bethmassi/archive/2011/06/29/using-sharepoint-data-in-your-lightswitch-applications.aspx?Redirected=true
As the issue is related to LightSwich, I recommend you post the question to the forum of
Visual Studio LightSwich.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=lightswitch
More experts will assist you, then you will get more information relation to LightSwich.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Similar Messages

Deployment Error with jdk 5 and oc4j_extended_101320.zip

Hello,
I get the following error when I try to deploy my application using jdk 5 and oc4j (oc4j_extended_101320.zip) . I am sure no references of jdk1.4 are being used anywhere. I also tried deleting the persistence directory to make sure there are no lock files anywhere , but in vain. I am stuck with this problem and I urgently need a solution to get past this. Any help in this regard is appreciated. Thanks. Here is the stack trace.
This load was initiated at sim.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.
07/12/31 01:19:17 WARNING: DeployerRunnable.run java.lang.InstantiationException: Application: sim is in failed state as initialization failedoracle.oc4j.admin.internal.DeployerException: java.lang.InstantiationException: Application: sim is in failed state as initialization failed
     at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:126)
     at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52)
     at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.InstantiationException: Application: sim is in failed state as initialization failed
     at com.evermind.server.Application.setConfig(Application.java:497)
     at com.evermind.server.Application.setConfig(Application.java:340)
     at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1879)
     at oracle.oc4j.admin.internal.ApplicationDeployer.addApplication(ApplicationDeployer.java:512)
     at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:196)
     at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:93)
     ... 4 more
Caused by: java.lang.InstantiationException: Error initializing ejb-modules: [sim:oracle_sim_closed_ejb:Transfer] - Unable to load ejb-class oracle.retail.sim.closed.transfer.ejb.TransferEjb, see section 23.2 of the EJB 2.1 specificationoracle.classloader.util.AnnotatedClassNotFoundException:
     Missing class: oracle.retail.sim.closed.transfer.ejb.TransferEjb
     Dependent class: com.evermind.server.ejb.deployment.BeanDescriptor
     Loader: oc4j:10.1.3
     Code-Source: /D:/jdk5andOc4j/OC4J/oc4j_extended_101320/j2ee/home/lib/oc4j-internal.jar
     Configuration: <code-source> in META-INF/boot.xml in D:\jdk5andOc4j\OC4J\oc4j_extended_101320\j2ee\home\oc4j.jar

For internal questions please use the internal mailing lists...
--olaf

I am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.

am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.

The optical drive has probably failed. It's a fairly common thing with these slim SuperDrives. Does it read any discs you put into it? You can try resetting the SMC and pram but I'll be surprised if it helps.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I was downloading the software update for ipod touch 2gen and after it was done downloading it showed that there was an error with my ipod and when i saw it was on the lockscreen loading. its been like this for 4 hours already

I was downloading the software update for ipod touch 2gen and after it was done downloading it showed that there was an error with my ipod and when i saw it was on the lockscreen loading. its been like this for 4 hours already

What did the error message say?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Deployment error with sun app server 8.2

hi,
i'm a newbieto java programming.
i'm following the j2ee tutorial.
but i'm stuck when deploying
could anyone help me on this?
thanks in advance.
Distributing /opt/CustomerBook/dist/customerbook.ear to [localhost:4848_server]
Unable to construct properties list for: getConnectionPoolProperties
deployment started : 0%
Deployment error: Deployment timed out after 120 seconds.. See the messages.log file for details.
/opt/CustomerBook/nbproject/build-impl.xml:219: Deployment error: Deployment timed out after 120 seconds.. See the messages.log file for details.
BUILD FAILED (total time: 2 minutes 54 seconds)
EXECUTION SECTION
=================
line 219:
** <nbdeploy clientModuleUri="${client.module.uri}" clientUrlPart="${client.urlPart}" forceRedeploy="${forceRedeploy}" debugmode="false"/>**

For future references:
this happens to me too and I found that the cause is that the AM server you are going to configure, is already registered into the directory server.
Try running this command (with the obvious parameters substituted)
ldapsearch -B -T -D 'cn=directory manager' -w YOUR_CREDENTIALS -b ou=1.0,ou=iPlanetAMPlatformService,ou=services,YOUR_BASEDN -s base objectclass=* | grep YOUR_SERVERNAMEIf you found that the server you are configuring is listed here try going to AMserver console (if you have another AMserver configured) and browse to Configuration->System Properties->Platforms. If the server is here, remove it, if not, just hit Save (very important).
If this is your first AM and is a first installation you can just get rid of the Directory Server suffix and recreate it with the Top Entry alone.
Edited by: flistello on Mar 27, 2008 4:30 PM

CS6 deployment error with Application Manager Enterprise 3.1 Edition

Hello everyone,
I am currently trying to create a DesignWebPremium and Master Collection CS6 deployment package with AMEE 3.1 (Application Manager Enterprise Edition) on Windows 7 EE x64 without any luck.
I keep getting the following error log:
11/16/2012 06:35:51[INFO] AdobePackageBuilder - Build Version - 3.1.105.0
11/16/2012 06:35:51[INFO] AdobePackageBuilder - Logging Level verbosity Set to 4
11/16/2012 06:35:55 [INFO] AdobePackageBuilder - Successfully retrieved TargetName from OptionXML.
11/16/2012 06:35:57 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copying the content of 1 disk
11/16/2012 06:37:31 [ERROR] AdobePackageBuilder - Failed to create Setup.ini file for Acrobat Customized Wizard.
11/16/2012 06:37:32 [ERROR] AdobePackageBuilder - Failed to create the zip file.
11/16/2012 06:37:32 [ERROR] AdobePackageBuilder - Error zipping PkgConfig.xml.
so I thought I could be smart and just take out Acrobat from the install package, but still no luck:
11/15/2012 07:39:41[INFO] AdobePackageBuilder - Build Version - 3.1.105.0
11/15/2012 07:39:41[INFO] AdobePackageBuilder - Logging Level verbosity Set to 4
11/15/2012 07:39:46 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copying the content of 1 disk
11/15/2012 07:42:10 [ERROR] AdobePackageBuilder - Failed to create the zip file.
11/15/2012 07:42:10 [ERROR] AdobePackageBuilder - Error zipping PkgConfig.xml.
I have tried creating the deployment package as both 32-Bit, 64-Bit, including updates and not including them, running AMEE 3.1 with administrative access and without - it just doesn't work...
I'll be grateful for any constructive help.

Hi,
I just did come across this error today, and thought of sharing with the solution. This error is due to insufficient previlages of user, while he is trying to configure the hyperion Products. So all you have to do to solve this is, while you try to configure, right click on the configuration utility and run as administrator, and do the configuration as usual.This would solve this issue. I did not have this issue with Windows 2003 Server, but faced this while installing on Windows 2008 Server.
Thanks,
Leo Jose.

Graphic problems/errors with Mainstage 3 and MBP (15'' 2011)

Hi,
I bought Mainstage 3 for my MBP (15'' 2011).
When i click con "perform" i get graphic errors.
I have the same issue with the old Mainstage version since Mountain Lion.
Also a fresh installation didn't help.
I think i'm not the only one with this issue!
I don't know how to report a bug?
Perhaps someone can help me.
(and I'm probably not the only one (see feedback in Apple Store) If you also have this problem, please add a comment with your configuration (Hardware, Software))
/forgotten ebi
So, here an example how it looks like when i click on "perform":

Same configuration,same problem. BUT I found a workaround.
Mainstage has this error with the AMD video card and/or a second monitor connected.
With a little app (http://gfx.io) it's possible to really force the MBPro to use the Intel Graphics card.
This will work only with the internal screen, not with a second screen connected.
And sometimes you need to restart, to really make the Intel video card free.
This works fine...In the meantime of a fix.

Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on T61/T61p

Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD. This information can help address blue screen errors specifically related to Turbo Memory, but may not solve errors related to other issues. Please read through the instructions completely, make sure they apply to your system, and after attempting the solutions please post back with your feedback for the community.
Some users may experience random blue screen errors with ThinkPad
systems running Windows Vista with Intel Turbo Memory hardware. These
blue screens may occur during normal usage on the system or they may
occur when booting into Windows Vista. Blue screens related to the
Intel Turbo Memory hardware may reference a stop code of 8086 with
memory address locations of {0, 0, 0, 0}.
There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
Step 1: Update Intel Turbo Memory Driver
If the driver version is before version 1.0.1.1004-7.0.3.1001, please
update to this version.
To determine what version of the Intel Turbo Memory driver is installed:
1.    Click Start, then click Control Panel.
2.    Click System and Maintenance.
3.    Click System.
4.    Click Device Manager.
5.    Expand the Storage controllers category.
6.    Double-click Intel Flash Cache Logic Chip.
7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
The new driver and installation instructions can be found here.
Note: The Intel Matrix Storage Driver is updated with this package.
Step 2: BIOS version
If your BIOS version is older than those listed below, please update to the version listed.
How to check your BIOS version:
Turn off the system.
Turn on the system.
While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
The
BIOS Setup Utility menu will be displayed. If you have set a supervisor
password, the BIOS Setup Utility menu appears after you enter the
password.
Check BIOS Version and Embedded Controller Version.
Turn off the system.
System BIOS versions:
ThinkPad T61/T61p (14.1 inch widescreen with IEEE 1394 model) - BIOS version 1.22 (7LET52WW)
Please
remember that these updates do not solve every possible system blue
screen, but they do resolve several problems related to the Intel Turbo
Memory driver.
Message Edited by Tim_Lenovo on 11-30-2007 07:03 PM
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

Thanks Tim,
I do have my T61p fully up-to-date to the latest drivers and updates (via System Update and the Drivers&Software web page when the former is not that up-to-date).
At the moment the most recurrent problem is this:
http://forum.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=55
which has been longly speculated here:
http://forum.thinkpads.com/viewtopic.php?t=47755
My other angst is the boot-time chkdsk hang-up problem:
http://forum.thinkpads.com/viewtopic.php?t=52765&highlight=chkdsk
I just wonder if this purely a Vista issue when using NV cache, the disk spinning down at almost exactly 1 hour from the beginning of the chdsk operation seems too much of a coincidence.
This is my T61p configuration:
Intel Core 2 Duo T7700 2.4GHz
BIOS version 1.26-1.06
4GB RAM 2 SO-DIMMs
nVidia Quadro FX 570m with 512MB VRAM
WUXGA LCD
Seagate 7200.2 160 GB
4GB RAM 2 SO-DIMMs
Windows Vista Ultimate 32bit (waiting to move to 64bit)
thanks,
andrea
Message Edited by abarbieri on 12-05-2007 03:48 PM
T61p - 15.4" - T7700 - FX 570M 256MB - 4GB RAM - ST916023AS - 4965AGN - BT - FPR - 9 cell - Vista Ult. x86
T21p - 14" - PIII 850MHz - S3 Savage/IX 8MB - 512MB RAM - 100GB 7200rpm - WinXP x86

Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
This information can help address blue screen errors specifically
related to Turbo Memory, but may not solve errors related to other
issues. Please read through the instructions completely, make sure they
apply to your system, and after attempting the solutions please post
back with your feedback for the community.
Some users may experience random blue screen errors with ThinkPad
systems running Windows Vista with Intel Turbo Memory hardware. These
blue screens may occur during normal usage on the system or they may
occur when booting into Windows Vista. Blue screens related to the
Intel Turbo Memory hardware may reference a stop code of 8086 with
memory address locations of {0, 0, 0, 0}.
There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
Step 1: Update Intel Turbo Memory Driver
If the driver version is before version 1.0.1.1004-7.0.3.1001, please
update to this version.
To determine what version of the Intel Turbo Memory driver is installed:
1.    Click Start, then click Control Panel.
2.    Click System and Maintenance.
3.    Click System.
4.    Click Device Manager.
5.    Expand the Storage controllers category.
6.    Double-click Intel Flash Cache Logic Chip.
7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
The new driver and installation instructions can be found here.
Note: The Intel Matrix Storage Driver is updated with this package.
Step 2: BIOS version
If your BIOS version is older than those listed below, please update to the version listed.
How to check your BIOS version:
Turn off the system.
Turn on the system.
While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
The
BIOS Setup Utility menu will be displayed. If you have set a supervisor
password, the BIOS Setup Utility menu appears after you enter the
password.
Check BIOS Version and Embedded Controller Version.
Turn off the system.
System BIOS versions:
ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
Please
remember that these updates do not solve every possible system blue
screen, but they do resolve several problems related to the Intel Turbo
Memory driver.
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

Dear Tim,
First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61. I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14). However, the BSOD recurrs.
For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS. Notwithstanding that, BSOD recurrs.
During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)). In either case, BSOD recurrs.
I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install. I never install any hardware (e.g. RAM). And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment. In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
Memory: 1.00 G.B.
System: Windows Vista Business (32-bit)
Hard Drive: 160 G.B. @ 7,200 r.p.m.
And, of course, with Intel Turbo Memory 1 G.B.
I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless. I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to. The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here. Any advice will be tremendously and enormously appreciated.
Kevin Chen @ Taiwan

"Sorry, we couldn't find your file. Is it possible it was moved, renamed or deleted?" Error with SharePoint 2013 and Office Web Apps

When I try to open any docx file from the SharePoint it opens on web via office web apps, and when I choose edit document > edit in Word , Microsoft word show me this error "Sorry, we couldn't find your file.
Is it possible it was moved, renamed or deleted?" followed by half a url to the end users document on onedrive.
I noted that this problem only happens with Docx files, with specific users and only when you try to open the Docx file from OneDrive folder ( SkyDrive ) which is hosted in the MySite.
Any Help?

Hi,
According to your post, my understanding is that you failed to open the Docx file from OneDrive folder ( SkyDrive ).
Since this problem only happens with Docx files, with specific users, I recommend to delete and recreate the personal site for the specific users.
More information:
Configure My Sites in SharePoint Server 2013
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Full Export/Import Errors with Queue tables and ApEx

I'm trying to take a full export of an existing database in order to build an identical copy in another database instance, but the import is failing each time and causing problems with queue tables and Apex tables.
I have used both the export utility and Data Pump (both with partial and full exports) and the same problems are occurring.
After import, queue tables in my schema are unstable. They cannot be dropped using the queue admin packages as they throw ORA-24002: QUEUE_TABLE <table> does not exist exceptions. Trying to drop the tables causes the ORA-24005: must use DBMS_AQADM.DROP_QUEUE_TABLE to drop queue tables error
As a result, the schema cannot be dropped at all unless manual data dictionary clean up steps (as per metalink) are done.
The Apex import fails when creating foreign keys to WWV_FLOW_FILE_OBJECTS$PART. It creates the table ok, but for some reason the characters after the $ are missing so the referencing tables try to refer to WWV_FLOW_FILE_OBJECTS$ only.
I am exporting from Enterprise Edition 10.2.0.1 and importing into Standard edition 10.2.0.1, but we are not using any of the features not available in standard, and I doubt this would cause the issues I'm getting.
Can anyone offer any advice on how I can resolve these problems so a full import will work reliably?

Thanks for the lead!
After digging around MetaLink some more, it sounds like I'm running into Bug 5875568 (MetaLink Note:5875568.8) which is in fact related to the multibyte character set. The bug is fixed in the server patch set 10.2.0.4 or release 11.1.0.6.

Deployment error with netbeans vwp

when i try to run my vwp project i get this error.
Starting server Bundled Tomcat (5.5.17)
Starting of Tomcat failed.
D:\Documents and Settings\Erdal\erdalWEB\nbproject\build-impl.xml:475: Deployment error:
Starting of Tomcat failed.
See the server log for details.
all i do is to open a new Visual Web Application project, drag and drop a label and deploy it. nothing complicated but couldn't found where the problem is. please give me a hand, a hint, a way to get over this...

Read this, as it says:
See the server log for details.

Airplay error with airport express and apple tv

I receive this message "An unknown error (-15006) occurred while connecting to the AirPlay device" when trying to play audio from iTunes on Macbook Pro to my airport express and/or apple tv. Both airport express and apple tv work fine with my iphone and ipad as well as streaming video from itunes library to apple tv from the Macbook. I have tried the previously posted solutions, but nothing has worked yet.

http://www.cultofmac.com/178460/the-real-reason-why-macs-before-2011-cant-use-ai rplay-mirroring-in-mountain-lion-feature/

Javascript error with f:subview and jsp:include

Hi,
I have tried to include one jsp page with jsf components into another jsp page with jsf components. But somehow I get a Javascript error.
I have of course included the jsp:include into an f:subview like this:
<f:subview id="tree" rendered="#{tabsBacker.treeRendered}">
<jsp:include page="mission.jsp" />
</f:subview>In mission.jsp, all non-jsf tags are surrounded by f:verbatim tags (otherwise, JBoss would complain anyway).
The Javascript error says: "elements.form1:_link_hidden_ is null".
"form1" is the name of the form in my jsp page which includes the other one.
As soon as I remove the jsp:include thing, everything works fine. The include happens in a t:panelTabbedPane, and (probably as a result of the javascript error), the tab where the included page should be shown, can't be displayed. I can click on the tab, the page is reloaded, but nothing else happens.
The error occurs in IE and in Firefox.
Can anyone help me to solve this problem??
Kind regards,
Wiebke

It's just a jsp fragment file. Here's the start of the jspf included above:
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://www.ibm.com/jsf/html_extended" prefix="hx" %>
<f:subview id="browseForm">
<table class="box" width="100%">
     <tr>
          <td><h:outputText value="#{labels.someValue}" styleClass="smalltitle"/></td>
     </tr>And so on. This was just done to stop the jsp files becoming too long, I think. So the subview tag is included in the jspf file rather than around the jsp file as you have it.
Illu

Deployment error with LabVIEW 8.0 using a Desktop PC as a RT Target

Hello!
I am attempting to use LabVIEW Real-Time 8.0 with a desktop PC as the RT Target.
Everything appears fine when I look at the computer using MAX. I can fiddle with the Target’s IP, install software and transfer files between my Windows machine and the RT machine without any difficulties.
To get started with LabVIEW I have followed the instructions in NI’s document: "Getting Started with the LabVIEW Real-Time Module".
( A copy may be found at this location: http://www.ni.com/pdf/manuals/371375a.pdf )
My difficulties arise under the "Creating a Real-Time Project and Application" subsection, which begins on page 8 of the document.
I follow the instructions to create a project using the Real-Time Project Wizard and all goes well – I can connect to the target without issue in LabVIEW and monitor its performance with the Real-Time System Manager – until I try to deploy and run the VIs on the RT Target.
The deployment process fails nearly without exception every time I try to deploy any of the dependent VIs using the Project Explorer (I say nearly because maybe 1/100 times a VI is deployed successfully). I believe all the permissions have been properly set (in both LabVIEW and Windows) to allow the host and the target to communicate and collect data so I am not sure what the problem is.
Interestingly enough, VILIB dependencies always deploy successfully -- And the intrigue does not end there! If I build a standalone Real-Time application (like that detailed on pages 18-21 of the manual linked above) I am able to deploy to the RT Target. Setting the application to run on startup, the RT computer successfully reboots and is able to generate a sine wave and I can view using the host VI on My Computer.
I would like to be able to build and deploy VIs freely using the Project Explorer but am not sure how to achieve this seemingly simple goal. If anyone has encountered a problem similar to mine even feels that they know if the problem is related to hardware or software the help would be much appreciated.
Thanks,
Tom

Bob,
My System uses Windows XP. I use MAX 4.0.0.3001 to install software on the Real-Time computer. I am using LabVIEW 8.0 to deploy VIs to the Real-Time System. Also, if its any help, I am a D-Link DGE-550T Gigabit Ethernet Adapter.
The Remote System uses LabVIEW Real-Time 8.0. Note that a fair amount of software to add functionality to the system has also been installed here from My System via MAX.
Here is an example of how my Deployment fails:
I follow the instructions in "Getting Started with the LabVIEW Real-Time Module" and create a project using the Real-Time Project Wizard. (The contents of such a program may be viewed in a picture that is included in the ZIP file I have attached.)
I open the LVPROJ window and proceed by connecting to my RT device. I right click on the target and choose 'Connect'.
A Deployment window will pop up and display the following text:
Deploying RT (successfully deployed target settings)
I close the window and proceed to deploy my primary VI titled 'target - multi rate - variables - fileIO.vi. I right-click on the target and choose to deploy. Again, a deployment window will pop up - this time with the following text:
Deploying My Computer
Deploying variables - network - RT.lvlib
Deploying variables - network - RT.lvlibistop \\192.168.1.2\ variables - network - RT\stop.
Deploying variables - network - RT.lvlibidata \\192.168.1.2\ variables - network - RT\data.
Deploying RT (successfully deployed target settings)
Deploying support - acquire data.vi (3.20K)
Deploying Trim Whitespace.vi Failed to download Trim Whitespace.vi
The deployment usually, but NOT always, fails on Trim Whitespace.vi. In any case, the deployment will always fail for some VI and continue to fail in the same manner until My System is rebooted. Attempting to individually deploy any of the VIs also fails the vast majority of the time and if any VI fails it will continue to do so (...until a hard reboot, in which case it may or may not fail assuredly).
Attached to this post is a ZIP containing all the files associated with this RT Project (not including the libraries of dependencies associated with LabVIEW, of course).
If you feel that more information about hardware or software in use would be useful, please ask.
Thanks,
Tom
Attachments:
LabVIEW RealTime Project.zip ‏193 KB

Deployment Error with VS2012/3 and Lightswitch

Similar Messages

Maybe you are looking for