Deployment Failed - Error Codes

Hi.. Again!!!
I'm deploying an App-V Package to a couple of test machines but on the deployment monitoring I get:
Error Code:
0x80070002 (-2147024894)
Error Description:
The system cannot find the file specified.
Does anyone know what I can do here? I've created a whole new deployment etc and still no luck, I'm not sure where I can look to be able to see what file it's actually talking about to try and resolve the issue. Can anyone point me in the right direction?
Thanks... again!!!
Jay

Yes, I know this is an old post, but I’m trying to clean them up.
Did you solve this problem, if so what was the solution?
What does the VirtualApp.log log say?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

MDT 2012 Litetocuh Deployment Failed, Return Code = -2147467259 0x0004005

Here is what I have tried. I have tried recreating the DeploymentShare. Moved my Deployment Test Share to the standard 2008 Server running MDT 2012. I have setup a Win7 x64 box as the Deployment Manager. I am still getting the following error:
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Copy OEM files.
Incorrect function, (Error: 00000001; Source: Windows)
The execution of the group (Install has failed and the execution has been aborted. An action failed.
Operation abourted (Error: 80004004; Source Windows)
Failed to run the last action: Copy OEM files, Execution of task sequence failed.
Incorrect funtion. (Error: 00000001; Source: Windows)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
Recreated the Image, Task Sequences, CS.ini and Boot.ini) Incorporated all OOB Drivers, Packages. Using
a USB 16Gb flash drive with LiteTouchx86.
List last time we tried to create a separate deployment share. Copy all the preexisting data from a working known good deployment share with images, task
sequence, cs.ini and all image files. Still getting the same issue.
Finally checked some of the Google, technet and forums for any assistance but non seem to do the trick.
I'm new to the process but have been working with a fellow tech who has been working with MDT for six months and he can not find the issue either.
Thanks for all your help up front.

Can you post your log files?
IT Support " Scripting Noob "

OSD task sequence computer doesn't join domain - error NetJoinDomain failed error code is [1355]

I am using sccm 2012R2 and trying to deploy a task sequence to Ultrabook UEFI with usb Ethernet adaptor
I have inject network drivers in boot image and in sccm.
Task sequence runs fine till Setup Windows and Configuration. After this step computer reboots and boots in windows with local administrator account. Doesn't join to domain
I have tried ping domain and domain controller during Apply network Settings, I can ping fine and get an ip address as well.
setuperr.log file shows following error:
[Djoin.exe] Unattented Join: NetJoinDomain failed error code is [1355]
I can image other computer using x86 bootimage fine.
It is x64 boot image with UEFI Task sequence which is causing issues for me.
I have tested domain join AD account and able to do domain join same machine manually.
Need advise, not getting anywhere, already spend few days to figure out.
RJ
RJ09

Ultrabook I am using have SSD if this could be part of problem.
I also see errors in Panther\UnattendGC\setupact.log
[DJOIN.EXE] Unattend Join: DebugJoinOnlyOnThisError =[Null]
[DJOIN.EXE] Unattend Join:DsGetDcName failed: 0x54b, last error 0x0, will retry in 5 seconds
[DJOIN.EXE] Unattend Join:DsGetDcName failed: 0x54b, last error 0x0, will retry in 5 seconds
About 20 times
Exit, returning 0x0
RJ09

Litetouch deployment failed, Return Code = -2147023504

I suddenly started getting this error on all my task sequences. I created a new vanilla sequence and got the error on it as well. It doesn't matter if I select a x86 image task or x64. This is across multiple pieces of hardware as well. Please Help!
<![LOG[LTI beginning deployment]LOG]!><time="11:01:31.000+000" date="05-22-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Event 41016 sent: LTI beginning deployment]LOG]!><time="11:01:32.000+000" date="05-22-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[About to run command: "X:\Deploy\Tools\X86\TsmBootstrap.exe" /env:SAStart]LOG]!><time="11:01:32.000+000" date="05-22-2013" component="LiteTouch" context="" type="1" thread=""
file="LiteTouch">
<![LOG[Property LTIDirty is now = TRUE]LOG]!><time="11:01:32.000+000" date="05-22-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Command completed, return code = -2147023504]LOG]!><time="11:01:32.000+000" date="05-22-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Litetouch deployment failed, Return Code = -2147023504 0x80070570]LOG]!><time="11:01:32.000+000" date="05-22-2013" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">
<![LOG[Event 41014 sent: Litetouch deployment failed, Return Code = -2147023504 0x80070570]LOG]!><time="11:01:32.000+000" date="05-22-2013" component="LiteTouch" context="" type="1" thread=""
file="LiteTouch">
<![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="11:01:32.000+000" date="05-22-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">

I found the issue with this. Apparently the computers I was running these sequences on had previous deployments run and interrupted on them. Even though the deployment wizard wasn't flagging them as "dirty" clearly there was something hanging around
on the HD that was causing issues. I used diskpart to run a quick format on the OS volume and all is good.
Maybe this will help someone googleing in the future.

MDT 2013 - Litetouch deployment failed, Return Code = -2147467259 0x80004005

I'm attempting to deploy an image that I have recently captured with MDT. I was able to capture the image without any problems and after capturing, it booted up properly. But now when I go to deploy the image using a Standard Task Sequence it
errors out. It does boot into WinPE and gets to the installing operating system portion then spits out the following 8 errors:
(5624):2: Run ImageX: /apply "\\PDC31089\DeploymentShare$\Operating Systems\Win7_BUP_1-31-14\Win7_BUP_1-31-14.wim" 1 C:
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Unknown error (Error: 000015F8; Source: Unknown)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015F8; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005After I receive the error messages if I attempt to restart the computer and allow it to boot up it just comes up with:"An operating system wasn't found. Try disconnecting any drives that don't contain an operating system"
I have tried the following to resolve this issue:
Create a new deployment share with only network drivers added and the one .WIM that was captured with MDT as well as one Task sequence.
Update to MDT 2013
Update Deployment share and completely regenerate Boot images
Tried starting deployment from within Windows by mapping the drive and executing litetouch.vbs
Also tried starting deployment using USB boot disk
I'm running out of ideas and seem to keep getting the same 8 error messages. It's very aggravating and am hoping that someone can point me in the right direction.
I've included some log files on Skydrive at: https://skydrive.live.com/redir?resid=6375A8F9E8089918%21105

I came across this post recently. I am having the same string of errors suddenly when I try to deploy any image from my MDT 2013 server now. Previous images now fail to install soon after the Inject Drivers task sequence at the Install Operating System sequence.
Each time I try to deploy an image(have tried several each with different task sequences), I get the same 7 errors.
The errors produced are:
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Incorrect Function (Error: 00000001; Source: Windows)
The execution of the group (Install) has failed and the execution has been
aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Install Operating System. Execution of task
sequence failed.
Incorrect Function
(Error: 00000001;
Source: Windows)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
My HD size is 146GB with about 71GB being free.
The BDD.log file is too large to post here apparently. Here are the
last bits of it.
<![LOG[Assume this disk is the destination Disk, and verify.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart"
context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[TargetPartitionIdentifier is set, find disk: SELECT * FROM Win32_LogicalDisk WHERE Size = '499577253888' and VolumeName = 'OSDisk' and VolumeSerialNumber = 'CA3BC8A9']LOG]!><time="11:36:58.000+000" date="09-26-2014"
component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Search for Drive: TargetPartitionIdentifier SELECT * FROM Win32_LogicalDisk WHERE Size = '499577253888' and VolumeName = 'OSDisk' and VolumeSerialNumber = 'CA3BC8A9']LOG]!><time="11:36:58.000+000" date="09-26-2014"
component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Found Drive: C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Property OSDTargetDriveCache is now = C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Property OSDisk is now = C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Target Drive Letter Found: C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Found OS Drive: C 0]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[New ZTIDiskPartition : \\MININT-I3DUVLI\root\cimv2:Win32_LogicalDisk.DeviceID="C:" \\MININT-I3DUVLI\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1"]LOG]!><time="11:36:58.000+000"
date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Check Disk [0] <> [0] OK to skip.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[####### NOTE: If this is one of the last lines in your BDD.log file, check C: for the most up to date bdd.log!!!]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart"
context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[ZTIDiskpart processing completed successfully.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Event 41001 sent: ZTIDiskpart processing completed successfully.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread=""
file="ZTIDiskpart">

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Try the troubleshooting for that error code on this page : iTunes: Advanced iTunes Store troubleshooting - Apple Support (search for '8003' on the page, it's just below half-way down)

Lenovo 3000 N100 Network issue / Wireless Stack initialization failed, error code 117

Hi,
Lenovo 3000 N1000 with 1GB Ram, Win XP SP2, purchased in May 2006. WLAN network with WPA-PSK key worked without any issues so far and is still accessible with PC.
After transferring music via from my notebook to my mobile Bluetooth all network adapters seem to be disconnected. Neither Access Connections (AC) nor Windows can find any wireless network. Also if I try to configure any LAN, WLAN with Windows I get the message that all network adapters have been removed. However I cannot spot any issue in the device manager as all parts are shown to be working OK.
This is what I've done so far:
1) Checked Radio switch ---> on
2) FN +F5 --> connection on
3) Uninstalled AC, downloaded and installed most actual version (5.00 Build 7VCX32WW)
4) Installed new version for wireless driver for Intel(R) PRO/Wireless 3945ABG (version 12.0.0.82)
Still, even if I uninstall AC to check if WLAN is working at all, Windows gives the error message that all network components have been removed.
Diagnose Tool gives the following output:
"Wireless Stack initialization failed, error code 117"
Logfile:
Description : Intel(R) PRO/Wireless 3945ABG Network Connection
Type : Wireless LAN Adapter
DriverVersion : 10. 5. 1. 59 ----> why is the old driver version??????????
PNPID : PCI\VEN_8086&DEV_4227&SUBSYS_10118086
SupplicantVersion : AEGIS Protocol (IEEE 802.1x) v3.5.3.0
ERROR AcSvc( SYSTEM(Prvlg).1108.4580) [9/3]11:04:15:703 CAcGolan::GetRadioStateInDriver: Golan API GetRadioState() missing!
Hope this is enough information for anyone of you in order to suggest any solution. As I could see from previous threads some of you experienced similar problems in the past and could fix them somehow. However I couldn't find anyone with exactly the same problem.
Thanks much in advance for any advice you might have.
Flo

Hi
I have this problem also with my Lenovo 3000 V200.
Sometimes when I boot up the PC it will connect to the network and everything works just fine.
At other times, after boot, the "wireless stack initialization failed, error code: 118" problem occurs
and the only way to solve it seems to be a PC restart. Nothing else I do will bring the network up.
If I study the Networking tab in Task Manager it indicates that no adapters are available (wired eth.
access also fails). At a few occations connectivity have failed alltogether (i.e. a reboot have not solved
the problem). Last time this occured I had to reinstall the complete system (from a previous backup)
to get networking up.
I have tried different versions of Access Connections (5.02, 5.12, 5.21) and the same problem occurs
at seemingly random instances in time. This is obviosly a problem with the Access Connections software
since the Wireless networking works fine when I let windows manage it...
Anyone with a fix?
/Fredrik

DVD Burn fails (Error code 0x80020022), newish drive, just applied updates

Hello,
when i try to burn a data dvd with a variety of files from finder on my power mac g5 it thinks a while and then fails with the message:
Burning the disc failed because communication to the disc drive failed (Error code 0x80020022)
I just downloaded the latest OS updates last night.
Disc utility showed permissions problems in some files on my boot drive including in a darwin folder but they repaired fine.
Two weeks ago apple replaced my superdrive and i hadn't tried burning a dvd since then, but cds did and do burn fine.
This computer is under warrantee but in case the latest software updates caused this, or if someone has an easy fix that would allow me to save the trip to the store for analysis and potential couple day wait...
i'm all ears!
Thanks, Will
Software overview
System Version: Mac OS X Server 10.4.8 (8L127)
Kernel Version: Darwin 8.8.0
SONY DVD RW DW-U21A:
Firmware Revision: AADB
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
hardware
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (2.2)
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (2.2)
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Power Mac G5 Mac OS X (10.4.8)

Thank you for your help!
At one point in the last few days i did run out of disk space on one drive, but i think i had 5Gig free on the short drive when i was trying it earlier, and i have upped that to 30.
My spindled HP DV-16Xs worked on the drive i had before pretty darn well.. I've tried a bunch of unlabeled ones, i've also tried burning at 1x, and i went out and bought some jewel cased verbatim dvd-r 16Xs, same problem.
I will take one more shot at finding the best media using that website, get some 8Xs if i can find them, before hauling it into apple.
without the dvd burner it's hard to backup very well, I was planning to get a external hard drive next month.

My reinstallation of itunes is failed, error code is error 7 (windows error 126) the system find not msvcr80.dll script

my reinstallation of itunes is failed, error code is error 7 (windows error 126) the system find not msvcr80.dll script

https://discussions.apple.com/thread/5817040?tstart=0
....try everything in that thread, should fix the issue.

OBIA 7.9.5 "Financial Analytics" GL/AR Fact load fails "error code 36331"

Hi all ,
For Financial analytics7.9.5 below fact load getting failed "error code 36331".
'SIL_GLOtherFact_Full' has failed.
'SIL_GLCOGSFact_Full' has failed.
'SIL_GLRevenueFact_Full' has failed.
'SIL_ARTransactionFact_Full' has failed.
Let us know how to fix this up.
Should i need to follow the comments posted in this link
Re: Help !!! Re: Fianacial Analytics failed with Error Code = 36331
thanks
saran

ORA-12520: TNS:listener could not find available handler for requested type of serverI've not seen this error myself, but looking on Google it appears to be an unsolved problem on OBIA.
Since it's intermittent then it rules out obvious things like the Oracle database being down or the connectivity being incorrectly configured.
Looking on My Oracle Support (metalink) I found discussion of the error with reference to a completely different product but around the issue of parallelism.
If I had to guess I'd say that the keyword in the error is available - the oracle DB is being swamped with more requests that its configured to handle.
My suggestion would be speak to your DBAs and ask them to monitor the number of sessions on Oracle DB whilst your ETL is running and watch for any limit being breached. If possible up that limit, or reduce the amount of ETL tasks running in parallel.
I'd also suggest raising an SR with Oracle since it's evidently a not-uncommon problem.

Backup failed error code o8x100037

any ideas?

Hi,
>>Backup Failed Error Code 2155348129 Volume Shadow Copy Service error:
As the following article suggests, this error can be caused by the incorrect Active volume.
Troubleshooting VSS Writer Failure
http://social.technet.microsoft.com/wiki/contents/articles/1261.troubleshooting-vss-writer-failure.aspx
If the issue persists, we can follow the article below to re-register the dlls that are needed by the VSS service to see if it helps.
Volume Shadow Copy Service and DLLs
http://blogs.technet.com/b/sdoakes/archive/2006/02/03/418722.aspx
In addition, the following thread focused on the similar issue and can be referred to as reference.
Failed Full System Backup Error: 2155348129
https://social.technet.microsoft.com/Forums/windowsserver/en-US/7eaba8d9-2fc8-41fd-a2ef-18a8d8b9186e/failed-full-system-backup-error-2155348129?forum=windowsbackup
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

QuickTime Install Failed Error Code -3 - At Wits End Ready to Return IPOD

I have been trying to install QuickTime with Windows XP for the past 8 hours. First, I receive the message Install Failed Error Code -3. Then I uninstall software and download and get Error 1722 and the Error 1603 Fatal Error. I'm in a vicious loop of installing/uninstalling. Called Apple technical support and they walked me through the same steps I've been going through all day and I still have the same results. I'm ready to return my daugheter's iPod. I have looked at all the technical help available and have completed every recommended solution with no success. What am I missing? Suicidal in Chocolatetown, USA.

switch off antivirus and antispyware applications
Download Quicktime 7.0.3 Standalone Installer
http://www.apple.com/quicktime/download/standalone.html
Run the install from your hard drive, not over the internet
That should fix you up.

Deployment failed error - need of five star - please answer this

Dear All ,
One of 100 error iam facing daily on LV 8.0
I have made my project in my laptop and started the application it work fine in laptop .
but same .lvlib file i have transfered to server (only modification i did is in the shared variable) iam receiveing deployment failed error .
Please find the attachment and give some hint to solve this problem.
Attachments:
deployment error.jpg ‏74 KB

ramji,
I think the following kb How Do I Deploy Network Shared Variables From a Compiled Executable? may provide some help. When building your executable, make sure you include your lvlib that contains yoru shared variable in the "support files" section of the application builder. Also, try including your lvlib in the data directory instead of the actually exe itself. Let us know. thanks!
Chris c
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

Premiere Pro update failed - error code U43M1D206

Hi,
Premiere Pro update failed - error code U43M1D206
Windows 7 64 bits
All other apps were updated.
I tried all theses steps :
Solution 1: Restart your computer and try again.
Solution 2: Download the update from Adobe.com.
Solution 3: Uninstall and reinstall the Adobe Creative software you are facing difficulties applying the update too.
Avast Antivirus :
Infection MSIL:GenMalicious-ML [Trj]
Please look at the picture below :
Thank you for your help ;-)
Gilles

Hi Gilles V,
Please try: Error downloading Creative Cloud applications
Thanks,
Atul Saini

Malloc: *** mmap(size=16777216) failed (error code=12)

Hi All,
I am writing a small game for iphone. It has about 18 levels. After running 8 levels or so It is giving following error
malloc: * mmap(size=16777216) failed (error code=12)
* error: can't allocate region
* set a breakpoint in mallocerrorbreak to debug
I have googled it but no luck at all. Any helper pointers will be greatly appreciated.
Thanks in Advance
- Ravi

ooftish.com wrote:
I have googled it but no luck at all.
When you search on these topics, you should delete the number strings/errors such as 16777216 - those are specific to you.
As an example, googling: malloc: mmap(size=
...seems to find more than one thread that discusses this back in 2008.

Deployment Failed - Error Codes

Similar Messages

Maybe you are looking for