Deployment Failure - thick image - (5627) dism.exe (MDT 2012 Update 1)
I installed MDT 2012 Update 1 on a new server and was testing it out with our Windows 8 deployment. I captured a thick image which works fine when I boot to Win PE and apply it using dism.
I imported the image into the the deployment share (custom, no setup/sysprep) and created a Custom Task Sequence with just 3 tasks to do a custom format (command line using dism), apply the image (choose specific disk and partition), and restart the computer.
However, when I go through the task sequence, it comes up with some errors and appears that it gets sysprepped again because it prompts me to answer questions that weren't a part of my original sysprep (EULA, adding a new user, etc).
Any idea where I need to look to get this fixed? I've shared the BDD.log and LTIApply.log on my SkyDrive.
https://skydrive.live.com/?cid=0FB4C394CC7A79E1&id=FB4C394CC7A79E1%21105
Here's a snip of the results
<![CDATA[FAILURE (Err): 53: Copy File: C:\MININT\unattend.xml to C:\Windows\Panther\Unattend.xml - File not found
FAILURE ( 5627 ): 2: Run DISM.exe
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Unknown error (Error: 000015FB; Source: Unknown)
Failed to run the action: Install Operating System. Execution has been aborted
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015FB; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]>
Please advise.
Thanks in advance.
I installed MDT 2012 Update 1 on a new server and was testing it out with our Windows 8 deployment. I captured a thick image which works fine when I boot to Win PE and apply it using dism.
I imported the image into the the deployment share (custom, no setup/sysprep) and created a Custom Task Sequence with just 3 tasks to do a custom format (command line using dism), apply the image (choose specific disk and partition), and restart the computer.
However, when I go through the task sequence, it comes up with some errors and appears that it gets sysprepped again because it prompts me to answer questions that weren't a part of my original sysprep (EULA, adding a new user, etc).
Any idea where I need to look to get this fixed? I've shared the BDD.log and LTIApply.log on my SkyDrive.
https://skydrive.live.com/?cid=0FB4C394CC7A79E1&id=FB4C394CC7A79E1%21105
Here's a snip of the results
<![CDATA[FAILURE (Err): 53: Copy File: C:\MININT\unattend.xml to C:\Windows\Panther\Unattend.xml - File not found
FAILURE ( 5627 ): 2: Run DISM.exe
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Unknown error (Error: 000015FB; Source: Unknown)
Failed to run the action: Install Operating System. Execution has been aborted
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015FB; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]>
Please advise.
Thanks in advance.
Hi Mathew,
I have the similar error deploying a image (no sysprep) using the standard client task sequence. There are 2 partitions, one 500MB for boot and the other remaining partition is for OS. Do you have solutions to resolve the errors? Greatly appreciate
any advice given. Thanks.
Regards,
Eng Chai
Eng Chai
Similar Messages
-
MDT 2012 Update 1 Boot Image Creation Fails in SP1
I have my site server (SCCM 2012 SP1) installed on Server 2012 with the Windows 8 ADK installed (I've also tried installing the Win7 WAIK with no change to the below problem). It is hosting the site server, FSP, AIS, and Endpoint protection roles. I
installed MDT 2012 Update 1 (build 6.1.2373.0) and installed ConfigMgr integration. I have a share
\\siteserver\bootimages that I'm creating the boot image to and the system account has full control on both the NTFS and Share permissions. When I create the boot image I get an error almost immediately and
a popup that the Microsoft.BDD.ElevatedProxy has stopped working. Details from the pop-up:
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: microsoft.bdd.elevatedproxy.exe
Problem Signature 02: 3.0.0.0
Problem Signature 03: 50400c36
Problem Signature 04: System.ServiceModel
Problem Signature 05: 3.0.0.0
Problem Signature 06: 4fee6b19
Problem Signature 07: fb9
Problem Signature 08: a7
Problem Signature 09: G3DT0URDW53KGT4VJDEEQCRAUIFCNTLL
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1033
The error in the boot image creation wizard is:
Started processing.
Creating boot image.
Error while importing Microsoft Deployment Toolkit Task Sequence.
System.ServiceModel.FaultException: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.
Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at INewBootImage.Create(String platform, String scratchSpace, String[] components, String[] extraContent, String wimFile)
at NewBootImageClient.Create(String platform, String scratchSpace, String[] components, String[] extraContent, String wimFile)
at Microsoft.BDD.Wizards.SCCM_ImportTaskSequenceTask.DoWork(SmsPageData smspageData, Dictionary`2 data)
I haven't found anything online on this particular error, I've seen all the ones about MDT 2012 and ConfigMgr 2012 CU 1. Any ideas? Any logs that may be revealing to the cause of this error? I've tried removing integration components, uninstalling MDT, reboot,
re-installing, etc, but same problem occurs each time.I just tried to create a new boot image again, the DISM.log file does not show any evidence of the attempt to create the boot wim, in fact nothing since 0800 this morning. The most recent logs are as follows:
2013-03-03 20:22:59, Info DISM PID=2252 TID=4312 Scratch directory set to 'C:\Windows\TEMP\'. - CDISMManager::put_ScratchDir
2013-03-03 20:22:59, Info DISM PID=2252 TID=4312 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
2013-03-03 20:22:59, Info DISM API: PID=2252 TID=4312 Leave CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2013-03-03 20:22:59, Info DISM API: PID=2252 TID=3088 Deleted g_internalDismSession - DismShutdownInternal
2013-03-03 20:22:59, Info DISM API: PID=2252 TID=3088 Shutdown SessionTable - DismShutdownInternal
2013-03-03 20:22:59, Info DISM API: PID=2252 TID=3088 Leave DismShutdownInternal - DismShutdownInternal
2013-03-03 20:22:59, Info DISM API: PID=2252 TID=3088 DismApi.dll:
- DismShutdownInternal
2013-03-03 20:22:59, Info DISM API: PID=2252 TID=3088 DismApi.dll: <----- Ending DismApi.dll session -----> - DismShutdownInternal
2013-03-03 20:22:59, Info DISM API: PID=2252 TID=3088 DismApi.dll:
- DismShutdownInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 DismApi.dll:
- DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 DismApi.dll: <----- Starting DismApi.dll session -----> - DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 DismApi.dll:
- DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 DismApi.dll: Version 6.2.9200.16384 - DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 DismApi.dll: Parent process command line: C:\Windows\system32\wbem\wmiprvse.exe - DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 Enter DismInitializeInternal - DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 Input parameters: LogLevel: 2, LogFilePath: (null), ScratchDirectory: (null) - DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 Initialized GlobalConfig - DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 Initialized SessionTable - DismInitializeInternal
2013-03-03 22:02:50, Info DISM API: PID=3544 TID=3672 Lookup in table by path failed for: DummyPath-2BA51B78-C7F7-4910-B99D-BB7345357CDC - CTransactionalImageTable::LookupImagePath
2013-03-03 22:02:51, Info DISM API: PID=3544 TID=3672 Waiting for m_pInternalThread to start - CCommandThread::Start
2013-03-03 22:02:51, Info DISM API: PID=3544 TID=4172 Enter CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2013-03-03 22:02:58, Info DISM API: PID=3544 TID=4172 Enter CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
2013-03-03 22:02:58, Info DISM API: PID=3544 TID=3672 CommandThread StartupEvent signaled - CCommandThread::WaitForStartup
2013-03-03 22:02:58, Info DISM API: PID=3544 TID=3672 m_pInternalThread started - CCommandThread::Start
2013-03-03 22:02:58, Info DISM API: PID=3544 TID=3672 Created g_internalDismSession - DismInitializeInternal
2013-03-03 22:02:58, Info DISM API: PID=3544 TID=3672 Leave DismInitializeInternal - DismInitializeInternal
2013-03-03 22:03:57, Info DISM API: PID=3544 TID=3672 Enter DismShutdownInternal - DismShutdownInternal
2013-03-03 22:03:57, Info DISM API: PID=3544 TID=3672 GetReferenceCount hr: 0x0 - CSessionTable::RemoveSession
2013-03-03 22:03:57, Info DISM API: PID=3544 TID=3672 Refcount for DismSession= 1s 0 - CSessionTable::RemoveSession
2013-03-03 22:03:57, Info DISM API: PID=3544 TID=3672 Successfully enqueued command object - CCommandThread::EnqueueCommandObject
2013-03-03 22:03:57, Info DISM API: PID=3544 TID=4172 ExecuteLoop: CommandQueue signaled - CCommandThread::ExecuteLoop
2013-03-03 22:03:57, Info DISM API: PID=3544 TID=4172 Successfully dequeued command object - CCommandThread::DequeueCommandObject
2013-03-03 22:03:59, Info DISM API: PID=3544 TID=4172 ExecuteLoop: Cancel signaled - CCommandThread::ExecuteLoop
2013-03-03 22:03:59, Info DISM API: PID=3544 TID=4172 Leave CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
2013-03-03 22:04:39, Info DISM PID=3544 TID=4172 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2013-03-03 22:04:39, Info DISM PID=3544 TID=4172 Scratch directory set to 'C:\Windows\TEMP\'. - CDISMManager::put_ScratchDir
2013-03-03 22:04:39, Info DISM PID=3544 TID=4172 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
2013-03-03 22:04:39, Info DISM API: PID=3544 TID=4172 Leave CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2013-03-03 22:04:39, Info DISM API: PID=3544 TID=3672 Deleted g_internalDismSession - DismShutdownInternal
2013-03-03 22:04:39, Info DISM API: PID=3544 TID=3672 Shutdown SessionTable - DismShutdownInternal
2013-03-03 22:04:39, Info DISM API: PID=3544 TID=3672 Leave DismShutdownInternal - DismShutdownInternal
2013-03-03 22:04:39, Info DISM API: PID=3544 TID=3672 DismApi.dll:
- DismShutdownInternal
2013-03-03 22:04:39, Info DISM API: PID=3544 TID=3672 DismApi.dll: <----- Ending DismApi.dll session -----> - DismShutdownInternal
2013-03-03 22:04:39, Info DISM API: PID=3544 TID=3672 DismApi.dll:
- DismShutdownInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 DismApi.dll:
- DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 DismApi.dll: <----- Starting DismApi.dll session -----> - DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 DismApi.dll:
- DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 DismApi.dll: Version 6.2.9200.16384 - DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 DismApi.dll: Parent process command line: C:\Windows\system32\wbem\wmiprvse.exe - DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 Enter DismInitializeInternal - DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 Input parameters: LogLevel: 2, LogFilePath: (null), ScratchDirectory: (null) - DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 Initialized GlobalConfig - DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 Initialized SessionTable - DismInitializeInternal
2013-03-04 08:41:07, Info DISM API: PID=1016 TID=1620 Lookup in table by path failed for: DummyPath-2BA51B78-C7F7-4910-B99D-BB7345357CDC - CTransactionalImageTable::LookupImagePath
2013-03-04 08:41:08, Info DISM API: PID=1016 TID=1620 Waiting for m_pInternalThread to start - CCommandThread::Start
2013-03-04 08:41:08, Info DISM API: PID=1016 TID=4176 Enter CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2013-03-04 08:41:09, Info DISM API: PID=1016 TID=4176 Enter CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
2013-03-04 08:41:09, Info DISM API: PID=1016 TID=1620 CommandThread StartupEvent signaled - CCommandThread::WaitForStartup
2013-03-04 08:41:09, Info DISM API: PID=1016 TID=1620 m_pInternalThread started - CCommandThread::Start
2013-03-04 08:41:09, Info DISM API: PID=1016 TID=1620 Created g_internalDismSession - DismInitializeInternal
2013-03-04 08:41:09, Info DISM API: PID=1016 TID=1620 Leave DismInitializeInternal - DismInitializeInternal
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=1620 Enter DismShutdownInternal - DismShutdownInternal
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=1620 GetReferenceCount hr: 0x0 - CSessionTable::RemoveSession
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=1620 Refcount for DismSession= 1s 0 - CSessionTable::RemoveSession
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=1620 Successfully enqueued command object - CCommandThread::EnqueueCommandObject
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=4176 ExecuteLoop: CommandQueue signaled - CCommandThread::ExecuteLoop
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=4176 Successfully dequeued command object - CCommandThread::DequeueCommandObject
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=4176 ExecuteLoop: Cancel signaled - CCommandThread::ExecuteLoop
2013-03-04 08:42:25, Info DISM API: PID=1016 TID=4176 Leave CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
2013-03-04 08:42:44, Info DISM PID=1016 TID=4176 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2013-03-04 08:42:44, Info DISM PID=1016 TID=4176 Scratch directory set to 'C:\Windows\TEMP\'. - CDISMManager::put_ScratchDir
2013-03-04 08:42:44, Info DISM PID=1016 TID=4176 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
2013-03-04 08:42:44, Info DISM API: PID=1016 TID=4176 Leave CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2013-03-04 08:42:44, Info DISM API: PID=1016 TID=1620 Deleted g_internalDismSession - DismShutdownInternal
2013-03-04 08:42:44, Info DISM API: PID=1016 TID=1620 Shutdown SessionTable - DismShutdownInternal
2013-03-04 08:42:44, Info DISM API: PID=1016 TID=1620 Leave DismShutdownInternal - DismShutdownInternal
2013-03-04 08:42:44, Info DISM API: PID=1016 TID=1620 DismApi.dll:
- DismShutdownInternal
2013-03-04 08:42:44, Info DISM API: PID=1016 TID=1620 DismApi.dll: <----- Ending DismApi.dll session -----> - DismShutdownInternal
2013-03-04 08:42:44, Info DISM API: PID=1016 TID=1620 DismApi.dll:
- DismShutdownInternal
2013-03-05 08:44:10, Info DISM API: PID=4140 TID=3140 DismApi.dll:
- DismInitializeInternal
2013-03-05 08:44:12, Info DISM API: PID=4140 TID=3140 DismApi.dll: <----- Starting DismApi.dll session -----> - DismInitializeInternal
2013-03-05 08:44:12, Info DISM API: PID=4140 TID=3140 DismApi.dll:
- DismInitializeInternal
2013-03-05 08:44:12, Info DISM API: PID=4140 TID=3140 DismApi.dll: Version 6.2.9200.16384 - DismInitializeInternal
2013-03-05 08:44:12, Info DISM API: PID=4140 TID=3140 DismApi.dll: Parent process command line: C:\Windows\system32\wbem\wmiprvse.exe - DismInitializeInternal
2013-03-05 08:44:12, Info DISM API: PID=4140 TID=3140 Enter DismInitializeInternal - DismInitializeInternal
2013-03-05 08:44:12, Info DISM API: PID=4140 TID=3140 Input parameters: LogLevel: 2, LogFilePath: (null), ScratchDirectory: (null) - DismInitializeInternal
2013-03-05 08:44:12, Info DISM API: PID=4140 TID=3140 Initialized GlobalConfig - DismInitializeInternal
2013-03-05 08:44:13, Info DISM API: PID=4140 TID=3140 Initialized SessionTable - DismInitializeInternal
2013-03-05 08:44:13, Info DISM API: PID=4140 TID=3140 Lookup in table by path failed for: DummyPath-2BA51B78-C7F7-4910-B99D-BB7345357CDC - CTransactionalImageTable::LookupImagePath
2013-03-05 08:44:14, Info DISM API: PID=4140 TID=3140 Waiting for m_pInternalThread to start - CCommandThread::Start
2013-03-05 08:44:14, Info DISM API: PID=4140 TID=640 Enter CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2013-03-05 08:44:32, Info DISM API: PID=4140 TID=3140 CommandThread StartupEvent signaled - CCommandThread::WaitForStartup
2013-03-05 08:44:32, Info DISM API: PID=4140 TID=3140 m_pInternalThread started - CCommandThread::Start
2013-03-05 08:44:32, Info DISM API: PID=4140 TID=3140 Created g_internalDismSession - DismInitializeInternal
2013-03-05 08:44:32, Info DISM API: PID=4140 TID=3140 Leave DismInitializeInternal - DismInitializeInternal
2013-03-05 08:44:32, Info DISM API: PID=4140 TID=640 Enter CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=1320 Enter DismShutdownInternal - DismShutdownInternal
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=1320 GetReferenceCount hr: 0x0 - CSessionTable::RemoveSession
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=1320 Refcount for DismSession= 1s 0 - CSessionTable::RemoveSession
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=1320 Successfully enqueued command object - CCommandThread::EnqueueCommandObject
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=640 ExecuteLoop: CommandQueue signaled - CCommandThread::ExecuteLoop
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=640 Successfully dequeued command object - CCommandThread::DequeueCommandObject
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=640 ExecuteLoop: Cancel signaled - CCommandThread::ExecuteLoop
2013-03-05 08:45:56, Info DISM API: PID=4140 TID=640 Leave CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
2013-03-05 08:46:18, Info DISM PID=4140 TID=640 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2013-03-05 08:46:18, Info DISM PID=4140 TID=640 Scratch directory set to 'C:\Windows\TEMP\'. - CDISMManager::put_ScratchDir
2013-03-05 08:46:18, Info DISM PID=4140 TID=640 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
2013-03-05 08:46:18, Info DISM API: PID=4140 TID=640 Leave CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2013-03-05 08:46:18, Info DISM API: PID=4140 TID=1320 Deleted g_internalDismSession - DismShutdownInternal
2013-03-05 08:46:18, Info DISM API: PID=4140 TID=1320 Shutdown SessionTable - DismShutdownInternal
2013-03-05 08:46:18, Info DISM API: PID=4140 TID=1320 Leave DismShutdownInternal - DismShutdownInternal
2013-03-05 08:46:18, Info DISM API: PID=4140 TID=1320 DismApi.dll:
- DismShutdownInternal
2013-03-05 08:46:18, Info DISM API: PID=4140 TID=1320 DismApi.dll: <----- Ending DismApi.dll session -----> - DismShutdownInternal
2013-03-05 08:46:18, Info DISM API: PID=4140 TID=1320 DismApi.dll: -
Slow Imaging on Lenovo T430 with MDT 2012 Update 1
I am having an issue where laying down the operating system (Custom WIM, Windows 7 x64 about 3GB in size) to a Lenovo T430 machines using MDT 2012 Update 1 is slow. The install operating system/applying image, seems to hang around 20%, this process takes anywhere from 10-20 minutes to complete before DISM applies the unattend file. While the process is “hung” the hard drive light on the laptop is solid, so I assume something is going on but I still do not understand why the process seems to hang. When I image an older Lenovo T410 laptop the WIM is layed down in about in about 5 minutes. So it seems strange to me that a new laptop model would be slower. I added new network card drivers and storage device drivers to out of box drivers and updated my deployment share. I am currently using a lite touch deployment, so I extracted the ISO to a bootable USB stick.
I thought this was a driver issue but I am not sure now. Anyone else see anything like this? Below is a screenshot of the process I am talking about, although like I said above, it seems to hang around 20% or so.
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum RulesI'm experiencing the same issue with our latest batch of T430s laptops, using SCCM 2007 to deploy a custom WIN7SP1 x64 image:
With the 1st shipment of T430s' we received (Type: 2355-CE8), our image deploys to a system in 31 minutes total. The WIM download + apply stage with this model takes 7 minutes during the deployment.
With the 2nd shipment of T430s' we received (Type: 2355-2G8), our image deploys to a system in 97 minutes total. The WIM download + apply stage with this model takes 72 minutes during the deployment.
Aside from an additional stick of memory and a backlit keyboard, these two shipments should've been identical. A quick device manager comparison of the two types shows only one major difference: the Type 2355-CE8 systems use a Micron SSD (C400-MTFDDAK128MAM) where as the Type 2355-2G8 use a Toshiba SSD (THNSNF128GCSS).
If I swap the Micron SSD (from a Type 2355-CE8 system) into one of the Type 2355-2G8 systems and re-image it, deployment now takes 33 minutes total, and the WIM + download stage takes 8 minutes during the deployment.
A 2-3 minute difference (total deployment time) is acceptable, but a 60+ minute difference is not. -
MDT 2012 Update 1 - Deployment - Auto Login won't Disable
Hello,
I am using MDT 2012 Update 1 with an almost vanilla Windows 8.1 and Windows 7 test box. I can deploy both images fine and get a success on my summary but both machines continue to auto login to the Administrator account. To my understanding, the Auto Login
should be shutoff via the LTIcleanup script. When I double check the script for the reg keys that are added/deleted I can confirm that this is happening but the images still continue to auto login to the admin account.
Anyone have any ideas?Thought I would let those who are interested know. After speaking with Microsoft Premier Support they determined that you must have a password on the Administrator account. If you don't then something goofs up and causes the auto logon issues that I was
having. -
User State Migration Data Capture Failure MDT 2012 Update 1
Hello All
Trying to capture data on a Win7 x64 machine so that I can keep the data and restore once the computer is done re-imaging. This is an offline MDT deployment on the same computer. See the error below:
CNAME loop detected. (Error: 000025EB; Source: Windows)
Using MDT 2012 Update 1Lots of good information out there. Even stuff that says it's for MDT 2010 also applies to MDT 2012 Update 1 for the most part. Here's a few to get you started:
http://deployment.xtremeconsulting.com/2009/11/20/understanding-usmt-with-mdt-2010/
http://technet.microsoft.com/en-us/magazine/jj127984.aspx
http://blogs.technet.com/b/mniehaus/archive/2009/07/01/mdt-2010-new-feature-12-usmt-4-0-hardlink-support.aspx
http://www.windows-noob.com/forums/index.php?/topic/3758-usmt-mdt/
http://channel9.msdn.com/Events/MMS/2013/DC-B301 (great video with Johan presenting, focused on USMT 5.0)
You should create a default Standard Client Task Sequence and look at the State Capture and State Restore groups to see what MDT sets up for you by default that you may have removed from your current Task Sequence. But the direct answer to your question,
is that ScanState (part of USMT) is the part that creates a backup. LoadState is the piece that restores it to a machine.
David Coulter | http://DCtheGeek.blogspot.com |
@DCtheGeek -
Deploy windows8 with custom partition using MDT 2012 update 1
Hi,
I am deploying windows 8 using MDT 2012 update 1 on SCCM 2012. I want C drive (to be quick format using task sequence) and D drive (remains same) on new system. While using diskpart , my D drive always get format . Can anyone suggest the steps.
Regards
ManishHi,
You could try steps in the following blog.
http://arnavsharma.net/4/post/2014/02/mdtformatting-only-c-drive-during-upgrade.html
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
MDT 2012 Update 1 - Attempting to capture Windows Thin PC but it keeps looping after reboot.
I have been trying to capture a master image of Windows Thin PC we have prepared using MDT 2012 Update 1 but to no avail. When attempting the capture process using LiteTouch.vbs it syspreps and then reboots as it normally would and then it simply keeps rebooting
over and over in a loop.
I am unsure of how to bypass this and correctly capture Windows Thin PC using MDT 2012 Update 1. If anyone has any advice or feedback they can offer I would greatly appreciate it. Thank you.Logs suggest that the script is most likely crashing early on.
I suspect that the reason for this is that the deployment share was *updated* from a previous version of MDT, and some files are out of date.
Can you update the share (full update, regenerate from scratch?)
Otherwise we may need to run Litetouch.wsf manually from within WinPE:
When WinPE Boots and you have a mouse, press F8.
Run TaskMgr.exe and verify that wscript.exe is no longer running (wait 2 minutes).
Then run the following command:
"cscript.exe x:\deploy\scripts\litetouch.wsf /debug:true /debugcapture"
That should run the litetouch.wsf script and it should display any errors if found.
Keith Garner - keithga.wordpress.com -
Windows Vista is not installing using MDT 2012 update 1
I have created a media using selection profile in MDT 2012 update 1, but it is not deploying my physical machine. I get error message that Windows Cannot copy files required for installation. Make Sure all files required for installations are available.
However i have successfully deployed Windows & and Windows XP with MDT 2012.
I also used different iso image of vista but still i get same error message.Looks like you have a *NEW* issue that is unrelated to this thread. Generally I recommend that you open a new thread.
How to Debug missing Drivers in MDT Litetouch
I see that you say there are *Problems* but you don't list which devices or drivers are missing.
From your Bdd.log file I can see that the following drivers are getting copied locally:
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\Net\e1c60x64_12.6.45.0_63DFBEA09BC1202B9E644652FC90898475BD80F6" "C:\Drivers\Net\e1c60x64_12.6.45.0_63DFBEA09BC1202B9E644652FC90898475BD80F6"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\Net\e1c62x64_12.6.45.0_81A271BF21927B572C82D21D23EF89BD7E0ED315" "C:\Drivers\Net\e1c62x64_12.6.45.0_81A271BF21927B572C82D21D23EF89BD7E0ED315"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\Net\e1c63x64_12.6.45.0_5B2448F2D9E89D0D8A718B71175BC6A559C8DC6A" "C:\Drivers\Net\e1c63x64_12.6.45.0_5B2448F2D9E89D0D8A718B71175BC6A559C8DC6A"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\System\2008s4el_9.1.9.1005_2CA3E45C2F9AFCC12681EC010E1D73FEA7613AA9" "C:\Drivers\System\2008s4el_9.1.9.1005_2CA3E45C2F9AFCC12681EC010E1D73FEA7613AA9"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\System\cdvcore_9.2.2.1039_5676255595E54B75DA4EBCF4BB54B7CBA83C68D4" "C:\Drivers\System\cdvcore_9.2.2.1039_5676255595E54B75DA4EBCF4BB54B7CBA83C68D4"
However I can't tell what the problem is.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com -
USMT 4 Wrong version error - MDT 2012 update 1
Hi,
we are in process of Migrating XP to windows 7, i have prepared a media using MDT 2012 update 1 and WAIK,
When i started deployment using the DVD i am getting the following error message
" The USMT Files in e:\..\..\x86\USMT4 are the wrong version. failure 9701.
When i checked in the above mentioned path i can see the USMT 4 folder with all required files inside it and i even compared the folder with USMT4 folder of c:\program files\WAIK instllation folder and i did not find any difference between them.
When i tested the deployment from the share folder by accessing (\\itd-mig\deploymentshare$) i was able to migrate without any error.
Can any one help me to find out what is the error about.
Thanks in advance.
D. Sendil KumarUgh...
ValidateCaptureLocation is a function in the Deployment Wizard, the wscript object is *not* available from within the MSHTA environment, so be careful.
Instead of:
wscript.sleep 5000
use this instead:
outility.SafeSleep 5000
Is your DHCP server slow?
Keith Garner - keithga.wordpress.com -
Windows 7 Image Deployment Failed in HP model D530 using MDT 2012 and ADK 8.0
Hi,
I need your help to sort out the following issue.
I have installed MDT 2012 +ADK 8.0 and created Windows 7 32 bit OS from CD in the deployment share and tried deploying the raw OS from Deployment Share in to a reference machine (HP D530) ,the deployment failed also couldn't able to capture
Image from the machine,even the sysprep failed. This is the error
Your PC needs to restart.
Please hold down the power button.
Error Code:0x0000005D
Parameters:
0x030F0209
0x746E6547
0X49656E69
0X6C65746E
So tried the same in another HP machine ,the deployment was success and also was able to capture the refrence machine.
Need your help to find why this error occurred in this specific HP model D530 alone. Is it the reason that ADK was not supported in that specific model.
D530 is the maximum available HW model in client environment so your help will be much appreciated.
Thanks in Advance!!I have never seen that error before (see identical post). I did a quick internet search and found the following:
http://optimizewindows8.wordpress.com/2013/03/26/how-to-fix-error-code-0x0000005d/
Either:
1) Upgrade your machines with modern processors that support the ADK.
or
2) Downgrade to the WAIK
http://www.microsoft.com/en-us/download/details.aspx?id=5753 and stick with Windows 7.
Keith Garner - keithga.wordpress.com -
Deployed Windows 7 Image failing to start -SCCM 2012 SP1
Hello, I am deploying windows 7 image using SCCM 2012 SP1, the installation goes thru fine but when it is in the process of restart, a blue screen is displayed for a split second and then it tries to reboot again with same results. Are there any logs on
the SCCM server I can check to see where the problem may be?This generally means inaccessible boot device. How are you partitioning the drive and applying the image?
This is one way to do it
http://www.gerryhampsoncm.blogspot.ie/2013/02/sccm-2012-sp1-step-by-step-guide-part_18.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
MDT 2012 - Update Deploymentshare: Unable to open the specified WIM file
Hi @ all
wie have updated our Litetouch boot image using DISM and know we try to update the deploymentshare but we get the following error.
=== Making sure the deployment share has the latest x86 tools ===
=== Processing LiteTouchPE (x86) boot image ===
Building requested boot image profile.
System.Management.Automation.CmdletInvocationException: Unable to open the specified WIM file. ---> System.Exception: Unable to open the specified WIM file. ---> System.ComponentModel.Win32Exception: The system cannot find the file specified
--- End of inner exception stack trace ---
at Microsoft.BDD.Core.BDDWimFile..ctor(String wimPath, Boolean forUpdate)
at Microsoft.BDD.PSSnapIn.UpdateDeploymentPoint.UpdateBootImage(String template, String platform, String dpPath, Boolean createISO, String isoName)
at Microsoft.BDD.PSSnapIn.UpdateDeploymentPoint.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper()
at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc()
Unable to open the specified WIM file? The image ist is stil in the boot folder.
Anybody an idea or an solution for that problem?
Thank's
AdrianI had installed ADK to utilize the latest and greatest DISM tool. That broke WAIK and the boot.wim could not be found when updating the deployment shares. Thanks for the pointer...
Paul Prindle MCP, A+
That is because WAIK and ADK are unsupported as side-by-side installations.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
How to ask a question that is fixable. -
Failed to install drivers in Windows Vista using MDT 2012 update 1
I am trying to deploy physical machine with Windows vista along with drivers. After completion of deployment i see deployment is successful with no error and warnings, but it still do not install driver in the machine. To test weather i have selected correct
driver i checked manual installation of drivers and this install the driver in the machine. But the drivers are not installing when i am tried to install driver using MDT. In windows 7 and Windows XP drivers are installed correctly but not in Windows Vista.
I have shared my log files in one drive. Please look this and tell what mistake i am doing.
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!107
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!109
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!108
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!110
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!112
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!111
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!114
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!113Can you be specific as to what drivers are not installing? An issue that can be had when doing PNPEnum is that child devices of something that does not have a driver installed are not visible to the PNPEnum. A way to get around that is you can force the
injection of drivers that are not getting installed. Something like you can add a second Inject Driver step but, have it be a selection profile of drivers that always get missed because they are children.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
MDT 2012 update 1 auto login not working after recover from domain
I have two domains. The old domain is a single label domain and when running the deployment task sequence it joins the domain and auto logs in as local admin no problem. When I change the same task sequence to join the new . local domain the pc joins
the domain but fails to login as local admin. I get unknown user name or password. I hit ctrl +ALt+del and it is trying to login as the domain\administrator. Local admin password is correct in the unattend.xml. I have the PC's going to the "computers"
Container when joining the domain. Any help would be much appreciated.I have Administrator as the user . as the domain and the correct password. When the deployment fails to login the username is "domain"\administrator. Anywhere else I should be looking???
-
SCCM 2007 with MDT 2012 Update 1 - LTI Build Process - "UserLocale" setting is all lowercase.
Greetings all. I'm trying to resolve a situation where the "UserLocale" property is being set to "en-us" opposed to "en-US". Quick environment stats: SCCM 2007, MDT2010, using LTI build process with a
custom UDI. 2 Build Sites (customer build sites), both sites have branch distribution points.
Both sites are performing the exact same LTI builds. Same task sequence.
Both sites have MDT location records that have the "UserLocale" property defined as "en-US".
Both sites successfully build the same LTI build, but post build; Site A has correct UserLocale entry of "en-US", while Site B does not have correct UserLocale entry - it is set to "en-us". This wouldn't normally be a big
deal, however we have an enterprise application that is hard coded to look for case specific property of "en-US", so this application does not function as desired as Site B.
Both builds use the same task sequence, same OS.WIM (Windows 7 x86), and same unattend.xml. The unattend.xml does have UserLocale specified as "en-US" (and also the MDT location records for Site A and Site B both have "UserLocale"
property defined as "en-US", so I do not understand where the lowercase "en-us" is being populated from during the client build for Site B, when it works correctly for Site A?
Bdd.log for client build at Site A shows:
Obtained USERLOCALE value from SQL: USERLOCALE = en-USUpdated
C:\WINDOWS\panther\unattend\unattend.xml with UserLocale=en-US (value was en-US)
Property USERLOCALE is now = en-US
Bdd.log for client build at Site B shows:
Obtained USERLOCALE value from SQL: USERLOCALE = en-US
Property UserLocale_Edit is now = en-us;0409
Property UserLocale is now = en-us
Value for USERLOCALE is already set to en-us so database value of en-US will be ignored.
Updated C:\WINDOWS\panther\unattend\unattend.xml with UserLocale=en-us (value was en-US)
Value for USERLOCALE is already set to en-us so database value of en-US will be ignored.
Can anyone offer insight as to my next troubleshooting steps? I'm not sure why Site B, bdd.log - unattend.xml shows updating UserLocale to en-us instead of en-US?
(Please note I have verified that the OS.WIM, unattend.xml, and all MDT scripts that run during task sequence execution are exact matches on the BDP's for each site. Same size, date, and content)Well, there must be something that is different... If you zip up the logs (all of them) from each setup, and mail them to me, I can take a quick look.
/ Johan
Regards / Johan Arwidmark Twitter: @jarwidmark Blog: http://www.deploymentresearch.com FB: www.facebook.com/deploymentresearch
Maybe you are looking for
-
Hi I have a web service which return the response based on the request key. I need to save the key and the response value in cache for around 30mins to reduce the web service calls for better performance. Appreciate if any once can share a sample co
-
Customize the color of bars in chart
Hi All, How to customize the color of a simple bars in a simple bar chart having Year and Sales as measure so that for each year different color is generated? Thanks, Sushil
-
How to delete albums off iphone
I need to delete my photo albums off my iphone and I don't want them to load form my iphoto program in the future, how dod I do this?
-
Suggested workaround for list itemrenderer bug?
Can someone point me in the right direction for a workaround for the problem described as Flex bug 28191: https://bugs.adobe.com/jira/browse/SDK-28191 Steps to reproduce: 1. Populate a Tree/List with data and provide a custom itemRenderer class facto
-
How can I transfers events from Mac pro to iPad
I try sync my iPad to transfer photos and it does . But there are some pictures that haven't been transferred. There all in the events . What can I do to transfer them , there not even in photo section only in events. What can I do. I tried iTunes an